[pre-release] macOS Monterey

[chris1111]

 Geforce 710 support is Gone

But HD 4600 still works good on my ProDesk 600 G1😃

 

[AlfredoM]

1 hour ago, SavageAUS said:

From what I’m reading the update should appear, download it, reboot with different smbios, next reboot revert back to proper smbios and continue update. The problem I have is not the downloading or installing but the update not showing up at all.


Sent from my iPhone using Tapatalk
From where?


Sent from my iPhone using Tapatalk

Yes WHERE ????

 

[SavageAUS]

1 minute ago, eSaF said:

Ok let's cut to the basic and the obvious - Insure your Update Setting is as shown to start with.

  Reveal hidden contents

 

Certainly is.

I'm going to reboot and clear nvram and try again.

[Matgen84]

Hi @eSaF @ic005k and all users

 

Why SMBIOS Imac17,1 is necessary to update  Beta 7 from Beta 6. Via Clover, I can download it with Imac19,1, but can't install... (loop on macOS Install)

Any ideas ! Please.

[FredWst]

Hi,

 

I got this log (loop reboot)

[Partime]

I'm either confused or have a problem or both.....

 

based on what I read above, I changed my model to imac17,1 and set SecureBootModel to disable.

Once I rebooted I was able to DL the update.

 

However, once going through the install and rebooting the update never took and it looks to do it again....the loop.

 

So how do I get out of this loop? If I change everything back and rebook, I'm guessing the update won't be available to DL again....

[Riley Freeman]

1 hour ago, chris1111 said:

 Geforce 710 support is Gone

 

Ouch. I hope they haven't completely killed Kepler support as I have a 670 on my Monterey hack.

 

I tried the update yesterday but after I got back to the desktop (after what looked like a successful update) the update was still showing up in Software Update. Checking the build on my system I was still on B6.

 

Looking at the update partition the last_update_result.plist gives this as the reason for the update failing: MSU 1140 (EFI ROM does not support large BaseSystems).

 

I'm using MP6,1 SMBIOS here. Not going to change it for a beta update so I'll sit this one out and see if it's a bug or something more significant.

[FredWst]

Hi,

 

Update was not shown on my hack MacBookPro16,2.

I setup OC secure boot config.

ForceSecureBootScheme : YES

DmgLoading : Signed

SecureBootModel : j214k

 

 After reboot, update is proposed.

 

SecureBoot, Tpm, Sgx disable in bios.

 

But still Loop reboot after update (see error post before.)

 

Fred

 

Edited September 22, 2021 by FredWst

[chris1111]

53 minutes ago, Riley Freeman said:

 

Ouch. I hope they haven't completely killed Kepler support as I have a 670 on my Monterey hack.

 

I tried the update yesterday but after I got back to the desktop (after what looked like a successful update) the update was still showing up in Software Update. Checking the build on my system I was still on B6.

 

Looking at the update partition the last_update_result.plist gives this as the reason for the update failing: MSU 1140 (EFI ROM does not support large BaseSystems).

 

I'm using MP6,1 SMBIOS here. Not going to change it for a beta update so I'll sit this one out and see if it's a bug or something more significant.

Kepler is Killed

but some patch exist since yesterday

 

 

 

[WizeMan]

Developers be aware that Xcode 12.5.1 does not run on Monterey Beta 7. I am skipping this update and any update until they fix this.

[greythorne]

2 hours ago, FredWst said:

Hi,

 

I got this log (loop reboot)

Please see the screenshot i got of the last message during installation. make sense to anyone?

[Guest 5T33Z0]

42 minutes ago, chris1111 said:

Kepler is Killed

but some patch exist since yesterday

 

 

 

 

Arghhhh, I have a GTX 760. How do I apply this patch?

Edited September 22, 2021 by 5T33Z0

[chris1111]

36 minutes ago, 5T33Z0 said:

 

Arghhhh, I have a GTX 760. How do I apply this patch?

I use my  Kext-Install.app with the patch Binaries files

Install done Reboot 

Test on DELL Optiplex 790 Sandy bridge system i5 2500K UEFI booting OpenCore 0.7.3  Works well 

[greythorne]

4 hours ago, ic005k said:

Set "SystemProductName" to iMac17, 1, and change it back to your own model after the update is complete.

Wow this worked man! The only thing i changed was the "SystemProductName" to iMac17,1 and the update went thru. No messing with SecureBoot Model needed.

 

Anyone can explain why iMac17,1?

[Guest 5T33Z0]

6 minutes ago, chris1111 said:

I use my  Kext-Install.app with the patch Binaries files

Install done Reboot 

Test on DELL Optiplex 790 Sandy bridge system i5 2500K UEFI booting OpenCore 0.7.3  Works well 

 

So you do ths in post via screen sharing or how?

Or before the install?

[Matgen84]

Hi @all

Using Clover, I can download the new Beta. But SMBIOS Imac17,1 failed for my Z390, to update Beta 7. I don't know why 😪

So I want to remove "macOS Install Data" folder. I find 3 strange folder in System/Volumes/Monterey

• macOS Install Data (11,7Go) --->2021-07-06
• Previous Content (256,6Mo) ----> 2021-09-05 (Probably from previous   Beta !)
• Boot folder. (283,2Mo) ---> 2021-09-15.   With  a lot of .im4m files and the X86_64SURamdisk.dmg

Spoiler

 

 

Spoiler

 

 

 

macOS Install Data folder this normal, but the date is incorrect (the version too I suppose). Does anyone have an idea on these files/folders, it is the first time that I notice their presence except macOS Install Data folder of course.

Edited September 22, 2021 by Matgen84

[chris1111]

47 minutes ago, 5T33Z0 said:

 

So you do ths in post via screen sharing or how?

Or before the install?

After Update B7 I use my app 

I will make a  new page on github today

[FredWst]

3 hours ago, Riley Freeman said:

 

Ouch. I hope they haven't completely killed Kepler support as I have a 670 on my Monterey hack.

 

I tried the update yesterday but after I got back to the desktop (after what looked like a successful update) the update was still showing up in Software Update. Checking the build on my system I was still on B6.

 

Looking at the update partition the last_update_result.plist gives this as the reason for the update failing: MSU 1140 (EFI ROM does not support large BaseSystems).

 

I'm using MP6,1 SMBIOS here. Not going to change it for a beta update so I'll sit this one out and see if it's a bug or something more significant.

 

 

With last OC build b7 update successfully hack iMac18,3.

 

Error -> "EFI ROM does not support large BaseSystems" as gone

 

Fred

[Riley Freeman]

1 minute ago, FredWst said:

With last OC build b7 update successfully hack iMac18,3.

 

Error -> "EFI ROM does not support large BaseSystems" as gone

 

Fred

 

Thanks Fred! I only run the release builds so I'm still on 0.7.3.

 

The drop of Kepler support is a bigger issue now. I'll check out the Kepler patch along with the next official OC release but this might be where I call it quits with Monterey and go back to something earlier.

[FredWst]

@vit9696

 

Hack MacBookPro16,2 with Secure boot set in config.plist ApECID=0 and secureBootModel=j214k

I got update b7 proposed to update.

But got this error below. OC bug or bad config.plist ?

 

 

 

Edit: update ok change -> secureBootModel to Disabled and back to j214k

 

Fred

 

 

Edited September 22, 2021 by FredWst
update ok change -> secureBootModel to Disabled and back to j214k

[Anto65]

full installer macOS 12 Beta 7 (21a5522h)

https://swcdn.apple.com/content/downloads/06/05/002-02555-A_W1UDYXDDUZ/aorhr3psk29e00zwe7r41ur3humfp9cf80/InstallAssistant.pkg

Edited September 22, 2021 by antuneddu

[bisdak4920]

This update solves the problem of Windows  disk appearing as external disk.

[Anto65]

6 minutes ago, meaganmargaret said:

 

 

Well even after downloading the full installer as listed by @antuneddu, I got the same error.  Must be my old Z370.....

 

Have you launched the app or created the usb?
Because if I launch the app it seems to work

 

 

but if I try to create the usb it says that the installer is not valid

 

TINU app 

 

I'm wrong, or the installer has some problem ... I downloaded it 2 times 🤔

[Partime]

I just DL'd the full installer.

Unfortunately it reboots into a loop. 

 

 

[Djlild7hina]

OC has a new build that should let you install. Install completed on my X299 build

 

https://github.com/acidanthera/OpenCorePkg/commit/1cb8490fd60f6b5f983d42e5bbf08e3d2d43d8f6

Edited September 22, 2021 by Djlild7hina