Hardware Compatibility List - Leopard 10.5.2

[moose232]

Current OS X Version: 10.5.5 (iATKOS_5i)

 

Laptop

 

Prebuilt: Y

Manufacturer: Dell

Model: XPS M1710

 

Install Methods summary:

1) Disable multi core in the BIOS or use cpus=1 as a boot option (this will be fixed post install)

2) Go into disk utility and create a Mac OS Extended (Journaled) with a GUID partition table.

3) Customise and select: PCI EFI V9, AppleDecrypt, SMBIOS-EFI Air, x86 ACPI, Remove power management, OHR, Remove thermal kexts, Nvinject Go (see notes to find it), Intel SATA, Intel speedstep a and laptop battery.

 

Known issues: Graphics hardware acceleration does not appear to work reliably (see below for details)

 

Does EFI and/or the Vanilla kernel work? Vanilla kernel used

 

Motherboard

Manufacturer: Dell

Motherboard Model: Unknown

Chipset: Unknown

BIOS Version: Unknown , Revision: Unknown

BIOS setup options: Disable multi core or use cpus=1 option when booting pre-patch

Audio: Sigmatel 9200. Needs patch. Follow: http://www.hackint0sh.org/forum/showpost.p...amp;postcount=6 but instead of using dump 9250, use dump Sigmatel9200.txt which you can get here http://psykopat.free.fr/apple/AppleHDA/sigmatel/

LAN: (VendorID: pci14e4, DeviceID: 1600) BCM5752. Needs driver (See Insanely mac: http://forum.insanelymac.com/index.php?sho...4987&st=560 Post #584)

SATA & IDE: SATA, tick Intel SATA during the installation.

 

Processor

Processor Model: Core 2 DUO

Speed: 2.33

Recognized as what in System Profiler: 2.33 Intel Core 2 Duo (after patching)

Notes: To get Dual core support you must apply a kernel patch. You must know which kernel version you have in order to get the correct patch. Use the "hostinfo" command in terminal to find out. For the patch download link see:

http://forum.insanelymac.com/index.php?s=&...st&p=833339

For instructions on applying the patch see:

http://forum.insanelymac.com/lofiversion/i...php/t11890.html

After all that, you should probably also add the tscsync command into apple boot (/Library/Preferences/SystemConfiguration/com.apple.Boot.plist) under Kernel Flags

 

Video Card

Integrated

NVIDIA

Model: Geforce GO 7950GTX

Memory: 512

Board Manufacturer: Unknown

Patches used: Nvinject for GO 512MB mobile cards

QE/CI: Not out of the box, needs patch:

 

Note: I did not find this to be 100% reliable and it would not work at all with a secondary DVI display + crashed on reboot with a secondary VGA display):

 

Manual nVidia installation, Guide for all nVidia boards (followed the top and section for Geforce 7000 series). If you have a Geforce 7950 Go GTX you can use "0x029710DE" as the device ID.

http://forum.insanelymac.com/index.php?showtopic=111072

 

If you have a Geforce 7950 Go GTX you can use my NVCAP value which is:

(Recommended: Use this if you are using property list editor)

04000000 00001900 02000000 00000007 00000000

or as base64 (use if you are editing with a normal text editor):

BAAAAAAA GQACAAAA AAAABwAA AAA=

 

Details about NVCAP if you have a different graphics card

Otherwise either see

a) http://forum.insanelymac.com/index.php?showtopic=103549

or

(Easier) Getting NVCAP by dumping your graphics cards ROM

http://forum.insanelymac.com/index.php?s=&...st&p=753771

Notes: You have to run the nvflash utility from DOS so its probably easiest to either boot off a USB stick or use something like Hirens boot CD and then load the USB drivers to access all of your tools.

 

All resolutions available? Yes + can use an external display (providing you don't patch i.e. no QE/CI).

 

Other PCI/PCI-e Components (USB are listed in Other Accessories below)

Wireless/Wired Card

Interface: Integrated

Standard (Wireless only): 8021g

Manufacturer: Intel

Model: 4965AGN

Works? N

Patches: Some work has been done but driver is currently not working. See http://code.google.com/p/iwidarwin/ for details.

 

Other Accessories (USB/FIREWIRE)

Type: USB ports

Manufacturer: Unknown

Works? Y

Works out of the box: Y

 

Type: USB bluetooth dongle

Type: USB

Manufacturer: Belkin

Model: F8T008

Works? Y

Works out of the box: Y

 

Notes

You may find the "Dell Laptops Post-installer" useful although I have not used it. See:

http://forum.insanelymac.com/index.php?showtopic=97966

[amador]

Current OS X Version: Kalyway 10.5.2 DVD Intel_Amd (sse2/sse3) EFI V8

Desktop/Laptop? : DESKTOP (GENERIC)

 

Prebuilt? (Y/N) No

 

Install Methods summary:Kalyway 10.5.2 DVD Intel_Amd (sse2/sse3) EFI V8

-burned to dvd-r 16x at the minimum speed of 8x via (power iso)

 

 

MOTHER BOARD: ECS BLACK SERIES A780GM-A V1.0 ATX FORM FACTOR

CHIPSET : AMD 780G & SB700

PROCESSOR : AMD X2 6000+ ATHLON PROCESSOR 3.1 GHZ 1MB L2 CACHE

MEMORY MODULE : 2X 1GB A-DATA 1066TW EXTREME CL5

ONBOARD DISPLAY : ATI HD3200 .I AM USING HDMI DISPLAY,INTEAD OF USING VGA SLOT.

HARD DRIVE : 1 SATA 500GB SEAGATE, MASTER BOOT RECORD FORMATED(MAC OS JOURNALED)

: 1 IDE 500 GB SEAGATE,FORMATED (MS DOS)

MONITOR : SONY VAIO 15" LCD I USE DVI TO HDMI ADAPTOR

 

ADDED HARDWARE AFTER INSTALLATION: 1 USB AUDIO ADAPTER ,1 PCI LANCARD (REALTEK RTL8139D)

because internet wont connect and audio problem appearing on screen everytime boot -v.

i have read on some reply's on this site that trying to add extra lan card would jump/pass the Do you Already Own a Mac..i tried that..

 

Does EFI and/or the Vanilla kernel work? VANILLA KERNEL WORKS

 

(in following sections, if you don't know or not sure, write "unknown")

Motherboard ECS A780GM-A

Manufacturer: ELITEGROUP

Motherboard Model: BLACK SERIES

Chipset: AMD 780G /SB700

BIOS Version: Revision: BIOS for A780GM-A (PCB:1.x) VERSION :08/11/06

 

BIOS setup options: it should auto detect all connected stuff like dvd/hdd.

Advance setup options: HT frequency in auto

: CPU vitualization Enable

: AMD C&Q Enable

:APIC Mode Enable

Removable device options: 1st drive floppy drive

Advance chipset Setup option :DRAM frequency AUTO

:DRAM timing mode AUTO

:Share memory detection AUTO

:HDMI AUDIO DISABLE

Integrated Peripheral options :Onboard IDE / SATA ENABLED

: SATA configuration AHCI

:Onboard audio enabled

:Onboard LAN function enabled

:Serial port1 address DISABLED

:USB FUNCTION/LEGACY SUPPORT ALL ENABLED

Powert Management :ACPI suspend type S3(STR)

 

PCI/PNP SETUP :PCI

 

SAVE AND EXIT.

 

 

ADDED PROGRAMS AND RUNNING:

 

MAC OFFICE 2008 REGISTERED

TOAST 8 REGISTERED

ADOBE DESIGN PREMIUM CS3 REGISTERED

SKYPE 3.0

TRANSMISSION 1.06

ADIUM

MAC THE RIPPER

YAHOO

VLC

PERIAN: ADDED SO THAT I CAN WATCH ALL VIDEO FORMAT VIA QUICKTIME

[OB/GYN Kenobi]

Current OS X Version: 10.5.5

Desktop Prebuilt? (No)

Install Methods summary: Kalyway, vanilla, ATi NATIT +

Retail 10.5.4 with post patch

http://forum.insanelymac.com/index.php?showtopic=135948

http://www.mediafire.com/file/dmmham9hmxd/...etail-guide.zip

 

 

Motherboard

Motherboard Manufacturer: Gigabyte

Motherboard Model: GA-EP45-DS3L

BIOS Version: F08

BIOS setup options: AHCI enabled

Audio: Working 100% (7.1 HD and Line/Mike) with

AppleHDAPatcherv1.20 + ALC888.codec.txt

Kext Helper b7 + AppleHDA.kext and HDAEnabler.kext

LAN: On board works (not sure if this is oob or because of ep45-post-patch.s)

SATA: yes

IDE: yes

 

 

Processor

Processor: Intel Q9300 (clocked to 3.38 GHz on 1800 FSB) runs hot (near intel limits of 71.4 C under folding@home load)

Recognized in System Profiler as: Unknown but reports correct speed

 

 

Video Card

Type of card: PCIe x16

Model: ATI 2400 HD 512

works, after patch with EFI Studio

All resolutions available ?: Yes

 

Other Components

Memory: 2GB (Fully Working)

Optical Drive: Pioneer 107 ATA (burn tested); Sony BD-ROM BD-5100S (SATA)

Hard Drives: WD 640 SATA (startup), 2x Seagate 500 (softraid), IDE Maxtor 250 (windows boot)

Keyboard: Macally ikey Slim USB

Mouse: Microsoft Intellimouse USB

 

Sleep, Shutdown, Reboot Works with patch

 

System Profiler working correctly.

 

Quartz graphics enabled with this utility

http://######.com/index.php?option=...1&Itemid=48

[Kolbet]

Kylaway Leopard 10.5.2 is working on

ASUS P5KPL-CM but needs additional video card (built in is not working), i have ATI HD2600XT and i had to select drivers during installation (No select-no visual after).

With IDE drives and SATA Dvd rom - fine.

No bulit-in ethernet, but i have separate pci card.

 

Its very, very stable.

 

Failed on trying update

[drapple]

=== Amilo Pro 3205V ===

Work Full, but only the Intel Wlan 3945 and the Soundcard input-devices works.

 

* Install method: IATOKS 5i, XxX_10.5.6, and more...

* No changes to bios

* sleep working fine

* Bluetooth working with a BT Mouse and Keybord, but a Headset dosen't working ?

* USB works fine

* Keyboard function keys work

* LCD panel function keys worket't great (out of the box!)

* Graphics works with Leopard Graphics Update with OSX86Tools, external monitor works in dual monitor and secend monitor modus!

* Intel Wireless 3945ABG not working

* Intel ethernet card working

* USB workeing gread

* Battery indicator working - charges fine

* PCMCIA not tested yet - should work with http://forum.insanelymac.com/index.php?showtopic=81036

* SD card reader not working (yet)- http://forum.insanelymac.com/index.php?showtopic=81036 .

[hkfifo]

Current Os: MacOs 10.5.4

Installation Method: Kalyway 10.5.2 with Vanilla Kernel, then Kalyway 10.5.3 combo update, then Apple 10.5.4 update.

 

Motherboard

Manufacturer: ASUS

Motherboard Model: P5E3 Deluxe Wifi-AP@n

Chipset: X38

BIOS Version: 1303

BIOS setup options: SATA set as "AHCI".

Audio: Mic in, line out, headphone out, digital out. Needs Taruga AD1988b rev4 installer.

LAN: installed both Marvell packages in Kalyway choices. Both Ethernet ports works. Integrated wifi needs some workaround, but I finally got it to work. First I installed all wifi drivers available from kalyway DVD (!), then installed system updates, and then installed Ralink RTUSB D2870-1.2.4.0a driver.

SATA & IDE: SATA drives and optical drives works OOTB, JMicron ATA not tested.

 

Processor

Processor Model: Intel Core2 Quad Q6600

Speed: 2,4Ghz

Recognized as what in System Profiler: Intel Core2 Quad Q6600 (used OsX86Tools)

 

Video Card

What type of card: PCI Express

ATI

Model: Radeon HD3870 oc

Memory: 512MB

Board Manufacturer: MSI

Patches used: Kalyway 10.5.2 Radeon HD3000 driver and white menu fix.

QE/CI: both

All resolutions available

[MAC IN TOSH]

Hi,

 

I have instaled MAC OS X 10.5.2 on my intel PC and everything is working except for 1 thing and that is the 'Boot Camp Assistant'. When I open it, an error message is displayed 'Aplication not supported in this Architecture'. Is there a way to get it in working condition?

[PascalXPProf55]

Hello this is my configuration

 

Prebuilt? Yes

 

Laptop

 

Manufacturer: Fujitsu Siemens

Model: Amilo Li 2727

BIOS: Phoenix -- V1.06

Chipset: GML GL960 -- Intel 82801HBM

Audio: working? -- Yes -- With ALC268 Installer 2

LAN: working? -- Yes -- RTL8139 -- OOB

Required patches etc? -- Yes

 

Install Methods summary:

- iAtkos 4i

- X3100 For GL960 Graphics

 

Does EFI and/or the Vanilla kernel work? -- No

 

CPU

Model Number: Celeron 550

Recognised as: Intel Celeron 550

Speed: 2.00 Ghz

 

Memory: 2GB DDR2 667 (2x1GB Samsung)

 

Video

Manufacturer: Intel

Model: Intel GMA X3100

Dual screen working? -- haven't tried.

QE/CI working? -- Yes -- Resolution changeable? -- Yes.

Required patches or bios flashing? -- no BIOS flashing needed.

 

SATA/IDE working: Both works.

 

Wifi -- No. Atheros 5007EG Doesn't work

 

everything is working except WiFi

 

(original source i used for my install)

 

http://forum.fujitsu-siemens.de/forum/view...129&start=0

[chofete]

Current OS X Version: 10.5.2

 

Desktop/Laptop?

 

LAPTOP

 

Prebuilt?

No,

 

MotherBoard: Asrock P45TS

 

 

Install Methods summary:

 

Tested: Kalyway 10.5.2 : No boot install, stoped after text on the screen.

iAtkos 1.0 : Boot install dvd but Apple screen appears and it remains to infinite and more.

 

iDeneb 10.5.5 : Boot, installs, works only with cpus=1 and Sata mode AHCI

 

Does EFI and/or the Vanilla kernel work? Not tested

 

Motherboard

Manufacturer: Asrock

Motherboard Model: P45TS

Chipset: P45 + ICH10

BIOS Version: Unknown , Revision:

BIOS setup options: SATA MUST BE IN AHCI MODE

Audio: No tested

LAN: No tested

SATA & IDE: Works all fine with SATA in mode AHCI

 

Processor

Processor Model: Core2Duo 6600

Speed: 2,4

Recognized as what in System Profiler: Yes, Mac Pro 3 Core 2 Duo 2,4 4Gb (all i have)

 

Video Card

What type of card (PCI Express/AGP/Integrated):

PCI EXPRESS Nvidia 7900 256mb

NVIDIA/ATI/Intel?

Model: Nvida (ASUS) 7900

Memory: 256

Board Manufacturer: ASUS

Patches used: Nvinject 256

QE/CI: YES

All resolutions available? YES

 

Other PCI/PCI-e Components No tested

Wireless/Wired Card (for PCI/PCI-e cards only)

Interface: PCI/PCI-e?

Standard (Wireless only): (example: 801n)

Manufacturer:

Model:

Works? (Y/N, if "Y", list patches)

Patches:

 

Sound Card (this is for PCI/PCI-e cards only - integrated on motherboard is in motherboard section)

Interface: PCI/PCI-e? FIREWIRE

Manufacturer: MAUDIO

Model: 440

Works? (Y/N, if "Y", list patches)

Patches: Out of the box

 

Other Accessories (USB/FIREWIRE)

Type (Webcam, External Sound Card, USB bluetooth dongle, etc.):

Name:

Manufacturer:

Works? (Y/N, if "Y", list patches, if needed)

Patches/Work out of the box?

[cicyoass]

Current OS X Version: 10.5.6

 

Desktop/Laptop?

Desktop

 

Prebuilt?

No

 

Install Methods summary:

Tested: iDeneb 10.5.4 : Works 90% (sound and network work fine, but graphics don't)

iAtkos 1.0 : Crashes on boot every time, no exception.

iPC 10.5.6 w/ PPF1 and PPF2: Boot, installs, Works same as iDeneb

 

Does EFI and/or the Vanilla kernel work? Not tested

 

Motherboard

Manufacturer: Biostar

Motherboard Model: MCP6P-Ms

Chipset: NVIDIA GeForce 6150 / nForce 430

BIOS Version: Unknown , Revision:

BIOS setup options: Default works fine

Audio: Working 100% with AppleAzaliaAudio

LAN: Tried forcedeth and forcedeth-V, neither work at all

SATA & IDE: Both SATA and IDE work 100%

 

Processor

Processor Model: AMD Athlon 64 LE-1600

Speed: 2.2GHz

Recognized as what in System Profiler: 2.2 GHz Unknown (iDeneb), 3 GHz Intel Core Solo (iPC 10.5.6)

 

Video Card

What type of card (PCI Express/AGP/Integrated): PCI Express

NVIDIA/ATI/Intel? NVIDIA

Model: 9500GT

Memory: 512MB

Board Manufacturer: Galaxy

Patches used: NVdarwin 1.2.3 kext, NVIDIA 9000 Series Driver v2 from here, and the 10.5.5 OpenGL Framework.

QE/CI: 100%

All resolutions available? 100%

 

Other PCI/PCI-e Components No tested

Wireless/Wired Card (for PCI/PCI-e cards only)

Interface: PCI

Standard (Wireless only): 802.11n Draft 1

Manufacturer: Encore

Model: ENLWI-N

Works? (Y/N, if "Y", list patches)

Patches: Works 100% with official rt2860 driver from Ralink.

[surf1080]

Current OS X Version: 10.5.2

 

Laptop

 

Not Prebuilt

Manufacturer: Acer

Model: Aspire 3003WLCi

 

Install Methods summary:

used sleep kernel via Kalyway 10.5.2 installation

Customize Options:

AMD Patch 1

Broadcom Airport driver (remove all other wireless drivers)

 

Does EFI and/or the Vanilla kernel work? N/A

 

Motherboard

Manufacturer:SIS

Motherboard Model:760GX

Chipset:N/A

BIOS Version: N/A

BIOS setup options: N/A

Audio: Doesn't work

LAN: Doesn't work

SATA & IDE: N/A

 

Processor

Processor Model:AMD Sempron 3000+

Speed:1.8Ghz

Recognized as what in System Profiler: 1.8Ghz Unknown

 

Video Card

What type of card (PCI Express/AGP/Integrated): Integrated

Model: M760G

Memory:N/A

Board Manufacturer:Sis

Patches used:None

QE/CI:N/A

All resolutions available: starts at 1024x768, was able to get up to 1200x768

Wireless/Wired Card

Interface: Integrated

Standard (Wireless only): 801b/g

Manufacturer: Broadcom

Model: N/A

Works? Yes with Broadcom Airport driver

Patches: N/A

 

Sound Card

Interface: On-board

Manufacturer:Realtek

Model:AC 97

Works? N

Patches: N/A

[acik84]

Current OS X Version: 10.5.6

 

Desktop/Laptop? Desktop

 

Prebuilt? (Y/N) No

 

Install Methods summary: IPC OSX86 10.5.6 Beta public(after mac installation say to restart, please use -f -v command after that restart.)

 

Motherboard

Manufacturer: Gigabyte

Motherboard Model: GA-MA78GM-S2H rev 1

Chipset: AMD 780G/AMD SB 700

BIOS Version: Revision: 1

BIOS setup options: AHCI enable n sata dvd drive

LAN: Works OOB

SATA : Works with AHCI enabled

USB: choose patch 2.0 full speed

Firewire: Works OOB

Sound: RTL889A - working by choosing the 889 driver(after install go to system preferences n choose "Internal speakers")

Memory: 4GB 800 mhz DDR2 no SMBIOS applied.

Product specific URL: search at google please

 

Processor

Processor Model: AMD Phenom X4 9850

Speed: 3 GHz overclocked

Recognized as what in System Profiler: In about this mac the computer recognizes four cores but states that it is a 3gz unknown processor 2MB L3 cache

 

 

Video Card

What type of card (PCI Express/AGP/Integrated): PCI EXPRESS

NVIDIA/ATI/Intel? NVidia

Model: 7300GT

Memory: 256MB

Board Manufacturer: Inno3D

Patches used: nvkush(or if u prefer on install don't choose any driver, instead use OSX86 tools to detect n install the right driver for you)

QE/CI: Yes

All resolutions available? Yes

 

Video Card

Disable the onboard card

What type of card (PCI Express/AGP/Integrated): Integrated

NVIDIA/ATI/Intel? ATI

Model: HD 3200

Memory: shared MB

Board Manufacturer: gigabyte

Patches used: none

QE/CI: no

All resolutions available? no, only 1027*768

[Dysphoria]

Install Methods summary: IATKOS 5i - OSX 10.5.5 - After update to 10.5.6 (having run the dtst patcher) stuff still works)

 

Does EFI and/or the Vanilla kernel work?

Partitioned as MBR/GUID the stock kernel works with PCEFI V9

 

Motherboard

Manufacturer: ABIT

Motherboard Model: IP35-E

Chipset: P35 Intel ICH9

BIOS Version: , Revision: 18 - latest from abit site

BIOS setup options: Disabled IDE controller

Audio: Only thing that needs patching (LINK) (Also see attatchment)

LAN: Works out of the box

SATA & IDE: SATA works, IDE Didn't work in previous versions but should work now, i havnt tested.

Booting the setup from a SATA dvd player works flawlessly.

Memory: 8GB DDR2 - 4x 2GB PC6400 (800MHz)

 

Processor

Processor Model: Intel Q9450

Speed: default: 2.66GHz - Running on 3.2GHz (400mhz * 8)

Recognized as what in System Profiler: UNKNOWN

 

Video Card

What type of card: NVIDIA PCI-Express

Model: GeForce 8800GTS

Memory: 512MB

Board Manufacturer:MSI

Patches used: During setup I selected the appropriate EFI string for my card

QE/CI: Fully working

All resolutions seem to be working

 

Other PCI/PCI-e Components (onboard NIC does work with OSX)

Interface: PCI

Manufacturer: Realtek

Model: RTL8139 Fast Ethernet

Works out of the box having selected the realtek drivers during setup

HDA_ICH9_ALC888.zip

[Dariosen]

Current OS X Version: Kalyway 10.5.2

 

Prebuilt? --No

 

Motherboard

 

Asus P5KPL-CM

• Install Method: Kalyway 10.5.2
  
• PS/2 - working perfectly
  
• SATA - working perfectly, 4 channels
  
• PATA - working perrfectly, both channels
  
• Audio - Stereo Out only with AppleAzalia
  
• LAN - not working
  
• GMA3100 Onboard Video: not tested
  
• System Profiler working perfectly - all values correct
  
• Sleep/Hibernate - never works - fan always on
  

CPU

Model Number: pentium D 950: 3,4 GHz

Recognised as: 3.4 GHZ

 

Memory/DDR: 2GB DDR2 (2x1GB Patriot)

 

Video

Manufacturer: Gigabyte

Model: nVidia GeForce 8400GS with 256MB GDDR2

Bus Type: PCI Express 16X

Memory size: 256MB GDDR2

Dual screen working? --haven't tried.

QE/CI working? --Yes Resolution changeable? -- Yes.

Required patches or bios flashing? -- NVinject256 -- no BIOS flashing needed.

 

SATA/IDE working: Both works.

 

Wifi & patches? -- No.

other peripherals/pci addon cards? No.

[nailz]

Current OS X Version: 10.5.2

 

Desktop

 

Prebuilt? (No)

 

Install Methods summary: (Kalyway on separate Drive)

 

Does EFI and/or the Vanilla kernel work? (partitioned as MBR, Dual Boot with XP through chain0, nforcekernel maxmem=3072)

 

Motherboard

Manufacturer:Asus

Motherboard Model:P5NE-SLI

Chipset:nforce4

BIOS Version: Ami , Revision:0301

BIOS setup options: Plug n Play Aware OS = yes, Powersaving = S1 & S3

Audio: Works out of the Box

LAN: Forcedeth Driver, expected some random System Lockups and removed the Driver for now

SATA & IDE: Works out of the Box

 

Processor

Processor Model: Intel E6600 CoreDuo

Speed:2,4Ghz

Recognized as what in System Profiler: Intel Core 2 Duo 1,6Ghz

 

Video Card

What type of card (PCI Express/AGP/Integrated): PCI-E 16x

NVIDIA/ATI/Intel? Nvidia

Model: 8800GT

Memory: 512 MB

Board Manufacturer: MSI

Patches used: nvinject 2.1

QE/CI:yes/yes

All resolutions available? yes, even with two Displays

 

Other Accessories (USB/FIREWIRE)

Type (Webcam, External Sound Card, USB bluetooth dongle, etc.):W-Lan, Printer HP Laserjet 1010

Name: DWL-G122

Manufacturer: D-Link

Works? Yes

Patches/Work out of the box? Ralink's plist needs to be edited with Vendor/Device ID

[ctn91]

It kinda works on my Sony Vaio.

 

Model: VGN-NS110E

Processor: shows up as a core 2 duo

Memory: also perfect

Hard drive: ditto to above

Optical drive: works perfectly

USB: perfect

Firewire: says it works but it actually doesn't. Haven't found drivers yet.

ExpressCard: Apple profiler did not list it so im taking that as a no.

web cam: works but only works when it wants to take your account picture, otherwise it says the video card is not supported

Video: stuck at 1024X768 Cannot find drivers yet.

Wireless: this is a no go as well.

VGA Out: didn't bother to test seeing as how it had no display drivers.

SD and Memory Stick Duo slots: no go.

[PixlNinja]

Current OS X Version: 10.5.2

 

Desktop/Laptop? Desktop

 

Prebuilt? : No

 

 

Install Methods summary:

Install OS X x86 by Kalyway on SATA HDD with AHCI enabled. and Kernel as kabylkernel.

IDE and SATA DVD drive by SONY working fine.

 

Dual booting with Windows Vista will not work if both the OSs are on same HDD, You Will not get an option to configur MBR. I got both OSs on separate SATA HDDs

 

Does EFI and/or the Vanilla kernel work? Vanilla Kernel won't boot the OS after successful Installation procedure, but kabylkernel is just fine.

 

 

Motherboard

 

Manufacturer: Intel

Motherboard Model: DG33FB

Chipset: Intel G33

BIOS Version: , Revision: DPP3510J.86A.0413

BIOS setup options: SATA should be set as"AHCI"; Processor - everything "disabled")

Audio: Works out of the box? Yes

LAN: Works out of the box? Yes. WLAN Works with Official NetGear WG111v3 USB adapter driver (because I use this)

SATA & IDE: SATA HDD is fine with both IDE DVD and SATA DVD made by Sony Corp.

 

 

Processor

 

Processor Model: Intel Core2 Quad Q6600

Speed:2.4GHz

Recognized as what in System Profiler: 2.4GHz Unknown

 

Video Card

 

What type of card : PCI Express

NVIDIA/ATI/Intel? NVIDIA

Model: GeForce 8500GT

Memory: 512 MB

Board Manufacturer: XFX

Patches used: NvInject 0.2.1 with 512MB patch

QE/CI: Both Works

All resolutions available? Yes

 

Integrated Gfx not working.

 

 

Audio

 

Type:Integrated

Patches/Work out of the box? : Works with ALC888 patch : Only Ports on Board works,

No Idea about Extended ports at front of Machine

 

 

Other Accessories

 

Type : Wireless USB WiFI Dongle

Name: NetGear WG111 v3

Manufacturer:NetGear

Works? Yes, With Official Driver for OS X : http://kb.netgear.com/app/answers/detail/a_id/2640

Patches/Work out of the box? Works Out of the box

[LucasIsEpic]

Current OS X Version: 10.5.2

 

Desktop

 

custom

 

tested with leo4allv4

 

EFI seems to work

 

Motherboard

Manufacturer: ASUS

Motherboard Model: M3N-HT deluxe

Chipset:

BIOS Version:0503 , Revision: R.1

BIOS setup options: default

Audio: not working

LAN: not working

SATA & IDE: IDE works but SATA doest get recognised

 

Processor

Processor Model: Athlon 64x2 6400

Speed:3.2

Recognized as what in System Profiler: unknown, 3.2 ghz but 1 core

 

Video Card

What type of card PCI-e

NVIDIA

Model:8800GT

Memory:512

Board Manufacturer: Official Nvidia board

Patches used:none

QE/CI:none

All resolutions available? only 1280x768

 

Video Card 2:

What type of card PCI-e

NVIDIA

Model:8800GT

Memory:512

Board Manufacturer: Evga

Patches used:none

QE/CI:none

All resolutions available? none

 

Other Accessories (USB/FIREWIRE)

Type: webcam

Name: quickcam 5000

Manufacturer:Logitech

Works? no

 

Other Accessories (USB/FIREWIRE)

Type: bluetooth

Name: BHG-

Manufacturer: Belkin

Works? yes, but doesnt accept incming connections- can send though

[joeyslaptop]

Current OS X Version: 10.5.2

 

Desktop

 

Prebuilt? (N)

 

Install Methods summary: (List all methods tested, check preferred method - the one you are writing about now)

 

Method 1: Kalyway 10.5.1 Install and Kalyway 10.5.2 updater (using instructions found on InsanelyMac). I didn't select any of the optional installs and instead loaded the installers and kexts manually afterwards (see method 2 for links to audio and video fixes).

 

Method 2 (preferred): Retail Install Mac OS X disc using "modified boot-132 (found here: http://www.mediafire.com/download.php?jzznndt2vki), instructions (found here: http://menoob.com/2008/09/04/hackintosh-in...l-dvd-on-a-pc/), Chameleon for Hard Disk (found here: http://tinyurl.com/6je4eh), fix for onboard graphics (found here: http://flibblesan.co.uk/files/mac/GMA900%20Pack%20r2.zip), and onboard audio fix (alc883 installer found on Kalyway 5.1 install disc).

 

Does EFI and/or the Vanilla kernel work? (example: partitioned as MBR, EFI v8 + Vanilla Kernel)

With Kalyway, I used both MBR and GUID partitions.

 

(in following sections, if you don't know or not sure, write "unknown")

Motherboard

Manufacturer: ASUS

Motherboard Model: P5GC-MX/1333

Chipset:

+Northbridge: Intel 945GC

+Southbridge: Intel IHC7

BIOS Version: , Revision: 0310

BIOS setup options: (example: SATA should be set as "native", "AHCI"; Processor - set EIST to "disabled")

Video: Works poorly (alternative patch with small glitch - found here: http://flibblesan.co.uk/files/mac/GMA900%20Pack%20r2.zip)

Audio: Works out of the box? No, needs alc883 patcher (found here: http://www.mediafire.com/?pgmzp9zcy4j)

LAN: Works out of the box? No, (no solution found other than to buy 3rd part LAN card)

SATA & IDE: Works out of the box? Yes

 

Processor

Processor Model: Intel Core 2 Duo CPU E4500

Speed: 2.20 GHz

Recognized as what in System Profiler: Recognized correctly

 

Video Card (if you have integrated and PCI/AGP, use this template twice)

What type of card (PCI Express/AGP/Integrated): Integrated

NVIDIA/ATI/Intel? Intel

Model: Integrated Intel Graphics Media Accelerator 950

Memory: 64MB

Board Manufacturer: ASUS

Patches used: only works in 1280x1024 stretched unless using a patch (found here: http://flibblesan.co.uk/files/mac/GMA900%20Pack%20r2.zip)

QE/CI:

All resolutions available? After patch (patch isn't perfect: to produce effect, rename a folder and look at your screen)

 

Video Card (if you have integrated and PCI/AGP, use this template twice)

What type of card (PCI Express/AGP/Integrated): PCI Express

NVIDIA/ATI/Intel? NVIDIA

Model: 8600 GT

Memory: 512MB

Board Manufacturer: PNY

Patches used: NVInstaller (found here: http://nvinstaller.com/)

QE/CI:

All resolutions available? After patch

[Bram1982]

Current OS X Version: 10.5.6 Ideneb 1.4

 

Desktop: Yes

 

Prebuilt: No

 

Install Methods summary: (List all methods tested, check preferred method - the one you are writing about now)

Ideneb 10.5.6 Install. Booted from Serial ATA DVD drive and install onto a single Serial ATA HDD

 

Does EFI and/or the Vanilla kernel work? (example: partitioned as MBR, EFI v8 + Vanilla Kernel)

Vanilla kernel works ( I selected no particular kernel, so it used the Vanilla kernel). Dunno really about EFI / MBR? Just used a blank HDD which I formatted with the OSX installer. So only one OSX partition

 

Computer parts and specifications

Motherboard manufacturer: ASUS

 

Motherboard Model: P5Q Pro

 

Chipset:

+Northbridge: unknown

+Southbridge: Intel ICH10

 

BIOS Version: Patched Bios 1613 - 1613_BIOS_Asus_P5Q_PRO_for_MAC_OS_X___all_OS__incl._by_Juzzi..ROM

BIOS setup options: Serial ATA set to AHCI

 

Video: Works fully. I selected HD3800 series in Ideneb 1.4 install setup. I have a Radeon 3870

 

Audio: Works. I selected ALC1200 audio codec in Ideneb 1.4 install setup. Be sure to check after install audio is not

set to headphones.

 

LAN: Didn't work out of the box and I didn't try to fix since I read nobody got it working yet. Instead I installed an old PCI Ethernet Card: 3com 3c905c - TXM. OSX 10.5.6 doesnt recognize this card by default, but DOES have the correct files in IONetWorkingFamily.kext Do the following: open IONetWorkingFamily.kext on windows (you'll see its just a folder with subfolders) goto Contents --> Plugins --> Apple3Com3C90x.kext --> Contents --> and open info.plist with wordpad. Scroll down about halfway till you see something like '<>key PCI 3C90X </key> (notice this is the Ethernet Card identifier) In this section look for <string> 0x900010b7 0x905010b7 etc. </string> Now you have to add the correct string for the 3Com 3c905 ethernet card. It's string is 0x920010b7 Just add this one and save the file. Copy IONetWorkingFamily.kext (not just the info.plist file!) back to your OSX install and use Kexthelper to install the kext again. You can also use OSX86 tools for this and also clear the kext cache (so OSX doesnt copy back the original file next boot) p.s Maybe other Ethernet Cards can get to work this way: check the folders in the .kext. Device ID's can be found with OSX86tools. It shows them a bit differen: For example: 10b7:9200 should be saved in the info.plist file as 0x920010b17 (notice the two groups of characters are switched!)

SATA & IDE: Works out of the box? Serial ATA works. IDE: Does NOT work out of the box and didn't try to get it working

 

Processor

Processor Model: Intel Core 2 Quad CPU Q9550

Speed: 2.8 GHz but overclocked to 3,4

Recognized as what in System Profiler: Recognized correctly, 4 cores used

 

Video Card (if you have integrated and PCI/AGP, use this template twice)

What type of card (PCI Express/AGP/Integrated): PCI express

NVIDIA/ATI/Intel? Ati

Model: Radeon HD3870

Memory: 512MB

Board Manufacturer: Sapphire

Patches used: No patches, just selected Radeon 3800 series at Ideneb 1.4 10.5.6 install procedure

All resolutions available? Yes, and dual screen works (test with 2x Dell 24 Inch at 1920x1200)

 

Other notes

All OS and program updates via Software Update (as of 16 feb. 2009) work OK. There's one wrong update: It shows a firmware update for a Radeon HD2600, but I didnt install that ofcourse. Furthermore the system wont completely shut down (and doesn't restart correctly) A bit inconvenient, but it appears to close OSX ok but just doesnt restart. So i press the reset / power button.

[nyquilu4ia]

Current OS X Version: Kalyway 10.5.2 intel/amd release

 

Desktop/Laptop? Desktop

 

Prebuilt? (Y/N) No

 

Install Methods summary: Kalyway 10.5.2 intel/amd release- patched with chameleon jmicron fix:

this allows the use of ide DVD.

Kernel: deselect 9.2 sleep, select 9.2 vanilla

Video: All nvidia, or just NVInject-

Audio: apply patch below

Net: marvel yukon- apply patch below for LAN 2

Lastnetkass- or applesmbios-800... running 4gb crucial ballistics 800's

 

 

 

Does EFI and/or the Vanilla kernel work? yes, both- prefer vanilla

 

 

Motherboard

Manufacturer: ASUS

Motherboard Model: P5B Deluxe wifi

Chipset: Intel 965 - socket 775

BIOS Version: , Revision: 1238

BIOS setup options: SATA set as AHCI- not IDE

Audio: no: need to patch using Azalia Audio pkg. found here:Azalia

LAN: LAN 1- LAN 2 needs patch. Found here: Mistico86 is the man / WOman

SATA & IDE: works with jmicron applied

 

Processor

Processor Model: Intel core 2 Duo E8400

Speed: 3.0 ghz

Recognized as what in System Profiler: with vanilla and lastnetkassmbios- 3.0ghz unknown- with applesmbios- 800, 4.3ghz, don't know why- system runs stable...

 

Video Card

What type of card (PCI Express/AGP/Integrated): PCIe

NVIDIA/ATI/Intel? NVidia

Model: GeForce 7600gt

Memory: 256mb

Board Manufacturer: BFG

Patches used: NVinject, and all nvidia selected / works fine..

QE/CI: both

All resolutions available? yes

 

Other PCI/PCI-e Components (USB are listed in Other Accessories below)

Wireless/Wired Card (for PCI/PCI-e cards only)

Interface: PCI/PCI-e?

Standard (Wireless only): (example: 801n)

Manufacturer:

Model:

Works? (Y/N, if "Y", list patches)

Patches:

 

Sound Card (this is for PCI/PCI-e cards only - integrated on motherboard is in motherboard section)

Interface: PCI/PCI-e?

Manufacturer:

Model:

Works? (Y/N, if "Y", list patches)

Patches:

 

Other Accessories (USB/FIREWIRE)

Type (Webcam, External Sound Card, USB bluetooth dongle, etc.):

Name: Seagate 1.5 Tb external

Manufacturer: Seagate

Works? (Y/N, if "Y", list patches, if needed) Yes

[shakster]

Current OS X Version: 10.5.2

 

Desktop

 

Prebuilt? (NO)

 

Install Methods summary: I only tried Kalyway so far

 

Does EFI and/or the Vanilla kernel work? EFI works Vanilla not supported

 

Motherboard

Manufacturer: ASUS

Motherboard Model: M2A-VM HDMI

Chipset: AMD690G SB: ATI600

BIOS setup options: Disable USB legacy Support IMPORTANT OR WILL NOT WORK!!

Audio: Works with ALC883 selected during install

LAN: Works out of the box

SATA & IDE: Very Slow SATA might not even be detected Use THIS: AppleATIATA.kext.zip

USB might not work, Use USB Fix 1.3

 

Processor

Processor Model: AMD Athelon X2 Dual Core 3600+

Speed: 1.9 GHz

Recognized as what in System Profiler: 1.9 GHz Unknown

 

Video Card

What type of card: Integrated

ATI

Model: X1250

Memory: SHARED

Board Manufacturer: ATI

Patches used: NONE AVALABLE

QE/CI: NO

All resolutions available? NO 1024x768 ONLY

 

Video Card

What type of card: PCIex

NVIDIA

Model: 8400GS

Memory: 256MB

Board Manufacturer: NVIDIA

Patches used: Nvject 256

QE/CI: Working

All resolutions available? Yes All

 

Onboard Firewire Doesn’t work (Firewire GUID 0x000000 IS INVALID!)

Used a PCI Firewire Card detected and fully working

[Anarchyw]

Current OS X Version: 10.5.6

 

 

Desktop/Laptop?

Desktop

Prebuilt? (N)

 

Install Methods summary: XxX 10.5.6 Finalv2, iPC Universal 10.5.6, iDeneb v1.4 10.5.6, iAtkos 5i

Prefer XxX 10.5.6 latest available

Boot commands: (F8) -v –f cpus=1 busratio=24 fsb=133 rd=disk0s2 AFTER boot DVD IDE Distro,

Does EFI and/or the Vanilla kernel work? Partitioned as GUID, EFI v9 + Vanilla Kernel (Updating to Chameleon boot loader) 1TB HDD Samsung (1TB HDD Storage + 250GB Vista Home Premium)

 

Motherboard

Manufacturer: ASUS

Motherboard Model: Rampage II Extreme

Chipset: X58/ICH10R

BIOS Version: 16 Mb Flash ROM

AMI BIOS, PnP, DMI2.0, WfM2.0, SM BIOS 2.4, ACPI2.0a Multi-Language BIOS Revision: 1204

BIOS setup options: AHCI

Audio: ADI® AD2000B Supreme FX X-Fi Audio Card (Not Working)

LAN: Dual Marvell Yukon 88E8056 Ethernet (Not Working)

SATA & IDE: SATA HDD & IDE DVD/BD (Only! – Please advise if you have another way)

Processor

Processor Model: Intel Core i7 965 Extreme Edition

Speed: 3.2 GHz

Recognized as what in System Profiler: (N/a Unable to use Internet, so I’m using Vista)

 

Ram

Brand: GEIL

Type: Triple 2GB DDR3 DRAMM

Video Card

What type of card (PCI Express/AGP/Integrated): PCIe

NVIDIA/ATI/Intel: NVIDIA

Model: GTX295

Memory: GDDR3 1792MB 896bit

Board Manufacturer: Zotac

Patches used: (N/a)

QE/CI: (N/a)

All resolutions available? Standard (Not Working)

 

Sound Card

Interface: PCIe

Manufacturer: Creative

Model: X-Fi Titanium “Fatali1ty” Pro Series (Not Working)

 

 

Other Accessories (USB/FIREWIRE)

Type: USB Wireless dongle

Name: DWA-110 (RT73)

Manufacturer: D-Link

Works: (Not Working)

Patches: Use latest Driver for Mac OS from Manufacturers website, Have not tried as of yet

Type: USB HDD

Name: Samsung 500GB

Manufacturer: Imation Apollo

[M@dMac]

so, if this thread is for 10.5.2..... where is the one for 10.5.6?

 

Please apologize me for my ignorance.

[enph]

Prebuilt? Yes

Manufacturer: Gateway

Model: ML6714

Install Methods summary: Wireless and graphics work on fresh install. For sound I used the AppleHDAPatcher v 1.20 with the Sigmatel9250 Linux codec. For battery meter I used the method described by user "SwampFoetus" at the bottom of the comments on: http://www.dailyblogged.com/125/upgrade-yo...-mac-os-x-1055/

Everything else works fine!