zozourban Posted March 18, 2013 Share Posted March 18, 2013 Please update your signature: we need your complete specs to provide any help. Boot with -v and post a picture of where it freezes. Look my first post i have a picture with the problem i update my signature tonight Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/12/#findComment-1898260 Share on other sites More sharing options...
iskorini Posted March 18, 2013 Share Posted March 18, 2013 Hi, sorry for my bad english but i'm Italian. I would like to install OSX 10.8.** on my PC and i've chosen Niresh's OSX 10.8.2 but, when i start the DVD for installation, after 30-40 second it reboot. This is a video: And this is a frame before the reboot: https://dl.dropbox.c...Immagine001.jpg My HW: -AMD APU 3870k (This CPU sucks, i know xD) -Asrock A75 Pro4 -MSI R7870 Twin Frozr 2gb -8Gb di ram (2x4GB) @1600mhz cl8 I've tested the flag: - "Kernel Cache"=\amd -v arch=x86_64 - -amd arch=x86_64 npci=0x2000 GraphicsEnabler = no -v After I've tested the Niresh's 10.7.3 v2 and with the flag "Kernel Cache"=\amd arch=i386 -v and this is the result https://dl.dropbox.c...17 15.04.55.jpg (last written are mine xD) Adding the flag -legacy the result is a Kernel Panic https://dl.dropbox.c...17 15.40.50.jpg I've tried to disable USB but it's unnecessary. Please help me Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/12/#findComment-1898262 Share on other sites More sharing options...
theconnactic Posted March 18, 2013 Share Posted March 18, 2013 Please help me I would like to, but as far as Niresh goes, i know as much as the next guy. Did you try to ask Niresh himself? Can;t you start over with a method like this one - http://www.insanelymac.com/forum/topic/280756-guide-the-all-in-one-guide-to-vanilla-os-x-mountain-lion-chameleon-dsdt-for-beginners/ - you just need to put the amd_kernel of the first post of the topic "Mountain Lion Kernel Testing" in the place of the stock mach_kernel, it should work. All the best! Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/12/#findComment-1898269 Share on other sites More sharing options...
iskorini Posted March 18, 2013 Share Posted March 18, 2013 I would like to, but as far as Niresh goes, i know as much as the next guy. Did you try to ask Niresh himself? Can;t you start over with a method like this one - http://www.insanelym...-for-beginners/ - you just need to put the amd_kernel of the first post of the topic "Mountain Lion Kernel Testing" in the place of the stock mach_kernel, it should work. All the best! I still have a usb drive with ML. I installed it with a program that I can't say in this forum. After installation I put the amd_kernel in the place of stock but doesn't work Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/12/#findComment-1898275 Share on other sites More sharing options...
theconnactic Posted March 18, 2013 Share Posted March 18, 2013 Well, i wouldn't recommend Voldemort's tools here, they're cursed. But since you already have it, try to boot with it with the flags amd_kernel arch=x86_64 npci=0x2000 -f -v and post a picture of where it hangs, if it hangs. Good luck. Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/12/#findComment-1898276 Share on other sites More sharing options...
iskorini Posted March 18, 2013 Share Posted March 18, 2013 Well, i wouldn't recommend Voldemort's tools here, they're cursed. But since you already have it, try to boot with it with the flags amd_kernel arch=x86_64 npci=0x2000 -f -v and post a picture of where it hangs, if it hangs. Good luck. If i boot with amd_kernel arch=x86_64 npci=0x2000 -f -v it say amd kernel not found. (On my friend's mac i still have replaced the stock mach_kernel with amd_kernel) If i boot with arch=x86_64 npci=0x2000 -f -v it say something about framebuffer so i add GraphicsEnabler=no and after few second (at the end of reading HFS+) it reboot Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/12/#findComment-1898283 Share on other sites More sharing options...
theconnactic Posted March 18, 2013 Share Posted March 18, 2013 If i boot with amd_kernel arch=x86_64 npci=0x2000 -f -v it say amd kernel not found. (On my friend's mac i still have replaced the stock mach_kernel with amd_kernel) Make sure the amd_kernel has this name, amd_kernel. If it's called otherwise, you'll have to rename it. If i boot with arch=x86_64 npci=0x2000 -f -v it say something about framebuffer so i add GraphicsEnabler=no and after few second (at the end of reading HFS+) it reboot Of course: it's trying to boot the stock kernel which, surprise!, won't work with AMD. Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/12/#findComment-1898292 Share on other sites More sharing options...
iskorini Posted March 18, 2013 Share Posted March 18, 2013 Make sure the amd_kernel has this name, amd_kernel. If it's called otherwise, you'll have to rename it. Of course: it's trying to boot the stock kernel which, surprise!, won't work with AMD. I don't have the original mach_kernel because i've renamed amd_kernel in mach_kernel, now with Mac Drive (on Windows, i don't have a Mac) I put in the usb drive the amd_kernel, right? EDIT: It reboot... Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/12/#findComment-1898307 Share on other sites More sharing options...
mac_carol Posted March 18, 2013 Share Posted March 18, 2013 @iskorini add busratio=15 to your bootflags btw, which kernel are you using? Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/12/#findComment-1898311 Share on other sites More sharing options...
iskorini Posted March 18, 2013 Share Posted March 18, 2013 (edited) @iskorini add busratio=15 to your bootflags btw, which kernel are you using? I use this kernel: http://www.insanelym...testing-on-amd/ Now i test busratio=15. Same result, it reboot Edited March 18, 2013 by iskorini Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/12/#findComment-1898316 Share on other sites More sharing options...
mac_carol Posted March 18, 2013 Share Posted March 18, 2013 maybe your bootloader is the problem since you have the latest version of AMD, try one of these options: - if you're using Chameleon, you may try sinetek's kernel - but if you want to run the osx with AnV's kernel, then I suggest you to install the Clover as your bootloader Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/12/#findComment-1898327 Share on other sites More sharing options...
iskorini Posted March 18, 2013 Share Posted March 18, 2013 maybe your bootloader is the problem since you have the latest version of AMD, try one of these options: - if you're using Chameleon, you may try sinetek's kernel - but if you want to run the osx with AnV's kernel, then I suggest you to install the Clover as your bootloader I have a PC with Windows 7, how can I do that? http://wiki.osx86pro...Patched_Kernels My CPU don't support SSSE3, so i can't use the Sinetek's kernel, right? Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/12/#findComment-1898331 Share on other sites More sharing options...
Shaneee Posted March 18, 2013 Share Posted March 18, 2013 I have a PC with Windows 7, how can I do that? http://wiki.osx86pro...Patched_Kernels My CPU don't support SSSE3, so i can't use the Sinetek's kernel, right? Make sure the kernel is on the root of your USB drive and type the following, amd_kernel -x -f -v See if that works. Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/12/#findComment-1898334 Share on other sites More sharing options...
mac_carol Posted March 18, 2013 Share Posted March 18, 2013 1st option: copy the kernel using transmac / macdrive 2nd one: it requires virtual-osx (vmware / vbox) EDIT: sinetek's kernel supports both SSSE3 native & emu ( https://meklort.com/~sinet3k/ ) Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/12/#findComment-1898337 Share on other sites More sharing options...
iskorini Posted March 18, 2013 Share Posted March 18, 2013 1st option: copy the kernel using transmac / macdrive 2nd one: it requires virtual-osx (vmware / vbox) EDIT: sinetek's kernel supports both SSSE3 native & emu ( https://meklort.com/~sinet3k/ ) Which kernel i must download? Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/12/#findComment-1898339 Share on other sites More sharing options...
whoareyou Posted March 18, 2013 Share Posted March 18, 2013 No: that means Apple didn't make OSX for AMD CPUs (or non-Apple hardware, by the way). But that doesn't mean you should throw in the towel: post a picture of the kernel panic here. Best regards! Do you have the RAID option? Use it: RAID usually implies AHCI. Nope, there are no SATA mode options whatsoever... Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/12/#findComment-1898355 Share on other sites More sharing options...
Shaneee Posted March 18, 2013 Share Posted March 18, 2013 Nope, there are no SATA mode options whatsoever... If its your PC your trying this on then you have a similar motherboard to me with the nForce chipset. Install the attached kext to System/Library/Extensions and try booting again. AppleNForceATA.kext.zip Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/12/#findComment-1898356 Share on other sites More sharing options...
whoareyou Posted March 18, 2013 Share Posted March 18, 2013 If its your PC your trying this on then you have a similar motherboard to me with the nForce chipset. Install the attached kext to System/Library/Extensions and try booting again. AppleNForceATA.kext.zip Thanks, ill try that on the Desktop, but sadly, im actually trying to get it to work on my laptop right now as thats my main device currently... Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/12/#findComment-1898359 Share on other sites More sharing options...
Shaneee Posted March 18, 2013 Share Posted March 18, 2013 Thanks, ill try that on the Desktop, but sadly, im actually trying to get it to work on my laptop right now as thats my main device currently... You could try it on your laptop aswell. HP site doesn't mention the chipset used but most HP / Compaq seem to be nForce. Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/12/#findComment-1898364 Share on other sites More sharing options...
zozourban Posted March 18, 2013 Share Posted March 18, 2013 Please update your signature: we need your complete specs to provide any help. Boot with -v and post a picture of where it freezes. my signature is good ? Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/12/#findComment-1898373 Share on other sites More sharing options...
whoareyou Posted March 18, 2013 Share Posted March 18, 2013 You could try it on your laptop aswell. HP site doesn't mention the chipset used but most HP / Compaq seem to be nForce. Its AMD E2 Vision i think Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/12/#findComment-1898376 Share on other sites More sharing options...
iskorini Posted March 18, 2013 Share Posted March 18, 2013 1st option: copy the kernel using transmac / macdrive 2nd one: it requires virtual-osx (vmware / vbox) EDIT: sinetek's kernel supports both SSSE3 native & emu ( https://meklort.com/~sinet3k/ ) "good news"!(?) If i boot with fx_kernel, arch=x86_64, GraphicsEnabler=no, -v the pc don't reboot, but it does a Kernel Panic... https://dl.dropbox.com/u/66378216/2013-03-18%2021.26.06.jpg Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/12/#findComment-1898425 Share on other sites More sharing options...
Shaneee Posted March 18, 2013 Share Posted March 18, 2013 "good news"!(?) If i boot with fx_kernel, arch=x86_64, GraphicsEnabler=no, -v the pc don't reboot, but it does a Kernel Panic... https://dl.dropbox.c...18 21.26.06.jpg For that kernel you will need to replace the vanilla Corecrypto kext in System/Library/Extensions with this one, http://cl.ly/0o3s0d2c001A Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/12/#findComment-1898432 Share on other sites More sharing options...
iskorini Posted March 18, 2013 Share Posted March 18, 2013 For that kernel you will need to replace the vanilla Corecrypto kext in System/Library/Extensions with this one, http://cl.ly/0o3s0d2c001A BOOT! But... https://dl.dropbox.c...18 22.11.17.jpg xD It's a USB drive installated with a original copy of ML downloaded from the Apple (app?) Store on my friend's mac. Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/12/#findComment-1898439 Share on other sites More sharing options...
zozourban Posted March 18, 2013 Share Posted March 18, 2013 Hi, i have a problem, i try to install 10.8 in retail but i stuck here : I use Chameleon 1820 trunk 10.8 ML with flag : -v -f -nossse3bit maxmem=2048 npci=0x3000 busratio=15 My smbios is mac pro 5,1 kernel is mach_ssse42_only by sinetek Processor : Athlon II x4 640 , Graphic card : Ati HD 5770 chipset nforce 630a On my pc i have 10.6.8 and 10.7.5 fully working ! Thanks I need help please i don't understand... that problem i tried one other Nforce ata GE=No or Yes same error.. Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/12/#findComment-1898446 Share on other sites More sharing options...
Recommended Posts