sandr

in LSPCI report 02:00.0 Ethernet controller [0200]: Attansic Technology Corp. L1 Gigabit Ethernet Adapter [1969:1026] (rev b0) 04:01.0 Ethernet controller [0200]: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 [8086:1229] (rev 08)

Asus P5Q + pci nic Intel82557 10.5.7 native boot Chameleon v2 After install kext with kextHelper cant find ethernet device in system preferences i see only one NIC Intel82557 en0 in system log only one record contain Attan* on each system start Jun 24 10:16:27 localhost kernel[0]: AttansicL1eEthernet: Ethernet address 00:22:15:90:c1:91 Jun 24 10:26:42 localhost kernel[0]: AttansicL1eEthernet: Ethernet address 00:22:15:90:c1:91 Jun 24 10:32:42 localhost kernel[0]: AttansicL1eEthernet: Ethernet address 00:22:15:90:c1:91 Jun 24 10:38:49 localhost kernel[0]: AttansicL1eEthernet: Ethernet address 00:22:15:90:c1:91 i try: - boot with/wo plugged networ cabble - remove Intel82557 and boot - check permissions no result (in WinXP L1E work good) any help?

Any result? i have same laptop TC4400

Another way Just add AppleBCM5751Ethernet.kext to /System/Library/Extension/ Set permissions and Clear Extensions Cache AppleBCM5751Ethernet.kext.zip

generic.iso from first post was removed from mediafire Anybody please upload again!

iDeneb 10.5.5 on Asus p5q - NIC Atheros 1026:1969 install driver repair permission after rebbot - in Network Config i see all my NICs (Intel Pro/100 and Atheros) i manualy config Atheros with settings from WindowsXP (disable Intel pro NIC) Networ interface look like good (green bulb etc) but cant open any web page etc And not ping to any ip in my office ifconfig lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 inet 127.0.0.1 netmask 0xff000000 inet6 ::1 prefixlen 128 gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280 stf0: flags=0<> mtu 1280 fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 2030 lladdr 00:1e:8c:00:01:71:5a:8a media: autoselect <full-duplex> status: inactive supported media: autoselect <full-duplex> en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet6 fe80::222:15ff:fe90:c191%en1 prefixlen 64 scopeid 0x5 inet 192.168.0.213 netmask 0xffff0000 broadcast 192.168.255.255 ether 00:22:15:90:c1:91 media: autoselect (1000baseT <full-duplex>) status: active supported media: autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 100baseTX <half-duplex> 100baseTX <full-duplex> 1000baseT <half-duplex> 1000baseT <full-duplex> en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet6 fe80::290:27ff:fea7:5120%en0 prefixlen 64 scopeid 0x6 inet 192.168.100.109 netmask 0xffffff00 broadcast 192.168.100.255 ether 00:90:27:a7:51:20 media: autoselect (100baseTX <full-duplex>) status: active supported media: autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 100baseTX <half-duplex> 100baseTX <full-duplex> reboot - to windows - all work good if enable Intel Pro/100 NIC - worked!!!

And i search way to make it work

Dear Kabyl Great work can you make an mod bios for MB Asus p5q bios ver 1611 or can i use - P5Q-E-ASUS-0803 bios from http://osrom.net/biosmod ???? Also please please..... - can you make an mod for our laptops HP TC4400 Bios F.0B 13 Jul 2007 ---------------- my system: PCI-e nVidia 8600 GT 4Gb ram 500gb sata HD

Can anybody say - This solution is suitable for 10.5.5 (9.5.0 Darwin Kernel)???

look in first post:

Any body can help me? i have installed iDeneb 10.5.4 + update to 10.5.5 on HP TC 4400 Both variants not work with dual cores Periodically system Can work as hours, without interruption with all cores But more often the system freeze after 3-5 minutes of work i don't know why!! if on boot i type cpus=1 system work perfect

HP tc4400 Bios F.0C dsdt.dat.zip

Wireless on my TC4400 with MiniPCI-e Dell 1490 from eBay

Good News on my both laptops (HP tc4400 & nx9420) - wlan card Dell 1490 14e4:4312 with subsys 1360:103c working good no more error "104 Unsupported ....." I write this post from my iHp tc4400 Osx 10.5.5 wia wlan, no any problem with OSX - just boot into. System find AirPort and all wireless network arround ^)

All supported BCM by Broadcom Wireless LAN Driver (sp38766) This driver package for HP TC440 from HP site [bROADCOM] %BCM430G_DeviceDesc% = BCM43XG, PCI\VEN_14E4&DEV_4320&SUBSYS_00E70E11&REV_03 %BCM430G_DeviceDesc% = BCM43XGT, PCI\VEN_14E4&DEV_4320&SUBSYS_12F4103C&REV_03 %BCM430G_DeviceDesc% = BCM43XG1, PCI\VEN_14E4&DEV_4320&SUBSYS_12F8103C&REV_03 %BCM430G_DeviceDesc% = BCM43XG2, PCI\VEN_14E4&DEV_4320&SUBSYS_12FA103C&REV_03 %BCM430G_DeviceDesc% = BCM43XG3, PCI\VEN_14E4&DEV_4320&SUBSYS_12FB103C&REV_03 %BCM430M_DeviceDesc% = BCM43XM1, PCI\VEN_14E4&DEV_4324&SUBSYS_12F9103C&REV_03 %BCM430M_DeviceDesc% = BCM43XM2, PCI\VEN_14E4&DEV_4324&SUBSYS_12FC103C&REV_03 %BCM430G_DeviceDesc% = BCM43XG1, PCI\VEN_14E4&DEV_4318&SUBSYS_1355103C %BCM430G_DeviceDesc% = BCM43XG2, PCI\VEN_14E4&DEV_4318&SUBSYS_1356103C %BCM430G_DeviceDesc% = BCM43XG3, PCI\VEN_14E4&DEV_4318&SUBSYS_1357103C %BCM430M_DeviceDesc% = BCM43XM1, PCI\VEN_14E4&DEV_4319&SUBSYS_1358103C %BCM430M_DeviceDesc% = BCM43XM2, PCI\VEN_14E4&DEV_4319&SUBSYS_1359103C %BCM430M_DeviceDesc% = BCM43XM3, PCI\VEN_14E4&DEV_4319&SUBSYS_135A103C %BCM430G_DeviceDesc% = BCM43XG11, PCI\VEN_14E4&DEV_4311&SUBSYS_1363103C %BCM430G_DeviceDesc% = BCM43XG12, PCI\VEN_14E4&DEV_4311&SUBSYS_1364103C %BCM430G_DeviceDesc% = BCM43XG13, PCI\VEN_14E4&DEV_4311&SUBSYS_1365103C %BCM430M_DeviceDesc% = BCM43XM11, PCI\VEN_14E4&DEV_4312&SUBSYS_1360103C %BCM430M_DeviceDesc% = BCM43XM12, PCI\VEN_14E4&DEV_4312&SUBSYS_1361103C %BCM430M_DeviceDesc% = BCM43XM13, PCI\VEN_14E4&DEV_4312&SUBSYS_1362103C %BCM430M_DeviceDesc% = BCM43XM14, PCI\VEN_14E4&DEV_4312&SUBSYS_135F103C %BCM430G_DeviceDesc% = BCM43XG11, PCI\VEN_14E4&DEV_4311&SUBSYS_1374103C %BCM430G_DeviceDesc% = BCM43XG12, PCI\VEN_14E4&DEV_4311&SUBSYS_1375103C %BCM430G_DeviceDesc% = BCM43XG13, PCI\VEN_14E4&DEV_4311&SUBSYS_1376103C %BCM430G_DeviceDesc% = BCM43XG14, PCI\VEN_14E4&DEV_4311&SUBSYS_1377103C %BCM430M_DeviceDesc% = BCM43XM11, PCI\VEN_14E4&DEV_4312&SUBSYS_1370103C %BCM430M_DeviceDesc% = BCM43XM12, PCI\VEN_14E4&DEV_4312&SUBSYS_1371103C %BCM430M_DeviceDesc% = BCM43XM13, PCI\VEN_14E4&DEV_4312&SUBSYS_1372103C %BCM430M_DeviceDesc% = BCM43XM14, PCI\VEN_14E4&DEV_4312&SUBSYS_1373103C %BCM430NM_DeviceDesc% = BCM43XNM11, PCI\VEN_14E4&DEV_4328&SUBSYS_1366103C %BCM430NM_DeviceDesc% = BCM43XNM12, PCI\VEN_14E4&DEV_4328&SUBSYS_1367103C %BCM430NM_DeviceDesc% = BCM43XNM13, PCI\VEN_14E4&DEV_4328&SUBSYS_1368103C %BCM430NM_DeviceDesc% = BCM43XNM14, PCI\VEN_14E4&DEV_4328&SUBSYS_1369103C %BCM430G_DeviceDesc% = BCM43XG11, PCI\VEN_14E4&DEV_4315&SUBSYS_137C103C %BCM430G_DeviceDesc% = BCM43XG12, PCI\VEN_14E4&DEV_4315&SUBSYS_137D103C %BCM4322NM_DeviceDesc% = BCM43XNM21, PCI\VEN_14E4&DEV_432B&SUBSYS_137F103C %BCM4322NM_DeviceDesc% = BCM43XNM22, PCI\VEN_14E4&DEV_432B&SUBSYS_1380103C