macOS Sonoma Wireless Issues Discussion.

[mnfesq]

I installed Sonoma RC1 to my main system partition believing that Sonoma was running smoothly enough on my test partition to justify it.  However, I encountered a problem with OCLP patching of the wireless adapter that I had not encountered on my test partition. (Both use the same EFI to boot.)

 

 

Has anyone else encountered this?  These are essential kexts and I have the most current versions installed.  Any ideas what to do?  I have tried the recommended installation settings but keep getting this patch failure.  Thanks for your suggestions.

 

EDIT:  Problem solved.  This error was caused primarily because this was not a clean install.  It appears that, in June 2022, I put a copy of VirtualSMC into my /Library/Extensions/ folder.  It was version 1.3.0.  The current version is 1.3.3.  The dependencies are different. That is what caused OCLP to not be able to find the dependent kext.  Case closed. (Yay!)

Edited September 16, 2023 by mnfesq

[jlrycm]

Hello everyone! Would these wifi-BT cards work in macOS Sonoma?

Gigabyte WiFi 6E GC-WBAX2400R (2x2 802.11 ax/Tri-Band WiFi (2.4GHz, 5GHz, & 6GHz)/ Bluetooth 5.3/ MU-MIMO/ WPA3/ PCIe Expansion Card) https://a.co/d/9aeGYQw

 

PCI-E WiFi Card for MacOS Windows 7/8/10/11 802.11a/g/n/ac BT 4.0 PCI-E PCI Network Adapter mac-Compatible Wi-Fi AirDrop Handoff Instant Hotspot macOS MIMO Mac OS X natively Supported BCM4360 AC1200 https://a.co/d/8Iofwm0

 

Edited September 16, 2023 by jlrycm

[jlrycm]

1 hour ago, eSaF said:

The Fenvi one should be ok with the OCLP patch.

Don't know about the Gigabyte one.

Thanks @eSaF I have the Fenvi installed in my build. I was asking about the Gigabyte one because it has the Realtek RTL8852CE and I read before that it may be a prospect if kexts are available.

[Slice]

On 9/17/2023 at 2:10 AM, jlrycm said:

Thanks @eSaF I have the Fenvi installed in my build. I was asking about the Gigabyte one because it has the Realtek RTL8852CE and I read before that it may be a prospect if kexts are available.

Even for linux there is a problem to get a driver. May be some developer wish to create the driver for macOS based on codes for Linux. We will applaud him.

[Alpha22]

question: certainly has already been done, I wanted to ask for a card like Fenvi T919 that is native with macOS Sonoma with chipset Broadcom 

[Cyberdevs]

13 minutes ago, Alpha22 said:

question: certainly has already been done, I wanted to ask for a card like Fenvi T919 that is native with macOS Sonoma with chipset Broadcom 

If it has native support in macOS you can use OCLP to patch it

[Alpha22]

1 minute ago, Cyberdevs said:

If it has native support in macOS you can use OCLP to patch it

I meant without using any patches

[Cyberdevs]

Without the patches it won't work, unless Sonoma supports is natively like the WiFi chips in 2019 and 2020 iMacs or any other Mac computer that is natively supported with macOS Sonoma.

[Alpha22]

question: once I have used the OCLP patch, can I put csr-active-config back 00000000 or should I leave it 03080000

[Cyberdevs]

Just now, Alpha22 said:

question: once I have used the OCLP patch, can I put csr-active-config back 00000000 or should I leave it 03080000

You need to keep SIP set as 030800000, if you use 00000000 it will prevent for added kext to load properly unless the devs find a way to go around SIP.

[Alpha22]

2 minutes ago, Cyberdevs said:

You need to keep SIP set as 030800000, if you use 00000000 it will prevent for added kext to load properly unless the devs find a way to go around SIP.

thanks for the answers

[DuongTHVN]

Any solution for DW1560 a.k.a BCM94352z?

 

when i use AirportBrcmFixup.kext and AirportBrcmFixup.kext/Contents/PlugIns/AirPortBrcmNIC_Injector.kext it not show on hackintool and no wifi =.=

[miliuco]

@DuongTHVN

 

New device-ids have been added to the latest OCLP Sonoma 0.6.9:

• device-id pci12e4,43B1 >> BCM4352
• device-id pci12e4,43B2 >> BCM4352 (2.4 GHz).

What is yours?

 

[SavageAUS]

Can we use AMFIPass.kext instead of the boot arg? Using the boot arg make Logitech G Hub not work at all.


Sent from my iPhone using Tapatalk

[Cyberdevs]

3 minutes ago, SavageAUS said:

Can we use AMFIPass.kext instead of the boot arg? Using the boot arg make Logitech G Hub not work at all.

Yes you can. You just might need to use -amfipassbeta boot arg. I'm not sure if the kexts has been updated yet.

[miliuco]

5 hours ago, Cyberdevs said:

Yes you can. You just might need to use -amfipassbeta boot arg. I'm not sure if the kexts has been updated yet.

Kexts seems to be unchanged, boot arg still required. 

[Max.1974]

On 9/28/2023 at 10:40 AM, miliuco said:

@DuongTHVN

 

New device-ids have been added to the latest OCLP Sonoma 0.6.9:

• device-id pci12e4,43B1 >> BCM4352
• device-id pci12e4,43B2 >> BCM4352 (2.4 GHz).

What is yours?

 

 

My friend, can you said to me if device  BCM4352, pci14e4,43b1 is included on OCLP 0.6.9? We can include manually? 

Im use with compatible Device Properties on Opcencore plist, and works fine, but with this new release from Sonoma and compiled OCLP or use Nitghly Build not works

But I need use AirportBrcmFixup.kext with Ventura to works. 

 

Thanks all 

[SavageAUS]

Yes you can. You just might need to use -amfipassbeta boot arg. I'm not sure if the kexts has been updated yet.

I’m not able to find the source of this kext. Only got a version from someone else’s EFI folder. Who is the author of the kext, do you know?


Sent from my iPhone using Tapatalk

[FirstCustomac]

12 minutes ago, SavageAUS said:

I’m not able to find the source of this kext. Only got a version from someone else’s EFI folder. Who is the author of the kext, do you know?

You can find it here

[SavageAUS]

28 minutes ago, FirstTimeCustomac said:

You can find it here

Thank you.

Working perfectly here.

 

Spoiler

 

[Shaneee]

Finally caved and updated my main system to 14.1. Glad to see AirDrop is working with my iPhone. Awesome work OCLP devs

[Max.1974]

23 minutes ago, cankiulascmnfye said:

 

1. It's called "due" not "do" repsect

2. More importantly: you are worng! Of course their are options in OpenCore which can be set to "Disabled". For example: Misc/Security/SecureBootModel: Disabled

 

What is your problem ? You have so angry with you, that is sad. Sorry my bad English is because im not use translator. Im said that the correct is Disabled. You can read right? 

 

It's very sad to see a person with so much potential be inhumane and critical, doesn't like to see the success of others and brags about copying and translating topics from the Chinese internet. He's been expelled several times that I know of. His fame precedes him. Badly educated and without the slightest sense, he publicly criticizes people. You don't have a spirit, just a banshee.

 

And respect with DUO or DO is a think that I have, not you....

Edited September 30, 2023 by Max.1974

[miliuco]

In the past hours, OCLP sonoma branch has been merged into main branch, currently the only updated branch. Devs are working hard to release OCLP 1.0.0 tomorrow. 

[SavageAUS]

In the past hours, OCLP sonoma branch has been merged into main branch, currently the only updated branch. Devs are working hard to release OCLP 1.0.0 tomorrow. 

From 0.6.9 beta to a 1.0 release.



Sent from my iPhone using Tapatalk

[Max.1974]

Hi guys, good news for my Lenovo.

 

Im use this boot-args and get my Broadcom BRCM4352 working great again, and fine Airdrop with OCLP 0.6.9, wi-fi 5G 

 

ipc_control_port_options=0 -brcmfxbeta alcid=14 -v -amfipassbeta -lilubetaall -keempsyms=1

 

And need use AirportBrcmFixup.kext active on Kernel menu 

 

Spoiler

 

 

Spoiler

 

 

 

Spoiler