the_gael Posted July 4, 2008 Share Posted July 4, 2008 Maybe an ftp link? I've got this bloody stupid HP Pavilion (Pentium D 930) running WinXPHome and I've yet to get a clean torrent link to a large file. (Although GetRight does a decent job for torrents *under* 300MB.) I'm thinking I should get a copy of the OSX Tiger release from Usenet... Any thoughts? Derek Derek - check your messages - I have sent you a message Link to comment Share on other sites More sharing options...
trackerweb Posted July 4, 2008 Share Posted July 4, 2008 Hi Kaly, finally i found you. Last month i try and i have sucess on install a OSX in my PC, i want say, thats is exelente work, i`m not use windows anymore, my hds are all HFS+, my pc, now its iPC, thanks to you. Thanks man, thank you so much, it so good. Im use the 10.5.1 right now, and have a one problem, i can boot only with the instalation dvd in the drive, but, i dont care, the rest works fine. Again, thanks for this, much apreciade, when i can, i want make a donations for you. One day make a instalation with 10.5.2 release. right now... big thanks man. Link to comment Share on other sites More sharing options...
XLostSpartanX Posted July 5, 2008 Share Posted July 5, 2008 I got this to install just fine on my Gateway MX6960, but it seems like a few things aren't workingl. WiFi, sounds, and the resolution. How do I fix these? Link to comment Share on other sites More sharing options...
cableguy Posted July 6, 2008 Share Posted July 6, 2008 From what I've read, and if you're running a vanilla kernel, you can go install 10.5.4 without any problems. YMMV though. I've sussed my kernel question btw. Well, I hosed my install trying to get 10.5.3 installed, so started again, and made sure I checked which kernel I was on. The default is not Vanilla. So now I'm running the Vanilla kernel, which seems quite happy, but still can't get the standard 10.5.3 to install using the guides I've found. The next step is to try the Kalyway 10.5.3 package. Then 10.5.4 from there. Cableguy, I should have an answer tonight as to whether 10.5.4 "just works". With the vanilla kernel, anyway. Hmm So should i do an update to 10.5.4 ? is it alot better than 10.5.2 ? Thanks Link to comment Share on other sites More sharing options...
matheuslotero Posted July 6, 2008 Share Posted July 6, 2008 Does Intel PRO/100 VE works great with this release? if not, is there any thing that i can do to solve it?? thankss Link to comment Share on other sites More sharing options...
desied Posted July 6, 2008 Share Posted July 6, 2008 hello to you all could anyone help me? motherboard: msi k9ngm amd 64 3500 on 500g sata hd [the second partition from 4 /// 60g formated as "something" (journaled) ] i was deselect all the packages too any suggestion ??? *********** localhost OSInstall[170]: run postinstall script for OSInstall localhost /Volumes/mac/private/tmp/scripts.Ka3b/ ./postinstall [807]: /Volumes/mac/private/tmp/scripts.Ka3b/ ./postinstall_actions/postinstall: line24: 850 Bus error chroot "$3" "/usr/... localhost ReportCrash [835] : Could not save crash report to disk! *********** MicroStar MSI Socket AM2 K9NGM-L FSB 1000 DDR2 800/SATA2/ATA133, PCI-E X16 USB Audio Socket 940 Motherboard Features CPU AMD® Athlon 64 X2, Athlon 64 and Sempron in the Socket AM2 package. FSB HyperTransport supporting speed up to 1GHz (2000MT/s) Chipset NVIDIA® GeForce 6100 and nForce 410 Chipset Main Memory Supports Dual DDR II 533/667/800 - 4 DDRII DIMMs (240pin / 1.8V) - Supports a maximum memory size up to 8GB. Slots One PCI Express x16 slot. One PCI Express x1 slot. Two PCI slots (support 3.3v/5v PCI bus interface). On-Board IDE Two IDE port by NVIDIA® nForce 410 - Supports Ultra DMA 66/100/133 mode - Supports PIO, Bus Master operation mode - Can connect up to four IDE devices On-Board SATA Two SATA II ports by NVIDIA® nForce 410 - Supports storage and data transfers at up to 300 MB/s Audio Chipset integrated by Realtek® ALC883 - Flexible 8-channel audio with jack sensing - Compliant with Azalia 1.0 Spec LAN Supports 10/100 Fast Ethernet by Realtek RTL8201CL Internal I/O Connectors - ATX 24-pin power connector - 4-pin ATX 12V power connector - CPU / System / NB FAN connectors - CD-in connector - Serial port header - IrDA infrared module header - 1 x Floppy disk drive connector - 2 x SATA II connectors - 2 x ATA133 HD connectors - 2 x USB 2.0 connector support additional 4 ports - SPDIF-Out/ SPDIF-In connector - Audio-Out connector - Front panel connector - Front panel audio connector - Chassis intrusion switch connector - Clear CMOS Jumper MSI Reminds You... The floppy disk cable will be optional. Back Panel I/O Ports - 1 x Parallel - 1 x PS/2 Keyboard - 1 x PS/2 Mouse - 1 x VGA port - 1 x Audio I/O (Line-in/Line-out/MIC) - 4 x USB 2.0 - 1 x RJ45 LAN Jack Link to comment Share on other sites More sharing options...
JoeBobJr Posted July 6, 2008 Share Posted July 6, 2008 I've installed this version of mac on my dell E1405. Installation went just fine then rebooted and got to the grey apple screen right before the welcome screen I assume. Then my screen goes black and I see nothing. Well from what I read in the readme file that is graphics problems. So I followed the instructions and typed -s at the darwin prompt. I got to the root login where it told me to type in mount -uw / and then /movevideodrivers after this it says I will be prompted whether I want to move them or not type yes if I do or enter to skip. Well I typed in mount -uw /movevideodrivers and get this error mount: unknown special file or file system /movevideodrivers So then I tried typing mount -uw / and then hitting enter and then typing /movevideodrivers and got this error /movevideodrivers: No such file or directory So then I try mount -uw / /movevideodrivers and get this error mount: realpath /movevideodrivers: No such file or directory Ok so I tried this command in many ways because honestly I have no clue what this person is trying to tell me to type in. I need some help here if I am not typing the right command can someone tell me what I need to type. I'm clueless on this and beside the video not working it seems everything else is fine. I can see my hard drive light going at it like it's loading ocx but I can't see nothing but a black screen. I need some assistance thanks. Link to comment Share on other sites More sharing options...
zizux Posted July 7, 2008 Share Posted July 7, 2008 I just got a C762NR (Best Buy $400 laptop that went on sale today) Anyway I'm getting a blue screen after install, sound starts playing etc but its just blue, so I figured I would hook it up to a 2nd monitor to see if it had been set to primary. I tried the following to no avail. Notes: if you have problems on reboot with video gfx (blue or black screen) All you have to do is just press F8 at Darwin's prompt and then type -s (single user mode) then at root type mount -uw / and /movevideodrivers then it will be prompt to move video drivers by class ( nvidia ; ati ; or intel gma) voila! type yes to confirm or enter to skip ! Any thoughts? Link to comment Share on other sites More sharing options...
zizux Posted July 7, 2008 Share Posted July 7, 2008 I found a solution to my issue, I installed it without the intel drivers and its working fine now, looks like the only thing I need support for now is the wifi card. Link to comment Share on other sites More sharing options...
Silentdesktop Posted July 7, 2008 Share Posted July 7, 2008 I had a chance to build up a custom hackingtosh with a G5 Pro Case. I got to admit this machine is not bad in comparison to some Mac G5's. Running Kalyway 10.5.1 with 3GHz Intel P4 Proc, 1GB ram, Sata DVD-r, 75GB Raptor, 7800GT Nvidia 256MB just installed (6600 shown in the photo but not recomended it really lagged the system). All works good with exceptions to sound. I'll figure it out some day but so far so good on 2 weeks going strong. Wish there was support for Auto Power on timer as macs have. But not complaining. Here's some photos: Link to comment Share on other sites More sharing options...
mehdi Ghamsary Posted July 7, 2008 Share Posted July 7, 2008 hi , very good ,Thank you Kaly Link to comment Share on other sites More sharing options...
yashveeer Posted July 7, 2008 Share Posted July 7, 2008 hi everyone actually i m a new user and i want 2 install os X i have downloaded "Kalyway_10.5.2_DVD_Intel_Amd" torrent and have burnt the disk by "Kalyway_10.5.2_DVD_Intel_Amd.iso" file but while installing the os i m stuck on this screen (in the attached picture). what should i do ? i dont understand whats this ADD_KEXT_TO_DVD and Natit.kext can any one help me.. thanks...!! Link to comment Share on other sites More sharing options...
dodo Posted July 8, 2008 Share Posted July 8, 2008 I got Dell XPS M170 P M 2.0ghz SSE2 nvidia GFX GO7600 GTX with 256mb 1 GB ram 533 FSB I get kernel panic at the DVD boot any suggestion would be appreciate. Link to comment Share on other sites More sharing options...
itsthechuck Posted July 8, 2008 Share Posted July 8, 2008 I've installed this version of mac on my dell E1405. Installation went just fine then rebooted and got to the grey apple screen right before the welcome screen I assume. Then my screen goes black and I see nothing. Well from what I read in the readme file that is graphics problems. So I followed the instructions and typed -s at the darwin prompt. I got to the root login where it told me to type in mount -uw / and then /movevideodrivers after this it says I will be prompted whether I want to move them or not type yes if I do or enter to skip. Well I typed in mount -uw /movevideodrivers and get this error mount: unknown special file or file system /movevideodrivers So then I tried typing mount -uw / and then hitting enter and then typing /movevideodrivers and got this error /movevideodrivers: No such file or directory So then I try mount -uw / /movevideodrivers and get this error mount: realpath /movevideodrivers: No such file or directory Ok so I tried this command in many ways because honestly I have no clue what this person is trying to tell me to type in. I need some help here if I am not typing the right command can someone tell me what I need to type. I'm clueless on this and beside the video not working it seems everything else is fine. I can see my hard drive light going at it like it's loading ocx but I can't see nothing but a black screen. I need some assistance thanks. I have the same problem and am wondering the same thing, any ideas? Link to comment Share on other sites More sharing options...
buzzair1001 Posted July 8, 2008 Share Posted July 8, 2008 i downloaded it... burned it... poped it in... selected the kernels... and i get Still Waiting for Root Device how the do i fix this because its pissing me the off... my pc specs: eVGA 680i SLI 122-CK-NF68-A1 intel core 2 quad evga nvidia 8800 gts 2 gigs ram Link to comment Share on other sites More sharing options...
sandr Posted July 8, 2008 Share Posted July 8, 2008 HP nc6400 notebook.945 chipset with gm950, 2 gb ram. install ok, reboot and filling up information.. "Do you already own a Mac" I choose Don not transfer .. click continue... It than go back to the 1st page and start asking language again... any hints? Same problem HP tc4400 Sata hdd 250gb ICH GMA950 2GBRam hey "hkechung", write the following commands ....While booting press F8 and type the following in the "boot:" cmd line:sudo_-s .... where ? in Single user interface ??? or in Boot menu ???? >#sudo -s >#/sbin/mount -uw / >#passwd root (this will then ask u to enter the new password for the root two time... don`t worry if the screen shows nothing that u have typed.....its for security purpose) >#touch /var/db/.applesetupdone >#reboot After the above things when it reboots it will take directly to the login screen... just login with the root account and with the password u gave just above and enjoy!!!!! in Single User - when i type ># passwd root i get error "launch_msg(): Socket is not connected passwd: Unable to open Directory node with name /Local/Default. Unable to open node." Link to comment Share on other sites More sharing options...
dodo Posted July 8, 2008 Share Posted July 8, 2008 I got Dell XPS M170 P M 2.0ghz SSE2nvidia GFX GO7600 GTX with 256mb 1 GB ram 533 FSB I get kernel panic at the DVD boot any suggestion would be appreciate. any one help please........ Link to comment Share on other sites More sharing options...
sandr Posted July 8, 2008 Share Posted July 8, 2008 i fix my trouble when boot Press F8 load in singleuser - (type "-s"<Enter>) when prompted #/sbin/mount -uw / #passwd root enter password twice #touch /var/db/.applesetupdone #reboot all of previous solution but without #sudo -s Link to comment Share on other sites More sharing options...
chesca_m Posted July 8, 2008 Share Posted July 8, 2008 will this work with my amd x2 64 4600 asrock alive nf7g-fullhd 1 gb ram on board video/audio/lan. coz i dont see any nf7 board there. thanks. Link to comment Share on other sites More sharing options...
buzzair1001 Posted July 8, 2008 Share Posted July 8, 2008 will it work on my: eVGA 680i SLI 122-CK-NF68-A1 intel core 2 quad evga nvidia 8800 gts if not... which version will... Link to comment Share on other sites More sharing options...
h@zY Posted July 9, 2008 Share Posted July 9, 2008 #/sbin/mount -uw / #passwd root enter password twice #touch /var/db/.applesetupdone #reboot THANK YOU!!! and one more THANK YOU! Absolute brilliance, lol. Here I am trying to fix the problem, when there is a MUCH better work-around Link to comment Share on other sites More sharing options...
Xenn0X Posted July 9, 2008 Share Posted July 9, 2008 i get a kernel panic due my incompatible pcmcia card slot. kalyway 10.5.1 works fine and just goes past it. Link to comment Share on other sites More sharing options...
ngodieuduong Posted July 9, 2008 Share Posted July 9, 2008 Hi Everyone, I have problem but I can't solve, can you help me? My Problem when I try to install Mac(use Kalyway_10.5.2_DVD_Intel_Amd) into PC Vostro 400, when success and after bootup to Intro Screen See these Image Below After I select Do not tranfer ... it back to Intro screen again. Can any one help me solve this problem? Thanks Link to comment Share on other sites More sharing options...
LUCI5R Posted July 9, 2008 Share Posted July 9, 2008 Hey Guys, Last night I tried installing Kalyway 10.5.2 on my PC (I already have Vista installed in one partition - trying to install Leopard in a second partition). When I boot from the Kalyway DVD, I keep getting stuck at a Kernel Panic, and it stops at this: Kernel Version: Darwin Kernel Version 9.2.0: Sun Mar 2 00:11:08 SCT 2008; made by ToH:xnu-1228/BUILD/obj/RELEASE_i386 After this nothing happens. I have to reboot manually. I couldn't get past it. I have an Intel Q9450/ASUS P5Q Deluxe/4GB OCZ PC2-8500/ATI Radeon X1950PRO system. Any advice? Link to comment Share on other sites More sharing options...
verdant Posted July 10, 2008 Share Posted July 10, 2008 i downloaded it... burned it... poped it in... selected the kernels... and i get Still Waiting for Root Devicehow the do i fix this because its pissing me the off... my pc specs: eVGA 680i SLI 122-CK-NF68-A1 intel core 2 quad evga nvidia 8800 gts 2 gigs ram Check my iATKOS v2.0i install guide in my blog......it has helped others to install successfully.... You can follow a similar procedure with Kalyway 10.5.2 install DVD.....BUT also definitely read Mysticus C*'s brilliant nForce chipset install guide here as it covers just about every problem.... Link to comment Share on other sites More sharing options...
Recommended Posts