Downloads

InsanelyRepairPermission is a command line that is able to repair kexts permissions in the current Volume or other Volumes as you wish.   It repair kexts permission for:   /Extra/KPKexts (since v1.1) /Extra/Extensions /System/Library/Extensions /Library/Extensions     Usage (new version 1.1) ------------------------------------------------------------------------- to verify: sudo InsanelyRepairPermission -v /Volumes/Your Volume (or simply /)   to repair: sudo InsanelyRepairPermission -r /Volumes/Your Volume   to repair and touch (will cause the kernelcache/prelinked to be rebuilt): sudo InsanelyRepairPermission -rt /Volumes/Your Volume ------------------------------------------------------------------------- Usage (version 1.0)     repairs only files that have incorrect permissions, if they are ok tells you that there are no files to be repaired.   NOTE: In El Capitan you should need to boot with SIP disabled or a permissive CSR config   Codes comes from Zeus.app:   // Created by Micky1979 on 04/01/14. // Copyright © 2014-2015 InsanelyMac. All rights reserved.

Mac OS X Unlocker for VMware ============================   1. Introduction ---------------   The package is a combination of the Unlocker code written by Zenith432 plus some fixes and scripts written by myself that wrap the actual unlocker code.   It has been tested against:   * Workstation 8/9/10 on Windows and Linux (32 & 64-bit versions) * Player 4/5/6 on Windows and Linux (32 & 64-bit versions) * Fusion 4/5/6 on Snow Leopard, Lion, Mountain Lion and Mavericks * ESXi 5.0/5.1/5.5   The patch code carries out the following modifications dependent on the product being patched:   * Fix vmware-vmx and derivatives to allow Mac OS X to boot * Fix vmwarebase .dll or .so to allow Apple to be selected during creation * Copy darwin.iso if needed to VMware folder   Note that not all products recognise the darwin.iso via install tools menu item. You will have to manually mount the darwin.iso for example on Workstation.   Also Player is missing vmware-vmx-debug and vmware-vmx-stats files and so an error is shown during patching as the files are not found. This can be safely ignored.   OS X guests on ESXi patched hosts cannot be controlled from vCenter, only from the ESXi host itself. This means power operations have to be run directly on the server.   The vmwarebase code does not need to be patched on ESXi or OS X so you will see a message on those systems telling you that it will not be patched.   In all cases make sure VMware is not running, and any background guests have been shutdown.   2. Windows ---------- On Windows you will need to either run cmd.exe as Administrator or using Explorer right click on the command file and select "Run as administrator".   install.cmd - patches VMware and copies darwin.iso tools image to VMware uninstall.cmd - restores VMware and removes darwin.iso tools image from VMware   3. Linux --------- On Linux you will need to be either root or use sudo to run the scripts.   You may need to ensure the contents of the linux folder have execute permissions by running chmod +x against the 4 files.   install.sh - patches VMware and copies darwin.iso tools image to VMware uninstall.sh - restores VMware and removes darwin.iso tools image from VMware   4. Mac OS X ----------- On Mac OS X you will need to be either root or use sudo to run the scripts. This is really only needed if you want to use client versions of Mac OS X.   You may need to ensure the contents of the osx folder have execute permissions by running chmod +x against the 3 files.   install.sh - patches VMware uninstall.sh - restores VMware   5. ESXi ------- You will need to transfer the zip file to the ESXi host either using vSphere client or SCP.   Once uploaded you will need to either use the ESXi support console or use SSH to run the commands. Use the unzip command to extract the files.   <<< WARNING: use a datastore volume to run the scripts >>>   Please note that you will need to reboot the host for the patches to become active. The patcher is embbedded in a shell script local.sh which is run at boot from /etc/rc.local.d.   You may need to ensure the contents of the esxi folder have execute permissions by running chmod +x against the 3 files.   install.sh - patches VMware uninstall.sh - restores VMware   Note: 1. System should have a persistent scratch partition - should be OK except for stateless and USB boot on drives less than 4GB http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1033696 http://www-01.ibm.com/support/docview.wss?uid=isg3T1013015 http://www.vreference.com/2011/04/28/check-for-esxi-scratch-persistence/ 2. Any changes you have made to local.sh will be lost. If you have made changes to that file, you will need to merge them into the supplied local.sh file. 3. This option runs at boot time to patch the releavant files and it now survives an upgrade or patch to ESXi as local.sh is part of the persisted local state.   6. Zenith432's Unlocker -----------------------   In all cases the unlocker can be run without the scripts but you would need to carry out additional actions which the scripts encapsulate for you especially on ESXi. If you want to run the unlocker directly the parameters are:   Usage: Unlocker [-h] [-u] [target_directory] -h: print help -u: remove the patch target_directory: customize location of vmx executables   On all platforms you must run it with administrator or root privileges. The source code is provided and Zenith432 makes it freely available for modification. I have modified the code and it is available as per Zenith432's original statement.     Thanks to Zenith432 for building the unlocker and Mac Son of Knife for all the testing and support.     History ------- 11/10/11 1.0.0 - First release 07/11/11 1.0.1 - Fixed typo in Windows command files 07/12/11 1.0.2 - Updated patcher and tools for latest release WKS 8.0.1 & FUS 4.1.1 10/05/12 1.1.0 - Changed the patching mechanism for vmwarebase .dll or .so & tested against ESXi 5.0 U1 and Tech Previews. 13/07/13 1.1.1 - Changed ESXi scripts to ensure not deleting root /bin folder - Fixed vmwarebase patching on 32-bit Linux - Some other code clean-up in Unlocker.cpp 18/09/13 1.2.0 - Updated vmwarebase pattern matching for WKS 10.0.0 & FUS 6.0.0 25/03/14 1.3.0 - New method to run patcher on ESXi - Fixes crashes when using vCenter - Tested against ESXi 5.5 - Darwin guest tools from Fusion 6.0.2 - Zip file preserves file attributes for Posix based systems   © 2011-2014 Dave Parsons

Enoch Latest revision of my Chameleon bootloader branch.   Not able to boot AFPS yet....   Please don't upload it on other servers and don't repack it, thank you. - Installer PKG - Binaries format (Manual install) Please don't upload it on other servers and don't repack it, thank you.   Chameleon bootloader credits goes to Chameleon Team http://forum.voodooprojects.org   Changelog: http://forge.voodoop...e/changes/HEAD/   This revision of Enoch contain the upcoming FileNVRAM revision 1.1.5 (RC8) Credits to Micky1979     Language Translation: For on-line Chameleon language package resource edit >> Pootle     Pls translate/complete it.   Link here on InsanelyMac (Italian only): Enoch Bootloader   Enjoy   ErmaC

NVIDIA Web Driver Updater   Application that search for the latest NVIDIA Web Drivers online and download the standard package from NVIDIA.   What is special with this?   Well, the downloaded package is modified on the fly to remove the hardware restriction, so you can immediately install the new drivers on your hackintosh!   El Capitan Beta's and DPs are still supported!   NEW! now NVIDIA® WebDriver Updater.app can patch NVDAStartupWeb.kext or install NVEnabler.kext, customizable as you wish! (since v1.1)   TIP patching NVDAStartupWeb.kext the app show you the OS Build version actually used in the unpatched driver, so if you are in 10.10.1 you have to write the current OS build version ie: 15B42 sobstituing what you see in the field. This is to prevent users mistake clicking the patch button.     Note: The InsanelyMac logo on the app is clickable and will connect you to the support topic here   About vbios: if you need to use a video bios in OSX using this app, you can download and select one for your video card at Tech Power Up site!   // NVIDIA® WebDriver Updater // // Created by Micky1979 and fantomas1 on 09/10/2015. // Copyright © 2015 InsanelyMac. All rights reserved. //