Hardware Compatibility List - Leopard 10.5.2

[linuxgod]

Current OS X Version: 10.5.2

 

Desktop/Laptop?

 

Desktop

 

Prebuilt? (Y/N) No

 

Install Methods summary: Both work - Installed using Kalyway 10.5.2 full install using default kernel.

Installed using ToH 10.5.2 full install with default kernel (ToH took 3 hours to install, Kalyway took 45 min.)

 

Does EFI and/or the Vanilla kernel work? Both EFI & Vanilla kernel work

 

(in following sections, if you don't know or not sure, write "unknown")

Motherboard

Manufacturer: MSI

Motherboard Model: P4MAM2-V

Chipset: VIA 8237®

BIOS Version: 6.00 , Revision:

BIOS setup options: All options set a default

Audio: Works out of the box? Yes, but must be run at 48khz rather than 44khz (running audio at 44khz sounds like a chipmunk)

LAN: No, needs VIARhine.kext patch

SATA & IDE: IDE works OOB, SATA unknown

 

Processor

Processor Model: Celeron D

Speed: 2.4Ghz

Recognized as what in System Profiler: Macbook Pro 2.4Ghz

 

Video Card (if you have integrated and PCI/AGP, use this template twice)

What type of card (PCI Express/AGP/Integrated): AGP

NVIDIA/ATI/Intel? NVidia

Model: GeForce FX 5200

Memory: 256MB

Board Manufacturer: XFX

Patches used: none

QE/CI: N/A

All resolutions available? Yes

 

Other PCI/PCI-e Components (USB are listed in Other Accessories below) none

Wireless/Wired Card (for PCI/PCI-e cards only) none

Interface: PCI/PCI-e? none

Standard (Wireless only): (example: 801n) N/A

Manufacturer: N/A

Model: N/A

Works? (Y/N, if "Y", list patches) N/A

Patches: N/A

 

Sound Card (this is for PCI/PCI-e cards only - integrated on motherboard is in motherboard section) NONE

Interface: PCI/PCI-e?

Manufacturer:

Model:

Works? (Y/N, if "Y", list patches)

Patches:

 

Other Accessories (USB/FIREWIRE)

Type (Webcam, External Sound Card, USB bluetooth dongle, etc.): Smart Card Reader

Name: OHM Card Reader

Manufacturer: Ohm inc.

Works? (Y/N, if "Y", list patches, if needed) Y

Patches/Work out of the box? OOB

[kugelinis]

Current OS X Version: 10.5.2 (now updated to 10.5.3, but everything is same)

 

Desktop/Laptop?

Desktop

 

Prebuilt? (Y/N) No

 

Installed using Kalyway 10.5.2 full install using default kernel. I think install take about 25 mins.

 

Does EFI and/or the Vanilla kernel work? EFI don't know (have to use boot_v8 from efi 8 package to GRUB) but vanilla not.

 

(in following sections, if you don't know or not sure, write "unknown")

Motherboard

Manufacturer: Gigabyte

Motherboard Model: 8i945PL-G

Chipset: unknown

BIOS Version: unknown (i know that it's 2005 year made)

BIOS setup options: All options set a default

Audio: ALC882 Works out of the box? Yes.

LAN: Broadcom 5789 (dev id 169D) Working, with setmac script.

SATA & IDE: IDE unknown, SATA OOB

 

Processor

Processor Model: Pentium D

Speed: 2.8Ghz

Recognized as what in System Profiler: System recognizes pc as MacPro 3.1

Thats how recongnize

 

Video Card (if you have integrated and PCI/AGP, use this template twice)

What type of card (PCI Express/AGP/Integrated): PCI-E

NVIDIA/ATI/Intel? NVidia

Model: GeForce 6600GT

Memory: 128MB

Board Manufacturer: Asus

Patches used: OOB

QE/CI: YES/YES

All resolutions available? Yes (i've max 1280x1024 for my monitor it's 17 inch CRT)

[Alda]

Current OS X Version: 10.5.2

 

Desktop

 

Prebuilt? N

 

Installed using Kalyway 10.5.2 full install using default kernel

 

Does EFI and/or the Vanilla kernel work? works

 

Motherboard

Manufacturer: Gigabyte

Motherboard Model:GIGABYTE EP35-DS4 (rev.2.1)

Chipset:EP35

BIOS Version: , Revision:2.1

BIOS setup options: default

Audio: Works

LAN: Works

SATA & IDE: Works

 

Processor

Processor Model:Intel Core 2 Duo E7200 BOX

Speed:2,53

Recognized as what in System Profiler:

 

Video Card

What type of card PCI Express:

ATI

Model:4850

Memory:512

Board Manufacturer:PowerColor HD 4850 512MB DDR3

Patches used:no

Vendor ATI(0x1002)

Device ID 0x9442

Revision 0x0000

VRAM (total) 256 MB

Core Image Software

QE/CI:

All resolutions available? still testing

works but quartz extreme not supported

 

 

Other PCI/PCI-e Components

Interface: PCI/PCI-e? works

 

USB multi memory card reader and fan speed controller

Aerocool FP-01

Works with drivers

[pastis]

Current OS X Version: 10.5.3

 

Desktop/Laptop? Desktop

 

Prebuilt? (N)

 

 

Install Methods summary: Played with both Leo4Allv3 and Kalyway 10.5.2->patched to 10.5.3 using vanilla. Decided Kalyway was more stable and added more "pc-like" features (like ootb Realtek wireless support for one).

 

Does EFI and/or the Vanilla kernel work? MBR, Vanilla Kernel 9.2, ( then vanilla 9.3 post-10.5.3 update).

 

Motherboard

Manufacturer: Asus

Motherboard Model: P5k Deluxe WiFi AP

Chipset: Intel ICH9 (P35)

BIOS Version: 0812, Revision: (n/a)

BIOS setup options: SATA: AHCI, JMicron: disabled (because I have no IDE devices), suspend mode: S3 Only, repost video on s3 resume: disabled, USB Legacy Support: enabled (might help with usb bluetooth devices at bios post), everything else default

Audio: Works out of the box? Make sure you select the 883 option

LAN: Works out of the box? Both LAN ports work fine, WLAN works fine

SATA & IDE: I have no IDE devices. All 3 SATA harddrives (2 WD 500GB and 1 Seagate 80GB) and 2 optical drives (LG BD-RE DL burner and Samsung OEM DVD+RW DL) work.

 

Processor

Processor Model: Intel QX6700 Core 2 Extreme

Speed: 2.66

Recognized as what in System Profiler: 2.67 GHz Intel Core 2 Quad

 

Video Card

What type of card (PCI Express/AGP/Integrated): PCIex16

NVIDIA/ATI/Intel? NVIDIA

Model: 8600GT

Memory: 512

Board Manufacturer: eVGA

Patches used:none

QE/CI: use nvinject-512 to unlock anything above 1024x768

All resolutions available? yes and QE/CI working just fine on an Apple Cinema 23" aluminum display

 

Other Accessories (USB/FIREWIRE)

Type: Webcam

Name: iSight

Manufacturer: Apple

Works? Yes

Patches/Work out of the box? Works out of the box

 

 

Type: USB bluetooth dongle

Name: GBU421 Micro USB Bluetooth Adapter

Manufacturer: IOGear

Works? Yes, but will lose Keyboard and Mouse often and will not repair, NOT RECOMMENDED

Patches/Work out of the box? Piece of {censored}, try another micro adapter.

 

 

Type: USB bluetooth dongle

Name: 4321 USB Bluetooth Adapter

Manufacturer: Zoom

Works? Yes, works 10 times better than IOGear one

Patches/Work out of the box? No problem syncing mouse/keyboard and maintaining connection

 

Other notes:

I'm using a Lian-Li PC-V600 silver aluminum case, and while things are pretty tight inside the case, I'm maintaining decent temperatures. My home office has poor air circulation (and lousy A/C), and with two cheap "cyclone blowers" in the pci slots plus the onboard fans, I'm doing just fine. I wanted this case for it's cheese-grater G5 Mac Pro look, and I'm seriously happy with this decision.

 

Otherwise, I cannot get Leopard to support 8 GB DDR2 667MHz (bargain) Crucial RAM. It does fine with 6GB and 6.5GB, but anything beyond that causes the "You need to restart your mac" message immediately following the OS load. I've moved around that final 2GB stick to several slots and that has no effect, so I'm thinking either that one stick of 2GB is bad or Leopard can't do 8GB in this config. EDIT: Yup, it was just a bad stick. I'm running 8GB just fine now.

[letopo]

Current OS X Version: 10.5.2

 

Desktop/Laptop?

 

Prebuilt? (Y/N)

(If prebuilt then add following information, otherwise fill the Motherboard:)

Manufacturer: (example Dell?)

Model: (example Inspiron xxx?)

 

Install Methods summary: (List all methods tested, check preferred method - the one you are writing about now)

 

Does EFI and/or the Vanilla kernel work? (example: partitioned as MBR, EFI v8 + Vanilla Kernel)

 

(in following sections, if you don't know or not sure, write "unknown")

Motherboard

Manufacturer: ASUS

Motherboard Model:P5KC

Chipset:P35

BIOS Version: , Revision:1001

BIOS setup options: (example: SATA should be set as "native", "AHCI"; Processor - set EIST to "disabled")

SATA ENHANCED. ESATA PATA, EIHC

Audio: Works out of the box? If not, list patches. YES, ALC883 PKG

LAN: Works out of the box? If not, list patches. Attansic L1 Ethernet.pkg (MADE HERE)

SATA & IDE: Works out of the box? If not, list patches.YES (NOT USE JMICRON IDE) BUT EXIST A PATCH BY CHAMALEON

 

Processor

Processor Model:CORE 2 QUAD 6600

Speed: 2.4

Recognized as what in System Profiler: 2.4 UNKNOW (FOUR CPU IN SYSTEM MONITOR AND HPROFILER)

 

Video Card (if you have integrated and PCI/AGP, use this template twice)

What type of card (PCI Express/AGP/Integrated): PCI EXPRESS

NVIDIA/ATI/Intel? NVIDIA

Model: 8500 GS

Memory: 256

Board Manufacturer:XFX

Patches used:NVINJECT 1.52

QE/CI:

All resolutions available? YES

 

Other PCI/PCI-e Components (USB are listed in Other Accessories below)

Wireless/Wired Card (for PCI/PCI-e cards only)

Interface: PCI/PCI-e?

Standard (Wireless only): (example: 801n)

Manufacturer:

Model:

Works? (Y/N, if "Y", list patches)

Patches:

 

Sound Card (this is for PCI/PCI-e cards only - integrated on motherboard is in motherboard section)

Interface: PCI/PCI-e?

Manufacturer: CREATIVE

Model: AUDIGY SZ

Works? (Y/N, if "Y", list patches) N

Patches:?

 

Other Accessories (USB/FIREWIRE)

Type (Webcam, External Sound Card, USB bluetooth dongle, etc.):

Name:FAST TRACK ULTRA

Manufacturer:MAUDIO

Works? (Y/N, if "Y", list patches, if needed) YES

Patches/Work out of the box? YES

[iPhoneTom]

Motherboard

 

Manufacturer: MSI

Motherboard Model: P45 Platinum

Chipset: P45 Express

BIOS Version: 1.1 (needed MultiCore Mod) , Revision: 1.1

BIOS setup options: SATA should be set as ""AHCI"

Audio: Works out of the box? No, needs patch.

LAN: Works out of the box? Yes.

SATA & IDE: Works out of the box? SATA working oob, IDE not sure (no drive to test)

[ptaramelli]

Current OS X Version: 10.5.2

 

Laptop

 

Prebuilt

 

Manufacturer: Dell

Model: Inspiron 6400/E1505

 

Install Methods summary: Kalyway 10.5.2

 

Does EFI and/or the Vanilla kernel work? partitioned as MBR, EFI v8 + Mach Kernel

 

 

Motherboard

Manufacturer: DELL

Motherboard Model: Dell Inspiron 6400/E1505, motherboard Id <DMI>

Chipset: Intel 27A0 rev 3

North Bridge Mobile Intel Calistoga –G i945GM, South Bridge Intel 82801 GBM ICH7-M

BIOS Version: BIOS ID: Phoenix ROM BIOS PLUS Version 1.10 A09-None (09/29/06) BIOS OEM: A09

BIOS setup options: NONE

Audio: Not working. Patched with Sonotone's Build 0.34g (post="http://forum.insanelymac.com/index.php?showtopic=97966"). I doesn't worked with any of the HDAPatchers with a linux dump codec I took myself from Ubuntu. MIC DOESN'T SEEMS TO WORK

LAN: Yes , no patches

SATA & IDE: yes , patches .

 

Processor

Processor Model: Mobile Dual Core Intel core duo T2300E

Speed:1666 Mhz

Recognized as what in System Profiler: Unknown

 

Video Card

What type of card : Integrated

Intel

Model: GMA950

Memory:Unknown

Board Manufacturer:Intel

Patches used:None

QE/CI:

All resolutions available : Only till 1280x800

 

Other PCI/PCI-e Components (USB are listed in Other Accessories below)

 

Wireless

Interface:Unknown

Standard (Wireless only): 802.11g

Manufacturer: Broadcom

Model: Dell Wireless 1390 Wlan Mini-card

Works? YES

Patches: NONE

 

Wired Card

Interface: Unknown

Standard (Wireless only):

Manufacturer:Broadcom

Model:440x 10/100 Integrated Controller

Works? YES

Patches: NONE

 

 

Other Accessories

USB: WORKS ALL

ON USB: KEYBOARD, MOUSE, PRINTER, EXTERNAL HD, ALL WORKING OK

 

Keyboard Microsoft confort curve, Mouse Microsoft wireless, printer HP Officejet 4355 all in One (had mac disk drives in the package)

 

FIREWIRE OK

[vndlsm]

Current OS X Version: 10.5.2

 

Laptop : Toshiba A200 PSAFCA-01H00J

Manufacturer: Toshiba

Model: Satellite A200 PSAFCA-01H00J

 

Install Methods summary: Tested, Kalyway 10.5.2 nothing really worked out of box didnt follow through with any manual atempts, Leo4AallV3 and V2 had more success with then Kalyway however still needed manual attention to wireless/ethernet controller and CPU Fan.

In the end iAtkosV2 worked the best,

Does EFI and/or the Vanilla kernel work? EFI - Works so far

 

Will update motherboard info, - checking CPU Fans

 

Processor

Processor Model: Intel T7400

Speed: 2.16GHZ Core Duo

System profile picks it up 100%

 

 

Video Card

NVIDIA - Driver "Laptop Nvcards" with "GMA 950"

Model: GeForce 7300GO

Memory:128mb

Board Manufacturer:

Patches used: OR GMA 950 (onboard can always be a fail safe)

QE/CI:

 

 

 

Wireless Card

Interface: unknown

Standard: Wireless only

Manufacturer: Atheros

Model: 5006EG

 

USB works out of the box

 

Sound Card

Use http://forum.insanelymac.com/index.php?showtopic=63957

 

*UPDATING*

[Skull_Trails]

Motherboard

Make : Intel

Model: Intel s5400 SATA-R

Processors

Processor Model: Intel Xeon 5405

Speed: 2.0 Quad Core

No of Processors : 2

Audio

not working OTB : requires patch (Not yet tested)

LAN

LAN1 : works OTB

Lan 2 : Works OTB

onboard SATA & IDE

6 port SATA : works OTB

IDE : Works OTB

RAID

RAID : not working

Final Cut PRO 6.3

Working perfectly

PCI-Express

Nvidia 8800 GTS : QE and CI working perfectly

[Sed8ed]

Dell Vostro 1200

 

Laptop: Yes, 12.1", 1.9kg, 4 cell/batt, DVD+/-RW 2.0mp, Core 2 Duo 1.4

 

Prebuilt? Y

 

Install Methods summary: Kalyway 10.5.2. Using Vanilla Kernel

* Updated using 10.5.3 comboupdate. *10.5.4 via Apple download..

 

*NOTE NO FAN DURING INSTALL. REMOVE CPU/RAM ACCESS DOOR (all 9 screws)

and place pedestal fan right in front of heat pipe/CPU heatsink..Fan resumes at Welcome screen. Otherwise try another release or enjoy the thermal shutdowns during install.

 

Had trouble with booting in "Welcome loop/Migration"..required me to boot in as root:

 

Type at the prompts:

 

* F8 at boot

* -s

* /sbin/fsck -fy

* /sbin/mount -uw /

* touch /var/db/.AppleSetupDone

* passwd root

" type password "

" Retype Password "

* Type: reboot

 

Upon Rebooting press F8 and type "Graphics Mode"="640x480x32" press return.

(retain inverted commas)

 

You must do it this way...either the root command or graphics command alone is not enough you must do both one after the other. (took a while to figure out)

 

Does EFI and/or the Vanilla kernel work? Yes!! EFI V8 and Vanilla Kernel Work. Sleep kernel works as well...others not tested

 

 

Motherboard

Manufacturer: Dell

Motherboard Model: Intel 965

Chipset: 965/Intel X3100 GPU

BIOS Version: A07

BIOS setup options: Standard...everything on..not very configurable.

Audio: Realtek HD Audio. Works with Taruga's patcher and ALC 268 Codec. Everything is supported/headphones/onboard array mic's, the lot!!! Very easy to get sound working

LAN: Yes!! Requires Modification of AppleYukon2.kext and repair permissions. Must edit the

8055 subsection with device ID 0x02531028

SATA & IDE: AHCI enabled by default...cant turn it off or on. Work Fine. Mines 80GB in size split in half running dual boot and MBR.

 

Processor

Processor Model: Intel Core 2 Duo (sse2,sse3 all the good stuff)

Speed: 1.4ghz 800mhz FSB

Recognized as what in System Profiler: Mac Pro, Core 2 Duo, 1.4ghz 800MHZ

 

Video Card

What type of card: Integrated Intel X3100

Brand: Intel

Model: X3100

Memory: upto 384 MB (runs 144mb in profiler)

Board Manufacturer: Intel

Patches used: Original X3100 on Install DVD but fully supported after update to 10.5.3 and 10.5.4....was software accelerated originally.

QE/CI: YES!! Hardware accelerated and supported appear in System Profiler (works well with flurry as desktop background..)

All resolutions available? On this unit 1280x800 is the max...(looks glorious as screen is truelife)

Wireless/Wired Card (for PCI/PCI-e cards only)

Interface: Mini-PCI

Standard ess only):802.11G B/G

Manufacturer: Dell

Model: Dell 1490 Mini PCI wireless card (Aftermarket purchase not in original config)

Works: The Dell card: Yes!!! The original Intel 3945 A/B/G: No!!

Patches: Only the Broadcom packages from Install DVD for the Dell card.

 

Working Extra's:Webcam 2.0mp (in all applications)

USB Ports (all 3)

Function Keys for Volume +/-

Trackpad

Bluetooth (only if turned on Via Windows if Dual Boot, requires

software switch to enable) Otherwise Nope!!

 

Not Working: Sleep (Did with the sleep kernel not with Vanilla)

Sleep with lid closed (partial, total loss of sound with Vanilla Kext,wakes fast)

Speedstep...NOPE!! Totally not mobile lol...full boar all the time...

PowerManagementBundle doesnt really work but does add a battery icon for % remaining (doesnt report time left)

Fingerprint reader..(seen on the USB bus but the UPEK software doesnt run it)

Summary

It's a great Desktop..(it last's on a 4 cell for 45 mins, maybe 1.5 hours on 6 cell) Works very well and is a good experience (I have used mobile me with it and set up Time machine via my Airport Extreme for backups)...It's snappy and I consider it fully functional just not as a laptop but you cant have it all. If I paid for the CoolBook app I could probably throttle and get some more battery life....

[Lucifire.Luke]

Current OS X Version: 10.5.2

 

Desktop

 

Install Methods summary: Installed using the .iso file burnt the DVD and then installed smoothly

 

Does EFI and/or the Vanilla kernel work? I am a newbie so i dont know which is vanila kernel or the other Sir but it says Darvin OSx in the beginning.

 

(in following sections, if you don't know or not sure, write "unknown")

Motherboard MICRO ATX

Manufacturer: ASUS

Motherboard Model: P5LD2VM - SE

Chipset: INTEL 945

BIOS Version: , Revision: Unknown (Never upadated)

BIOS setup options: Unknown (example: SATA should be set as "native", "AHCI"; Processor - set EIST to "disabled")

Audio: Works out of the box? AC97 Patches from the DVD itself

LAN: Works out of the box

SATA & IDE: Works out of the box

 

Processor Intel

Processor Model: D 805

Speed: 2.66

Recognized as what in System Profiler: 2 CPUs

 

Video Card Yes

What type of card PCI Express

NVIDIA/ATI/Intel? NVIDIA

Model: 7100 GS/GT (Dont know much which is on mine)

Memory: 256 MB

Board Manufacturer: XFX

Patches used: Vesa 3.0 From DVD

QE/CI:

All resolutions available? Yes

 

Other PCI/PCI-e Components Yes PCI Card for the Firewire.

Interface: PCI/PCI-e

Works out of the box

 

 

Problem with Dual monitor System does not accept the second monitor. I dont know where to change the nvcap values as being a newbie

[heshan]

Current OS X Version: 10.5.2

 

Desktop/Laptop? DESKTOP

 

Prebuilt? (Y/N) NO

 

 

Install Methods summary:

 

kALYWAY DVD 10.5.2, SLEEP KERNEL 9.2 AND KABYL 9.2.2 vANILAA NOT WORKING

Does EFI and/or the Vanilla kernel work? (example: partitioned as MBR, EFI v8 + Vanilla Kernel)

EFI 5, VANILLA NOT WORKING

 

(in following sections, if you don't know or not sure, write "unknown")

Motherboard

Manufacturer: ASROCK

Motherboard Model: CONROE D1333-667 R1.0

Chipset: INTEL 945G (I THINK)

BIOS Version: , Revision: 1.0 - 1.3 TESTED

BIOS setup options: HPET ENABLED

Audio: Works out of the box. REALTEK AUDIO HD

LAN: Works out of the box

SATA & IDE: Works out of the box

 

Processor

Processor Model: INTEL CORE 2 DUO 3.0GHZ

Speed: 3.0GHZ

Recognized as what in System Profiler: SYSTEM PROFILER ABORTS

 

Video Card (if you have integrated and PCI/AGP, use this template twice)

What type of card : PCI-E

NVIDIA/ATI/Intel? NVIDIA

Model: NVIDIA 7600GT

Memory: 512MB

Board Manufacturer: NVIDA OWN MAKE

Patches used: NIL

QE/CI: AVAILABLE VIA OSX86 TOOLS

All resolutions available? DVI ONLY VIA A DVI2VGA ADAPTER FRO DUAL MONITOR, VGA OUT OF THE BOX

 

Video Card RECENTLY USED BUT REPLACED BY THE ABOVE

What type of card : PCI-E

NVIDIA/ATI/Intel? NVIDIA

Model: ASUS 6600GT

Memory: 128MB

Board Manufacturer: ASUS

Patches used: NIL

QE/CI: AVAILABLE VIA OSX86 TOOLS

All resolutions available?

 

Other PCI/PCI-e Components PCI-1 X1 SLOT HAS A SIL 3132 SATA CONTROLLER, OUT OF THE BOX

Wireless/Wired Card (for PCI/PCI-e cards only)

Interface: PCI/PCI-e?

Standard (Wireless only): (example: 801n)

Manufacturer:

Model:

Works? (Y/N, if "Y", list patches)

Patches:

 

Sound Card (this is for PCI/PCI-e cards only - integrated on motherboard is in motherboard section)

Interface: PCI/PCI-e?

Manufacturer:

Model:

Works? (Y/N, if "Y", list patches)

Patches:

 

Other Accessories (USB/FIREWIRE)

Type GENERIC EBAY BOUGHT USB X5 AND FIREWIRE X2 PCI CARD

Name: ?

Manufacturer: ?

Works? (Y/N, if "Y", list patches, if needed) USB WORKS, FIREWIRE SETS UP BUT DOESN'T RECOGNISE MY SONY DV CAMERA PCR-120 DV

Patches/Work out of the box? NO SOLUTION YET

 

 

TRYING TO ALTER NVCAP FOR NON-DV12VGA ADAPTER DUAL SCREEN SUPPORT BUT NO SUCCESS YET.

[AzN_DJ]

Desktop/Laptop?

Desktop

 

Currently running Leopard 10.5.4

Prebuilt? (Y/N)

NO - Custom made

 

Install Methods summary: Boot-132 install disk - In other words, EFI emulation and direct install, out of the box.

 

Does EFI and/or the Vanilla kernel work? EFI works, Vanilla kernel works

 

Motherboard

Manufacturer: Asus

Motherboard Model: P5KPL-CM

Chipset: Intel G31

BIOS Version: Unknown

BIOS setup options: Unknown

Audio: On board does not work yet.

LAN: Not working - AttansicL1

SATA & IDE: Sata works out of box, no idea about IDE as I do not use IDE.

 

Processor

Processor Model: Q6600 Intel Core 2 Quad.

Speed: 2.4Ghz x 4

Recognized as what in System Profiler: Unknown 2.4Ghz

 

Video Card

What type of card: PCI express

NVIDIA/ATI/Intel: Nvidia Geforce4

Model: MSI QX6600 ??

Memory: 256mb I think

Board Manufacturer: MSI

Patches used: NVInject

QE/CI: huh?

All resolutions available?: Yes, under NVInject

 

Other PCI/PCI-e Components

Wireless/Wired Card (for PCI/PCI-e cards only)

Interface: PCI

Manufacturer:Realtec

Model: unknown

Works? Y

Patches: Out of Box

 

Sound Card (this is for PCI/PCI-e cards only - integrated on motherboard is in motherboard section)

Interface: USB

Manufacturer: Logitech

Model: USB headset

Works? Yes!

Patches: None - Out of Box

 

Other Accessories

Type : Bluetooth

Name: Bluesoil

Manufacturer:Bluesoil

Works? Y

Patches/Work out of the box? Work out of box

[lookingson]

OSX 10.5.3

 

Extensa 5620z

 

Prebuilt? Y

Manufacturer: Acer

Model: Extensa 5620Z

 

Install Methods summary:

 

Leo4allv3

partitioned as MBR, EFI v8 + Vanilla Kernel

kalyway update 10.5.3

(also Apple Update to 10.5.4 works)

 

Motherboard: Intel

Manufacturer:

Audio: Works out of the box

LAN/Wlan Not Working!!! - only USB Dongle helps...

SATA & IDE: Works out of the box

 

Processor

Processor Model:Intel T2310

Speed:1,46 GHz

Recognized as what in System Profiler:

Intel C2D

Video Card : Intel X3100

All resolutions available?

 

Wireless/Wired Card (Hell, no it isnt working! Please Help! Atheros Card)

 

Sound all working

 

_______________________

 

I got the Problem, that I cannot get the Wifi working... I tried with 10.4.5 kexts, but nothing helps. Also tried 10.5.4 Update, works fine, everything works but the wifi... atheros AR6EG... 168c:001c

 

would be nice if someone could help Thanx Lookingson

[Mietas]

Current OS X Version: 10.5.4

 

Laptop

 

Prebuilt? Yes

Manufacturer: Acer

Model: Extensa 5220

 

Install Methods summary: Kalyway 10.5.1 + Netkas PC_EFI v8

Kalyway 10.5.1 GUID + Netkas PC_EFI v8

Kalyway 10.5.1 + Chameleon EFI

Kalyway 10.5.1 + Apple Combo Update 10.5.4 + Chameleon EFI

 

partitioned as MBR, Chameleon EFI + Vanilla Kernel

 

Motherboard

Manufacturer: Unknown

Motherboard Model: Unknown

Chipset: Intel GL960

BIOS Version: , Revision: Unknown

BIOS setup options: SATA is set to IDE (works on AHCI)

Audio: Works with Taruga Patcher + patched AppleHDA.kext

LAN: Partially working, after connecting cable Hackintosh freezes.

WLAN: Works out of the box

SATA & IDE: Works out of the box

 

Processor

Processor Model: Celeron M 540 (SSE3, 64-bit)

Speed: 1.86 GHz

Recognized as what in System Profiler: Yes, in Kalyway 10.5.1 with ToH kernel, with vanilla is not recognized

 

Video Card

What type of card (PCI Express/AGP/Integrated): Integrated

NVIDIA/ATI/Intel? Intel

Model: GMA X3100

Memory: 128MB

Board Manufacturer: Intel

Patches used: Natit.kext by Paulicat or LaptopDisplay.kext to get work the internal display

QE/CI: Yes

All resolutions available? Yes

 

Other Accessories (USB/FIREWIRE)

Type: USB Bluetooth Dongle

Name: no-name

Manufacturer: Unknown

Works? Yes

Work out of the box

[kulos]

Current OS X Version: 10.5.4

 

Desktop

 

Prebuilt? Yes

Manufacturer: HP

Model: dc7100 sff

 

Install Methods summary: Leo4all v3 10.5.2, 9.2.0 speedstep kernel, updated with 10.5.3 Combo Update Fixed v1.4b and 10.5.4 delta update both by Mysticus. Currently 9.4.0 Modbin Kernel and System.Kext.

 

Does EFI and/or the Vanilla kernel work? Both 9.2.0 ToH speedstep and 9.4.0 Modbin for AMD and Intel works (http://www.infinitemac.com/940-modbin-kernel-for-amd-intel/)

 

(in following sections, if you don't know or not sure, write "unknown")

Motherboard

Manufacturer: HP

Motherboard Model: unknown

Chipset: Intel 915

BIOS Version:unknown , Revision:unknown

BIOS setup options: Disable onboard Ethernet

Audio: AppleAC97 from install DVD

LAN: Onboard BCM5751 doesnt work - Disabled. Added in PCI Realtek 8139 - works OOB

SATA & IDE: Installed ICHx driver from leo4all DVD, dont know if nessecary

 

Processor

Processor Model: P4 HT 3.2GHz

Speed: 3200Mhz

Recognized as what in System Profiler: Intel® Pentium® 4 CPU

 

Video Card (if you have integrated and PCI/AGP, use this template twice)

What type of card (PCI Express/AGP/Integrated): Integrated

NVIDIA/ATI/Intel? Intel

Model: GMA900

Memory: Shared

Board Manufacturer: HP

Patches used: Doesnt work with Leopard. Works with GMA900 Patches in Tiger

QE/CI: in Tiger: yes

All resolutions available? in Tiger: yes

 

What type of card (PCI Express/AGP/Integrated): PCI Express

NVIDIA/ATI/Intel? Nvidia

Model: 7200 GS

Memory: 256MB

Board Manufacturer: XFX

Patches used: NVinject 0.2.1

QE/CI: yes/yes Hardware Accelerated

All resolutions available? yes

 

Other PCI/PCI-e Components (USB are listed in Other Accessories below)

Wireless/Wired Card (for PCI/PCI-e cards only)

Interface: PCI/PCI-e?

Standard (Wireless only): (example: 801n)

Manufacturer:

Model:

Works? (Y/N, if "Y", list patches)

Patches:

 

Sound Card (this is for PCI/PCI-e cards only - integrated on motherboard is in motherboard section)

Interface: PCI/PCI-e?

Manufacturer:

Model:

Works? (Y/N, if "Y", list patches)

Patches:

 

Other Accessories (USB/FIREWIRE)

Type (Webcam, External Sound Card, USB bluetooth dongle, etc.):

Name:

Manufacturer:

Works? (Y/N, if "Y", list patches, if needed)

Patches/Work out of the box?

[mychris]

Current OS X Version: Kalyway 10.5.2

Install method: KALYWAY 10.5.2 -> 10.5.3 Combo Update -> 10.5.4 official update

Type: Laptop

Model: Packard Bell SB85 P051W

CPU: Core 2 Duo 1.66 GHz

Memory/DDR: 3Gb 1 Ghz + 2Ghz DDR2 667

Motherboard Chipset: i945GM

SATA: Work, no patches required

USB: Work, no patches required

Audio: Work, no patches required

LAN: Work, change device ID in AppleYukon.kext and manually load this extension (Marvell Yukon Fast Ethernet 8036)

WiFi: No (Intel 3945abg)

FireWire: Work, no patches required

Express Card: Work, no patches required

Video Primary:

Manufacturer: nVIDIA

Model: GeForce 8600 M GS

Bus Type: PCIe x16

Memory size: 256Mb

QE/CI working: Yes but lost after update 10.5.3 .Install nvinstallerv52.pkg OK

Resolution changeable: Yes

[gokosan]

Current OS X Version: 10.5.2

 

Desktop/Laptop?

Desktop

 

Prebuilt? (Y/N) no

(If prebuilt then add following information, otherwise fill the Motherboard:)

Manufacturer: custom built

Model: unknown

 

Install Methods summary: Kalyway 10.5.2 intel_amd

 

Does EFI and/or the Vanilla kernel work? vanillakernel / sse2 jas patch not sure about EFI...

 

Motherboard

Manufacturer: MSI

Motherboard Model: P35 Neo3

Chipset: P35

BIOS Version: , Revision: 1.2

BIOS setup options: SATA "AHCI"; Processor - set EIST to "disabled"

Audio: Works out of the box - Realtek ACL888

LAN: Works out of the box - Realtek 8111B

SATA & IDE: Both Works out of the box

 

Processor

Processor Model: Intel Core2 Duo E6750

Speed: 2.66 Ggz

Recognized as what in System Profiler: Intel Core2 Duo

 

Video Card (if you have integrated and PCI/AGP, use this template twice)

What type of card (PCI Express/AGP/Integrated):

NVIDIA/ATI/Intel? NVidia

Model: 8800GT

Memory:500mb

Board Manufacturer:Palit

Patches used: installed nvinject v.41

QE/CI: Yes

All resolutions available? Yes

 

during dvd boot has to use cpus=1

during install , in custom install select vanillakernel, SSE2 patch, in audio leave as is, in video select nothing, lan leave as is....

[nickhe]

Current OS X Version: 10.5.2

 

Desktop/Laptop?

Desktop

 

Prebuilt? (Y/N) NO

Manufacturer: HP

Model: DC7100

 

Install Methods summary: Kalyway 10.5.2 intel_amd

 

Does EFI and/or the Vanilla kernel work? vanillakernel / yes 9.40 kernel modbin sse3

 

Audio: Works out of the box - ac97

LAN: Works out of the box - broadcom 5721 need to disable during install

SATA & IDE: Both Works out of the box

 

Processor

Processor Model: Intel Pentium 4

Speed: 3.6 Ghz

Recognized as what in System Profiler: Intel Pentium 4

 

Video Card (if you have integrated and PCI/AGP, use this template twice)

What type of card (PCI Express/AGP/Integrated):

NVIDIA/ATI/Intel? NVidia and gma900

Model: 8500GT

Memory:1gb

Board Manufacturer:XFX

Patches used: installed nvinject v.41

QE/CI: Yes

All resolutions available? Yes

[Komano]

Current OS X Version: 10.5.2

 

Desktop/Laptop?

Desktop

 

Prebuilt? (Y/N) No

(If prebuilt then add following information, otherwise fill the Motherboard:)

Manufacturer: custom built

 

Install Methods summary: Kalyway 10.5.2 intel_amd

 

Does EFI and/or the Vanilla kernel work? Not Sure About this, i just installed default options

 

Motherboard

Manufacturer: DFI

Motherboard Model: LP DK P35 T2RS

Chipset: P35

BIOS Version: UnSure

BIOS setup options: Default Bios Options

 

Audio: Works out of the box, Coaxial and Optical SPDIF Not Working - Realtek ACL885

LAN: Works out of the box - Marvell 88E8053 PCIE Gigabit LAN

SATA & IDE: Both Works out of the box

 

Processor

Processor Model: Intel Core2 Quad 6600

Speed: 2.4 Ggz

Recognized as what in System Profiler: Not Sure

 

Video Card (if you have integrated and PCI/AGP, use this template twice)

What type of card (PCI Express/AGP/Integrated):

NVIDIA/ATI/Intel? NVidia

Model: 8800GT

Memory:500mb

Board Manufacturer:XFX

Patches used:not sure

QE/CI: not sure

All resolutions available? No

 

 

I had problems installing kalyway 10.5.2 on this board before i resetted the bios settings then the install went fine.

[KibosJ]

Current OS X Version: 10.5.2

 

Desktop/Laptop?

Desktop

 

Prebuilt? Yes

Manufacturer: Gigabyte GA-MA790FX-DS5

 

Install Methods summary:

Zephyroth 10.5.2

TOH 9.2.0 Kernel

LAN Drivers

nVIDIA Drivers

EFI

 

Does EFI and/or the Vanilla kernel work? EFI Works

 

Motherboard

Manufacturer: Gigabyte

Motherboard Model: GA-MA790X-DS5

Chipset: AMD 790FX

BIOS Version: F6

BIOS setup options: Set SATA as AHCI

 

Audio: Works with ALC889A Patch

LAN: Works

SATA & IDE: SATA Works, IDE Needs ATI SB600 Patch

 

Processor

Processor Model: AMD64 Athlon X2 5600+

Speed: 2.8GHz

Recognized as what in System Profiler: AMD Athlon 64 X2 Dual Core Processor 5600+

 

Video Card

What type of card: PCIe

Make: nVIDIA

Model: 8500GS

Memory:512mb

Board Manufacturer: eVGA

Patches used: Ones on Disc

QE/CI: Not Sure

All resolutions available? Yes

 

Patches:

SB600 Patch to make IDE Devices work (DVD-Writer in my case)

ALC889A Patch to make Audio work (Speakers, Head Phone, Line Output, Digital Output, Mic Input, Line Input)

[sailor070]

Current version: 10.5.2

 

Desktop/Laptop? Desktop

 

Prebuilt? Y

Manufacturer: Qmotion (bought at MediaMarkt)

Model: Silverline 2800

 

Install Methods summary: just installed Kalyway 10.5.2 Intel AMD

 

Does EFI and/or the Vanilla kernel work? Vanilla kernel works

 

Motherboard

Manufacturer: foxconn

Motherboard Model: G31MX

Chipset: Intel G31

BIOS Version: ??

BIOS setup options: ??

Audio: On-board audio OUT works OOB (audo IN I'm not sure; jack-sensing does not work)

LAN: On-board Realtek RTL8111B/8111C Gigabit works (rtl_r1000_nic_ext): OOB

SATA & IDE: SATA SAMSUNG HD250HJ: OOB

 

Processor

Processor Model: Intel Core 2 Quad Q6600 (4 cores detected)

Speed: 2.4Ghz

Recognized as what in System Profiler: 2.4Ghz

 

Video Card

What type of card (PCI Express/AGP/Integrated): Integrated

NVIDIA/ATI/Intel? Intel Integrated

Model: GMA3100

Memory: 64MB

Board Manufacturer: INTEL

Patches used: none

QE/CI: NO

All resolutions available? 1280x1024x32 /Library/Preferences/SystemConfiguration/com.apple.Boot.plist edited, no further patch

 

Video Card (added)

What type of card (PCI Express/AGP/Integrated): PCI Express

NVIDIA/ATI/Intel? NVIDIA

Model: DeForce 8400 GS

Memory: 256MB

Board Manufacturer: Sweex

Patches used: NVinject

QE/CI: YES

All resolutions available? YES

 

Other Accessories (USB)

Type: USB dongle

Name: MicroMate

Manufacturer: SanDisk

Works? (Y/N,) Y

Patches/Work out of the box? OOB

 

Other Accessories (USB)

Type: iPod

Name: shuffle 1GB

Manufacturer: Apple

Works? (Y/N,) Y

Patches/Work out of the box? OOB

 

Other Accessories (USB)

Type: USB Sound Dongle

Name: SL-8850

Manufacturer: SpeedLink

Works? (Y/N,) Y

Patches/Work out of the box? OOB (input and output are working fine)

 

Other Accessories (USB)

Type: USB WLAN Adapter 54g

Name: WL-169 v1 001

Manufacturer: Sitecom

Works? (Y/N,) Y

Patches/Work out of the box? OOB with RTL-8187B driver downloaded from http://www.realtek.com.tw/downloads/

[JAvenger007]

Install: Kalyway ISO DVD 10.5.2 Leopard

Motherboard: Asus M3N32-SLI

Memory: 4 GB OCZ Platinum 800mhz

Processor: AMD 6400 Black Edition

Video: EVGA 8800 GT KO (512mb) Supports full rez 1680x1020

Drives: IDE 320 GB

Sound: Onboard

 

Working: Almost everything. Easy install as is.

To Test: Time Machine, SATA, Ethernet, Email Sync, Overall Stability

 

Notes: Saw 2 random lockups shortly after install. Once during initial "easy setup" (picking languages, settings, ect in the wizard), and again with dashboard. Could be fluke? Installed first AMD patch from Kalyway and worked.

 

Tried this setup initially and no luck yet:

Asus M3NHT Deluxe

AMD Phenom 9850

4gb OCZ memory

onboard 8500GT graphics

-Would start to run install DVD and then during POST would go black and then restart. Haven't tried with 8800 installed, as it seems graphics related.

[wookiejedi]

Desktop

 

Prebuilt? N

 

Install Methods summary: (List all methods tested, check preferred method - the one you are writing about now)

Kalyway 10.5.2, speedstep kernel, custom install

Tried iaktos 2.0i, iatkos4, and Leo4allv3 and Leo4allv4 beta, but never got any but kaly to work

Note initially I used a IDE DVD drive on cable select and always got the "waiting for root" problem until I jumpered it to master

 

Does EFI and/or the Vanilla kernel work? (example: partitioned as MBR, EFI v8 + Vanilla Kernel)

Partioned as GUID, have not tried vanilla kernel yet

 

Update:

EFI works

I tried every kernel on Leo4all & Iatkos releases, and each one froze in a different place. Only Kalyway 10.5.2 with speedstep was successful.

Tried vanilla kernel with a normal apple update and got kernel fauls...looks like "combo" updates for me for now.

 

(in following sections, if you don't know or not sure, write "unknown")

Motherboard

Manufacturer: evga

Motherboard Model: nForce 650i Ultra

Chipset: nforce

BIOS Version: Phoenix Award Bios , Revision: 6.00PG

 

BIOS setup options: Took a bit of tweaking to find what works:

Here are what I think are most of the changes I made from factory default. If you happen to have the same board and run into trouble, ping me and I may respond with my full bios settings. (I don't log in often, so it could be a awhile).

 

Standard CMOS: no changes

Advanced Bios Features: CPU Internal Cache enables, APIC Enabled, MPS Version Control for OS 1.4

Advanced Chipset Features: System Bios Cacheable Disabled, Video RAM Cacheable Disabled, HPET Function Enabled, NVIDIA GPU EX Enabled

Under Advanced Chipset CPU Configuration:

Limit CPUID MaxValue Disabled, Intel SpeedStep Disabled, Exceute Disable Bit Enabled, Both cores enabled

Integrated Peripherals: All enabled except RAID (it could work, I just didnt try it, only one SATA hard drive)

 

 

Audio: Works out of the box? Yes. AlthoughI did a custom install, I did not change the default driver selections for audio.

 

LAN: Works out of the box? No, not yet. I added the Marvel, and nforce and forcedeth drivers on the custom install. Ethernet is detected but always shows cable unplugged.

I'll try some patching and post any new findings.

 

Update:

I tried 5 vatiations of the forcedeth drivers, but the best I could get was "ethernet cable not plugged in". I put in a 3Com905 series PCI card and it was instantly recognized. I did disable onboard MAC LAN in bios before booting with the new card.

 

SATA & IDE: Works out of the box? Yes, however I have SATA raid disabled, so unknown if it works.

 

Processor

Processor Model: Intel Pentium Dual Core E2200 2.2Ghz 1MB 800Mhz

Speed: 2.2Ghz

Recognized as what in System Profiler: Intel 2.2 Ghz Intel Core 2 Duo

 

Video Card (if you have integrated and PCI/AGP, use this template twice)

What type of card (PCI Express/AGP/Integrated):

NVIDIA/ATI/Intel? Nvidia

Model: 8400GS

Memory: 512MB

Board Manufacturer: XFX

Patches used: Used NV Inject 512 from custom install

QE/CI:

All resolutions available? Yep

[limanemin]

Current OS X Version: 10.5.2

 

Desktop:Emachine T6542

 

Prebuilt? Yes

 

 

Install Methods summary: Kalyway install disc.

 

Does EFI and/or the Vanilla kernel work? yes, EFI and Vanilla not tested. BOOT.EFI.V80

 

(in following sections, if you don't know or not sure, write "unknown")

Motherboard:C51PVGM-M

Manufacturer:ECS

Motherboard Model: ???

Audio: No audio. ALCInject.kexk

LAN:Onboard LAN

• Realtek RTL8100C 10/100 Mbps Fast Ethernet Controller

SATA & IDE: SimplyBurns (From Kalyway install Cd, Burn (from Sourceforge), Toast freezes the system when burning DVD however Disk Utilities Burner burns without freezing system.

 

Processor: AMD Athlon 64 3500+

 

Processor Model:

Speed: 2.2

Recognized as what in System Profiler: Unknown

 

 

NVIDIA/ATI/Intel?: Nvidia

Model:8600gt (Upgraded by me for Mac otherwise it has a onboard video card also but without this card it was taking about 5 min to boot after upgrade it takes less than a minute

Memory: 256mb for video and i also add 2 GB system memory also.

Board Manufacturer: XFX

Patches used:NVinject 0.2.0 from Install DVD

QE/CI:yes and yes

All resolutions available? yes

 

 

USB work fine. PS/2 Mouse or keyboard no response after i upgraded to

 

NOTES ON EXPERIENCE: Before i upgraded my Video card i did well above 15 install on board vido was making everything very slow i upgrade it with 256 mb xfx gtXXX and i also upgraded my power adapter because video card was asking min 400 watt source. Before my video card my PS/2 mouse and keyboard was working fine in some installation and not working in some installations. I bought a $2.95 deal inland USB keyboard from Microcenter and exchange my wireless USB Mouse from my labtop. Currently it boot faster than my XP and System respons is very fast. It is a dual boot by using Mac's boot manager /program Mac found my XP PRo and if i do F10 i can go to boot options and select HD then XP or if wait and skip F10 screen then it boots and ask me if i have any option if i hit any button it gives me XP or MAc option.

I hope it helps someone.