schot Posted June 12, 2017 Share Posted June 12, 2017 I thing yes. Send me your bios and I will make a patch for you. That would be great, thanks. I tried to search on the net to find it but i could not. Here is the rom i use https://www.dropbox.com/s/fd1b70sbf62aed2/RX580MSIgamingX8.rom?dl=0 What are disadvantages of this vbios mod? Link to comment Share on other sites More sharing options...
Matthew82 Posted June 12, 2017 Share Posted June 12, 2017 https://www.dropbox.com/s/ggxhgquz8jwfv5a/RX580%20mod.rom?dl=0 2 Link to comment Share on other sites More sharing options...
vinhkm6 Posted June 12, 2017 Share Posted June 12, 2017 https://www.dropbox.com/s/ggxhgquz8jwfv5a/RX580%20mod.rom?dl=0 You can guide mod rom or have documentation on this issue tks you Link to comment Share on other sites More sharing options...
Matthew82 Posted June 12, 2017 Share Posted June 12, 2017 There is explanation http://www.insanelymac.com/forum/topic/313977-r9-nano/page-2 1 Link to comment Share on other sites More sharing options...
schot Posted June 12, 2017 Share Posted June 12, 2017 https://www.dropbox.com/s/ggxhgquz8jwfv5a/RX580%20mod.rom?dl=0 Thanks! I will try tonight. Only hoping in the future there will be a better solution for this problem but for now, it will be great! 1 Link to comment Share on other sites More sharing options...
hackaro Posted June 13, 2017 Share Posted June 13, 2017 Hello Mork, but why and why are you using CSM enabled? what motherboard are you using? CSM shouldn't be disabled? Finally i could report, that my Sapphire RX480 Nitro runs under macOS 10.13, too. But here are my results: • iGPU set to primary, RX480 in slot#1 as secondary, CSM enabled [CUT] Link to comment Share on other sites More sharing options...
firefly_can_fly Posted June 13, 2017 Share Posted June 13, 2017 Guys, what about 10.13 and RX 460? Did someone managed to make it work? Link to comment Share on other sites More sharing options...
Ciro82 Posted June 13, 2017 Author Share Posted June 13, 2017 Guys, what about 10.13 and RX 460? Did someone managed to make it work? Same as the RX470 and 480... Link to comment Share on other sites More sharing options...
Picasso Posted June 13, 2017 Share Posted June 13, 2017 I installed a 390x to get a powerfull Open CL and FCPX, here the result attached for someone interested: http://www.insanelymac.com/forum/topic/313977-r9-nano/?p=2443850 1 Link to comment Share on other sites More sharing options...
Max.1974 Posted June 13, 2017 Share Posted June 13, 2017 I installed a 390x to get a powerfull Open CL and FCPX, here the result attached for someone interested: http://www.insanelymac.com/forum/topic/313977-r9-nano/?p=2443850 Uowwww!! Very nice Man!!! Thanks... im thinking buy another, my Sapphire is go to guarantee but im thinking different kkkkk Would you post complete description, please Picasso? Nice GPU!!! This is native on Mac? Is like that? 1 Link to comment Share on other sites More sharing options...
Picasso Posted June 13, 2017 Share Posted June 13, 2017 Uowwww!! Very nice Man!!! Thanks... im thinking buy another, my Sapphire is go to guarantee but im thinking different kkkkk Would you post complete description, please Picasso? Nice GPU!!! This is native on Mac? Is like that? This is https://www.asus.com/Graphics-Cards/STRIXR9390XDC3OC8GD5GAMING/ Link to comment Share on other sites More sharing options...
Mork vom Ork Posted June 13, 2017 Share Posted June 13, 2017 Lots of changes in Sierra 10.12.6 beta3 (thx. to Ur-Quan): AMD9500Controller — Acre, Dayman, Guariba, Huallaga0x67E01002 0x67EF1002 0x67FF1002 0x67C01002 0x67DF1002AMD9510Controller — Berbice0x67EF1002AMD9515Controller — Longavi, Mazaruni0x67EF1002AMD9520Controller — Caroni, Elqui, Florin0x67E01002 0x67EF1002 0x67FF1002 0x67C01002 0x67DF1002AMDRadeonX4100_AMDBaffinGraphicsAccelerator0x67E01002 0x67FF1002 0x67EF1002AMDRadeonX4150_AMDBaffinGraphicsAccelerator0x67E01002 0x67FF1002 0x67EF1002AMDRadeonX4200_AMDBaffinGraphicsAccelerator0x67EF1002 0x67FF1002AMDRadeonX4200_AMDEllesmereGraphicsAccelerator0x67DF1002 0x67C01002 There is still a helper card needed to get full accelleration. But lots of changes and getting closer to same versions as in macOS 10.13. 3 Link to comment Share on other sites More sharing options...
Ur-Quan Posted June 13, 2017 Share Posted June 13, 2017 RX480/580 @ 10.12.6 Public Beta 3 (16G16b): Only FB and Model name injected, without patches. Still need iGPU or helper card. 2 Link to comment Share on other sites More sharing options...
Pavo Posted June 13, 2017 Share Posted June 13, 2017 I installed a 390x to get a powerfull Open CL and FCPX, here the result attached for someone interested: http://www.insanelymac.com/forum/topic/313977-r9-nano/?p=2443850 What does this have to do with anything Polaris? Things like this is what makes threads extremely long and makes people not look through them to find that 1 thread that has the information they need, please keep each thread to its intended topic. 1 Link to comment Share on other sites More sharing options...
hackaro Posted June 14, 2017 Share Posted June 14, 2017 Lots of changes in Sierra 10.12.6 beta3 (thx. to Ur-Quan): AMD9500Controller — Acre, Dayman, Guariba, Huallaga 0x67E01002 0x67EF1002 0x67FF1002 0x67C01002 0x67DF1002 AMD9510Controller — Berbice 0x67EF1002 AMD9515Controller — Longavi, Mazaruni 0x67EF1002 AMD9520Controller — Caroni, Elqui, Florin 0x67E01002 0x67EF1002 0x67FF1002 0x67C01002 0x67DF1002 AMDRadeonX4100_AMDBaffinGraphicsAccelerator 0x67E01002 0x67FF1002 0x67EF1002 AMDRadeonX4150_AMDBaffinGraphicsAccelerator 0x67E01002 0x67FF1002 0x67EF1002 AMDRadeonX4200_AMDBaffinGraphicsAccelerator 0x67EF1002 0x67FF1002 AMDRadeonX4200_AMDEllesmereGraphicsAccelerator 0x67DF1002 0x67C01002 There is still a helper card needed to get full accelleration. But lots of changes and getting closer to same versions as in macOS 10.13. It's not clear to me how I have to chose the correct FB for my RX480/580, could someone be so kind to explain me? Thank you. Link to comment Share on other sites More sharing options...
Ciro82 Posted June 14, 2017 Author Share Posted June 14, 2017 It's not clear to me how I have to chose the correct FB for my RX480/580, could someone be so kind to explain me? Thank you. Clover configurator, graphics, FB Name: Dayman Or DSDT injection 1 Link to comment Share on other sites More sharing options...
hackaro Posted June 14, 2017 Share Posted June 14, 2017 Clover configurator, graphics, FB Name: Dayman Or DSDT injection Grazie Ciro! But why Dayman? I mean 67DF is present in both AMD9500 and AMD9520. So it could be Caroni, Elqui, Florin or something else. How do you decide? Link to comment Share on other sites More sharing options...
Gigamaxx Posted June 14, 2017 Share Posted June 14, 2017 Lots of changes in Sierra 10.12.6 beta3 (thx. to Ur-Quan): AMD9500Controller — Acre, Dayman, Guariba, Huallaga 0x67E01002 0x67EF1002 0x67FF1002 0x67C01002 0x67DF1002 AMD9510Controller — Berbice 0x67EF1002 AMD9515Controller — Longavi, Mazaruni 0x67EF1002 AMD9520Controller — Caroni, Elqui, Florin 0x67E01002 0x67EF1002 0x67FF1002 0x67C01002 0x67DF1002 AMDRadeonX4100_AMDBaffinGraphicsAccelerator 0x67E01002 0x67FF1002 0x67EF1002 AMDRadeonX4150_AMDBaffinGraphicsAccelerator 0x67E01002 0x67FF1002 0x67EF1002 AMDRadeonX4200_AMDBaffinGraphicsAccelerator 0x67EF1002 0x67FF1002 AMDRadeonX4200_AMDEllesmereGraphicsAccelerator 0x67DF1002 0x67C01002 There is still a helper card needed to get full accelleration. But lots of changes and getting closer to same versions as in macOS 10.13. Gigabyte RX 560 running natively on 9500controllerkext and 4200kext. Prior to 12.6 v3 it needs 67FF mod, now its picked right up by our old friend the 9500controllerkext . 1 Link to comment Share on other sites More sharing options...
surfinchina Posted June 14, 2017 Share Posted June 14, 2017 I'm after some help if I can. I changed the X4100 kext by copying to the desktop, put in 73001002, then back to s/l/e via a kext injector, then repair permissions. About this mac tells me it's loaded, but further down you can see it says not loadable, and I don't have acceleration. Is it more difficult than it used to be to modify kexts? Link to comment Share on other sites More sharing options...
omnitrio Posted June 15, 2017 Share Posted June 15, 2017 Gigabyte RX 560 running natively on 9500controllerkext and 4200kext. Prior to 12.6 v3 it needs 67FF mod, now its picked right up by our old friend the 9500controllerkext . Primary iGPU is still need? Link to comment Share on other sites More sharing options...
Gigamaxx Posted June 15, 2017 Share Posted June 15, 2017 Primary iGPU is still need? Yes, primary IGPU is needed but no kext modification. 1 Link to comment Share on other sites More sharing options...
schot Posted June 15, 2017 Share Posted June 15, 2017 Primary iGPU is still need? Yes, and it will be for some while... iMac, MacbookPro both using also iGPU to boot. What i dislike the most is that it is always on in mac. Like i use a gt210 now in my X99 with a RX580 and i can not get it off, even nv_disable gives me an 'Nvidia adapter with 3mb of vram' i tried MonitorDisabler, and this works, but to sync screens it is difficult, sometimes i want sync screens and sometimes i want to work on 2 displays. I woork with 2 machine's and 2 screens, most of the time I will use on 1 hack 2 screens the second is more for when i am bouncing and want to work on another video, audio or photo's.. Also at first it was an old broken Mac Pro that i repaired, then i got a new Hackintosh and sold the MacPro and kept my old Hack i7 to have the second machine, now i had some spare processor and bought a second hand x99 board for almost nothing. To make it short i would love to have macOS does not find my GT210 at all but that is getting difficult..... Grazie Ciro! But why Dayman? I mean 67DF is present in both AMD9500 and AMD9520. So it could be Caroni, Elqui, Florin or something else. How do you decide? I use Caroni, i have no idea just put in in and it seems to work. But to be sure you can check somewhere on page 1 or 2 of this thread how to find your FB 1 Link to comment Share on other sites More sharing options...
Ur-Quan Posted June 15, 2017 Share Posted June 15, 2017 It's not clear to me how I have to chose the correct FB for my RX480/580, could someone be so kind to explain me? Thank you. http://www.insanelymac.com/forum/topic/303186-how-to-modification-of-amd-fb-clover-injection/ 1 Link to comment Share on other sites More sharing options...
manuel123 Posted June 16, 2017 Share Posted June 16, 2017 There seems to be a new checkroutine within AMD9500Controller: it checks for the Part# of the installed AMD card. If it finds this value for Part#: 113-4E3531U or 113-4E353BU , than it sets "Radeon RX 580" as modelname and chooses "Orinoco" (which will match perfectly for RX480!) instead of "AMD,RadeonFramebuffer" as its related framebuffer. Thats because Apples eGPU kit contains Sapphire AMD RX 580 PULSE as their bundled cards. You can check this with this patch within CLOVER: <dict> <key>Comment</key> <string>Part#_Patch</string> <key>Disabled</key> <false/> <key>Find</key> <data>MTEzLTRFMzUzQlU=</data> <key>Name</key> <string>AMD9500Controller</string> <key>Replace</key> <data>MTEzLVNFMzY2QVU=</data> </dict> ! You will have to replace the "Replace" value with Part# of your card. The one in the example above is my Part# ! To find out your part#, boot CLOVER with "Inject ATI = FALSE" and note your Partnumber. This will give you: Hi i tried to force through clover the orinoco framebuffer and it worked but still it is not enabled metal v2, could you please explain how I get the partnumber of my card, and then ,that part to put in clover cofig.plist can i put it anywhere? thank you so much Link to comment Share on other sites More sharing options...
telepati Posted June 17, 2017 Share Posted June 17, 2017 Yes, primary IGPU is needed but no kext modification. If IGPU primary we still need to swap cable IGPU to RX after boot right? Link to comment Share on other sites More sharing options...
Recommended Posts