rlf Posted June 12, 2017 Share Posted June 12, 2017 try the genericusbxhci kext and the fakepciid kext with fakepciid the fakepciid for xhci (you need both the standard and the xhci version of fake pciid) Thanks. I finally had to use Rehabman's USBInjectAll kext. Now dealing with graphics problems. 1 Link to comment https://www.insanelymac.com/forum/topic/324233-mac-os-high-sierra-installation-attempts/page/8/#findComment-2442984 Share on other sites More sharing options...
MNSiw Posted June 12, 2017 Share Posted June 12, 2017 Tried createmedia, then manual restore copy to create USB, use kexts from working Sierra, then tried other kexts from this thread, nothing worked for me, it boot to language selection screen and then stuck there, finally used Core.pkg method and now on High Sierra, Wi-Fi, sound, display, all working. Is there any way to switch to APFS without reinstall? Link to comment https://www.insanelymac.com/forum/topic/324233-mac-os-high-sierra-installation-attempts/page/8/#findComment-2443053 Share on other sites More sharing options...
Dec_Bra1n Posted June 12, 2017 Share Posted June 12, 2017 try the genericusbxhci kext and the fakepciid kext with fakepciid the fakepciid for xhci (you need both the standard and the xhci version of fake pciid) I have tried like everything to set up the MacOS High Sierra using (USB + Clover / clover+HDD) i have tried createmedia , manual restore method and the method which is mention on this threat (PreLinkedKernel) but all failed only one method works which is Core.Pkg install on clean HFS+ partition. but don't know how to Convert HFS+ to APFS also tried clover r4079 to r4084 with New APFS Supported Firmware (BiosVersion) almost tried every SMBIOS with supported APFS Firmware. Every time i try to install i stuck at "Disk Utility" it takes more than 30 min to load all hard drives which is strange and never reach to successfully clean Drive any help can be appreciated. Config:- i7 2630qm Intel HD 3000,8GB ram SSD+HDD 1 Link to comment https://www.insanelymac.com/forum/topic/324233-mac-os-high-sierra-installation-attempts/page/8/#findComment-2443127 Share on other sites More sharing options...
MNSiw Posted June 13, 2017 Share Posted June 13, 2017 I have tried like everything to set up the MacOS High Sierra using (USB + Clover / clover+HDD) i have tried createmedia , manual restore method and the method which is mention on this threat (PreLinkedKernel) but all failed only one method works which is Core.Pkg install on clean HFS+ partition. but don't know how to Convert HFS+ to APFS I have same problem, High Sierra working perfect using Core method but without APFS, there in Sierra we can format using APFS, what about formatting the drive like that and then installing High Sierra. Link to comment https://www.insanelymac.com/forum/topic/324233-mac-os-high-sierra-installation-attempts/page/8/#findComment-2443469 Share on other sites More sharing options...
surfinchina Posted June 13, 2017 Share Posted June 13, 2017 I have same problem, High Sierra working perfect using Core method but without APFS, there in Sierra we can format using APFS, what about formatting the drive like that and then installing High Sierra. I installed high sierra to apfs just by double clicking on the install beta from inside 10.12.3. It's about 10% faster on my 960 evo Have you tried installing over your high sierra install? Then just tick the box for apfs format during the install process. 1 Link to comment https://www.insanelymac.com/forum/topic/324233-mac-os-high-sierra-installation-attempts/page/8/#findComment-2443470 Share on other sites More sharing options...
Dec_Bra1n Posted June 13, 2017 Share Posted June 13, 2017 I have same problem, High Sierra working perfect using Core method but without APFS, there in Sierra we can format using APFS, what about formatting the drive like that and then installing High Sierra. I did exactly same but following method does not create recovery partition we need solution for this I installed high sierra to apfs just by double clicking on the install beta from inside 10.12.3. It's about 10% faster on my 960 evo Have you tried installing over your high sierra install? Then just tick the box for apfs format during the install process. Yes I tried but once I reboot it won't start the installation i just got blank screen no error nothing Link to comment https://www.insanelymac.com/forum/topic/324233-mac-os-high-sierra-installation-attempts/page/8/#findComment-2443472 Share on other sites More sharing options...
surfinchina Posted June 13, 2017 Share Posted June 13, 2017 I did exactly same but following method does not create recovery partition we need solution for this Yes I tried but once I reboot it won't start the installation i just got blank screen no error nothing And apfs.efi is in drivers64UEFI? My ionvmefamily and voodooTSCSync kexts broke my install. Removing those breaks 10.12 but fixes 10.13. For me that is. Plus the latest clover is important. I don't think installing from high sierra to high sierra on the same drive would work. It'd format the apfs over the install file so break at first reboot. I have 2 cloned SSDs and installed from one 10.12 to another 10.12 on a seperate drive. Link to comment https://www.insanelymac.com/forum/topic/324233-mac-os-high-sierra-installation-attempts/page/8/#findComment-2443473 Share on other sites More sharing options...
Dec_Bra1n Posted June 13, 2017 Share Posted June 13, 2017 Yes I also have 2seprate disk for this experiment. Yes I added apfs.efi and I never use voodootscsync and tried with latest clover ? I also tried this form 10.12.5 core method to 10.13 then from 10.13 i create apfs partition and again core method on different partition. Link to comment https://www.insanelymac.com/forum/topic/324233-mac-os-high-sierra-installation-attempts/page/8/#findComment-2443484 Share on other sites More sharing options...
Dec_Bra1n Posted June 13, 2017 Share Posted June 13, 2017 This screen i got when I try to install from sierra with install macOS 10.13 beta.app 1 Link to comment https://www.insanelymac.com/forum/topic/324233-mac-os-high-sierra-installation-attempts/page/8/#findComment-2443493 Share on other sites More sharing options...
mgroovy Posted June 13, 2017 Share Posted June 13, 2017 up up Link to comment https://www.insanelymac.com/forum/topic/324233-mac-os-high-sierra-installation-attempts/page/8/#findComment-2443502 Share on other sites More sharing options...
Dec_Bra1n Posted June 13, 2017 Share Posted June 13, 2017 up See this https://github.com/toleda/audio_alc283 1 Link to comment https://www.insanelymac.com/forum/topic/324233-mac-os-high-sierra-installation-attempts/page/8/#findComment-2443517 Share on other sites More sharing options...
mgroovy Posted June 13, 2017 Share Posted June 13, 2017 See this https://github.com/toleda/audio_alc283 doesn't work, but solved problem alone editing toleda 120 command. This is the link to zip file , if you need https://www.mediafire.com/?8ifjkbcd0bzc8s9 Link to comment https://www.insanelymac.com/forum/topic/324233-mac-os-high-sierra-installation-attempts/page/8/#findComment-2443535 Share on other sites More sharing options...
Graeme43 Posted June 13, 2017 Share Posted June 13, 2017 With my Z97 i5 4690K, I added the firmware thing then updated to clover 4084, added APFS stuff then I just cloned my existing 10.12.5 to a secondary partition in a vmware 8 OS X 10.12. I ran the updater on my install through vmware, cloned back afterwards to second partition. It just booted first time, going to install nvidia driver now Link to comment https://www.insanelymac.com/forum/topic/324233-mac-os-high-sierra-installation-attempts/page/8/#findComment-2443544 Share on other sites More sharing options...
MNSiw Posted June 13, 2017 Share Posted June 13, 2017 I installed high sierra to apfs just by double clicking on the install beta from inside 10.12.3. It's about 10% faster on my 960 evo Have you tried installing over your high sierra install? Then just tick the box for apfs format during the install process. Doing same on working Sierra 10.12.6, added an other partition to SSD for High Sierra. What about apfs kext, do we need that when using this method? Sent from my XT1060 using Tapatalk Link to comment https://www.insanelymac.com/forum/topic/324233-mac-os-high-sierra-installation-attempts/page/8/#findComment-2443563 Share on other sites More sharing options...
ITzTravelInTime Posted June 13, 2017 Author Share Posted June 13, 2017 For mac os betas i recommend to not go with the scripts and just use voodoo hda or apple alc + lilu with -lilubeta and -alcbeta boot args, so try that Link to comment https://www.insanelymac.com/forum/topic/324233-mac-os-high-sierra-installation-attempts/page/8/#findComment-2443583 Share on other sites More sharing options...
richard.szemeredi Posted June 13, 2017 Share Posted June 13, 2017 What can I do when my boot hangs? Clover says: task_exceeded_footprint: failed to warn the current task (73 exciting, or no handler registered?). Link to comment https://www.insanelymac.com/forum/topic/324233-mac-os-high-sierra-installation-attempts/page/8/#findComment-2443709 Share on other sites More sharing options...
ccphuc2016 Posted June 13, 2017 Share Posted June 13, 2017 This screen i got when I try to install from sierra with install macOS 10.13 beta.app this make USB High Seirra not origin you do not watch youtube video make USB do not copy prelinkedkernel to .IABootFiles folder https://www.youtube.com/watch?v=y6XPUq6jEO0 Link to comment https://www.insanelymac.com/forum/topic/324233-mac-os-high-sierra-installation-attempts/page/8/#findComment-2443767 Share on other sites More sharing options...
Dec_Bra1n Posted June 13, 2017 Share Posted June 13, 2017 this make USB High Seirra not origin you do not watch youtube video make USB do not copy prelinkedkernel to .IABootFiles folder https://www.youtube.com/watch?v=y6XPUq6jEO0 Not works i tried almost everything Sent from my XT1562 using Tapatalk 1 Link to comment https://www.insanelymac.com/forum/topic/324233-mac-os-high-sierra-installation-attempts/page/8/#findComment-2443772 Share on other sites More sharing options...
ccphuc2016 Posted June 13, 2017 Share Posted June 13, 2017 Not works i tried almost everything Sent from my XT1562 using c oh me in Viet Nam use facebook https://www.facebook.com/phuc.chungchi.9 Link to comment https://www.insanelymac.com/forum/topic/324233-mac-os-high-sierra-installation-attempts/page/8/#findComment-2443776 Share on other sites More sharing options...
MNSiw Posted June 13, 2017 Share Posted June 13, 2017 For now only working option for me is Core.pkg, mean without APFS, don't know what causing this stuck on Loading disks or blue screen before language selection, its extremely slow at those steps. Sent from my XT1060 using Tapatalk 2 Link to comment https://www.insanelymac.com/forum/topic/324233-mac-os-high-sierra-installation-attempts/page/8/#findComment-2443812 Share on other sites More sharing options...
Dec_Bra1n Posted June 13, 2017 Share Posted June 13, 2017 For now only working option for me is Core.pkg, mean without APFS, don't know what causing this stuck on Loading disks or blue screen before language selection, its extremely slow at those steps. Sent from my XT1060 using Tapatalk Same issue for me 1 Link to comment https://www.insanelymac.com/forum/topic/324233-mac-os-high-sierra-installation-attempts/page/8/#findComment-2443818 Share on other sites More sharing options...
GIEBELWALD Posted June 13, 2017 Share Posted June 13, 2017 Same issue for me The same here... Link to comment https://www.insanelymac.com/forum/topic/324233-mac-os-high-sierra-installation-attempts/page/8/#findComment-2443832 Share on other sites More sharing options...
Dec_Bra1n Posted June 13, 2017 Share Posted June 13, 2017 The same here... Finally with too much efforts i am able boot now.... but cursor gone that can be fix Link to comment https://www.insanelymac.com/forum/topic/324233-mac-os-high-sierra-installation-attempts/page/8/#findComment-2443917 Share on other sites More sharing options...
Dec_Bra1n Posted June 13, 2017 Share Posted June 13, 2017 Guys now successfully working everything what I did is 1:- On Sierra I install High Sierra via Beta.app (HFS+ mode) 2:-On Plist I use 0xff1fff3f as a firmware features (also tried bunch of APFS Supported Firmwares but failed) 3:-Once after successfully booted with High Sierra I boot the Recovery Disk (HS recovery) and convert the partition from HFS+ to APFS. 1 Link to comment https://www.insanelymac.com/forum/topic/324233-mac-os-high-sierra-installation-attempts/page/8/#findComment-2444027 Share on other sites More sharing options...
MNSiw Posted June 14, 2017 Share Posted June 14, 2017 Guys now successfully working everything what I did is 1:- On Sierra I install High Sierra via Beta.app (HFS+ mode) 2:-On Plist I use 0xff1fff3f as a firmware features (also tried bunch of APFS Supported Firmwares but failed) 3:-Once after successfully booted with High Sierra I boot the Recovery Disk (HS recovery) and convert the partition from HFS+ to APFS. Thanks for sharing, mean this firmware thing has something to do with that freeze on blue screen issue. Where did you add this, on top or on bottom of SMBIOS? Would you mind sharing your plist. What about selecting APFS on Beta.app, have you tried that first? I got it working too, here's what I did: Split my working Sierra SSD to three partitions, Sierra, High and APFS Intalled High Sierra to High partition using Core.pkg Booted to High and erased APFS partition with APFS file system Run Core.pkg again to install High Sierra to APFS partition It's working fine with sound, Wi-Fi and display etc, but it's not something proper and it don't update / create recovery. Link to comment https://www.insanelymac.com/forum/topic/324233-mac-os-high-sierra-installation-attempts/page/8/#findComment-2444129 Share on other sites More sharing options...
Recommended Posts