MorenoAv Posted July 6, 2020 Share Posted July 6, 2020 Hi @eSaF, In first place congratulations are in order, and in second place can you share your EFI, please? My results are very frustrating the SIGABRT plague follows me ... Thanks Link to comment https://www.insanelymac.com/forum/topic/344428-pre-release-macos-big-sur/page/6/#findComment-2728944 Share on other sites More sharing options...
lottenow Posted July 6, 2020 Share Posted July 6, 2020 1 hour ago, mnfesq said: Several people, myself, included, have stated here that they can boot to the installer but that the installer does not see any of their SATA drives. Mine also does not see my M.2 SSD drive. It does, however, see any USB drives I connect to my laptop. The boot log I see when I try to boot to the installer ends with this before going to the start menu of the installer: IOAHCIBlockStorageDriver: could not recover SATA HDD after 5 attempts, terminating disk0s1: no such device. IOAHCIBlockStorageDriver: could not recover SATA HDD after 5 attempts, terminating disk1s1: no such device. I had the same problem when I booted into an installation of Big Sur made on a real Mac and, because of it, could not restore the installation to the partition on my SSD I had prepared for it. Perhaps this is related to the UUID for the drives and that there is a check that can be bypassed with a boot arg. Anyone? @mnfesq : I have tried with ApfsDriverLoader.efi from here, but it still does not show any internal disks. Is this a bug related to M.2 SATA SSDs? Link to comment https://www.insanelymac.com/forum/topic/344428-pre-release-macos-big-sur/page/6/#findComment-2728945 Share on other sites More sharing options...
Max.1974 Posted July 6, 2020 Share Posted July 6, 2020 Hi all, i succeded too instal Big Sur with Premade EFI from Olarila.com thanks a lot to @MaLd0n this is guy work hard, deserve so much be recognize, and the same way, all of the great developers from this community. My Desktop from signature: Z170-XP_SLi... Spoiler 2 Link to comment https://www.insanelymac.com/forum/topic/344428-pre-release-macos-big-sur/page/6/#findComment-2728947 Share on other sites More sharing options...
Sanom4 Posted July 6, 2020 Share Posted July 6, 2020 You guys are best. Thanks devs for OC Update. Switched to OC from Clover. Had to research a lot of OC Docs and applelife forum was really tiresome, but after tweaking for a while managed to run it smoothly. Spoiler 1 Link to comment https://www.insanelymac.com/forum/topic/344428-pre-release-macos-big-sur/page/6/#findComment-2728948 Share on other sites More sharing options...
MorenoAv Posted July 6, 2020 Share Posted July 6, 2020 (edited) Hi @Max.1974, I tried with a pre made EFI folder from Olarila and didn't work... but my appreciation and thanks from all the work @MaLd0n, does for the community, and for me. Saudações portuguesas Edited July 6, 2020 by MorenoAv 1 1 Link to comment https://www.insanelymac.com/forum/topic/344428-pre-release-macos-big-sur/page/6/#findComment-2728949 Share on other sites More sharing options...
nomadturk Posted July 7, 2020 Share Posted July 7, 2020 Success on Asrock AB350 PRO4, Ryzen 1200, GTX 680 Spoiler Link to comment https://www.insanelymac.com/forum/topic/344428-pre-release-macos-big-sur/page/6/#findComment-2728951 Share on other sites More sharing options...
SavageAUS Posted July 7, 2020 Share Posted July 7, 2020 Morning all, so i have build new OC, new kexts and i can make it further in the USB installer but still not very far until i get the shown KP. Boot args: -v -lilubetaall vsmcgen=1 Laptop specs in signature. Spoiler Link to comment https://www.insanelymac.com/forum/topic/344428-pre-release-macos-big-sur/page/6/#findComment-2728952 Share on other sites More sharing options...
ilmix Posted July 7, 2020 Share Posted July 7, 2020 hi all happy to see all this big good news! i have a ryzentosh i try to boot big sur with the new specs but AmdRyzenCpuPowerManagement kext kp @nomadturk how do you do to boot properly? thanks! Link to comment https://www.insanelymac.com/forum/topic/344428-pre-release-macos-big-sur/page/6/#findComment-2728954 Share on other sites More sharing options...
SavageAUS Posted July 7, 2020 Share Posted July 7, 2020 @eSaF Thanks for the tip but removing that boot arg did not help, same KP. config.plist Link to comment https://www.insanelymac.com/forum/topic/344428-pre-release-macos-big-sur/page/6/#findComment-2728955 Share on other sites More sharing options...
Cephalotus Posted July 7, 2020 Share Posted July 7, 2020 anyone know how to solve this? after this last message the screen goes black and without signal https://www.mediafire.com/view/zdfabvkjnfx4rl7/WhatsApp_Image_2020-07-06_at_21.53.12.jpeg/file Link to comment https://www.insanelymac.com/forum/topic/344428-pre-release-macos-big-sur/page/6/#findComment-2728961 Share on other sites More sharing options...
bisdak4920 Posted July 7, 2020 Share Posted July 7, 2020 I was able to boot my usb installer and install. When I reboot and start macos installer, this is what i got. Please help. Link to comment https://www.insanelymac.com/forum/topic/344428-pre-release-macos-big-sur/page/6/#findComment-2728964 Share on other sites More sharing options...
SavageAUS Posted July 7, 2020 Share Posted July 7, 2020 (edited) Success! USB install to internal SSD on my laptop. config.plist attached. Installation took a while (i mean a while) and stalled on a few parts but be patient. So far with limited testing WiFi is the only thing not working (DW1820A) and trackpad is not recognised (But works) Still need to test CPU PM, battery status, sleep, lid and a few other things. Great work to the devs of OC. config.plist Now when i boot into Catalina though i have this drive mounted? Spoiler Spoiler Spoiler Spoiler Spoiler Spoiler Spoiler Spoiler Spoiler Edited July 8, 2020 by SavageAUS 2 Link to comment https://www.insanelymac.com/forum/topic/344428-pre-release-macos-big-sur/page/6/#findComment-2728966 Share on other sites More sharing options...
iGPU Posted July 7, 2020 Share Posted July 7, 2020 9 hours ago, manmo71 said: Reveal hidden contents @Cyberdevs I had enabled HideAuxillary=YES, making that NO fixed the missing Reset NVRAM option. Thank you. If you leave as "No" and using OpenCanopy, you can still access the hidden items. By pressing the "Space" bar on your keyboard, the hidden items are toggled visible/hidden. Link to comment https://www.insanelymac.com/forum/topic/344428-pre-release-macos-big-sur/page/6/#findComment-2728968 Share on other sites More sharing options...
fusion71au Posted July 7, 2020 Share Posted July 7, 2020 (edited) Successfully installed macOS Big Sur Beta1 on my Skylake NUC6i5SYH, thanks to the latest OC 0.6.0. Much kudos to acidanthera devs for their hard work to enable native booting of the BS installer from KernelCollections !!! Spoiler Notes USB Installer made with createinstallmedia method Compiled latest OC 0.6.0 from GIT Hub Also compiled latest Lilu v1.4.6 and WhateverGreen v1.4.1 kexts to avoid kernel panic and black screen before login screen Recommend to set Kernel/Quirks/PanicNoKextDump to YES in config.plist to troubleshoot problematic kexts if kernel panic occurs To disable authenticated root SIP in Big Sur (so can play around with system files), I set csr-active-config in OC config.plist to 0x77080000, then reset NVRAM through the OC boot menu —> csr-active-config w%08%00%00 Catalina kexts for my Edimax EW-7811UTC AC600 wireless USB (based on Realtek rtl8812 chipset) still work well in Big Sur OC 0.6.0 for Skylake NUC6i5SYH.zip Edited July 14, 2020 by fusion71au 4 1 Link to comment https://www.insanelymac.com/forum/topic/344428-pre-release-macos-big-sur/page/6/#findComment-2728969 Share on other sites More sharing options...
manmo71 Posted July 7, 2020 Share Posted July 7, 2020 Spoiler @iGPU Thank you for that tip. Shall try it out some time. Link to comment https://www.insanelymac.com/forum/topic/344428-pre-release-macos-big-sur/page/6/#findComment-2728970 Share on other sites More sharing options...
RGarrido Posted July 7, 2020 Share Posted July 7, 2020 18 hours ago, SavageAUS said: I think i'll wait for Dortania to update the guide. I cannot get the USB installer to work and i don't know what the KP means. Reveal hidden contents EFI.zip It was happening the same with me, but I rapidly realized it was the kexts. It’s something from the network or Bluetooth drivers, but I’ll try tomorrow 1 by 1 to see the problem. I’m using Intel AX200 and Realtek PCIe GB, with kexts “itlwmx” and “RTL8111”, respectively. As for the Bluetooth, I’m using “IntelBluetoothFirmware” Coffee lake here 1 Link to comment https://www.insanelymac.com/forum/topic/344428-pre-release-macos-big-sur/page/6/#findComment-2728975 Share on other sites More sharing options...
dhani Posted July 7, 2020 Share Posted July 7, 2020 (edited) On 6/22/2020 at 4:56 PM, Skyfallkavu said: Oh wow, I just checked on my Catalina beta enrolled system and it's available without me doing anything. They really are just using this pref. Those braver than me, good luck. I try both using betaaccess.dmg and use this command, but in my Catalina update page, I only see the macOS Catalina Beta 10.15.6? I don't see this BigSur...what to do? Should I install that Catalina Beta first? Spoiler Edited July 7, 2020 by Allan Spoiler tag! Link to comment https://www.insanelymac.com/forum/topic/344428-pre-release-macos-big-sur/page/6/#findComment-2728976 Share on other sites More sharing options...
RGarrido Posted July 7, 2020 Share Posted July 7, 2020 (edited) 7 hours ago, dhani said: I try both using betaaccess.dmg and use this command, but in my Catalina update page, I only see the macOS Catalina Beta 10.15.6? I don't see this BigSur...what to do? Should I install that Catalina Beta first? Spoiler I’m seeing that too, my last hope was to download directly from Apple with gibmacOS Edited July 7, 2020 by Allan Spoiler tag! Link to comment https://www.insanelymac.com/forum/topic/344428-pre-release-macos-big-sur/page/6/#findComment-2728977 Share on other sites More sharing options...
Cephalotus Posted July 7, 2020 Share Posted July 7, 2020 (edited) I managed to get pass the installation, but when I restart the PC to go to the system configuration, I get this error http://www.mediafire.com/view/r913omt78zbkufc/photo_2020-07-07_04-05-59.jpg/file anyone knows how to solve this? Edited July 7, 2020 by Cephalotus add link 1 Link to comment https://www.insanelymac.com/forum/topic/344428-pre-release-macos-big-sur/page/6/#findComment-2728978 Share on other sites More sharing options...
dannyboy9 Posted July 7, 2020 Share Posted July 7, 2020 (edited) 6 hours ago, RGarrido said: I’m seeing that too, my last hope was to download directly from Apple with gibmacOS Update your SMBIOS to a Big Sur compatible machine 6 hours ago, dhani said: I try both using betaaccess.dmg and use this command, but in my Catalina update page, I only see the macOS Catalina Beta 10.15.6? I don't see this BigSur...what to do? Should I install that Catalina Beta first? Spoiler Edited July 7, 2020 by Allan Spoiler tag! Link to comment https://www.insanelymac.com/forum/topic/344428-pre-release-macos-big-sur/page/6/#findComment-2728980 Share on other sites More sharing options...
SavageAUS Posted July 7, 2020 Share Posted July 7, 2020 Does anyone have a way to get the DW1820A WiFi card working in Big Sur? Link to comment https://www.insanelymac.com/forum/topic/344428-pre-release-macos-big-sur/page/6/#findComment-2728981 Share on other sites More sharing options...
dannyboy9 Posted July 7, 2020 Share Posted July 7, 2020 Just now, eSaF said: I think your problem has something to do with System Management Controller, try restarting the machine but clean NVRAM first before installing. Good luck. Did your Big Sur finally boot? Link to comment https://www.insanelymac.com/forum/topic/344428-pre-release-macos-big-sur/page/6/#findComment-2728983 Share on other sites More sharing options...
dannyboy9 Posted July 7, 2020 Share Posted July 7, 2020 9 minutes ago, eSaF said: @dannyboy9 - Yes Sir!!!! - Credit to you and Pavo I forgot to define NVMefix in the plist. Hope you have done that if you seem to be using one! With my USB, that SIGABRT error is pretty annoying inspite of AllowNVRAMReset=True Link to comment https://www.insanelymac.com/forum/topic/344428-pre-release-macos-big-sur/page/6/#findComment-2728986 Share on other sites More sharing options...
crazybirdy Posted July 7, 2020 Share Posted July 7, 2020 (edited) On 7/7/2020 at 2:48 PM, dhani said: I try both using betaaccess.dmg and use this command, but in my Catalina update page, I only see the macOS Catalina Beta 10.15.6? I don't see this BigSur...what to do? Should I install that Catalina Beta first? Spoiler You can use this script to download full installer app from swscan.apple.com. installScript_110fullapp.zip Spoiler Edited September 17, 2020 by crazybirdy auto-update 4 3 Link to comment https://www.insanelymac.com/forum/topic/344428-pre-release-macos-big-sur/page/6/#findComment-2728988 Share on other sites More sharing options...
RGarrido Posted July 7, 2020 Share Posted July 7, 2020 32 minutes ago, dannyboy9 said: Update your SMBIOS to a Big Sur compatible machine But I’m using MacBookPro16,1, that’s the 2019 MacBook Pro 16”, right? Link to comment https://www.insanelymac.com/forum/topic/344428-pre-release-macos-big-sur/page/6/#findComment-2728990 Share on other sites More sharing options...
Recommended Posts