zeusx7 Posted July 30, 2010 Share Posted July 30, 2010 hello! guys.. i have a HP Pavillion.... and i wanna try it... already downloaded the image... can i get some help please? thanks 4 ur time Link to comment Share on other sites More sharing options...
inka Posted August 4, 2010 Share Posted August 4, 2010 Thank you, Kaly! Can't wait to install thnaxx Link to comment Share on other sites More sharing options...
MainMan Posted September 21, 2010 Share Posted September 21, 2010 Hi, Where to download this and how to install ? Any step by step instructions are highly appreciated. Thank you. Link to comment Share on other sites More sharing options...
Empty Memory Posted September 21, 2010 Share Posted September 21, 2010 Hi MainMan ... a few suggestions to start: you'd better put your hardware list in your signature or in the post or any further help will be nearly impossible. Read more ... if search engine of the forum is not fully satisfying, well, Google for the questions you have, just adding always keywords such as "Osx86" or "insanelymac" ... and you'll get nearly anything you look for. Basically 10.5.2 release is nice, but pretty old. It's not easy to still get it alive, but I'm not sure about it. So, you should try searching usual places, but nobody will ever give you a link in a forum. Google helps a lot if just know the extension to add to the search . Depending on your HW, why don't you check the HCL on the OSX86 wiki (top right of the page), then get a newer release. Mobo & drivers or laptops are better supported, with more stable drivers. For older PCs I suggest 10.5.8 (there are almost two very good distros around, check my signature) and for newer HW 10.6 to 10.6.2 are also easier to intall and get it fully working, again, check HCL. Ciaooo !! Link to comment Share on other sites More sharing options...
gmodfan Posted November 18, 2010 Share Posted November 18, 2010 Where is the download link? Link to comment Share on other sites More sharing options...
Empty Memory Posted November 20, 2010 Share Posted November 20, 2010 there aren't any download links here, execpt for drivers or specific projects ... As written above, you can only search the :censored2: web or better :pirate2: P2P Link to comment Share on other sites More sharing options...
titan1719 Posted November 21, 2010 Share Posted November 21, 2010 Kalyway 10.5.2 DVD Intel_Amd (sse2/sse3) EFI V8 you can find HELP on: #kalyway.DVD irc.osx86.hu #leopard irc.osx86.hu DONATION at http://kalyway.xdir.fr DONATE for this DVD !!! checksum for Kalyway_10.5.2_DVD_Intel_Amd.iso SHA-1 d48c058c8f2e61a636556fc3152208a35a96150d MD5 e03af401cc9e0baab1401199170ddf99 Read carefully !!! if you want adding drivers support to dvd boot you must put the Kalyway_10.5.2_DVD_Intel_Amd folder on your desktop then put kexts you want add to dvd extensions in the ADD_KEXT_TO_DVD folder (you can find natit for ati hd in this folder) and run Add_kext_to_dvd_boot.command !!! all ich support ! sitll remain problem with jmicron ide dvd support ! based on slipstream script by DENSE ! ichx (all ports) support by DUNE ! Notes: if you have problems on reboot with video gfx (blue or black screen) All you have to do is just press F8 at Darwin's prompt and then type -s (single user mode) then at root type mount -uw / and /movevideodrivers then it will be prompt to move video drivers by class ( nvidia ; ati ; or intel gma) voila! type yes to confirm or enter to skip ! Even if you have chosen a kernel at install, you can still try the others kernels after installation ! (same thing for dvd boot except that only modbinkernel , speedstepkernel , kabylkernel and nforcekernel are available as boot options !) All you have to do is just press F8 at Darwin's prompt and then type the kernel's name you want to boot with : sleepkernel (intel/amd/sse2/sse3) speedstepkernel (intel/amd/sse2/sse3) nforcekernel (intel/sse3) modbinkernel (intel/amd/sse3) vanillakernel (intel/sse3) kabylkernel (intel/sse3) with sleep support Kernels kernel_9.2_sleep kernel_9.2_speedstep kernel_9.2.2_kabyl kernel_922_modbin kernel_92_nforce kernel_vanilla_922 Graphics_Drivers Ati_Radeon X1000Series ATYinject for 19xx series NATIT_For_X1000_series ATIRadeonX1000SeriesGraphics 1950gt_pro X2000_HD_and_X3000_HD_Series NATIT_For_X2000_X3000_Series HD2900xt_pro white_menus_fixe_HD2600_pro white_menus_fixe_HD3850_3870x2 ATI_Radeon_HD_2600_Pro_AGP (this one no need for natit and white menufix) ATI_Radeon_HD_2600_XT_AGP (this one no need for natit and white menufix) Nvidia_Geforce (select one only) NVinject NVinject-128 NVinject-256 NVinject-320 NVinject-512 NVinject-640 NVinject-768 NVinjectGO NVinjectGO-512 NVInject_Clevo_M570RU 8700gfx NATIT_gfnvidia Intel_GMA GMA950 (tiger one full accelerated and resolution support but with mouse artifact) GMAX3100 (not tested) Audio_Drivers Intel NVIDIA VIA ATI HDAudioController NVIDIAAC97Audio Realtek Sigmatel ConexantAnalogDevicesHDAudioCodec (generic output support) ALC883_DS3,p5k pro etc... alc889a_shutdown_support ALC882_p5w_dh_deluxe sigmatel_9200_inspiron_9400 Networks_Drivers Networks_Cards AppleBCM440XEthernet AppleBCM5751Ethernet AppleRTL8169Ethernet MarvellNetworkAdapter RealtekR1000 skge_marvell forcedeth Wifi_Card IO80211Family AtherosWirelessAdapter Zydas-ZD1211-1215 wifi_Broadcom_airport RT2500-RT73-USB wifi_AP_Realtek_RTL8187L wifi_Realtek_RTL8187B iwi2200beta Mobo_Chipsets (support for ati ; nvidia ; intel ; via ; sis ; marvell ; jmicron) AppleNForceATA AppleOnboardPCATA AppleVIAATA AppleGenericPCATA SiliconImage3132 Thirds_Applications (will be installed in /applications/KOOLSOFTS/) adium archives candybar changeFinder colloquy fairmount Growl GmailNotifier kextHelperB7 onyx Iphoto macam_iusbcam MacTheRipper Mojo Proxi pacifist perian ppfomatic SimplyBurns solarseek stuffitExpander textmate transmission vlc xbench Patches Hardcoded_SMBIOS Lastnetkassmbios (with coreplayer fix , mozzy and logmein !) AppleSMBIOS-27-Default AppleSMBIOS-27-667 AppleSMBIOS-27-800 AppleSMBIOS-27-1066 AppleSMBIOS-27-DDR3-1333 AppleSMBIOS-27-IM AppleSMBIOS-27-MB AppleSMBIOS-27-MBMem AppleSMBIOS-27-MP OLD tiger SMBIOS_1.0.1 SSE2_Jas1048_ACPI_APIC (may or not work) AppleACPIPlatform AppleAPIC Others PATCHES cpus=1 flag Francais_pc_keyboard_layout TimeMachineFix PowerManagement_bundle (don't install it if you have select sse2 patch !!!) IntelMemoryController USBPCGen (fix usbehci detection problem , enable usb2) AMD_1052_Patches (select patch 1 or patch 2) AMD_1052_Patch_test_1 AMD_1052_Patch_test_2 -legacy flag BIG THX to Dune , Dense , modbin, jas , Joe75 , etorix , netkas , rp4k , tehmachacker ,zef , kabyl , magicone , jacquesdupontd , lastexile , chiva4ry , rofl , unisex ,asap18 , xyz , and all the others ! you know who you are! Think of this as of a demo version and as of a free marketing campaign. Therefore, let it be ENJOY ! if you love MacOSX think to buy it !!! This DVD should only be used to preview Mac OS X Leopard. If you really like Mac OS X Leopard and you want to use it, you should get a real Mac. If buying a real Mac is too much, you can, at least, buy a license for Mac OS X Leopard. GRACIASSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS!!! Link to comment Share on other sites More sharing options...
webcrawler Posted January 5, 2011 Share Posted January 5, 2011 i made it running on my PC but it is still boots at dvd how can i make it boot on my hdd?? need help please. Link to comment Share on other sites More sharing options...
mrnaldi Posted May 28, 2011 Share Posted May 28, 2011 Hi, I've tried to installad this version of Leopard on my HP DX2300M. It works perfetcly, but when I update to 10.5.8, it goes on kernel panic. Without this update, I can't configure my iPhone on iTunes. These are the specifications of my computer: - Motherboard: I think it is an Intel - Chipset: Intel Broadwater i946GZ - CPU: Intel Pentium Dual-Core E2160 1.8Ghz - Audio: Realtek ALC888 - RAM: Corsair XMS2 2x1GB DDR2 800Mhz - Graphics: nVidia GeForce 8600GT 256MB DDR3 - Ehternet: Intel 82801GB ICH7 Realtek RTL8139 - SATA: Intel ICH7 Family Thank you in advance for your replay and sorry about my bad english: I'm italian. Link to comment Share on other sites More sharing options...
notdefined Posted June 30, 2011 Share Posted June 30, 2011 Where exactly is the download link? I've already submitted a donation via PayPal. Hardware: Gigabyte GA-P55A-UD4 F12 Intel Core i7-860 Diamond ATI Radeon HD5770 8G Corsair RAM Two BenQ 24" LCD monitors 3 500G SATA disk 1 2TB SATA disk Link to comment Share on other sites More sharing options...
Rhymesnme Posted July 22, 2019 Share Posted July 22, 2019 Hi, am also using the same Kalyway dualbooting program 10.5.2 DVD Intel_Amd and I'm getting the picture below. I have tried the Add Kext to Dvd command at the Kalyway boot screen which gives me the option to press any key to continue or F8 to choose the startup volume which gives me same problem. Link to comment Share on other sites More sharing options...
Rhymesnme Posted July 22, 2019 Share Posted July 22, 2019 Hi, am also using the same Kalyway dualbooting program 10.5.2 DVD Intel_Amd and I'm getting the picture below. I have tried the Add Kext to Dvd command at the Kalyway boot screen which gives me the option to press any key to continue or F8 to choose the startup volume which gives me same problem. _______________ Lol, this is my reply. I have solved this. Link to comment Share on other sites More sharing options...
Recommended Posts