1213 replies to this topic

[IiTz ShAnE]

Maverick, on 04 February 2013 - 09:52 AM, said:

Yes i did
" -v npci=0x200 & 3000 arch=i386 "but same

What chipset do you have? Are you booting from USB?

[Maverick]

i have Nvidia chipset

Yes i am booting from USB.................!
Motherboard : ASUS M2M68 AM SE 2
PRPCESSOR: AMD ATHLON X64 LE 1640 2.71 GHZ

http://support.asus....68-AM SE2&os=25

http://www.amd.com/u...comparison.aspx

[spakk]

Maverick, on 04 February 2013 - 09:52 AM, said:

Yes i did
" -v npci=0x200 & 3000 arch=i386 "but same

Hi Maverick,  check these instructions and adapt them to your BIOS.
http://www.osx86.net...y-10-6-8-a.html
Than use Still_waiting_for_root_device.zip from my upload-folder, possibly it may help
Still_waiting_for_root_device.zip

[Maverick]

spakk, on 05 February 2013 - 05:13 AM, said:

Hi Maverick,  check these instructions and adapt them to your BIOS.
http://www.osx86.net...y-10-6-8-a.html
Than use Still_waiting_for_root_device.zip from my upload-folder, possibly it may help
Still_waiting_for_root_device.zip

Thanks for reply................!
Which kernel i use for Lion and for mountain lion ?
because i did successfully install snow  leopard on my desktop with no errors accept " boot:0/boot:0 done"
but i want Lion or Mountain Lion
see my previous post here
http://www.insanelym...d/page__st__180

[Maverick]

Maverick, on 05 February 2013 - 06:23 AM, said:

Thanks for reply................!
Which kernel i use for Lion and for mountain lion ?
because i did successfully install snow  leopard on my desktop with no errors accept " boot:0/boot:0 done"
but i want Lion or Mountain Lion
see my previous post here
http://www.insanelym...d/page__st__180

hey spakk
i got stuck here after copy your those Still_waiting_for_root_device.zip


https://www.dropbox....5u/05022013.jpg

[TheMentalist]

On my 960T i use -nossse3bit and everything works perfect except the damn GT210 , I have tried everything and also a lot of help from iFire but it just refuses to give QE/CI and with GE=Yes screen goes blank on login.

[theconnactic]

Yeah, TheMentalist.

Put Mountain Lion on hold for a while, if you cannot bear the lack of QE/CI: none of the current AMD kernels for ML (or 10.7.5, if you ask) supports nVidia graphics because of a bug. No injection or any known workaround will help. If you can live without QE/CI, simply remove the GeForceGA.plugin and the GeForceGLDriver.bundle from S/L/E to get full resolution. Since there's no idea of the causes of that bug, don't expect it to be squashed soon.

If you want to try Lion, there are both the kernel of IiTz Shane (10.7.4, 64-bit) and latest Bronzovka (10.7.4, 32-bit -force64) which are reported to work well.

Good luck.

[Bitcore]

i'm having full QE/CI on my HD6770 but even with that your basicly nowhere.
The distortion is to heavy to actually use it for me

[shhbz]

I created a bootable usb using uni beast and placed andy amd_kernel v4 and tried to boot from usb all went fine but in the end it showed an error cant install mountain lion to the drive though it was properly formatted using disk utility. after restarting and booting with usb i found that my mountain line drive was showing but when i tried to boot it did not worked even tried all boot flags even tried to put amd_kernel flag to make it wrk but it said not found and some white text than it restarted everytime.

creating bootable drive from myhack is not loading to installation screen  can any 1 share their views how to go ahead i am willing to create a bootable usb using myhack but its not working i followed this tutorial for my hack currenly using 10.6 and i have .dmg on desktop  i tried mounting the dmg and placing  osxmountainlion installer to application too.

my config x4 965| m4a88t-m|8gb ram| ati radeon hd 4250 (no external graphic card) and what would be the bios setting for x4 965 mb as many user have been using it so they must have configured it right for now i have ahci -enabled, c1e support-disabled,power mode-s3,cool n quiet- disabled,quick boot - disabled


Update 12/2/2013  I created the usb installer with my hack and run my fix to the usb it boots to the screen  I even copied andy latest kernel to the root of the usb and when i try to install it just hangs on apple screen with a small icon rotating but it loads nothing i tried flags -v andy_kernel GraphicsEnabler=Yes/NO (both) but it does not proceed with the installation

cmon some1 reply it seems to be a dead thread with no help from any1

[instant idiot]

When using -v, please take a picture of the screen so I can see where it hangs.

[shhbz]

instant idiot, on 12 February 2013 - 06:35 AM, said:

When using -v, please take a picture of the screen so I can see where it hangs.

here is the screen where it hangs using -v while using flags amd_kernel GraphicsEnabler=Yes/No hangs on white screen with apple logo




youtube link

[Maverick]

shhbz, on 12 February 2013 - 07:56 AM, said:

here is the screen where it hangs using -v while using flags amd_kernel GraphicsEnabler=Yes/No hangs on white screen with apple logo




youtube link

i got same kernel issue which is
of _Kernel_.couldn't find
this error i got
then still waiting for root device.........

[claure]

I have this error at boot with usb  when installing mountain lion with amd kernel:

USBF: 1.378 AppleUSBEHCI checksleepcapability controller will be unloaded across sleep.

and with flag  

USBBusFix=Yes i have this error:

[ham4ever]

hi all
does ML AMD kernel works for laptop ?
how to solve white screen during installation ?
and what is latest working kernel for Mountain Lion 10.8.2 ? do i need any kexts for ML10.8
thanks

shhbz, on 12 February 2013 - 07:56 AM, said:

here is the screen where it hangs using -v while using flags amd_kernel GraphicsEnabler=Yes/No hangs on white screen with apple logo




youtube link

i had same problem , i think i deleted ATI kexts ,, give it a try if u have ati card ,

[whoareyou]

OK im having an issue, no matter what i do it will not detect my HDD, i have tried lots of kexts added 2 different device id's (windows says 1002 4390, linux says 4394) but no matter what i do it doesnt work... any suggestions?

Im starting with flags

amd_kernel GraphicsEnabler=no "Graphics Mode"="1366x768x32"

it wont detect any drives other than usb...

[pipko]

What flag for asus m5a97 and fx 8320 whyt 10.8.x Boot Cd for AMD
cpu-z:
http://dl.dropbox.co...8553327/cpu.jpg
tnx

[Maverick]

spakk, on 05 February 2013 - 05:13 AM, said:

Hi Maverick,  check these instructions and adapt them to your BIOS.
http://www.osx86.net...y-10-6-8-a.html
Than use Still_waiting_for_root_device.zip from my upload-folder, possibly it may help
Still_waiting_for_root_device.zip

Hey spakk...!

i did try once more time when use USBLegacyOff=Yes this flag i got stuck in
AppleNforceAta found0 Unit but capsLock is still work but won't get further

i use this flags
-legacy -v GraphicsEnabler=Yes USBLegacyOff=Yes -x -f
-legacy UseKernelCache=No USBLegacyOff=Yes -v -f -x
i am using brozowaka amd kernel v4 and v5

[pipko]

I do not understand why I do not see HDD in diskmenager when install is up. In bios is set all to AHCI on every port/controller. hdd is in 1st and dvd in 2nd SATA port
Installer Log

[theconnactic]

Hi, pipko!

You don't see any disks because they're partitioned as Master Boot Record, and the installer can only see GPT partitions. You have to modify your installer to do it. Check here:      [Guide] The all-in-one guide to Vanilla OS X Mountain Lion + Chameleon + DSDT for beginners.    

Best regards!

ham4ever, on 16 February 2013 - 06:24 PM, said:

hi all
does ML AMD kernel works for laptop ?
how to solve white screen during installation ?
and what is latest working kernel for Mountain Lion 10.8.2 ? do i need any kexts for ML10.8
thanks

Ham4ever, it works with laptops, albeit it's always harder to do it. The latest kernel in in the main Mountain LionAMD topic, in the very first post. Don't know which special kexts you'll need, if any. Good luck!

[pipko]

theconnactic, on 22 February 2013 - 05:48 PM, said:

Hi, pipko!

You don't see any disks because they're partitioned as Master Boot Record, and the installer can only see GPT partitions. You have to modify your installer to do it. Check here: [Guide] The all-in-one guide to Vanilla OS X Mountain Lion + Chameleon + DSDT for beginners.

Best regards!

tnx bro but i use niresh 10.7.3 v2 and go to install  ---"Kernel Cahe"=\amd arch=i386 maxmem=4096 Graphics Enabler=NO --- but then in diskutility i dont see my HDD
that's the problem
translate.google