Jump to content
Deltac0

HELP TOPIC - for help in OS X Yosemite (10.10) and below

2,848 posts in this topic

Recommended Posts

I'll just clarify that this section isn't for "omg how to get mountain lion / lion / snow leopard running on AMD".

The section is named "AMD Development". This basicly means that this section is dedicated to developing, not asking help.

I know I've done this even by myself, but now it's kinda out of control, everyone asking about installing ML on AMD etc.

The 3 threads (SL / L /ML) should be dedicated to development of kernels and other related stuff and reports of the developments, not asking "how to get it running i get error".

 

If you need help with AMD on SL for example, you should post on the installation help or if you followed a tutorial, ask the tutorial thread.

However, I do not suggest asking with PM, because then other people can't get the same information as easily, and it's not funny to see inbox full every minute. :)

 

Also, if you need help with the test kernels for SL / L / ML, you can post on this thread, I'm sure there are people ready to help you with your errors.

Let's just keep the "development" threads clean of the "spam" / stupid questions (even if there isn't any).

 

For real-time help, download an IRC client and join us:

chat.osx86.hu #LegacyKernel

 

And when you get your build running, please post here!

 

Thanks! :)

Share this post


Link to post
Share on other sites
Advertisement

Should we be strictly mandatory ahci enabled?

Yes!

 

with the variation of mac_carol with Andys amd_kernel with vanilla corocrypt ,

I'm stuck here:

macx_swapon Succes

the partitions, such as ... jnl: disk0s2 etc. listed all partitions

then comes the annoying USBF: AppleUSBEHCI ..... it gets on my nerves, even though I made a dsdt and've fixed ehci

 

please help!

 

I try to make a new dsdt file

Edited by spakk

Share this post


Link to post
Share on other sites

Ok, Now Im in RAID Mode, But I Still Getting "Still Waiting For Root Device"...Any Sugges?

vmNAz.jpg

 

Was able to install successfully with nForce RAID off and boot with -x using AnV's latest amd_kernel and following kext... http://www.osx86.net/view/2602-applenforceata_snow_leo-lion_32-64bit.html

Still can't boot without -x, using nVidia 8400 graphics.

 

PhenomIIX4-945 / Gigabyte GA-M57SLI-S4 - BIOS F15e

Share this post


Link to post
Share on other sites

Was able to install successfully with nForce RAID off and boot with -x using AnV's latest amd_kernel and following kext... http://www.osx86.net...n_32-64bit.html

Still can't boot without -x, using nVidia 8400 graphics.

 

PhenomIIX4-945 / Gigabyte GA-M57SLI-S4 - BIOS F15e

 

look here and try Still_waiting_for_root_device.zip

#12

 

I stuck here

kernel extensions in backtrace:

com.apple.AppleFSCCompression

Share this post


Link to post
Share on other sites

You have set AHCI In Your Bios?

Thanks for asking!

 

Unfortunately, AHCI has been enabled since I got this PC, so that is definitely not the problem. I just downloaded the AppleNforceATA kext found at post #1477, will test and report back!

 

Update: I was able to get into the installer with mach_sse42_only and the AppleNforceATA, but it still crashed. What am I doing wrong here? :help:

Share this post


Link to post
Share on other sites

Slowly Is how many time? 5 minutes?

 

Around 1 minute and 30 seconds, while with Sinetek's kernel it's under a minute.

Share this post


Link to post
Share on other sites

still stuck at this line macx_swapon success....

 

Are you sure it's stuck? Wait for like 20 minutes and then take another look, my macx_swapon took 5 minutes with some of the kernels.

Share this post


Link to post
Share on other sites

emm yes i must admit i havent waited 20 minutes but is it normal to wait that long? :| i will try that though..

Share this post


Link to post
Share on other sites

emm yes i must admit i havent waited 20 minutes but is it normal to wait that long? :| i will try that though..

On my computer 2 mins max but it is an Intel Core 2 Quad

Share this post


Link to post
Share on other sites

On my computer 2 mins max but it is an Intel Core 2 Quad

 

well mine is amd phenom 9600, 4 cores, not that awful ;D other genius kernel test2 was booting for me normally, about 1-2 minutes, so its something to do with this kernel, but i have no idea what is wrong..

Share this post


Link to post
Share on other sites

I will test without AppleIntelCPUPowerManagement.kext, then watch what happens.

Share this post


Link to post
Share on other sites

I will test without AppleIntelCPUPowerManagement.kext, then watch what happens.

 

Did you try the IOPCIFamily.kext i added to the post? That one should work!

Share this post


Link to post
Share on other sites

Did you try the IOPCIFamily.kext i added to the post? That one should work!

 

with 2965-IOPCIFamily.zip it hangs on ACPI: System Status....... Iwill do everything to undo and try to divers boot flags.

Share this post


Link to post
Share on other sites

-v -x npci=0x2000 PCIRootUID=0 -nosse42bit

 

The above boot flags take me successfully to desktop in safe mode. Nvidia drivers are installed, GTX 480 is recognized but dont think graphic acceleration is achieved. Flash from youtube doesnt work and it is accompanied by flickering or repetitive loading of imagery with an increase in CPU and RAM usage across all 4 cores (AMD 960T with 8GB RAM).

 

Hope these boot flags help out.

Share this post


Link to post
Share on other sites

Hi all.

I have a FX-8120 on a ASUS M5A97 EVO motherboard with 16GB of ram & a nVidia GTX 465. So far I have only been only able to use Sinetek's original ML kernel. Everything from Sinetek since & AnV's reboots instantly reboots after processing kexts. Currently have AnV's corecrypto.kext installed and the 10.8.0 AppleACPIPlatform.kext IOACPIFamily.kext IOPCIFamily.kext System.kext kexts. I have tried "-f -v npci=x3000" with and with -x. I don't have the nVidia driver in /S/L/E.

Any Ideas? Thanks

 

 

Output of lspci

00:00.0 Host bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (external gfx0 port  (rev 02)
00:02.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (PCI express gpp port 
00:04.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (PCI express gpp port D)
00:05.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (PCI express gpp port E)
00:06.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (PCI express gpp port F)
00:07.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (PCI express gpp port G)
00:09.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (PCI express gpp port H)
00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] (rev 40)
00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 42)
00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) (rev 40)
00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge (rev 40)
00:14.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:15.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0)
00:16.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:16.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 15h Processor Function 0
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 15h Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 15h Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 15h Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 15h Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices [AMD] Family 15h Processor Function 5
01:00.0 VGA compatible controller: NVIDIA Corporation Device 06c4 (rev a3)
01:00.1 Audio device: NVIDIA Corporation GF100 High Definition Audio Controller (rev a1)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
03:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller
04:00.0 SATA controller: JMicron Technology Corp. JMB362 SATA Controller (rev 10)
05:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller
06:00.0 Network controller: Atheros Communications Inc. AR9300 Wireless LAN adaptor (rev 01)
07:05.0 Multimedia controller: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder (rev f0)
07:07.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0)
08:00.0 Multimedia controller: Philips Semiconductors SAA7164 (rev 81)

Share this post


Link to post
Share on other sites

Hello!

 

I'm a little scared because of the first post, but i'm send here by another member so it should be fine.

First of all, im really happy finding this forum!

When i started looking at installing osx on my amd build, i found a tutorial on a french forum by Gils .

As I'm Dutch, i'm not really good in speaking French, but i can speak a little English (:

So lets start,

 

I have made the following build one year ago:

Processor : AMD FX-8120

Chipset : 970 Series

Memory: 8GB G.SKILL DDR3 1600Mhz (2x4GB)

Graphics card : HD6770

Mother Board : Asrock 970 extreme 4

 

And that's it basicly.

So once I'd heard about the sinetek kernel and mountain lion , i directly wanted to "help" the developpers by testing kernels for them and stuff.

I'm just having some problems while trying to install ML, actually the whole sinetek kernel doesn't work for me!

I'll reboot my pc know so I can check my bios settings, and then post them here.

Lets hope some of you can help me to install ML ;)

 

Once again ; I would really like to test things! As I'm 15 years old i have loads of time :P

 

Sirencely,

Bitcore!

Share this post


Link to post
Share on other sites

Hello, and welcome on board! :)

 

What does exactly happen when you try Sinetek's kernel? By the way there are a lot of his kernels around here: which one exactly did you use?

 

Best regards!

Hi,

 

I've used a kernel described as: Sinetek Darwin 11.4.2

When booting with it, the following happens : First it reads all of the files, and then the screen will turn black and my system reboots.

Do you have any suggestions for other kernels or another version?

 

Bitcore

Share this post


Link to post
Share on other sites

Try this kernel here, SinetekBronzovkAnVoodoo_rc4

Didn't work, however i'm seeing a cyan colored screen for like 0,0001 second before the reboot.

I think I'm not using the necessary flags. I'm just booting like: amd_kernel -v . Aren't there other flags recquired?

 

Bitcore

 

Or could it be the fact i'm not using corecrypto?

Share this post


Link to post
Share on other sites

Anyone got AppleNforceAta? I get "still waiting for root device" In RAID Mode, & on IDE Native Mode The Same = Still Waiting For Root Device.

 

the problem: still waiting for root device, can have different causes.

try using this method as described by nanjuah Message #17 . or just download under my uploads Still_waiting_for_root_device.zip.

Possibly it may be the cause that you does not have set the boot sequence fields in the BIOS .

First position CD-ROM/DVD, Second position HDD HFS+,Third Position NTFS HDD, or disable the firewire

Edited by spakk

Share this post


Link to post
Share on other sites

You also need to use arch=x86_64.

 

These are my bootflags.

npci=0x2000 arch=x86_64 -v

Tried it, but no succes.. still exactly the same problem.

Reading the files and then a reboot.

 

EDIT: Tried with CoreCrypto and succesfully launched the setup!

Only problem is that it says : "Cannot instal to this drive , can't update this version of osx" It's a harddisk with 10.6.3

After formatting that disk it is saying the same ;s I've used this tool to create my usb ML installation : http://www.osx86.net/downloads.php?do=file&id=3506 (only replaced the kernel with SinetekBronzovkAnVoodoo_rc4 and added the corecrypto kext )

 

Have to find another way

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Coddyx
      Hi,
       
      I followed the AMD OSX Vanilla Guide and managed to successfully build my first hackingtosh.
      Everything works great EXCEPT for my MSI - Radeon RX 580 8 GB GAMING X.
      I ran some benchmarks (and tried World of Warcraft) and I am getting ~50% of the performance I am usually getting in Windows 10.
      Unigine Heaven reports ~950 vs 1750 in Windows and World of Warcraft runs @ 30 fps lowest settings vs 60 fps ultra settings in Windows.
       
      Here are the kexts I am using:
      AppleALC Lilu NullCPUPowerManagement RealtekRTL811 VirtualSMC WhateverGreen  
      I should mention that this is an AMD hackingtosh running on Ryzen 5 1600 3.2 GHz 6-Core Processor.
       
      I read and I completely understand that I should not expect 100% performance. But I believe a 50% drop is out of the ordinary.
       
      If anyone has ideas on what I could try to up the performance it would be greatly appreciated.
       
      Thank you!
       
       
    • By vlgngrbrdmn
      Hey all,
       
      This is my first time posting to this forum.
       
      Here is my problem: My main issue is random freezing of my display (i.e. cannot move my mouse) and nothing being displayed after my monitors go to sleep (i.e. lock my screen, wait a few minutes, try to move mouse/type on keyboard. My displays wake up but display "no signal"). I have to reboot in order to use my Hackintosh again.

      Another issue that I am experiencing is that, every time I reboot my system and login initially, my right and left vertical displays do not display correctly until I turn one of them off and back on again. It is kind of hard to describe what is wrong, but basically the dimensions of the display and the orientation (horizontal vs. vertical) is wrong, and my mouse does not display in the correct place on the screen.

      Either way, after some research it looks like this all may be due to my Framebuffer being incorrect. However, I am having a hard time trying to determine whether that is the case and, if so, how to fix it.

      I did manually try to add a Framebuffer ("Kamarang") into my config.plist below, however that did not seem to make a difference.

      Any help with this would be much appreciated! Also, please let me know if I should upload anymore information.

      Currently, My setup consists of 1 Dell U3415w and 2 Dell 2415 monitors in an "H" configuration (both 2415s setup vertically on either side of the U3415W).

      This is all being powered by a SAPPHIRE Radeon RX Vega 64 (https://www.newegg.com/Product/Product.aspx?Item=N82E16814202326) with each monitor plugged via a DisplayPort.

      I am currently running the latest version of macOS Mojave, 10.14.4.

      I am also using the latest version of the Clover boot loader (4920) with the following kexts located in kexts\Other:
      AppleALC.kext AtherosE2200Ethernet.kext Lilu.kext USBInjectAll.kext VegaTab_64.kext VirtualSMC.kext WhateverGreen.kext My config.plist file contains the following:
      ?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>#DisableDrivers</key> <array> <string>CsmVideoDxe</string> <string>VBoxExt4</string> </array> <key>ACPI</key> <dict> <key>DSDT</key> <dict> <key>Fixes</key> <dict> <key>FixHPET</key> <true/> <key>FixIPIC</key> <true/> <key>FixRTC</key> <true/> <key>FixShutdown</key> <true/> <key>FixTMR</key> <true/> </dict> <key>Patches</key> <array> <dict> <key>Comment</key> <string>change XHCI to XHC</string> <key>Disabled</key> <false/> <key>Find</key> <data> WEhDSQ== </data> <key>Replace</key> <data> WEhDXw== </data> </dict> <dict> <key>Comment</key> <string>change XHC1 to XHC</string> <key>Disabled</key> <false/> <key>Find</key> <data> WEhDMQ== </data> <key>Replace</key> <data> WEhDXw== </data> </dict> <dict> <key>Comment</key> <string>change SAT0 to SATA</string> <key>Disabled</key> <false/> <key>Find</key> <data> U0FUMA== </data> <key>Replace</key> <data> U0FUQQ== </data> </dict> </array> </dict> <key>DropTables</key> <array> <dict> <key>Signature</key> <string>DMAR</string> </dict> <dict> <key>Signature</key> <string>MATS</string> </dict> </array> <key>FixHeaders</key> <true/> <key>SSDT</key> <dict> <key>Generate</key> <dict> <key>PluginType</key> <true/> </dict> </dict> </dict> <key>Boot</key> <dict> <key>Arguments</key> <string>keepsyms=1 dart=0 debug=0x100 shikigva=40</string> <key>DefaultVolume</key> <string>LastBootedVolume</string> <key>Timeout</key> <integer>5</integer> </dict> <key>BootGraphics</key> <dict> <key>#DefaultBackgroundColor</key> <string>0xF0F0F0</string> <key>EFILoginHiDPI</key> <integer>1</integer> <key>UIScale</key> <integer>1</integer> </dict> <key>CPU</key> <dict> <key>#BusSpeedkHz</key> <integer>133330</integer> <key>#FrequencyMHz</key> <integer>3140</integer> <key>#HWPEnable</key> <true/> <key>#HWPValue</key> <string>0x30002a01</string> <key>#QPI</key> <integer>4800</integer> <key>#SavingMode</key> <integer>7</integer> <key>#TDP</key> <integer>95</integer> <key>#TurboDisable</key> <true/> <key>#Type</key> <string>0x0201</string> <key>#UseARTFrequency</key> <true/> </dict> <key>Devices</key> <dict> <key>Audio</key> <dict> <key>Inject</key> <integer>1</integer> <key>ResetHDA</key> <true/> </dict> <key>Properties</key> <dict> <key>PciRoot(0x0)/Pci(0x2,0x0)</key> <dict> <key>AAPL,ig-platform-id</key> <data> AAASGQ== </data> <key>framebuffer-patch-enable</key> <data> AQAAAA== </data> <key>framebuffer-stolenmem</key> <data> AAAwAQ== </data> </dict> </dict> <key>USB</key> <dict> <key>FixOwnership</key> <true/> </dict> </dict> <key>GUI</key> <dict> <key>Hide</key> <array> <string>PREBOOT</string> </array> <key>Scan</key> <dict> <key>Entries</key> <true/> <key>Linux</key> <true/> <key>Tool</key> <true/> </dict> </dict> <key>Graphics</key> <dict> <key>FBName</key> <string>Kamarang</string> <key>Inject</key> <dict> <key>ATI</key> <false/> <key>Intel</key> <false/> <key>NVidia</key> <false/> </dict> <key>RadeonDeInit</key> <true/> </dict> <key>KernelAndKextPatches</key> <dict> <key>KernelPm</key> <true/> <key>KextsToPatch</key> <array> <dict> <key>Comment</key> <string>Port limit increase</string> <key>Disabled</key> <false/> <key>Find</key> <data> g710////EA== </data> <key>InfoPlistPatch</key> <false/> <key>MatchOS</key> <string>10.12.x</string> <key>Name</key> <string>com.apple.driver.usb.AppleUSBXHCI</string> <key>Replace</key> <data> g710////Gw== </data> </dict> <dict> <key>Comment</key> <string>Port limit increase (RehabMan)</string> <key>Disabled</key> <false/> <key>Find</key> <data> g32IDw+DpwQAAA== </data> <key>InfoPlistPatch</key> <false/> <key>MatchOS</key> <string>10.13.x</string> <key>Name</key> <string>com.apple.driver.usb.AppleUSBXHCI</string> <key>Replace</key> <data> g32ID5CQkJCQkA== </data> </dict> <dict> <key>Comment</key> <string>Port limit increase (PMHeart)</string> <key>Disabled</key> <true/> <key>Find</key> <data> g/sPD4MDBQAA </data> <key>InfoPlistPatch</key> <false/> <key>MatchOS</key> <string>10.14.0</string> <key>Name</key> <string>com.apple.driver.usb.AppleUSBXHCI</string> <key>Replace</key> <data> g/sPkJCQkJCQ </data> </dict> <dict> <key>Comment</key> <string>Port limit increase (Ricky)</string> <key>Disabled</key> <false/> <key>Find</key> <data> g/sPD4OPBAAA </data> <key>InfoPlistPatch</key> <false/> <key>MatchOS</key> <string>10.14.x</string> <key>Name</key> <string>com.apple.driver.usb.AppleUSBXHCI</string> <key>Replace</key> <data> g/sPkJCQkJCQ </data> </dict> <dict> <key>Comment</key> <string>External Icons Patch</string> <key>Disabled</key> <false/> <key>Find</key> <data> RXh0ZXJuYWw= </data> <key>InfoPlistPatch</key> <false/> <key>Name</key> <string>AppleAHCIPort</string> <key>Replace</key> <data> SW50ZXJuYWw= </data> </dict> </array> </dict> <key>RtVariables</key> <dict> <key>BooterConfig</key> <string>0x28</string> <key>CsrActiveConfig</key> <string>0x67</string> <key>MLB</key> <string>C02601270QXGPF7FB</string> <key>ROM</key> <string>UseMacAddr0</string> </dict> <key>SMBIOS</key> <dict> <key>BoardSerialNumber</key> <string>C02601270QXGPF7FB</string> <key>ProductName</key> <string>iMac17,1</string> <key>SerialNumber</key> <string>C02R2HZDGG7L</string> <key>SmUUID</key> <string>91E0E343-A938-4117-BBC7-234EA3ED265E</string> </dict> <key>SystemParameters</key> <dict> <key>InjectKexts</key> <string>Yes</string> <key>InjectSystemID</key> <true/> </dict> </dict> </plist> Also, for what it is worth, sleep is disabled on my system:

      Again, thank you all for taking time out of your day to help a fellow hackintosher out!
    • By THE M
      Hi,Everyone
      i've struggled to install Mac High Sierra from three days ago  with an strange error then my pc restart ......
      My PC specifications is
      Cpu amd Athlon 620 II x2
      Ram 8g
      Graphic Ati 5670 DDR3 2g
      Motharboard msi 970 amd

    • By golden eagl
      Hi everyone,
      I'm struggling with installing driver of my graphic adapter on high Sierra but till now I failed to find a solution to my issue ....
      My PC configuration is .
      CPU : AMD A8-5500 APU with integrated Radeon 7560 
      RAM : 8G    
      I tried to download a tool from tonymax website and after I used it I unable to login to my Mac high Sierra so I installed high Sierra again .....
       
      Any help with this issue
      Thanks in advance 
       
    • By thiagomenini
      Hello everybody,
      I'm from Brazil, if someone wants to write in portuguese, i will understand too. But english is fine.
       
      Days ago I installed the High Sierra, using the image (HighSierraAMD V2 UEFI.dmg). I have an FX8320e, the Asus M5A78L-M / USB3 mobo, GTX 750 and 12GB of RAM.
       
      Well, I build Hackintosh to run audio programs. Everything is working except the USB audio card on the card. But I read that some gyus updates to 10.13.4 or higher and it work.
      But I have some problem with startup and shutdown. I had installed the Clover in different ways, but it did not appear at startup. If I do not use the pen drive to boot, I do not have access to the system.
       
      I've tried different solutions. I formatted the EFI partition using the Terminal and reinstalled the Clover, but it also did not work.
       
      The other problem is the shutdown. The system goes off, but the fans and the mobo remains on. I need to manually press the on/off button to turn off the computer. I had used the Clover Configurations App to set the flag (shutdonw fix) but it not work too. I think this might be related to the boot problem.
       
      Thanks for any help!
×