Jump to content
InsanelyMac Forum

nomadturk

Members
  • Content count

    26
  • Joined

  • Last visited

About nomadturk

  • Rank
    InsanelyMac Protégé
  1. nomadturk

    MBR patch: how to patch?

    Thank you! It is work.
  2. nomadturk

    MBR patch: how to patch?

    Can we use the Disk2UUIDmodify script over the Terminal in the MacOS installation screen?
  3. nomadturk

    Mac os High sierra installation attempts

    You should correct in code; --noiteraction is false. it must be --nointeraction
  4. I didn't say I use any kext for HWP. Just in Clover; HWPEnable= True / HWP Value= 0x80002A01
  5. Actually, I tried before with clover method without SSDTPrgen. I activated the HWP using 0x80002A01 value for i76700K. Then when i check it with AppleIntelInfo.kext HWP has enabled. However, once the system wakes up, I realise that HWP is not enabled. Did you check that HWP is active after system wakes?
  6. Does this method work with iMac 17.1 SMBIOS?
  7. nomadturk

    'Blank' Trackpad Setting in Sierra

    Check this guide: http://x220.mcdonnelltech.com/thinkpad-x220-macos-sierra-installation/ Follow Part 4, Step 34
  8. nomadturk

    AppleLPC not loading on ElCapitan

    I have same problem. When i checked Power Management with AppleInfo.kext by Pike, It seems the speedstep work, but AppleLPC not loading. I'm attached DSDT,Config and ioreg. Thank you! https://db.tt/aqyfFrxj
  9. nomadturk

    Apple unveils "macOS Sierra"

    Success installation. Ethernet, ALC888,Wi-Fi, Sleep / Wake are work. Core 2 Quad q8300 GTX 560ti
  10. nomadturk

    Asus Z170-Deluxe And You!

    Clover_v2.3k_Special E... http://www.insanelymac.com/forum/files/file/11-pandoras-box/
  11. nomadturk

    Asus Z170-Deluxe And You!

    For bluetooth: https://bitbucket.org/RehabMan/os-x-brcmpatchram For Audio: New Pandora's Box III is out Power Management for i7 6700K: ssdtPRGen.sh 121 Script to generate a SSDT for Power Management All you need is make a USB installer USB image with 10.11.4, read guide and use the EFI files from first message and set the BIOS settings below: VT-d setting= Disable CFG-Lock= Disable SecureBoot= Disable ( Other OS ) XHCI Handoff= Enable Serial Port= Disable
  12. nomadturk

    Winbond/Nuvoton monitor

    Thank you for your help Slice. Now the fans appears in Hwmonitor. But without any rpm value.
  13. nomadturk

    Winbond/Nuvoton monitor

    Hi Slice I added Asus Z170 into W836x.kext / Info.plist. But I don't know i've successfuly edited. It seems Asus info recognized: 12/02/16 14:55:44.000 kernel[0]: W836x: found NCT6793D 12/02/16 14:55:44.000 kernel[0]: W836x: mother vendor=ASUSTeK COMPUTER INC. product=Z170-DELUXE However the HWmonitor doesn't show Fan info: If you want to control the info.plist: https://db.tt/WdStf771
  14. nomadturk

    Winbond/Nuvoton monitor

    Now Hwmonitor can read CPU Heatsink, motherboard temp and Voltages. But not the fan: And the System log result: 01/02/16 16:41:49.196 com.apple.kextd[45]: kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext "/Library/Extensions/W836x.kext" 01/02/16 16:41:49.306 com.apple.kextd[45]: kext signature failure override allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext "/Library/Extensions/W836x.kext" 01/02/16 16:41:49.379 com.apple.kextd[45]: kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext "/Library/Extensions/W836x.kext" 01/02/16 16:41:49.430 com.apple.kextd[45]: kext signature failure override allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext "/Library/Extensions/W836x.kext" 01/02/16 16:41:49.000 kernel[0]: W836x: found NCT6793D 01/02/16 16:41:49.000 kernel[0]: W836x: mother vendor=ASUSTeK COMPUTER INC. product=Z170-DELUXE 01/02/16 16:41:49.000 kernel[0]: W836x: [Warning] set default configuration
×