mikeutter Posted March 8, 2011 Share Posted March 8, 2011 hope help you, Boot Snow leopard: Coppy VodooPS2 and Nub2.... from Extra of Snow to System=> Library=> Extension of Lion and repair:Sudo -s chown -R 0:0 {drag Voodoops2 from S=>L=>E} enter chmod -R 755 {drag Voodoops2 from S=>L=>E}enter chown -R 0:0 {drag Nub2... from S=>L=>E} enter chmod -R 755 {drag Nub2... from S=>L=>E}enter Success I didn't understand what you meant by Nub2..kext but I solved the problem by voodoops2 and booting into 32-bit kernel via arch=i386 on [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]. Thank you very much for your reply. As for the slowness, once I disable the built-in wireless, Lion becomes tolerable. But I lose network connectivity hehe. Seeing I don't miss a lot, I am back to Snow Leopard :-) Link to comment Share on other sites More sharing options...
VampireMI2 Posted March 8, 2011 Share Posted March 8, 2011 i have successfully to install Lion on my EP35-DS3R. when i install lion finish i boot back to Snow leopard to install - install Chameleon 2 RC3 r658 to Lion - install boot from Netkas - add -v -usecache to com.apple.boot.plist in Extra - edit my DSDT.aml with Vanilla Speedstep (no need Disabler.kext) now i have com.apple.boot.plist and DSDT.aml in my Extra folder and then copy FakeSMC.kext and VoodooPS2.kext to Lion/S/L/E and then everything work very good, so i very happy with new Lion. Link to comment Share on other sites More sharing options...
farhanito Posted March 8, 2011 Share Posted March 8, 2011 I didn't understand what you meant by Nub2..kext but I solved the problem by voodoops2 and booting into 32-bit kernel via arch=i386 on [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]. Thank you very much for your reply. As for the slowness, once I disable the built-in wireless, Lion becomes tolerable. But I lose network connectivity hehe. Seeing I don't miss a lot, I am back to Snow Leopard :-) funny thing is i managed to get my trackpad to work, but not my keyboard can i have your voodoops2? Link to comment Share on other sites More sharing options...
asapreta Posted March 8, 2011 Share Posted March 8, 2011 anyone get working on P45 Chipset motherboard?i follow this guide http://www.insanelymac.com/forum/index.php?showtopic=250415 and http://www.insanelymac.com/forum/index.php...250104&st=0 no method is working my motherboard is P5Q-SE I got it running on my P45 Gigabyte board. GA-EP45-UD3R i have successfully to install Lion on my EP35-DS3R.when i install lion finish i boot back to Snow leopard to install - install Chameleon 2 RC3 r658 to Lion - install boot from Netkas - add -v -usecache to com.apple.boot.plist in Extra - edit my DSDT.aml with Vanilla Speedstep (no need Disabler.kext) now i have com.apple.boot.plist and DSDT.aml in my Extra folder and then copy FakeSMC.kext and VoodooPS2.kext to Lion/S/L/E and then everything work very good, so i very happy with new Lion. Where did you got the boot from NETKAS? I always get the double fault during chamaleon boot on Lion. Link to comment Share on other sites More sharing options...
VultUx Posted March 8, 2011 Share Posted March 8, 2011 I got it running on my P45 Gigabyte board. GA-EP45-UD3R Where did you got the boot from NETKAS? I always get the double fault during chamaleon boot on Lion. I think it is a ASUS motherboard problem, because I have a ASUS P6T and nothing of this methods work for me too. If someone is just curious about Lion, I found the link below with instructions of how to install on Vmware Fusion, runs very fast. http://www.obviouslogic.com:8080/solutions/lion-vmware/ Link to comment Share on other sites More sharing options...
VampireMI2 Posted March 8, 2011 Share Posted March 8, 2011 I got it running on my P45 Gigabyte board. GA-EP45-UD3R Where did you got the boot from NETKAS? I always get the double fault during chamaleon boot on Lion. Here you are. Lion_Bootloader.zip Link to comment Share on other sites More sharing options...
jmacie Posted March 8, 2011 Share Posted March 8, 2011 I think it is a ASUS motherboard problem, because I have a ASUS P6T and nothing of this methods work for me too. If someone is just curious about Lion, I found the link below with instructions of how to install on Vmware Fusion, runs very fast. http://www.obviouslogic.com:8080/solutions/lion-vmware/ On asus,you have to change serial port1 address in advanced tab/onboard devices config in bios to disable, or 3E8/IRQ4, then you can at least use [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url], no dsdt needed just fakesmc.kext in s/l/e. I still haven't been able to do netkes bootfile, I have to wait for someone to build one, it's too much trial and error. Link to comment Share on other sites More sharing options...
mikeutter Posted March 8, 2011 Share Posted March 8, 2011 funny thing is i managed to get my trackpad to work, but not my keyboard can i have your voodoops2? Here you go. I hope it works for you (now my USB mouse or any USB port is not working, lol) VoodooPS2Controller.kext.zip Link to comment Share on other sites More sharing options...
iiamoat Posted March 8, 2011 Share Posted March 8, 2011 I got it running on my P45 Gigabyte board. GA-EP45-UD3R i got double fault panic on chameleon RC3 XPC and [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] can't boot. maybe asus motherboard must be MOD BIOS like snow leopard Link to comment Share on other sites More sharing options...
dickhouse Posted March 8, 2011 Share Posted March 8, 2011 stuck on rainbow logo loading... now what? nothin happen Link to comment Share on other sites More sharing options...
thanh hoang Posted March 8, 2011 Share Posted March 8, 2011 i have successfully to install Lion on my EP35-DS3R.when i install lion finish i boot back to Snow leopard to install - install Chameleon 2 RC3 r658 to Lion - install boot from Netkas - add -v -usecache to com.apple.boot.plist in Extra - edit my DSDT.aml with Vanilla Speedstep (no need Disabler.kext) now i have com.apple.boot.plist and DSDT.aml in my Extra folder and then copy FakeSMC.kext and VoodooPS2.kext to Lion/S/L/E and then everything work very good, so i very happy with new Lion. Wooooo, confirm successful, with Chameleon RC3+boot from netkas, My Lion boot with DSDT, native Speedtep. Thanks. Laptop Acer Aspire 4937G Big Thanks Link to comment Share on other sites More sharing options...
CowboyMiller Posted March 8, 2011 Share Posted March 8, 2011 Added AppleACPIPS2Nub.kext to the 10.7 and my trackpad and keyboard now work. so i have sound, wifi, keyboard trackpad along with optical drive (connected to the same usb hub as the keyboard) So i tracked the fake RAM issue and the mouse tracking hickup down to something to do with the [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]. when i boot my perfectly working 10.6 from the [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]. the bios version and RAM and hickup issue persists. Still waiting on a decent boot up method. once i fixed the wifi issue i was able to boot to the ‘install; partition again and attempt to install the server packages but fails saying it ant find them. I cant manually find them either. Does anyone know if there anywhere else to be found?? I am still getting DF with RC3.....oh well Link to comment Share on other sites More sharing options...
thanh hoang Posted March 8, 2011 Share Posted March 8, 2011 Added AppleACPIPS2Nub.kext to the 10.7 and my trackpad and keyboard now work. so i have sound, wifi, keyboard trackpad along with optical drive (connected to the same usb hub as the keyboard) So i tracked the fake RAM issue and the mouse tracking hickup down to something to do with the [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]. when i boot my perfectly working 10.6 from the [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]. the bios version and RAM and hickup issue persists. Still waiting on a decent boot up method. once i fixed the wifi issue i was able to boot to the ‘install; partition again and attempt to install the server packages but fails saying it ant find them. I cant manually find them either. Does anyone know if there anywhere else to be found??I am still getting DF with RC3.....oh well - mouse tracking hickup down to something to do with the [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]=> Plug USB mouse and go System Preference=>Mouse, untick fist line. - server packages but fails=> Me too - You can try Chameleon RC3 and boot of netkas, only add: -v -usecache. you can use DSDT. Link to comment Share on other sites More sharing options...
DaviDemon Posted March 8, 2011 Share Posted March 8, 2011 To get the server packages, install Lion using "Mac OS X Install ESD" or something, and choose Server so that it downloads it from the internet. Then, copy those '.pkg' files to your install partition/usb and select it during install! Link to comment Share on other sites More sharing options...
asapreta Posted March 8, 2011 Share Posted March 8, 2011 Here you are.Lion_Bootloader.zip Thanks, I'll give this one a try. The one from netkas site ALWAYS give me the double fault error. Also I read something related to copying kernelcache file from install DMG to Lion's root partition on Netkas blog. I tried but still double fault error. Any other hints to avoid this when booting from chamelon? Link to comment Share on other sites More sharing options...
blackosx Posted March 8, 2011 Share Posted March 8, 2011 With the DSDT edits and an alternative ALC888 solution for layout-id 0x78 0x03 (found here) I have working sound. Hi Bansaku Thanks for posting that there's now a third ALC888 audio solution and it's good to hear you have it working. I haven't yet had a chance to look in depth at the differences between the two I knew about and now this one, but I will once the lion inertia has settled. Out of interest, did neither of the previous solutions work for you? Regards blackosx Link to comment Share on other sites More sharing options...
Sasan Posted March 8, 2011 Share Posted March 8, 2011 Can someone who has LION, please upload ATIFrameBuffer.kext ATISupport.kext and all ATIXXXXController.kext from LION to somewhere for testing in Snow Leopard? greatly appreciated. Link to comment Share on other sites More sharing options...
asapreta Posted March 8, 2011 Share Posted March 8, 2011 Can someone who has LION, please upload ATIFrameBuffer.kext ATISupport.kext and all ATIXXXXController.kext from LION to somewhere for testing in Snow Leopard? greatly appreciated. Netkas said his card worked without injectors with these files on snow. Link to comment Share on other sites More sharing options...
Sasan Posted March 8, 2011 Share Posted March 8, 2011 Netkas said his card worked without injectors with these files on snow. So If some one kindly upload these files rest of users can try out on their ATI Cards with these new drivers! Link to comment Share on other sites More sharing options...
Common Sense Posted March 8, 2011 Share Posted March 8, 2011 So If some one kindly upload these files rest of users can try out on their ATI Cards with these new drivers! Here you go ATI_kexts.zip Link to comment Share on other sites More sharing options...
farhanito Posted March 8, 2011 Share Posted March 8, 2011 Here you go. I hope it works for you (now my USB mouse or any USB port is not working, lol) thanx i think i managed to get my trackpad works, (i.e i can move the cursor with my trackpad).. but Lion keeps telling me i dont have mouse/trackpad connected so, my trackpad works but not detected.. weird.. still stuck after the welcome video, Link to comment Share on other sites More sharing options...
mitch_de Posted March 8, 2011 Share Posted March 8, 2011 So If some one kindly upload these files rest of users can try out on their ATI Cards with these new drivers! http://www.mediafire.com/?1eb2x1v1nuk4i6d Maybe helping, but i dont think so (all ATI from LION in that archive, rights for sure must be repaired!) Link to comment Share on other sites More sharing options...
diafebus Posted March 8, 2011 Share Posted March 8, 2011 you really can't wait for some more stable release why? Link to comment Share on other sites More sharing options...
dickhouse Posted March 8, 2011 Share Posted March 8, 2011 hey guys could u help me out anyone who succed running lion. Installation works flawlesly but when i boot into lion, it stuck on apple logo.. tried verbose mode and it stop in these lines nspace-spaceshot time xxx resetting iocatalogue.. Link to comment Share on other sites More sharing options...
ginosih Posted March 8, 2011 Share Posted March 8, 2011 lion, it's too slow to transfer file from external hdd on desktop...why?there is a next for this?tnxxx P.s. Anyone try some boot loader that work? tnxx Link to comment Share on other sites More sharing options...
Recommended Posts