Jump to content
fantomas1

Nvidia Web Driver updates for El Capitan (UPDATE 07/11/2018)

724 posts in this topic

Recommended Posts

hi people   :)
 

you can use this thread to link / talk about of the future Nvidia Web Driver updates for El Capitan

 

10.11.6

Nvidia Web Driver - 346.03.15f16 --> build 15G22010 (thanks to BreBoNew!

Nvidia Web Driver - 346.03.15f15 --> build 15G21013 (thanks to BreBo

Nvidia Web Driver - 346.03.15f14 --> build 15G20015 (thanks to DMCrimson)

Nvidia Web Driver - 346.03.15f13 --> build 15G20015 (thanks to Louvier)

Nvidia Web Driver - 346.03.15f12 --> build 15G19009 (thanks to WeBeRiO)

Nvidia Web Driver - 346.03.15f11 --> build 15G18013 (thanks to BreBo)

Nvidia Web Driver - 346.03.15f10 --> build 15G17023 (thanks to Badruzeus)

Nvidia Web Driver - 346.03.15f09 --> build 15G1611 (thanks to Badruzeus)

Nvidia Web Driver - 346.03.15f08 --> build 15G1510 (thanks to Badruzeus)

Nvidia Web Driver - 346.03.15f07 --> build 15G1421 (thanks to bb1045)

Nvidia Web Driver - 346.03.15f06 --> build 15G1217 (thanks to bb1045)

Nvidia Web Driver - 346.03.15f05 --> build 15G1212 (thanks to WeBeRiO)

Nvidia Web Driver - 346.03.15f04 --> build 15G1108 (see this post)

Nvidia Web Driver - 346.03.15f03 --> build 15G1004 (thanks to BreBo)

Nvidia Web Driver - 346.03.15f02 --> build 15G31 (thanks to Moviemakergr)

Nvidia Web Driver - 346.03.15f01 --> build 15G31 (thanks to WeBeRiO)

[uPDATE_3]Nvidia Web Driver - 346.03.15b01 --> build 15G24b (thanks to DMCrimson)


 

10.11.5

Nvidia Web Driver - 346.03.10f02 --> build 15F34 (thanks to marcozardi)

Nvidia Web Driver - 346.03.10f01 --> build 15F34 (thanks to WeBeRiO)

[uPDATE_2] Nvidia Web Driver - 346.03.10b01 --> build 15F31a (see this post)


 

10.11.4

Nvidia Web Driver - 346.03.06f01 --> build 15E65 (see this post)

Nvidia Web Driver - 346.03.06b01 --> build 15E (see this post)


 

10.11.3

Nvidia Web Driver - 346.03.05f02 --> second release for build 15D21 (thanks to Fljagd)

Nvidia Web Driver - 346.03.05f01  --> build 15D21 (see this post)

Nvidia Web Driver - 346.03.05b02 --> build 15D (see this post)


 

10.11.2

Nvidia Web Driver - 346.03.04f02 --> second public release (see this post)

Nvidia Web Driver - 346.03.04f01 --> build 15C50 (see this post)  

Nvidia Web Driver - 346.03.04b02 --> build 15C48a (see this post

Nvidia Web Driver - 346.03.04b01 --> build 15C47a (see this post)


 

10.11.1

Nvidia Web Driver - 346.03.03f02 --> second public release (see this post

Nvidia Web Driver - 346.03.03f01 --> build 15B42 (thanks to jperkins909)


 

10.11.0

Nvidia Web Driver - 346.03.02f02 --> build 15A284 (thanks to MTWomg)

Nvidia Web Driver - 346.03.02f01 --> build 15A284 (see this post)


 

DP

Nvidia Web Driver - 346.03.01b07 --> GM/DB/PB6/DB7/PB5 (thanks to BreBo

Nvidia Web Driver - 346.03.01b06 --> build 15A (thanks to MTWomg

Edited by fantomas1
added Nvidia Web Driver - 346.03.15f16 for 10.11.6 build 15G22010

Share this post


Link to post
Share on other sites
Advertisement

I would so much rather the built-in drivers support Maxwell.  My guess is that, at least for now, they don't.  

 

They don't. I tried.

Share this post


Link to post
Share on other sites

They don't. I tried.

 

That's a pity.

By the way, since you also own a Maxweill GPU, can you confirm that you sometimes see scrambled images within Safari ?

I just got a Titan X, and I am facing this strange issue, mostly using Safari.

Share this post


Link to post
Share on other sites

That's a pity.

By the way, since you also own a Maxweill GPU, can you confirm that you sometimes see scrambled images within Safari ?

I just got a Titan X, and I am facing this strange issue, mostly using Safari.

 

I don't use Safari, don't know. I used it today for the Apple stream, no problems here.

Share this post


Link to post
Share on other sites

I would so much rather the built-in drivers support Maxwell.  My guess is that, at least for now, they don't.  

Not until Apple starts to use Maxwell GPU in the Mac.

Share this post


Link to post
Share on other sites

That's a pity.

By the way, since you also own a Maxweill GPU, can you confirm that you sometimes see scrambled images within Safari ?

I just got a Titan X, and I am facing this strange issue, mostly using Safari.

 

I can confirm that, and it has been reported by many others on a couple forums without a fix. 

Share this post


Link to post
Share on other sites

With my GTX980 and using nv_disable=1 install very well.

Not graphic aceleration by the moment without webdriver, no?

Reguards.-

Share this post


Link to post
Share on other sites

hi people   :)

 

you can use this thread to link / talk about of the futur Nvidia Web Driver updates for El Capitan

 

 

DP

In my Asus Z77 & Z87 MB both Nvidia GTX 680 & GTX 780 working with native Nvidia kexts in 10.11 beta.

Even HDMI audio is also working too.

However GTX 980 not working at all.

Only bootable by nv_disable=1.

Hope Nvidia Web Driver for 10.11 update as soon as possible !

Share this post


Link to post
Share on other sites

In my Asus Z77 & Z87 MB both Nvidia GTX 680 & GTX 780 working with native Nvidia kexts in 10.11 beta.

Even HDMI audio is also working too.

However GTX 980 not working at all.

Only bootable by nv_disable=1.

Hope Nvidia Web Driver for 10.11 update as soon as possible !

Meaning Full QE/CI?

 

On my Z87X-UD5H recognize my GTX 760 (Correct name & MBs) but no GPU BIOS Info in System Report & no QE/CI

Share this post


Link to post
Share on other sites

Knock it off. The only reason this thread should be bumped is to post links to the drivers if/when they come out.

Share this post


Link to post
Share on other sites

sorry for this off-topic but some people could find this info helpful

 

for all people with GTX570 and device-id 0x108610de, you don't have to wait for the first beta of Nvidia WebDriver for El Capitan... you can get this card work in El Capitan (guess with previous versions too) with FakeID - 0x108110de

 

iMac-de-fantomas1:~ fantomas1$ kextstat |grep NVDA

   68    2 0xffffff7f80f63000 0x283000   0x283000   com.apple.nvidia.driver.NVDAResman (10.0.6) 14B636BC-3AFD-3039-9941-5FAEED135628

   69    0 0xffffff7f811f1000 0x1d1000   0x1d1000   com.apple.nvidia.driver.NVDAGF100Hal (10.0.6) 13324517-226D-37EA-BB8B-13D5C8478E6A

 

756928GTX570FakeIDElCapitan.png

 

 

 

 

Share this post


Link to post
Share on other sites

Working well with rootless=0 and kext-dev-mode=1. Additionally for some users out there, Dell UP2715k 5k monitor sleeps and wakes successfully! Been waiting for that for a while!

Share this post


Link to post
Share on other sites

Could anyone running a Maxwell GPU on El Capitan do a quick test for me ?

 

I was having some troubles rendering very specific images in Safari and/or Preview with Yosemite...

...and I don't have a Maxwell GPU available to re-do the test right now.

 

If you could do this on your machine (simply opening a PDF and share the screenshot), it would be highly appreciated :)

Share this post


Link to post
Share on other sites

Could anyone running a Maxwell GPU on El Capitan do a quick test for me ?

 

I was having some troubles rendering very specific images in Safari and/or Preview with Yosemite...

...and I don't have a Maxwell GPU available to re-do the test right now.

 

If you could do this on your machine (simply opening a PDF and share the screenshot), it would be highly appreciated :)

Hai MinusZwei i have a screenshot, take a look 

post-1311960-0-86463400-1437699159_thumb.png

Share this post


Link to post
Share on other sites

im trying to get the mis 970 4g working in el capitan 15A178w but all time fails i try all nvda_drv=1 don't works with the driver versions and i can't get it on without put nv_disable=1  any tuto to get 970 working ? i got clover 

 

edit: now i install the updates from App Store of el capitan and i can get nvidia web drivers on and full graphics acceleration but i restarts at 3er restart i can enter in OS X system im noob creating clover config :( 

Share this post


Link to post
Share on other sites

im trying to get the mis 970 4g working in el capitan 15A178w but all time fails i try all nvda_drv=1 don't works with the driver versions and i can't get it on without put nv_disable=1  any tuto to get 970 working ? i got clover 

 

edit: now i install the updates from App Store of el capitan and i can get nvidia web drivers on and full graphics acceleration but i restarts at 3er restart i can enter in OS X system im noob creating clover config :(

Maybe you should update your system,, get beta 3 or beta 4 from App Store and then try nvidia web driver. Sorry for my bad english

Share this post


Link to post
Share on other sites

Maybe you should update your system,, get beta 3 or beta 4 from App Store and then try nvidia web driver. Sorry for my bad english

yeah now works  update to last beta and all ok np for english my english is bad too don't worry and thanks you get the solution 

 

other more question any of here get hwmonitor temps with i7 4790k and gtx 970  in el capitan i only can get the cpu temps but the gpu i can't :(

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By fusion71au
      Run Vanilla OS X El Capitan, Sierra, High Sierra or Mojave in VMware Workstation on a Windows Host
       
      I wanted to make a simple guide on how to create a vanilla OS X El Capitan virtual machine running on a Windows host.  The virtual machine should be useful for testing El Capitan and also for creating installers for use on a real machine/hackintosh.
       
      There are many guides and videos on the net about running OS X on Windows machines using pre-made VMWare disk images but you can never guarantee what else is in there….
       
      I’ve gathered info for this guide from various threads in the Multibooting and Virtualisation section of this forum eg
       
      Workstation 11/12, Player 7/12, Fusion 7/8 and ESXi 6 Mac OS X Unlocker 2 by @Donk How to Install OS X 10.x from Snow Leopard to El Capitan in VMware Workstation 10/12, Player 6/8 or ESXi 5/6 by @MSOK HOW TO: Create a bootable El Capitan ISO for VMware Credit and thanks to @Donk, @Albert Nietsnie and @MSOK for all their hard work in creating and testing the VMware Unlocker program.
       
      Requirements
      Intel PC with four or more CPU cores running Windows 7 X64 or later OS (2 or more cores needed for OS X) 4GB or more RAM (2GB or more will be needed for OS X) Hard Disk with at least 40GB free for Virtual Machine VMware Workstation 12 or later VMware Unlocker 2.0.7 or later Install OS X El Capitan app and Mac or Hack to prepare installation iso <-- Now, no longer necessary to have previous access to a Mac or Hack by building the Installer.app from scratch - see post#41 16GB or larger exFAT formatted USB stick to transfer El Capitan iso from Mac/Hack to Host PC Prepare Installation ISO on your Mac or Hack
      1.  On your Mac or Hack, download "Install OS X El Capitan.app" from the App Store into your Applications folder.
      2.  Unmount any attached install image/InstallESD.dmg (if currently mounted) by rebooting the system or running the hdiutil unmount command in terminal eg
       
      3.  Download and unzip the CECI.tool (attached to this post) into your ~/Downloads folder. The commands in this executable script are shown below for informational purposes….
       
       
       
      4.  Open OS X terminal, then run the following commands to execute the script:
      cd downloads chmod +x CECI.tool ./CECI.tool 5.  At the end of the process, you will have an El Capitan iso on your desktop - copy this onto an exFAT formatted USB for use on the PC Host later.
       
      Update: @shela has created an ISO generating script compatible with OS X 10.6-10.12: create_osx_iso post #362.
       
      Install and Patch VMware Workstation 12 on your PC
      1.  Download and install VMWare Workstation Player 12 or later
      2.  Download and extract Unlocker 2.0.7 or later to your USB stick…
      3.  Run the win-install.cmd as administrator by right clicking the file in Windows explorer or run it from an Administrative Command Prompt.
       



       
      Create an El Capitan Virtual Machine
      1.  Double click on the VMware Workstation 12 Player icon on your desktop and click “Create a New Virtual Machine”.  Choose “I will install the operating system later” at the How will you install screen….
       

      2.  Select Apple Mac OS X as the Guest operating system and OS X 10.11 as the version.  By default, an OS X 10.11 folder will be created in your Documents\Virtual Machines folder.
       


      3.  Under Specify Disk Capacity, you can leave the default 40GB or set a larger value.  I personally store the virtual disk as a single file.  Click Finish and you will see OS X 10.11 on the Main Screen of Workstation 12.
       


      4.  Next, we need to edit the virtual machine settings to map the virtual SATA CD/DVD drive to the El Capitan installation iso we created earlier.
       


       
      5.  To prevent the virtual machine from crashing in Windows, the virtualHW.version set in the vmx configuration file needs to be changed from 12 to 10 (alternatively, the line smc.version = "0" can be added to the file).  The OS X 10.11.vmx file can be edited with the WordPad program (navigate to the OS X 10.11 virtual machine folder with Windows Explorer and right click on the file to open in WordPad).
       


       
      6.  For HW10, set USB compatibility to USB 2.0, otherwise your mouse and keyboard might not work in the virtual machine.
       

      7.  Finally click “Play virtual machine”
       

      Installation of El Capitan
      Installation should be relatively straight forward, just following the prompts of the OS X installer:
      1.  Select language, agree to legal terms
       

      2.  Use Disk Utility from the Utilities Menu to erase and format the virtual hard drive as a single partition GUID Mac OS X Extended.  I’ve named the drive Macintosh HD but you can enter whatever you like eg El_Capitan.
       



      3.  Quit DU and choose Macintosh HD to install El Capitan on.
       

      4.  After 20-30 min (depending on how fast your system is), the installation will complete and the VM will automatically reboot…
       

      5.  At the welcome screen, choose your country and keyboard layout.  You can skip transfer information, location services and logging in with your Apple ID if you wish…
       


      6.  Create a User Account and select your Time Zone.  You can skip sending diagnostics and usage data to Apple….
       


      7.  Finally, you will arrive at the El Capitan Desktop.  You should eject the Installation iso now by right clicking and selecting “Eject OS X Base System”.  This will allow you to install VMware Tools….
       



      8.  After rebooting, the VM can now be resized or run at full screen resolution.  Audio and network/internet should also work OOB.
       

       
      SMBIOS Customization and iMessage Vars
      To make the Virtual Machine more "Mac like", you can edit the vmx file to add unique identifiers from a real Mac's SMBIOS -
      eg for an iMac 11,3 SMBIOS, you can enter the following lines....
      smbios.reflectHost = "FALSE" board-id.reflectHost = "FALSE" board-id = "Mac-F2238BAE" hw.model.reflectHost = "FALSE" hw.model = "iMac11,3" serialNumber.reflectHost = "FALSE" serialNumber = "W80#######6" Refer How to spoof real Mac in VMware - Multi-booting and Virtualisation.
       
      The critical variables for iMessage/Facetime activation are MLB & ROM.  By default, VMware "reflects" the host's MLB and ROM since it assumes you are running the OSX guest on a real Mac host - see post#42 by @Donk.
       
      If the host is a Windows PC, the following lines need to be added to the vmx file (requires virtualHW.version 12 and smc.version = "0")....
      efi.nvram.var.ROM.reflectHost = "FALSE" efi.nvram.var.MLB.reflectHost = "FALSE" system-id.enable = "TRUE" and the MLB, ROM and optionally system-id entered manually eg
      efi.nvram.var.MLB = "W80######BA1A" (MLB can be 13 or 17 characters long, alphanumeric string) efi.nvram.var.ROM = "<=>?@A" (ROM is entered here as a 6 character ASCII string) uuid.bios = "## ## ## ## ## ## ## ##-## ## ## ## ## ## ## ##" <---Optional (if you want to inject a given system-id hexadecimal value) Note the output for ROM from imessage_debug is a 12 character hexadecimal that needs to be entered here as a 6 character ASCII string eg using an Hex to ASCII converter we find that "3c3d3e3f4041" hex is equivalent to   "<=>?@A".
       
      Vanilla Mavericks and Yosemite
      The same VM settings for El Capitan will also boot and run vanilla installations of OS X Mavericks and Yosemite .  Attached to this post are installer scripts to create bootable Mavericks (CMI.tool) and Yosemite (CYI.tool) ISOs for VirtualBox and VMware.
       
      With the respective OS X installer apps in the Applications folder, download and run the installer tools using terminal ie
       
      To create a Mavericks ISO on your desktop
      cd downloads chmod +x CMI.tool ./CMI.tool To create a Yosemite ISO on your desktop
      cd downloads chmod +x CYI.tool ./CYI.tool Here is a screenshot of the VM running Mavericks 10.9.5...
       

       
      Enjoy
       
      Update for macOS 10.12 Sierra
      The above settings still work for macOS Sierra after upgrading to VMware Workstation 12.5 and unlocker 2.0.8 - see post #13.
       
      Update for macOS 10.13 High Sierra and 10.14 Mojave
      See post#30
      Post#41 describes how to build "Install macOS ******.app" on the fly from installer files downloaded beforehand in /SharedSupport folder.
       
       
      CECI.zip
      CYI.tool.zip
      CMI.tool.zip
    • By gengik84
      Ciro82==>>Thanks
      Uno dei tre Requisiti:
      Hack funzionante Mac vero Macchina virtuale Impostazioni Bios per il boot:
      Cercate una voce  del tipo “Sata Mode”e settatela  in AHCI
      Secure Boot: disabilitare o altri sistemi operativi
      CSM: UEFI o LEGACY, oppure a secondo del tipo di installazione
      VT-x / VT-d disable
      *Nota: Secure boot e csm valido solo per bios UEFI
      Materiale Occorrente 
      "OS X (Versione App.Store)”
      USB 8GB  *nota: nel caso di usb superiori dovrà essere partizionata, in modo da avere una partizione su cui "lavoreremo,di questa dimensione
      ShowAllfiles 
      kext Wizard 
      Bootloader Clover_2.3k_r xxx:                   http: //sourceforge.n.../cloverefiboot/
      Clover Configurator:                                    http: //mackie100proj...a.org/download/
      FakeSmc.kext:                                            https://github.com/kozlek/HWSensors/releases
      In allegato,a fondo pagina troverete un "pacchetto" contenente : ShowAllfiles, Kext Wizard, FakeSmc.kext: 
      App alternative:
      ESP Mounter Pro: per montare la partizione EFI
      Vi illustrerò tre metodi per creare la usb, ma sono ben distinti… quindi usatene soltanto uno
      Metodo 1: “Install Mac_OS_X.command” Metodo 2: “Create Install Media di Apple” Metodo 3:  Metodo Manuale Alla fine delle preparazione dell’installer, tutti i metodi necessitano l’installazione del Bootloader Clover sulla a vostra USB.
      “CONDIZIONI OBBLIGATORIE”
      PUNTO 1: che la vostra usb sia stata preventivamente nominata USB (caratteri maiuscoli) Tabella di partizione GUID e la formattazione in  Mac esteso Journaled.
      PUNTO 2: che l’installer di OSX si trovi in Applicazioni
      Utility Disco 
      Selezionate la pendrive, andate su “partizione”, selezionate “1 partizione”, impostate Mac OS esteso journaled e date il nome USB, poi in basso cliccate su opzioni e scegliete Tabella partizione (GUID), poi “applica”.
      Immagine 
      Riporto nuovamente l’operazione sopra citata adoperando dal nuovo Utility Disco introdotto su El Capitan.
      Rimane ovviamente invariato nome della usb in ==>> USB (maiuscolo), la formattazione in Mac esteso Journaled e sia la mappa partizione in GUID
      Da utility disco selezionate la usb, cliccate su inizializza.
      dal menù a tendina scegliete la relative impostazioni
      Immagine  
      Procedura effettua da High Sierra è la stessa della precedente, l'unica attenzione e operazione da aggiungere in primis  è cliccare nel menù a tendina in alto sulla sinistra di utility disco e selezionare "mostra tutti i dispositivi"
      Immagine 
       
      =====================
        METODO 1: "Install_Mac_OS_X.Command" Lo script che trovate allegato in fondo alla guida permette la creazione dell’installer in maniera automatica
      Include la possibilità di scelta di tre versioni di osx
      Yosemite El Capitan Sierra Il risultato finale è come quello del metodo "manuale" descritto nella guida, per cui l'installazione avverrà in un solo passaggio, non in due come con il metodo createinstallmedia. 
      Offre inoltre la possibilità di inserire un kernel patchato, utile, per esempio, per chi usa AMD.
      Rimane invariato il nome dato alla usb in USB, mappa partizione e tipo di formattazione
      Se la vostra usb non sarà rinominata nel modo corretto, verrete avvisati dal terminale, quindi non dovrete far altro che apportare la relativa modifica e rilanciare nuovamente lo script
      Esempio
      ===========================
      Metodo 2 
      L'intento è quello di usare la procedura fornitaci direttamente da Apple, "createinstallmedia", introdotta  con Mavericks. 
      Tale metodo prevede l’uso del terminale che via via se ne sta perdendo il “valore e l’uso”
      Inizialmente per i neofiti potrà sembrare problematico ma alla fine non è così.
      Durante il post installazione alcune operazioni ne richiedono l’ uso.
      Perciò mi sono chiesto perchè, qualora uno volesse, non far conoscere da subito un po’ questo “strumento”???
      Per favorirvi vi ho allegato i comandi già  “pronti”, i quali li potrete copiare ed incollare sul terminale.
      A questo punto aprite il terminale, copiate ed incollate il comando sottostante e premete invio, digitate la vostra password e premete nuovamente invio.
      Comando per creare USB con Yosemite:
      sudo /Applications/Install\ OS\ X\ Yosemite.app/Contents/Resources/createinstallmedia --volume /Volumes/USB --applicationpath /Applications/Install\ OS\ X\ Yosemite.app --nointeraction  
      Comando per creare USB con El Capitan
      sudo /Applications/Install\ OS\ X\ El\ Capitan.app/Contents/Resources/createinstallmedia --volume /Volumes/USB --applicationpath /Applications/Install\ OS\ X\ El\ Capitan.app --nointeraction Comando per creare USB con Sierra 
      sudo /Applications/Install\ macOS\ Sierra.app/Contents/Resources/createinstallmedia --volume /Volumes/USB --applicationpath /Applications/Install\ macOS\ Sierra.app/ --nointeraction Per creare USB con Hight Sierra o Mojave usate --> C_I_M (aggiornato per 10.14)
       
      Funziona con il drag & drop sul terminale, in questo caso non vi è necessità che la usb sia nominata in un determinato modo ed essendo basato su create install media ovviamente funziona da 10.9 a 10.14.... 
      BENE…IL PROCESSO DI CREAZIONE E’ INIZIATO…
      AVREMO CIRCA 20/30 MINUTI DI TEMPO LIBERO A CUI DEDICARSI A CIO’ CHE VOGLIAMO………………………………………..  
      COLGO L’OCCASIONE PER FARVI NOTARE LA VELOCITA’ E LA SICUREZZA DI QUESTO METODO
      CONFRONTATE QUESTO CON IL TERZO METODO E NOTERETE CHE CON UN SOLO PASSAGGIO, OSSIA IL COMANDO DATO AL TERMINALE, FACCIAMO IN UNA SINGOLA OPERAZIONE TUTTI I VARI STEP DESCRITTI SULL’ ALTRO METODO.
      DETTO QUESTO, MOLTO IMPORTANTE E’ SOTTOLINEARE CHE COSI’ FACENDO EVITEREMO ERRORI  DI DISTRAZIONE RIGUARDO AI PASSAGGI O FRAINTENDIMENTI.
      Immagine 
      Potete adesso passare ad installare il bootloader Clover sulla vostra usb.
      *NOTA*:
      Avendo usato questo metodo l'installazione si dividerà in due fasi, perciò dopo il primo riavvio e necessario far partire nuovamente l'installer, selezionare lo stesso disco senza formattarlo.
      Finita questa ulteriore fase , l'installazione sarà terminata
      =========================
      METODO "MANUALE"....  (lascio per futura memoria-Compatibile fino a 10.12)
      ==========================
      Bootloader
      **Nota:** Installazione in UEFI  dipenderà dalla scheda madre in vostro possesso, quindi se non supporta tale opzione , il bootloader dovrà essere installato in  modalità Legacy.
       Vi invito, qualora non sapeste questa informazione, a recarvi nel sito ufficiale del produttore e controllare le informazioni a riguardo
      Fatto questo dobbiamo installare  Clover sulla usb.
      A seconda del tipo di Bios o al tipo di installazione che vogliamo fare UEFI o Legacy avremo ovviamente configurazioni diverse in questa fase.
      Lanciate il pkg.
      Immagine 

       
      Cambiate la destinazione di installazione ad USB oppure Install Mac_OS_X (a secondo del tipo di creazione eseguita)
      Successivamente clicchiamo su "Ad Hoc"
      Per Installazione UEFI
      Mettete i flag   : Installazione solo per avvio UEFI
                               : installare Clover nella ESP
                               : Driver64UEFI  selezionate OsxAptioFixDrv-64
                             *  :Se nel vostro sistema è presente una scheda grafica (discreta) della serie 9xx nVidia selezionate OsxAptioFix2Drv-64 al posto di  OsxAptioFixDrv-64 *
      ** OsxAptioFix2Drv :E' necessario per poter impostare CsrActiveConfig= 0x3 **
      ***OsxAptioFix3Drv oppure AptioMemory --> (consigliato) devono essere usati su hardware Skylake o successivi perché permettono alla nvram di lavorare correttamente
           (mi raccomando o uno o l'altro)
      Proseguite con l’installazione.
      Immagine 
      ** Ricordate che avrete accesso a questa cartella dopo aver montato la partizione EFI**
      ===========================
      Per installazione Legacy
      Immagine 
      ===========================
      Impostazione per config.plist:
      Con clover configurator “montate” la partizione EFI della usb.
      1) Per fare questo nel menù di sinistra, cliccate su “Mount EFI”
      2) individuate la partizione relativa alla vostra usb, a questo punto montiamo la relativa partizione EFI  selezionando l’apposito pulsante “Mount Partition”
      Immagine 
      3) Successivamente cliccate su “Open Partition”.. recatevi in EFI/Clover ed aprite il config.plist
      4) Sezione ACPI: Disabilitate tutti i fix sia del menù 1 che del menù 2
      Immagine 
      5) Sezione BOOT: Sole se si sta installando Yosemite mettete il flag su kext-dev-mode=1
      Immagine 
      6) Sezione RT Variables: Se si sta installando El Capitan oppure Sierra, aggiungere i valori: BooterConfig= 0x28, CsrActiveConfig= 0x67
      Immagine 
      7) Sezione System Parameters: Su inject kext mettete YES
      Immagine 
      ===========================
      Nota: Su El Capitan, è stato introdotto SIP (System Integrity Protection)
      Info:
      ===========================
      Recatevi in EFI/Clover/kext/10.x 
      X= alla versione di osx che state installando. Per esempio se installerete Yosemite dovrete recarvi nella cartella 10.10, con El Capitan in 10.11….ecc
      Se non ci fosse tale cartella, createla e nominatela voi a “modo”.
      Copiatevi all’interno FakeSmc.kext
      *Nota se venite già da altre vostre configurazioni, oltre kext sopra citato ,potete mettere gli altri necessari per il vostro hardware
      Stessa cosa se avete DSDT e/o SSDT potete copiarli in EFI/Clover/Acpi/Patched
      Immagine 
      
      Per High Sierra:
      Scaricare il driver apfs.efi a fine guida, collocarlo:
          --> EFI/clover/Driver64UEFI se stiamo usando UEFI
      --> EFI/Clover/Driver64 se stiamo usando Legacy
       
      Per chi volesse continuare ad usare HFS vi rimando a questo post:
        Come installare High Sierra in HFS direttamente dalla usb  
      Utenti Laptop:  Nel 99% è obbligatorio disattivare la grafica discreta Nvidia/Amd per installare questo nuovo osx
                                     Quindi aggiungete --> SSDT-Disable_DGPU.aml.zip
                                     in EFI/Clover/acpi/Patched della usb
      --------------------------------------------------------------------
      Per Mojave:
      Scaricare il driver apfs.efi per 10.14 a fine guida, collocarlo:
          --> EFI/clover/Driver64UEFI se stiamo usando UEFI
      --> EFI/Clover/Driver64 se stiamo usando Legacy
      Versione di clover non antecedente a V_4015
      Volete usare HFS?
      E' possibile fare un installazione diretta su altro disco o partizione, nel caso può essere usato anche per effettuare aggiornamenti...
      nel caso guardate...
       Mojave in HFS 
       
       
       
      Fatto questo avrete la vostra USB bootable per installare OSX.
      ………Non scordatevi Fakesmc.kext da mettere nella relativa cartella…. senza il quale non farete mai il Boot......
      *NOTA: se usato il terminale per la creazione della usb, l'installazione si dividerà in due fasi, perciò dopo il primo riavvio e necessario far partire nuovamente l'installer, selezionare lo stesso disco senza formattarlo.
      Finita questa ulteriore fase , l'installazione sarà terminata
      **NOTA** Se avete processori Broadwell,Skylake o Kabylake...usate FakeSmc.kext e relativi sensors che trovate all'interno del secondo pacchetto.. (potete usarlo anche sui precedenti senza problemi, essendo una versione più aggiornata ha ulteriore supporto per le cpu più recenti)
      Update: Fakesmc e sensors versione 6.26
      Post installazione... post #2           
       Buon Hack….. 
      Aggiornamento:Install_Mac_OS_X.command.zip (compatibile da 10.10 a 10.12)
      le info le trovate a questo post
      Ringrazio @Ciro82 che mi ha aiutato nel preparare questa guida.
      Pacchetto.zip
      Pacchetto-2.zip
      apfs.efi-10.13-NoLog.zip
      Pacchetto-Fake+Sensors 6.26.1440.zip
      apfs.efi-10.13.1-No_LOG.zip
      apfs.efi-10.13.2_No_Log.zip
      apfs.efi-10.13.3-No_Log.zip
      apfs.efi-10.13.4-No_Log.zip
      apfs.efi-10.13.5_No_Log.zip
      C_I_M.zip
       
      apfs.efi-10.14-beta1_No_Log.zip






    • By WarDoc
      This Post is for helping users with issue that come with Whatevergreen

      Feel free to join in and help users if you know your stuff
      also get the dev's of whatever green to join as well


      Whatevergreen has a few issues

      Multi-monitor Support is lacking as 2 monitors seems to be the limit for some even if the devs say it's not users say it's true

      Some Id's are wrong or missing (hence the nano and 390X not working)

      some GPU names are wrong ( which has been reported many times)

      FOR RYZEN OWNERS with Polaris :
      Modified kext:/S/L/E/AMD9510Controller.kext//Contents/Info.plistfrom:<key>IOPCIMatch</key><string>0x67EF1002</string>to:<key>IOPCIMatch</key><string>0x67FF1002</string> Updating clover to Clover_v2.4k_r4152 and using the config.plist here https://pastebin.com/TYiTEVcMwithbusratio=36 and npci=0x3000 ALSO THIS THREAD IS NOT FOR WHINING in anyway please do not post off topic if you don't like given support in this forum that's all you but majority of use need it.
       
      Source code: repository. FAQ and documentation: link.  
      a real SSDT example https://www.dropbox.com/sh/el66izg1lmk1jiu/AADCZUEjyQyiWWELlmzW2ix-a?dl=0 Credits to Pavo for the hard work of decoding the mess
      Boot argumentsAdd -raddbg to enable debug printing (available in DEBUG binaries).Add -radvesa to disable ATI/AMD video acceleration completely.Add -radoff to disable WhateverGreen.Add -radbeta to enable WhateverGreen on unsupported os versions (10.13 and below are enabled by default).Add -rad24 to enforce 24-bit display mode.Add -radlogo to patch boot logo distortion.Add -raddvi to enable DVI transmitter correction (required for 290X, 370, etc.)Add radpg=15 to disable several power-gating modes (see FAQ, required for 7xxx GPUs). If you Don't Want To use WEG or LILU clover 4297 has a new patch that fixes the same issues without kexts 
      You have to set in config.plist <key>Graphics</key> <dict> <key>RadeonDeInit</key> <true/>
    • By fusion71au
      This is a brief guide on how to create a vanilla El Capitan (also same process for Sierra) OS X Installer USB with an updated prelinked kernel containing FakeSMC.

      It is tailored for those users who want to understand the “nuts and bolts” of how to create an installer and also to help brush up on their terminal skills (rather than have one made for them with the numerous automated “tools” available or even Apple’s createinstallmedia) :
       
       
      Specifically, it is also a “Proof of Concept” which shows that installation is possible without even having to rely on boot loader kext injection.

      Prerequisites
      Existing Yosemite installation (or Mavericks - see post#4 for steps 7,8) “Install OS X El Capitan.app" downloaded to the Applications folder Pacifist FakeSMC.kext - Slice or Kozlek branch Bootloader - Clover or Chameleon 8GB or larger USB drive (16GB recommended), formatted HFS+ (MBR or GUID) named “Installer”  
      Procedure
      1.  Boot into Yosemite with the kext-dev-mode=1 boot flag
      2.  Open OS X terminal and type the following lines, followed by <Enter> after each line.
          The image restore and file copying may take a while to complete, and at the end of the process, the Installer volume is renamed to “OS X Base System"....
       
      sudo -s hdiutil attach /Applications/Install\ OS\ X\ El\ Capitan.app/Contents/SharedSupport/InstallESD.dmg asr restore -source /Volumes/OS\ X\ Install\ ESD/BaseSystem.dmg  -target /Volumes/Installer -erase -format HFS+ -noprompt -noverify rm /Volumes/OS\ X\ Base\ System/System/Installation/Packages cp -av /Volumes/OS\ X\ Install\ ESD/Packages /Volumes/OS\ X\ Base\ System/System/Installation cp -av /Volumes/OS\ X\ Install\ ESD/BaseSystem.dmg /Volumes/OS\ X\ Install\ ESD/BaseSystem.chunklist /Volumes/OS\ X\ Base\ System diskutil unmount /Volumes/OS\ X\ Install\ ESD exit 3.  Right click on the “OS X Base System” Volume and click “Get Info”
       

      4.  Click on the lock icon and untick “Ignore ownership on this volume”
       

      5.  Extract/Copy the El Capitan Kernels folder into /System/Library/ of the USB with Pacifist.  NB It is found in the "Essentials.pkg" in /System/Installation/Packages
       

      6.  Delete or Rename the original /System/Library/PrelinkedKernels/prelinkedkernel —> OG.prelinkedkernel
       

      7.  Copy FakeSMC.kext and other necessary kexts (e.g. VoodooPS2Controller.kext for laptops) into the /Library/Extensions folder of the installer USB using Finder.
       

      8.  Back in terminal, type the following lines, followed by <Enter> after each line to rebuild the prelinkedkernel…..
       
      sudo -s chmod -R 755 /Volumes/OS\ X\ Base\ System/Library/Extensions chown -R 0:0 /Volumes/OS\ X\ Base\ System/Library/Extensions touch /Volumes/OS\ X\ Base\ System/System/Library/Extensions kextcache -u /Volumes/OS\ X\ Base\ System exit Any errors should be noted but the output below is normal e.g.


      9. Install your Bootloader targeting the OS X Base System volume
       
       
       
       
      10.  Boot your system with the USB without injected kexts into the OS X Installer GUI....
       
       
       
       
       
      Post Install
      The original prelinked kernel in a fresh install of El Capitan will also lack FakeSMC ie it will only be linked to Apple signed kexts.  In order to boot into El Capitan the first time around without boot loader kext injection, the PLK needs to be rebuilt for the El Capitan volume like we did for the installer:
       
      1.  Boot into Yosemite with the kext-dev-mode=1 boot flag
      2.  Delete or Rename the original /System/Library/PrelinkedKernels/prelinkedkernel for the El Capitan volume —> OG.prelinkedkernel
      3.  Copy FakeSMC.kext and other necessary kexts (e.g. VoodooPS2Controller.kext for laptops) into the /Library/Extensions folder of El Capitan using Finder
      4.  Back in terminal, type the following lines, followed by <Enter> after each line to rebuild the prelinkedkernel.  In this example, the El Capitan volume is named "El_Capitan" - change if you have named it something else...
      sudo -s chmod -R 755 /Volumes/El_Capitan/Library/Extensions chown -R 0:0 /Volumes/El_Capitan/Library/Extensions touch /Volumes/El_Capitan/System/Library/Extensions kextcache -u /Volumes/El_Capitan exit 5. Install your Bootloader targeting the El Capitan volume.  This step is only necessary if you are installing El Capitan on a new drive without existing boot loader (not required if installing on a disk with existing boot loader beside Yosemite).
      6. Reboot your system without injected kexts into El Capitan!
       
       
      Other links
      The All-In-One Guide to Vanilla OS X for beginners
       
      Updates for Sierra and High Sierra   Custom Prelinkedkernel Generator Tool I have made a custom prelinkedkernel generator "PLK.tool" for Sierra + El Capitan.  Instructions:   1.  Download and extract the attached BaseSystem_PLK.tool.zip into your ~/Downloads folder.   2.  Copy any extra kexts necessary for booting your hack to ~/Downloads/BaseSystem/ExtraKexts (e.g. FakeSMC, VoodooPS2Controller), making sure SIP is disabled. 3.  Copy BaseSystem.dmg to ~/Downloads/BaseSystem  4.  Open terminal and run the following commands... cd ~/Downloads/BaseSystem chmod +x PLK.tool ./PLK.tool ---> supply your admin password ---> will place your new custom prelinkedkernel on the desktop.       macOS High Sierra bypass Firmware and MBR checks in post#13.
      BaseSystem_PLK.tool_ElCap.zip
      BaseSystem_PLK.tool_Sierra.zip
      BaseSystem_PLK.tool_Mojave.zip
    • By fantomas1
      Hi InsanelyMacaliens    
       
      Use this thread to link / talk about of the future Nvidia Web Driver updates for macOS High Sierra.
       
      10.13.6
      Nvidia Web Driver - 387.10.10.15.15.108 --> build 17G2307 (thanks to marcozardi)  New!
      Nvidia Web Driver - 387.10.10.10.40.105 --> build 17G65 (thanks to sl0wtarget)
       
      10.13.5
      Nvidia Web Driver - 387.10.10.10.35.106 --> build 17F77 (check here)
       
      10.13.4
      Nvidia Web Driver - 387.10.10.10.30.107 --> build 17E202 (check here)
      Nvidia Web Driver - 387.10.10.10.30.106 --> build 17E199 (thanks to BreBo)
      Nvidia Web Driver - 387.10.10.10.30.103 --> build 17E199 (thanks to ricoc90)
       
       
      10.13.3
      Nvidia Web Driver - 387.10.10.10.25.161 --> build 17D102 (thanks to Cyberdevs)
      Nvidia Web Driver - 387.10.10.10.25.160 --> build 17D2102 (thanks to Cyberdevs)
      Nvidia Web Driver - 387.10.10.10.25.159 --> build 17D2012 (thanks to cyberdevs)
      Nvidia Web Driver - 387.10.10.10.25.158 --> build 17D102 (thanks to cyberdevs)
      Nvidia Web Driver - 387.10.10.10.25.157 --> build 17D2047 (thanks to cyberdevs)
      Nvidia Web Driver - 387.10.10.10.25.156 --> build 17D47 (thanks to darthsian) 
       
       
      10.13.2
      Nvidia Web Driver - 378.10.10.10.25.106 --> build 17C2205 (thanks to KGP-X99)
      Nvidia Web Driver - 378.10.10.10.25.105 --> build 17C2120 (see this post)
      Nvidia Web Driver - 378.10.10.10.25.104 --> build 17C205 (thanks to ReddestDream)
      Nvidia Web Driver - 378.10.10.10.25.103 --> build 17C89 (thanks to Il Francy MacPc) 
      Nvidia Web Driver - 378.10.10.10.25.102 --> build 17C88 (thanks to piiggggg)
       
       
      10.13.1
      Nvidia Web Driver - 378.10.10.10.20.109 --> build 17B1003 (see this post)
      Nvidia Web Driver - 378.10.10.10.20.108 --> build 17B1002 (thanks to BreBo)
      Nvidia Web Driver -378.10.10.10.20.107 --> build 17B48 (thanks to piiggggg) 
       
       
      10.13.0
      Nvidia Web Driver - 378.10.10.10.15.121 --> build 17A405 (thanks to Asgorath)
      Nvidia Web Driver - 378.10.10.10.15.120 --> build 17A405 (thanks to phi777)
      Nvidia Web Driver - 378.10.10.10.15.117 --> build 17A405 (thanks to phi777)
      Nvidia Web Driver - 378.10.10.10.15.114 --> build 17A365 (thanks to Asgorath).
×