aMyn Posted September 28, 2008 Share Posted September 28, 2008 is this distro support p45 and ich10 chipset? Link to comment Share on other sites More sharing options...
Donw35 Posted September 28, 2008 Share Posted September 28, 2008 I like the release and install was smooth on a HP DC7700cmt and 7700sff. The only problem for me was the ethernet card did not work, this PCI card "Intel" card worked in every release I tested out of the box but this one. I had to repleace the IONetworkingFamily.kext on your release with one from another. The iDeneb IONetworkingFamily.kext was 1.7mb and the one from Kalyway is 3.8mb. I simply replaced it and repaied permission and everything is working now. This was my check list for HP DC7700 PC's Audio = AppleAzalianAudio Chipset = ICHx Fixed Fix = AppleSMBIOS - AppleSMBIOS 667 - AppleSMBIOS MacPro Video = NVinject - NVInject 0.2.1 512mb Thanks for the well packaged release. Link to comment Share on other sites More sharing options...
-King- Posted September 28, 2008 Share Posted September 28, 2008 Great Release, however i have never really messed around with it to much, and this could be right but i want to make sure it is using the correct video card, below is what im seeing in system profiler but im using a 8800GTX 768, Thanks ahead of time. I Can Has Model?: Chipset Model: I Can Has Model? Type: Display Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 1024 MB Vendor: NVIDIA (0x10de) Device ID: 0x0191 Revision ID: 0x00a2 ROM Revision: NVinject 0.2.1 Displays: Display Connector: Status: No display connected DELL E177FP: Resolution: 1280 x 1024 @ 75 Hz Depth: 32-bit Color Core Image: Software Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Not Supported Model Name: Mac Model Identifier: MacPro3,1 Processor Name: Intel® Core2 Quad CPU Q6600 @ Processor Speed: 2.4 GHz Total Number Of Cores: 4 L2 Cache (per processor): 4 MB CPU Features: FPU VME DE PSE TSC MSR PAE MCE CX8 APIC SEP MTRR PGE MCA CMOV PAT PSE36 CLFSH DS ACPI MMX FXSR SSE SSE2 SS HTT TM SSE3 MON DSCPL VMX EST TM2 SSSE3 CX16 TPR PDCM Memory: 4 GB Bus Speed: 1.07 GHz Boot ROM Version: BOOT.88Z.EFI.V80.061193037 (American Megatrends Inc.) Serial Number: CK157KMHK5B Link to comment Share on other sites More sharing options...
delios Posted September 28, 2008 Share Posted September 28, 2008 I hane an AMD system with Asus A8R32-MVP motherboard with ATI X1950XTX but the system just loops in the do not transfer..... initial screen after the back-up the same problem I had also with the older 1.5.4 iDeneb and Ireally cant find any solution how can I bypass that how can I chek any error codes in case of debugging the situation. I feell that that mess is cause only iDeneb DVDs . I had no such problems with Kaly... I someone has any idea please help I had made 5 instalations till now but nothing. The procedure of the loop is as follows 1. boot by rd=disk3s5 (I have not find a easy multiboot solution yet except form Kaly) 2. Determines the keyboard by pressing the left and right from shifts 3.ask the country 4 then the keyboard language 5 the stuck point next is tranfer licence etc (we allways choose do not transfer...) then system tries for something and then back to the 1st step.... Any help please it will be apreciated Link to comment Share on other sites More sharing options...
kmikase Posted September 28, 2008 Share Posted September 28, 2008 This release didn't work on my laptop. I'm stuck during the first boot after the installation. In verbose mode it stuck at network something. But it doesn't matter, i got the 1.1 working then upgraded to 10.5.5 Link to comment Share on other sites More sharing options...
sama7896 Posted September 28, 2008 Share Posted September 28, 2008 Hi Layne_ could you please tell me how to fix this error ? The two installers are rather essential (printer driver and office updater) and both relate to the same error. Is there a solution for this ? Thanks ! Except for this error, everything installed fine on my specs. Link to comment Share on other sites More sharing options...
Cris900 Posted September 28, 2008 Share Posted September 28, 2008 sama7896: Try this Fix.... CFMSupport_2.zip Link to comment Share on other sites More sharing options...
exido Posted September 28, 2008 Share Posted September 28, 2008 layne maybe you can add support of nvidia geforce 9600 GT graphics card in the next update would love to start using ideneb. Link to comment Share on other sites More sharing options...
-King- Posted September 28, 2008 Share Posted September 28, 2008 1. boot by rd=disk3s5 (I have not find a easy multiboot solution yet except form Kaly)2. Determines the keyboard by pressing the left and right from shifts 3.ask the country 4 then the keyboard language 5 the stuck point next is tranfer licence etc (we allways choose do not transfer...) then system tries for something and then back to the 1st step.... Any help please it will be apreciated Try unplugging the Ethernet adapter so that you have no network connection. Link to comment Share on other sites More sharing options...
delios Posted September 28, 2008 Share Posted September 28, 2008 Try unplugging the Ethernet adapter so that you have no network connection. When you say unplug you mean by Bios disable the ethernet chip (as these ethernet are motherboard embeded) Link to comment Share on other sites More sharing options...
sama7896 Posted September 28, 2008 Share Posted September 28, 2008 sama7896: Try this Fix.... thanks, that did the job. Dunno what happened in the first place, but thanks Link to comment Share on other sites More sharing options...
delios Posted September 28, 2008 Share Posted September 28, 2008 Sorry but the ....Do not trasfer .... loop continuing even if I dissable any ethernet port I have what king of bug is that whith iDeneb is there any solution about that? Link to comment Share on other sites More sharing options...
-King- Posted September 28, 2008 Share Posted September 28, 2008 Sorry but the ....Do not trasfer .... loop continuing even if I dissable any ethernet port I have what king of bug is that whith iDeneb is there any solution about that? I really just meant unplug it but i guess that works to, The only problem that i can see on my End is with my 8800GTX so far. I had your problem once before on another release and unplugged the cable, it it worked for me Link to comment Share on other sites More sharing options...
Jack Layne Posted September 28, 2008 Author Share Posted September 28, 2008 Hi Layne, For some reason, I had to replace the Extensions.mkext with the one from v1.1 on the DVD. Otherwise, I couldn't boot into the installation screen (still waiting for boot device). After that, everything works fine so far on my Acer Extensa 4420-5239. Nice job. Can you add ALC 268 driver on your next iDeneb? Here is the link: http://forum.insanelymac.com/index.php?showtopic=82025 Thanks. Chun-Nan BTW, for those who have ATI IXP600/IXP700 (SB600/SB700), if your internal PATA devices don't show up after installation, you can give this kext a try. It works on my Acer Extensa but it may conflict with AppleVIAATA. Thanks. you can empty the folder inbox? I do not succeed to send you a pm Link to comment Share on other sites More sharing options...
M16mKies Posted September 28, 2008 Share Posted September 28, 2008 So, anyone made it with IDE DVD Drive? I know, I know that it works on IDE HDD, but does it on IDE DVD + SATA HDD? Link to comment Share on other sites More sharing options...
CyberTron88 Posted September 28, 2008 Share Posted September 28, 2008 hmm...seems to have problem with the X3100. Does not work on my Toshiba Satellite L310. The one that came with iATKOS and JAS 10.5.4 both works.... Should I downgrade the kernel or something? Link to comment Share on other sites More sharing options...
Charon123 Posted September 28, 2008 Share Posted September 28, 2008 Well, no success here , after painless v1.1 (10.5.4) now very painfull v1.3. Seems to get stuck on video (HD3870/ATI), read about more failures with this GPU on this topic. -v shows no particular error s except the obvious Firewire and something about mDNS resolvers. Video is scrambled after finishing boot, however I do have a mouse pointer, but actually can't do anything..... Anyone who has a solution? Link to comment Share on other sites More sharing options...
Jack Layne Posted September 28, 2008 Author Share Posted September 28, 2008 you have selected AtiHdBase + your video cards? Link to comment Share on other sites More sharing options...
Randomiser Posted September 28, 2008 Share Posted September 28, 2008 Will i be able to use this and chameleon, but keep my Vista install intact? Link to comment Share on other sites More sharing options...
Jack Layne Posted September 28, 2008 Author Share Posted September 28, 2008 yes, but then there is the darwin bootloader.. Link to comment Share on other sites More sharing options...
Randomiser Posted September 28, 2008 Share Posted September 28, 2008 OK thanks, is it possible for me to install it on an eSATA drive and use chameleon like that? Link to comment Share on other sites More sharing options...
-King- Posted September 28, 2008 Share Posted September 28, 2008 Layne, have you seen the problem i was having with my Video Card, and if so could you put me on the right track to fix it, I have an 8800 GTX I Can Has Model?: Chipset Model: I Can Has Model? Type: Display Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 1024 MB Vendor: NVIDIA (0x10de) Device ID: 0x0191 Revision ID: 0x00a2 ROM Revision: NVinject 0.2.1 Displays: Display Connector: Status: No display connected DELL E177FP: Resolution: 1280 x 1024 @ 75 Hz Depth: 32-bit Color Core Image: Software Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Not Supported Link to comment Share on other sites More sharing options...
spockers Posted September 28, 2008 Share Posted September 28, 2008 @delios Found the solution in another post, but I don't know where... fortunately I wrote it down: boot with -s for single user enter the two commands it lists at the bottom to mount your drives then enter passwd root make up a password, enter it twice then enter this command: touch /var/db/.AppleSetupDone (note the dot after db/) reboot and you should be able to login with user root and password you typed Link to comment Share on other sites More sharing options...
andrewq2 Posted September 28, 2008 Share Posted September 28, 2008 i will till you how to install works on my pc but... 5 kb/s to get it is painfull. Link to comment Share on other sites More sharing options...
Burbruee Posted September 29, 2008 Share Posted September 29, 2008 Please help. Install was successful, video, audio, lan. All works out of the box. But disk performance is terrible! I've installed on an IDE ATA100 drive and it takes ages to open anything, browsing with safari is painfully slow etc. I think it's an issue with ata drivers, but I don't know. I have an Nforce board. I booted ubuntu and did lspci -nn to find out my vendor id etc. It was 10de:036e, then I checked AppleNForceATA.kext but it was already there under PATA. :S I was running Zephyroth 10.5.2 before and it was very quick and responsive.. But this is just very very slow. PLEASE help, what can I do? Mainboard etc in signature. Also ran XBench.. Disk Test..................Score: 41.92 ..Sequential..............Score: 49.41 ....Uncached Write.....Score: 43.77....Detail: 26.87 MB/sec [4K blocks] ....Uncached Write.....Score: 52.25....Detail: 29.57 MB/sec [256K blocks] ....Uncached Read.....Score: 56.29....Detail: 16.47 MB/sec [4K blocks] ....Uncached Read.....Score: 47.17....Detail: 23.71 MB/sec [256K blocks] ..Random.................Score: 36.39 ....Uncached Write.....Score: 13.43...Detail: 1.42 MB/sec [4K blocks] ....Uncached Write.....Score: 74.19...Detail: 23.75 MB/sec [256K blocks] ....Uncached Read.....Score: 86.20...Detail: 0.61 MB/sec [4K blocks] ....Uncached Read.....Score: 96.27...Detail: 17.86 MB/sec [256K blocks] Link to comment Share on other sites More sharing options...
Recommended Posts