Jump to content

[Guide] macOS Sierra 10.12 - Dell Optiplex 780 (760) (755) (790) (990)


MacPeet
 Share

1,596 posts in this topic

Recommended Posts

IoconsoleUser GIOScreenLock is relate to the Graphics card

 You can ry the config.plist attaching here

 http://www.insanelymac.com/forum/topic/312656-guide-macos-sierra-1012-dell-optiplex-780-760-755-790-990/?p=2531440

You can made some little modifications if this not work

thanks a lot Chris1111 !!!!!

installation start correctly ( i maintain "-v" and "don't reboot on kernel panic") in french language.

Set it in italian , on rebook it return in french.

After last reboot i set under system preference correct language and it remin italian permanently.

 

At this time i have :

 

1) configure clover on hdd such as guide, copying config.plist of my usb key(i need some edit?)

2) configure lan and audio using appropriate kext

3) regarding graphic card i see that is grouped into AMD8000Controller.kext

 

regarding that any guide/trick to follow ?

Thanks for help and for patience 

Link to comment
Share on other sites

thanks a lot Chris1111 !!!!!

installation start correctly ( i maintain "-v" and "don't reboot on kernel panic") in french language.

Set it in italian , on rebook it return in french.

After last reboot i set under system preference correct language and it remin italian permanently.

 

At this time i have :

 

1) configure clover on hdd such as guide, copying config.plist of my usb key(i need some edit?)

2) configure lan and audio using appropriate kext

3) regarding graphic card i see that is grouped into AMD8000Controller.kext

 

regarding that any guide/trick to follow ?

Thanks for help and for patience 

 the Device  ID needs injected into AMD8000Controller.kext and AMDRadeonX4000.kext to enable it

Link to comment
Share on other sites

 the Device  ID needs injected into AMD8000Controller.kext and AMDRadeonX4000.kext to enable it

 

ok .....i'm not so expert but i'll try it.

i understand that this device id must be inserted in config.plist....to obtain device id i must find it under apple report ?

how to add in kext?

any guide or refered post?

 

i see this http://www.insanelymac.com/forum/topic/325702-help-enable-amd-r7-260x-in-sierra-10126-high-sierra/

 

can be useful that kext into 10.12 folder?

 

another thing.

to edit default language i can use clover configurator ?sometimes appears french message!

Link to comment
Share on other sites

thanks for help.

 

for work problems, i start only today by edit config.plist

 

http://ibb.co/nB9khm

 

renaming fr:0 in it:0 --> save --> copy config.plist on usb  restart a fresh install  give me anyway french language again.

I search for other fr value, but nothing.

 

Any suggestions?

 

Now i'm installing again sierra because i want to solve fist Radeon issue and audio issue

Then i fix language

 

Thanks

 

edit:

laguage problem solved ....i redo usb pen with modded config.plist , now install in the proper lamguage

Edited by twingolover
Link to comment
Share on other sites

Hey guys, it's been a while since i gave my sff 755 some love.. I got Sierra 10.12.6 installed on it a couple nights ago and all is well. However when doing some testing with sleep, i noticed that the machine does wake up from sleep fine from overnight, but it reboots after a few seconds.  Anyone, else experienced the same problem who use the same DSDT for hd5450? 

Link to comment
Share on other sites

Hi Chris1111 , after editing both kext at reboot i get black screen.

 

hope i've solved in this way ......can be useful to other people following this trick on another thread

 

  • Adding 0x66581002 in AMD8000 and 4000 kexts
  • In Clover, you have to set:
    • - FakeID / ATI = full ID (here: 0x66581002)
    • - Inject / ATI = true
    • - FixDisplay = true
  • Configure your iGPU as primary graphics device in bios

 

You need to set the 0x665c1002 value as the FakeID and checkmark Deinit

 

http://ibb.co/b9VAiR

 

Only issue if i reboot i have to reinsert again value manually.

There is a way to add  it permanently at startup ?

 

edit: opening config.plist i manage to insert permanently 0x665c1002

but i cannot find which string i have  to modify and which value to insert to  get Deinit selected such as screenshot http://ibb.co/b9VAiR  , if i don't select deinit i get black screen again. If selected it works good.

 

another thing at this time i have resolution of 1280 so i think it's related to monitor because into plist i see 1920x?

 

regarding audio i'm totally screw up .

Intel Cougar Point PCH-High Definition AudioController B2

 

i've not clear which kext i have to use for my machine.

can you help me?

 

Thanks in advance

Edited by twingolover
Link to comment
Share on other sites

  • 2 weeks later...

Hi, I've seen here a few post with ethernet down after waking up. I have the same issue and tried already a few e1000 kext and also a solution with different location in network settings. Network card shows only internal IP address after wake up. I need to sudo en down and up in terminal it works after that. Does anyone can fix that? My hack is on 760. Also tried on different 760 machines - sff and tower. Also on 10.12.3 to 12.6. It's the only issue in this build, all other parameters work fine. 

Link to comment
Share on other sites

Hi Guys, 

   Has anyone tried installing the 10.13.2 update yet. Tried it last night on my Dell 760 and it sent my system into a boot loop. I had updated clover before hand but it did boot to 10.13.1 after the clover update .

Done here

Optiplex 790 

http://www.insanelymac.com/forum/topic/330353-macos-10132-update-is-out/?p=2545220

  • Like 1
Link to comment
Share on other sites

what is the problem?

Please test platform id

0x00010000

0x00020000

0x00030010

0x00030020

0x00040000

0x00050000

 

I want to know result of each id

 

I tested these id on my sandy laptop. Now remains test on sandy desktop.

 

Thanks in advance

 

나의 LG-F800S 의 Tapatalk에서 보냄

Link to comment
Share on other sites

Please test platform id

0x00010000 

0x00020000

0x00030010

0x00030020

0x00040000

0x00050000

 

I want to know result of each id

 

I tested these id on my sandy laptop. Now remains test on sandy desktop.

 

Thanks in advance

 

나의 LG-F800S 의 Tapatalk에서 보냄

0x00010000 ⥢  Good

0x00020000 NO GOOD

0x00030010 ⥢  Good

0x00030020 ⥢  Good

0x00040000 ⥢  Good

0x00050000 NO GOOD

 

 

You have 4 Good  with this result  ;) 

 

sans_t67.png

  • Like 1
Link to comment
Share on other sites

0x00010000 ⥢ Good

0x00020000 NO GOOD

0x00030010 ⥢ Good

0x00030020 ⥢ Good

0x00040000 ⥢ Good

0x00050000 NO GOOD

 

You have 4 Good with this result ;)

sans_t67.png

Thanks. Sorry for testing. I want to test one more.

Apianti report hd3000 of i5 2500k.

Can you test this?

Impotant "Smbios macmini5,1"

 

Fakeid 0x01128086

Platformid 0x00030010

 

Fakeid 0x01168086

Platformid 0x00030010

 

Fakeid 0x01268086

Platformid 0x00030010

 

Thanks in advance for hard testing.

 

EDIT1

Sorry for platform id. I wrote wrong id first.

Edited now

나의 LG-F800S 의 Tapatalk에서 보냄

Link to comment
Share on other sites

Thanks. Sorry for testing. I want to test one more.

Apianti report hd3000 of i5 2500k.

Can you test this?

Impotant "Smbios macmini5,1"

 

Fakeid 0x01128086

Platformid 0x00030010

 

Fakeid 0x01168086

Platformid 0x00030010

 

Fakeid 0x01268086

Platformid 0x00030010

 

Thanks in advance for hard testing.

 

EDIT1

Sorry for platform id. I wrote wrong id first.

Edited now

나의 LG-F800S 의 Tapatalk에서 보냄

 

The first is no GOOD

Second and thirds is good

 

Fakeid 0x01128086

Platformid 0x10000300 NO GOOD

 

Fakeid 0x01168086

Platformid 0x10000300 GOOD

 

Fakeid 0x01268086

Platformid 0x10000300 GOOD

 

kmi1q10.jpg

  • Like 2
Link to comment
Share on other sites

The first is no GOOD

Second and thirds is good

Fakeid 0x01128086

Platformid 0x10000300 NO GOOD

Fakeid 0x01168086

Platformid 0x10000300 GOOD

Fakeid 0x01268086

Platformid 0x10000300 GOOD

 

kmi1q10.jpg

Thank you so much for hard testing.

Have a great day chris :)

 

나의 LG-F800S 의 Tapatalk에서 보냄

  • Like 2
Link to comment
Share on other sites

  • Allan unpinned this topic
 Share

×
×
  • Create New...