Cyberdevs Posted July 8, 2022 Share Posted July 8, 2022 On the Kaby Lake rig I went through some hoops and jumps with the update failing to download but it finally completed. 4 Link to comment Share on other sites More sharing options...
miliuco Posted July 8, 2022 Share Posted July 8, 2022 1 hour ago, meaganmargaret said: Is there some reason why the RX 590 (slot 0) doesn't support Metal 3? Is it just because it's old? Yes, as ricoc90 says RX 580 / 590 (all Polaris chipset) are out of Metal 3. 1 Link to comment Share on other sites More sharing options...
MorenoAv Posted July 8, 2022 Share Posted July 8, 2022 I'm in the fight with macOS Ventura and I want to download the full installer, after following this thread @ricoc90 published a script to download the full update, the script works but the "--fetch-full-installer --full-installer-version 13.0" don't work because it says --fetch is an unknown command... Could you help me, please? Thank you 1 Link to comment Share on other sites More sharing options...
Donw35 Posted July 8, 2022 Share Posted July 8, 2022 10 hours ago, SavageAUS said: Does anyone else's screensaver lag? I am using the Drift screensaver it it gets very laggy. The OS works smooth but the screen saver moves very slow. Smooth here but I don't have the ability to change the refresh rate to 144hz, I was able to change it in Monterey. System specs 3 Ghz Quad-Core Intel i5 Intel HD Graphics 630 1536 MB 32 GB 2133 Mhz DDR4 1 Link to comment Share on other sites More sharing options...
PoMpIs Posted July 8, 2022 Share Posted July 8, 2022 1 minute ago, Donw35 said: Smooth here but I don't have the ability to change the refresh rate to 144hz, I was able to change it in Monterey. System specs 3 Ghz Quad-Core Intel i5 Intel HD Graphics 630 1536 MB 32 GB 2133 Mhz DDR4 In this beta 3, I can't use the variable frequency in mine... it makes playing videos have image corruption, and on certain occasions everything freezes for a few seconds... and it only happens to me in this beta 3, in the previouss and monterey if I could use variable frequency without problem But if I can have the 165Hz Link to comment Share on other sites More sharing options...
Guest ricoc90 Posted July 8, 2022 Share Posted July 8, 2022 (edited) 49 minutes ago, MorenoAv said: the script works but the "--fetch-full-installer --full-installer-version 13.0" don't work because it says --fetch is an unknown command... softwareopdate --fetch-full-installer --full-installer-version 13.0 It downloads Beta 2 though, beta 3 isn't available yet Edited July 8, 2022 by ricoc90 Link to comment Share on other sites More sharing options...
MorenoAv Posted July 8, 2022 Share Posted July 8, 2022 @ricoc90, Thank you... Now it works I was missing "software update" before the --fetch. It's downloading Beta 2 ... Link to comment Share on other sites More sharing options...
Common_Sense Posted July 8, 2022 Share Posted July 8, 2022 (edited) 58 minutes ago, PoMpIs said: In this beta 3, I can't use the variable frequency in mine... it makes playing videos have image corruption, and on certain occasions everything freezes for a few seconds... and it only happens to me in this beta 3, in the previouss and monterey if I could use variable frequency without problem But if I can have the 165Hz It looks good, don't want to sound like a jackass but what happens if you press the row Variable (48-165 hercios)? EDIT: Attached screenshot from my computer, it looks exactly the same, just press on the Variable row and the refresh rate should change? Edited July 8, 2022 by Common_Sense 1 Link to comment Share on other sites More sharing options...
zeus2000 Posted July 8, 2022 Share Posted July 8, 2022 6 hours ago, ricoc90 said: @zeus2000 Do you have a dGPU? Because your iGPU does not work in Ventura Hello @ricoc90 RX 580 8GB Link to comment Share on other sites More sharing options...
surenmunoo Posted July 8, 2022 Share Posted July 8, 2022 9 hours ago, PoMpIs said: @surenmunoo I have a Magic Trackpad, and if I use it I also get the same: what if i stop using it and use my logitech mouse before using the pmset command But in my case sleep works perfectly in beta 3... I had this problem of waking up after two seconds when Ventura beta 1 came out, I had to map the USBs again, Ventura doesn't like how I had it in Monterey What did you use to map usb? I use Hackintool 1 Link to comment Share on other sites More sharing options...
PoMpIs Posted July 8, 2022 Share Posted July 8, 2022 11 minutes ago, surenmunoo said: What did you use to map usb? I use Hackintool Hackintool does not work, or it has not worked for me, I have currently mapped them in windows... My b660 motherboard is a bit weird and has several internal Asmedia 107x USB HUBs and I've had quite a bit of trouble on MacOS getting everything to work just fine. 1 Link to comment Share on other sites More sharing options...
surenmunoo Posted July 8, 2022 Share Posted July 8, 2022 (edited) 14 minutes ago, PoMpIs said: Hackintool does not work, or it has not worked for me, I have currently mapped them in windows... My b660 motherboard is a bit weird and has several internal Asmedia 107x USB HUBs and I've had quite a bit of trouble on MacOS getting everything to work just fine. I tried in windows as well using usbmap but I failed to do it or just did not understand how to do it properly. Edited July 8, 2022 by surenmunoo Link to comment Share on other sites More sharing options...
Dracinn Posted July 8, 2022 Share Posted July 8, 2022 I get to the end of the download and it fails. Link to comment Share on other sites More sharing options...
miliuco Posted July 8, 2022 Share Posted July 8, 2022 (edited) @meaganmargaret As far as we have read, Vega 56 / 64 is the lower Metal 3 capable AMD dGPU. Intel Iris Plus Graphics series and Intel UHD Graphics 630 iGPU also. Do you have enable-metal for your AMD? This can get Metal 3 in the AMD system profiler although it’s not true. Edited July 8, 2022 by miliuco 3 Link to comment Share on other sites More sharing options...
Donw35 Posted July 8, 2022 Share Posted July 8, 2022 2 hours ago, PoMpIs said: In this beta 3, I can't use the variable frequency in mine... it makes playing videos have image corruption, and on certain occasions everything freezes for a few seconds... and it only happens to me in this beta 3, in the previouss and monterey if I could use variable frequency without problem But if I can have the 165Hz I don't even have that option, in my config.plist for device properties is this PciRoot(0x0)/Pci(0x2,0x0) AAPL,ig-platform-id = 00001259 1 Link to comment Share on other sites More sharing options...
Guest ricoc90 Posted July 8, 2022 Share Posted July 8, 2022 1 hour ago, meaganmargaret said: So, that sounds like you mean to say a Vega GPU (56 .r 64)would not be Metal 3 compatible, right? No, I meant to say that Metal 3 drops support for older cards except for Vega. It does support Vega, but Polaris has been competely dropped. The reason why System Information reports the RX 590 as being Metal 3 is because your iGPU is supported by Metal 3. I am not sure how this affects actual computing though. It Might be that macOS switches to the iGPU for Metal computing/rendering if it finds that the dGPU lacks certain capabilities, but I could be completely wrong Link to comment Share on other sites More sharing options...
PoMpIs Posted July 8, 2022 Share Posted July 8, 2022 34 minutes ago, Donw35 said: I don't even have that option, in my config.plist for device properties is this PciRoot(0x0)/Pci(0x2,0x0) AAPL,ig-platform-id = 00001259 Already... That's what happens to me on the i5. I have a Lenovo with an HD620 iGPU and officially according to the user manual in the HDMI output it only supports 1920x1080p@60Hz, forcing it with SwitchResX I have reached 3440x1440p, but only at 55Hz... and the same thing happens in windows... but I think that the HD630 can go up to 1080p 144Hz or 4K 60Hz Link to comment Share on other sites More sharing options...
Donw35 Posted July 8, 2022 Share Posted July 8, 2022 22 minutes ago, PoMpIs said: Already... That's what happens to me on the i5. I have a Lenovo with an HD620 iGPU and officially according to the user manual in the HDMI output it only supports 1920x1080p@60Hz, forcing it with SwitchResX I have reached 3440x1440p, but only at 55Hz... and the same thing happens in windows... but I think that the HD630 can go up to 1080p 144Hz or 4K 60Hz Yeah, in works @ 2560X1440 @ 144hz in Monterey 1 Link to comment Share on other sites More sharing options...
PoMpIs Posted July 8, 2022 Share Posted July 8, 2022 6 minutes ago, Donw35 said: Yeah, in works @ 2560X1440 @ 144hz in Monterey Well, it should work the same in Ventura... But, you know, it's a beta... I in this beta 3 in the Alder Laker, I have quite a few graphical errors when I use SVP+iiNA if I have the monitor in variable frequency, it even gave me a kernel panic (AMDRadeonX6000....) a while ago and this in beta 1 and 2 never did. apple fix one thing and another breaks. Link to comment Share on other sites More sharing options...
bisdak4920 Posted July 9, 2022 Share Posted July 9, 2022 12 hours ago, zeus2000 said: @bisdak4920 hello you can pass your efi folder, all my hackintosh are haswell... Greetings and thanks Here it is. generate you own serial. EFI.zip 1 1 Link to comment Share on other sites More sharing options...
Slice Posted July 9, 2022 Share Posted July 9, 2022 On 7/7/2022 at 8:02 PM, Download-Fritz said: I do what now? Can you find a description of the protocol 17A1D98C-9A6C-460B-A3AD-D5C9E76D2177 ? Link to comment Share on other sites More sharing options...
SavageAUS Posted July 9, 2022 Share Posted July 9, 2022 (edited) Can anyone see why i get a black screen when i try installing Ventura B1? I have the updated OC and Lilu for B3. This is for the AMD system in my signature. Current EFI attached that works with Monterey as well. EFI.zip Edited July 9, 2022 by SavageAUS Link to comment Share on other sites More sharing options...
BALDY_MAN Posted July 9, 2022 Share Posted July 9, 2022 (edited) @bisdak4920 Thank you very mutch for your kindness and shearing your wonderful EFI FOLDER. I have my z97 hack running Venture beta 3. Thank again I do have a resolution problem but I think that's down to my OLD Gpu (7970) UPDATE it was the old gpu . just fitted a and radeon 580. its all good Edited July 9, 2022 by BALDY_MAN 4 Link to comment Share on other sites More sharing options...
ruslan61 Posted July 9, 2022 Share Posted July 9, 2022 On 23.06.2022 at 20:50, antuneddu said: https://swcdn.apple.com/content/downloads/01/20/012-30348-A_1HAAJLLRM8/s0tqhw5umezuw08jb2ojkolsqwi6d5zsyb/InstallAssistant.pkg Beta 3 link please? Link to comment Share on other sites More sharing options...
Guest ricoc90 Posted July 9, 2022 Share Posted July 9, 2022 3 minutes ago, ruslan61 said: Beta 3 link please? Is not published yet Link to comment Share on other sites More sharing options...
Recommended Posts