Hardware Compatibility List - Leopard 10.5.2

[anhloc]

Hardware Summary

Antec Sonata III Quiet Computing Case (chosen for form and function and lack of noise output)

Gigabyte EP35-DS3L Motherboard, BIOS F4 (updated to F5, Motherboard Revision 1.0 (chosen for compatibility))

Intel Core 2 E4600 2.4GHz 800MHz FSB Processor (decent processor for the price)

2GB Mushkin EM2-6400 DDR2 800MHz SDRAM (chosen for stock 1.8V voltage, yet having timings of 5-5-5-12 instead of 5-5-5-18, cheaper than Kingston ValueRAM)

500GB Seagate 7200.10 SATA Hard Drive (chosen for price and performance)

Pioneer DVR-215BK SATA DVD Optical Drive (chosen for price, performance, and OS compatibility, with older real Macintoshes, the Pioneers were the only way to go for a while)

Sapphire ATI Radeon 2600XT 256MB GDDR3 Video Card (chosen for price, performance and compatibility)

Startech 3 port Firewire 800 (2 800, 1 400) PCI Firewire Card (chosen for compatibility and speed and for use with older Firewire iSight)

Azio Micro Bluetooth 2.0+EDR USB Adapter (chosen for compatibility and size)

 

 

Install Methods summary: Kalyway 10.5.2 DVD -> Kalyway 10.5.3 Update -> Vanilla 10.5.4 Delta Update

Does EFI and/or the Vanilla kernel work? Vanilla works, using CHUD fix for shutdown and such

 

 

Motherboard

Gigabyte EP35-DS3L

Chipset: Intel P35 + Intel ICH9

BIOS: F4 (updated to F5)

Revision: 1.0

BIOS Setup Options: disable floppy, disable serial, disable parallel, disable overclocking, SATA in AHCI and native mode

Onboard Audio works out of the box? No, used ALC888 patch found on this site with AppleHDAPatcher, works great after, have only tried audio out, front panel headers work but somewhat scratchy noise, I don't really use it now

Onboard LAN works out of the box? Yes, after install, a full shutdown is required, then LAN works fine, LAN does not restore automatically after sleep, have to turn off DHCP then re-enable it for it to 'wake up'

SATA and IDE works out of the box? SATA - yes, in full AHCI SATA 2 3.0Gbps speed, did not test IDE

 

 

Processor

Intel Core 2 E4600 2.4GHz 800MHz FSB

Recognized as what in System Profiler: 2.4GHz Intel Core 2 Duo

 

 

Video Card

What type of card: PCI Express

NVIDIA/ATI/Intel? ATI

Model: Radeon 2600XT

Memory: 256MB GDDR3

Board Manufacturer: Radeon

Patches used: natit (during initial Kalyway 10.5.2 install,) don't know if 10.5.3 or 10.5.4 added native support for this card

QE/CI: Yes and Yes

All resolutions available? Yes, have not tried dual monitor support, DVI output is perfect

 

 

Addons

PCI card - Startech Firewire 800 3port PCI Card (for use with Firewire iSight, works out of box)

Bluetooth - Azio Micro USB Bluetooth Adapter (works out of box)

[sharkc]

|-

|Motherboard Model - ASUS P4S800D

|Chipset (Northbridge & Southbridge) - Northbridge: SiS 655FX - Southbridge: SiS 964

|

* Install Method: Kalyway 10.5.2 (Tried also iATKOS v4i - Not working, stalling after installation finished)

* BIOS Version: ; Revision:

* Audio: NOT TESTED

* LAN: SiS900, Installed with this drivers: http://forum.insanelymac.com/index.php?sho...0&hl=SiS900

* SATA & IDE: SATA - NOT TESTED but showing in System Profiler - High possibility it works - IDE - Working out of the box

* Optical Drive: DVD-RW [NEC ND-3520A] + DVD-Reader + CD-Writer [sAMSUNG SM-352N] - Working out of the box

* Do shutdown, reboot and sleep work? ALL work out of the box

|PC-EFI works BOOT.EFI.v80 + Sleep Kernel, Vanilla kernel not tested (I highly doubt it)

|USB not working without patching - needing the IOUSBFamily.kext from developer.apple.com + manual loading of IOUSBMassStorageClass.kext for mass storage devices. ETHERNET not working without drivers

|-

 

|-

|Intel Pentium 4 HT - 2.8ghz

|Fully Working (ie: two cores visible in Activity Monitor)

|Fully working with Sleep Kernel

|-

 

|-

|GeForce V9570 TD 256MB

|nVidia - ASUS

|No Patch Needed

|QE works - CI works

|I can change resolutions

|Fully Working without patches

|-

 

 

CONCLUSION:

I'm really impressed that it works on an 'old' configuration as mine, will be testing new features as they come along my daily usage - if news arise I'll update this post.

 

ciop ciop

[NFC Armageddon]

Current OS X Version: 10.5.2

 

Install method: Kalyway 10.5.2 EFI working PC_EFI_V8 working - Kernel Vanilla not working - used ModbinKernel

 

Prebuilt? --No

 

Motherboard

Manufacturer: ASROCK

Model: 775Xfire RAID

Version:

Bios Version: 1.40

Chipset: Northbridge: Intel® 925X

Audio: working natife but only 2-channel output, no line in, no mic in.

LAN: working natif

 

CPU

Model Number: Celeron D

Recognised as: 3,05 GHZ Core Solo

 

Memory/DDR: 3GB DDR2 (2x1GB 2x512mb)

 

Video

Manufacturer: ATI

Model: Radeon 2600 PRO with 256MB GDDR2

Bus Type: PCI Express 16X

Memory size: 256MB GDDR2

Dual screen working.

QE/CI working -- Resolution changeable.

Patch ATINject from DVD Kalyway

 

SATA/IDE: - working: Both works.

USB: - all working

PS2: - working

OTHER PCI: -- Yes

Skystar2: - not working -need patch

Canoupus DV-Storm2: - not working - need patch

ULI Sata-Ide: - not woking - need patch

 

SLEEP: not working

SUSPEND: - not working -blocking at resume

 

misc hardware: Keyboard Trust PS2 wired, TRUST 14914 USB laser mouse

 

by vaser

[Murdoc]

I should add that asus, and Foxconn build the pcs for apple, and the other thing that is differant is the bios. So mac minis are all intel 945 chipsets, other macs are P31 and up. The mac pros true chipset is a server chitset due to the dual processor boards. i hope this litte bit helps use find better boards that work.

 

Motherboard

Manufacturer:Supermicro

Motherboard Model:C2SBE

Chipset: P35

BIOS Version: , Revision: Newest bios are needed R1.1A 7-28-08

Audio: Works out of the box? No needs a patch

LAN: Yes it Works

SATA & IDE: Yes Works

 

Processor

Processor Model:Intel Celeron

Speed:1.60

Recognized as what in System Profiler: Intel Core solo

 

Video Card

What type of card (PCI Express/AGP/Integrated): Pci Express

NVIDIA/ATI/Intel? Nvidia

Model: 8400gs

Memory: 512mb

Board Manufacturer: Msi

Patches used: nvinject

QE/CI:yes both working

All resolutions available? 1024x768 do to the 15in'' im useing

[msl777]

Current OS X Version: Kalyway 10.5.2 with Chameleon bootloader (jmicron DVD patch)

 

Desktop

Prebuilt? N

Install Methods summary:

 

-BIOS settings = Changed RAID mode from IDE to AHCI. I used -v option during boot for installation.

-Installed WITHOUT nvidia, Audio, Wifi, mobo drivers. (only used language packs, default sleep kernel, patches, third apps, and JaS 10.4.8 ACPI/APIC drivers)

- I had to boot with one core (cpus=1) in order to boot into Leopard after installation.

- Installed nvidia driver from Nvidia Universal Installer (I selected "for 512MB.." in customize)

- Installed ALC888 driver (two kext files) from http://wiki.taruga.net/tiki-list_file_gall...php?galleryId=3 (file id=62) and HDAEnabler

 

Does EFI and/or the Vanilla kernel work? Used default Sleep Kernel from Kalyway DVD.

 

(in following sections, if you don't know or not sure, write "unknown")

Motherboard

Manufacturer: MSI P43 Neo3-F

Northbridge Chipset: P43

Southbridge Chipset: ICH10/ICH10R

BIOS Version: 1.3 (had to update BIOS so I could get the option to change RAID mode to AHCI)

BIOS setup options: SATA = AHCI. Power = S3. Everything else Disabled under "CPU Configuration".

Audio: ALC888 onboard audio works with patch (http://wiki.taruga.net/tiki-list_file_gall...php?galleryId=3 (file id=62)) and ALCInject

LAN: Ethernet works perfectly

SATA & IDE: Works (BIOS Settings: Changed RAID mode from IDE to AHCI.) Both my IDE/SATA DVD burners work great.

 

HDD

Western Digital Caviar SATA 500GB

 

Memory

OCZ Platinum DDR2 800Mhz 2GB RAM...Recognized as 2GB DDR2 667MHz

 

Processor

Processor Model: Intel Core 2 Duo E7200 Wolfdale 2.53GHz

Speed: Originally recognized as "2.53GHz unknown". Also keep in mind while using the JaS 10.4.8 ACPI/APIC drivers in the installation, I had to boot with one core (cpus=1) in order to boot into Leopard after installation.

 

Video Card

What type of card (PCI Express/AGP/Integrated): PCI-E (x16)

NVIDIA/ATI/Intel? Nvidia

Model: 8600GT

Memory: 512MB GDDR3

Board Manufacturer: EVGA

Patches used: Nvidia Universal Installer (I selected "for 512MB.." in customize)

QE/CI: Everything seems to looks beautiful at a great resolution for my 19" widescreen LCD. Quartz Extreme is supported and Core Image is Hardware Accelerated (if that's what those abbreviations mean).

 

USB

All works perfectly.

[tommw]

Current OS X Version: 10.5.2

 

Desktop

 

Prebuilt? (N)

 

Install Methods summary: Leo4Allv2

 

Does EFI and/or the Vanilla kernel work? Vanilla kernel doesn't work, EFI unknown

 

 

Motherboard

Manufacturer: Winfast/Foxconn

Motherboard Model: 6150 (from then on, unknown)

Chipset: nForce430

BIOS Version: Award Phoenix , Revision: 6.00

BIOS setup options: Set everything to default, then set first boot device to your CD-ROM drive.

Audio: Realtek AC97, works out of the box.

LAN: Works out of the box.

SATA & IDE: IDE works out of the box, SATA unknown.

 

Processor

Processor Model: AMD Athlon 64 x2 3600+ Codename "Windsor"

Speed: 2.01GHz

Recognized as what in System Profiler: 2.01GHz Unknown

 

Video Card

What type of card (PCI Express/AGP/Integrated): Integrated

NVIDIA/ATI/Intel?: NVIDIA

Model: 6150

Memory: 256MB

Board Manufacturer: Unknown

Patches used: NVInject-256

QE/CI: Unknown

All resolutions available?: 1024x768 only, fixable by pressing F8 at Darwin prompt and typing "Graphics Mode"="screen.resolution.here" or adding the Graphics Mode <key> to apple.com.Boot.plist.

 

Other PCI/PCI-e Components (USB are listed in Other Accessories below)

Wireless/Wired Card (for PCI/PCI-e cards only)

Interface: PCI

Standard (Wireless only): 801.11g

Manufacturer: Belkin

Model: F5D7000

Works?: Yep!

Patches: None!

 

Other Accessories (USB/FIREWIRE)

Type: PS/2 Wireless Keyboard & Mouse

Name: Logitech Rechargeable Desktop Y-RK49

Manufacturer: Logitech

Works?: Y

Patches/Work out of the box?: Works out of the box.

[D8300]

Install Method Iatkos2.0

No patches worked perfect - Runs slow

 

 

Motherboard:Dell

Manufacturer:Dell

Model: Dimension 8300

P4 3.0 Ghz

 

Audio:On board - Recongized and functional on install

 

 

Processor:

Manufacturer: Intel

Model: pentium 4

 

Ram:

1760 DDR1

Dual Channel: Enabled

 

Video Card: Recognized and functional on Install

Manufacturer: ATI

Model: X1300

Vram: 512Mb

QE: Supported.

Rotation: Supported.

 

Networking: Recognized and ran on install

Onboard dell, whatever it is.

 

Hard Drives:

60Gb Seagate Barracuda 7200RPM ATA

80Gb Western Digital 7200RPM ATA*

 

 

Monitor:

Manufacturer: Toshiba LCD

Model: 26" Wide Format

Resolution: 1680x1050

Input Used: DVI

[runorion]

Current OS X Version: 10.5.2

 

Desktop

Prebuilt? N

 

I used an old sony vaio pcv c11m pc

 

(If prebuilt then add following information, otherwise fill the Motherboard:)

Manufacturer: (example Dell?)

Model: (example Inspiron xxx?)

 

Install Methods summary:

Kalyway 10.5.2

leo4all v2

 

i am using kalyway, it was easier to set the sound

 

Does EFI and/or the Vanilla kernel work? (example: partitioned as MBR, EFI v8 + Vanilla Kernel)

 

Using Mbr

 

Motherboard

Manufacturer: Asus

Motherboard Model: p5k vm

Chipset: last bios Chine

BIOS Version: , Revision: 9.0.2

BIOS setup options: to install, first i had to set sata to compatible, and then to ahci

Audio: yes, i chose in kalyway the alc883 driver, and i had to look for it from azalia

LAN: first i disabled it, then abled it once os was installed, and ity works

SATA & IDE: i chose jmicron sata drivers for both

 

Processor

Processor Model: q9300

Speed: 2500

Recognized as what in System Profiler: system profiler is at the end

 

Video Card

Integrated works fine

 

 

Video Card

What type of card (PCI Express/AGP/Integrated): leadtek px7800gtx

NVIDIA/ATI/Intel? nvidia

Model: px7800gtx

Memory: 256 ddr3

Board Manufacturer: leadtek

Patches used: nforce 256

QE/CI:

All resolutions available? my screen is a daewoo 17"... 1280*1024

 

Other PCI/PCI-e Components (USB are listed in Other Accessories below)

Wireless/Wired Card not yet

 

 

Other Accessories

firebox works ootb

but somtimes hangs ... maybe a lack of power , I have a 300 w power supply

 

 

 

---------

 

 

11/08/08 14:28

 

 

Logiciel :

 

Vue d’ensemble du logiciel système :

 

Version du système : Mac OS X 10.5.2 (9C7010)

Version du noyau : Darwin 9.2.2

Temps depuis le démarrage : 7:16

 

Matériel :

 

Informations matériel :

 

Nom du modèle : Mac

Identifiant du modèle : P5K-VM

Vitesse du processeur : 2.5 GHz

Nombre de processeurs : 1

Nombre total de cœurs : 4

Cache de niveau 2 : 6 Mo

Mémoire : 4 Go

Vitesse du bus : 1.33 GHz

Version de la ROM de démarrage : BOOT.EFI.V80

 

Réseau :

 

Built-in Serial Port (1) :

 

Type : PPP (PPPSerial)

Matériel : Modem

Nom de périphérique BSD : serial1

Adresse IP attribuée : Non

 

Ethernet Adaptor (en0) :

 

Type : Ethernet

Matériel : Ethernet

Nom de périphérique BSD : en0

Adresse IP attribuée : Oui

 

FireWire :

 

Type : FireWire

Matériel : FireWire

Nom de périphérique BSD : fw0

Adresse IP attribuée : Non

 

ATA :

 

Bus ATA :

 

HL-DT-STDVDRRW GSA-4164B :

 

Capacité : 607,6 Mo

Modèle : HL-DT-STDVDRRW GSA-4164B

Révision : 1.00

Numéro de série :

Support amovible : Oui

Disque amovible : Non

Nom BSD : disk1

Protocole : ATAPI

Numéro de l’unité : 0

Type de socket : Interne

Scrutation de faible puissance : Non

Gestionnaires Mac OS 9 : Non

Type de carte de partition : Inconnu

État S.M.A.R.T. : Non géré

Volumes :

disk1s0 :

Capacité : 529,1 Mo

Type de support : CD-R

Inscriptible : Non

Système de fichiers : ISO Rockridge

 

Bus ATA :

 

ATA série :

 

Bus ATA série :

 

WDC WD10EACS-00ZJB0 :

 

Capacité : 931,51 Go

Modèle : WDC WD10EACS-00ZJB0

Révision : 01.01B01

Numéro de série : WD-WCASJ0335444

Support amovible : Non

Disque amovible : Non

Nom BSD : disk0

Protocole : ata

Numéro de l’unité : 0

Type de socket : ATA série

Gestionnaires Mac OS 9 : Non

Type de carte de partition : MBR (partition Master Boot Record)

État S.M.A.R.T. : Vérifié

Volumes :

disk0s1 : Windows xp pro sp2

Capacité : 204,39 Go

Disponible : 198,95 Go

Inscriptible : Non

Système de fichiers : NTFS

disk0s2 : Windows vista 64 pro sp2

Capacité : 50 Go

Disponible : 34,07 Go

Inscriptible : Non

Système de fichiers : NTFS

disk0s3 : Mac os x

Capacité : 211,48 Go

Disponible : 203,88 Go

Inscriptible : Oui

Système de fichiers : Journaled HFS+

disk0s5 : Ubuntu ( to come, once i figure out how to install multiboot, since i installed mac os x , i can't start under windows)

Capacité : 55,25 Go

Disponible : 55,23 Go

Inscriptible : Oui

Système de fichiers : MS-DOS FAT32

disk0s6 : Swap for ubuntu

Capacité : 20 Go

Disponible : 19,99 Go

Inscriptible : Oui

Système de fichiers : MS-DOS FAT32

disk0s7 : free, for tests

Capacité : 390,38 Go

Disponible : 390,18 Go

Inscriptible : Oui

Système de fichiers : MS-DOS FAT32

 

Cartes vidéo / moniteurs :

 

Graphics by NVIDIA :

 

Jeu de composants : Graphics by NVIDIA

Type : Moniteur

Bus : PCIe

Longueur de la voie PCIe : x16

VRAM (totale) : 256 Mo

Fournisseur : NVIDIA (0x10de)

Identifiant du périphérique : 0x0091

Identifiant de révision : 0x00a1

Révision de la ROM : NVinject 0.2.0

Moniteurs :

SDM-1701DS :

Résolution : 1280 x 1024 @ 60 Hz

Profondeur : Couleurs 32 bits

Core Image : Avec accélération matérielle

Moniteur principal : Oui

Miroir : Désactivé

Connecté : Oui

Quartz Extreme : Géré

Rotation : Géré

Connecteur pour le moniteur :

État : Aucun moniteur connecté

 

Diagnostics :

 

Test automatique d’allumage :

 

Dernière exécution : 11/08/08 07:12

Résultat : Réussi

 

FireWire :

 

Bus FireWire :

 

Vitesse maximum : Jusqu’à 400 Mb/s

 

Gravure de disque :

 

HL-DT-ST DVDRRW GSA-4164B :

 

Révision du programme interne : 1.00

Interconnexion : ATAPI

Gestion de la gravure : Oui (prise en charge de lecteur générique)

Chemin du profil : Aucun

Cache : 2048 Ko

Lecture de DVD : Oui

CD gravables : -R, -RW

DVD gravables : -R, -R DL, -RAM, -RW, +R, +R DL, +RW

Stratégies d’écriture : CD-TAO, CD-SAO, CD-Raw, DVD-DAO

Données :

Type : CD-R

Vierge : Non

Effaçable : Non

Réinscriptible : Non

Autres gravures : Non

 

Mémoire :

 

BANK0/DIMM0 :

 

Taille : 2 Go

Type : DDR2 SDRAM

Vitesse : 800 MHz

État : OK

Fabricant : Manufacturer0

Numéro de pièce : PartNum0

Numéro de série : SerNum0

 

BANK1/DIMM1 :

 

Taille : Vide

Type : Vide

Vitesse : Vide

État : Vide

Fabricant : Vide

Numéro de pièce : Vide

Numéro de série : Vide

 

BANK2/DIMM2 :

 

Taille : 2 Go

Type : DDR2 SDRAM

Vitesse : 800 MHz

État : OK

Fabricant : Manufacturer2

Numéro de pièce : PartNum2

Numéro de série : SerNum2

 

BANK3/DIMM3 :

 

Taille : Vide

Type : Vide

Vitesse : Vide

État : Vide

Fabricant : Vide

Numéro de pièce : Vide

Numéro de série : Vide

 

USB :

 

Bus USB à grande vitesse :

 

Emplacement du contrôleur de l’hôte : Emplacement d’extension

Gestionnaire du contrôleur de l’hôte : AppleUSBEHCI

Identifiant du périphérique PCI : 0x293c

Identifiant de révision du PCI : 0x0002

Identifiant du fournisseur du PCI : 0x8086

Numéro de bus : 0xfa

 

Bus USB à grande vitesse :

 

Emplacement du contrôleur de l’hôte : Emplacement d’extension

Gestionnaire du contrôleur de l’hôte : AppleUSBEHCI

Identifiant du périphérique PCI : 0x293a

Identifiant de révision du PCI : 0x0002

Identifiant du fournisseur du PCI : 0x8086

Numéro de bus : 0xfd

 

Bus USB :

 

Emplacement du contrôleur de l’hôte : Emplacement d’extension

Gestionnaire du contrôleur de l’hôte : AppleUSBUHCI

Identifiant du périphérique PCI : 0x2934

Identifiant de révision du PCI : 0x0002

Identifiant du fournisseur du PCI : 0x8086

Numéro de bus : 0x1d

 

Bus USB :

 

Emplacement du contrôleur de l’hôte : Emplacement d’extension

Gestionnaire du contrôleur de l’hôte : AppleUSBUHCI

Identifiant du périphérique PCI : 0x2938

Identifiant de révision du PCI : 0x0002

Identifiant du fournisseur du PCI : 0x8086

Numéro de bus : 0x3a

 

USB Mouse :

 

Version : 1.00

Alimentation du BUS (mA) : 500

Vitesse : Jusqu’à 1,5 Mb/s

Fabricant :

Identifiant du produit : 0x0001

Identifiant du fournisseur : 0x06a2

 

Bus USB :

 

Emplacement du contrôleur de l’hôte : Emplacement d’extension

Gestionnaire du contrôleur de l’hôte : AppleUSBUHCI

Identifiant du périphérique PCI : 0x2935

Identifiant de révision du PCI : 0x0002

Identifiant du fournisseur du PCI : 0x8086

Numéro de bus : 0x3d

 

Bus USB :

 

Emplacement du contrôleur de l’hôte : Emplacement d’extension

Gestionnaire du contrôleur de l’hôte : AppleUSBUHCI

Identifiant du périphérique PCI : 0x2936

Identifiant de révision du PCI : 0x0002

Identifiant du fournisseur du PCI : 0x8086

Numéro de bus : 0x5d

 

Bus USB :

 

Emplacement du contrôleur de l’hôte : Emplacement d’extension

Gestionnaire du contrôleur de l’hôte : AppleUSBUHCI

Identifiant du périphérique PCI : 0x2939

Identifiant de révision du PCI : 0x0002

Identifiant du fournisseur du PCI : 0x8086

Numéro de bus : 0x5a

 

Bus USB :

 

Emplacement du contrôleur de l’hôte : Emplacement d’extension

Gestionnaire du contrôleur de l’hôte : AppleUSBUHCI

Identifiant du périphérique PCI : 0x2937

Identifiant de révision du PCI : 0x0002

Identifiant du fournisseur du PCI : 0x8086

Numéro de bus : 0x1a

 

 

 

 

thanks

[hey81]

Current OS X Version: 10.5.2

 

Desktop/Laptop Acer Aspier 7720G

 

Prebuilt? N

 

Manufacturer: ACER

Model: ASPIER 7720G

 

Install Methods summary: KALWAY OS X 10.5.2 INTEL/AMD

 

 

Motherboard

Manufacturer: INTEL

Motherboard Model: Acer Aspire 7720

Chipset: Intel Crestline-PM PM965

BIOS Version:V1.34 , Revision:

BIOS setup options: NO CHANGED

Audio: WORKING WITH HDA KEX

LAN: WORKING WITH BMC57XX PATCH

SATA & IDE: OK

 

Processor

Processor Model: Mobile DualCore Intel Core 2 Duo T7300, 1982 MHz (10 x 198)

Speed:

Recognized as what in System Profiler: INTEL CORE 2 DUO

 

Video Card: GFORCE 8400GS

What type of card : Integrated (NVIDIA)

Model: 8400M GS

Memory:256 MVIDIA

Patches used: NON

All resolutions available ALL WORKING

 

Other PCI/PCI-e Components (USB are listed in Other Accessories below)

Wireless/Wired Card (for PCI/PCI-e cards only) : INTEN 3945ABG- not working, swap with broadcom 4312 afert patch was ok

Interface: PCI/PCI-e

Standard (Wireless only): Intel 3945abg - not working, swap with BMC4312

Manufacturer: Broadcom

Model:BMC4312

Works OK

Patches: broacom 43xx patch

 

Sound Card realtek ALC286 HD

Interface: PCI/PCI-e?

Manufacturer: REALTEK

Model: ALC286 HD

Works Y -with ALC286 patch

Patches:

 

Other Accessories (USB/FIREWIRE)

Webcam : ACER WEBCAM (SUYIN) - NOT WORKING

USB bluetooth dongle TRUST - WORKS OK WITHOUT PATCH

USB WIRELESS DONGLE : NETGEAR WG111 V2 WORKING OK WITH REALTEK PATCH

BLUETOOTH MOUSE: ASUS BLUETHOOT WIRELESS MOUSE - WORKS OK

CARD READER - NOT WORKING

 

THANKS EVERY THINK I WAS ABLE TO FIND ON THIS FORUM MANY THANKS FOR THAT !!!!!!!!

 

Computer:

Computer Type ACPI x86-based PC (Mobile)

 

 

Motherboard:

CPU Type Mobile DualCore Intel Core 2 Duo T7300, 1982 MHz (10 x 198)

Motherboard Name Acer Aspire 7720

Motherboard Chipset Intel Crestline-PM PM965

System Memory 3072 MB (DDR2-667 DDR2 SDRAM)

DIMM1: Kingston 9905295-055.A00LF 2 GB DDR2-667 DDR2 SDRAM (5-5-5-15 @ 333 MHz) (4-4-4-12 @ 266 MHz) (3-3-3-9 @ 200 MHz)

DIMM3: Kingston 9905295-055.A00LF 2 GB DDR2-667 DDR2 SDRAM (5-5-5-15 @ 333 MHz) (4-4-4-12 @ 266 MHz) (3-3-3-9 @ 200 MHz)

BIOS Type Insyde (03/26/08)

 

Display:

Video Adapter NVIDIA GeForce 8400M GS (256 MB)

Video Adapter NVIDIA GeForce 8400M GS (256 MB)

3D Accelerator nVIDIA GeForce 8400M GS

Monitor LG Philips LP171WP4-TLB1 [17.1" LCD]

 

Multimedia:

Audio Adapter Realtek ALC268 @ Intel 82801HBM ICH8M - High Definition Audio Controller

 

Storage:

IDE Controller Intel® ICH8M SATA AHCI Controller - 2829

IDE Controller Intel® ICH8M Ultra ATA Storage Controllers - 2850

IDE Controller Ricoh Memory Stick Controller

IDE Controller Ricoh SD/MMC Host Controller

IDE Controller Ricoh xD-Picture Card Controller

Storage Controller Microsoft iSCSI Initiator

Disk Drive Easy Disk USB Device (1929 MB, USB)

Disk Drive Hitachi HTS542516K9SA00 ATA Device (160 GB, 5400 RPM, SATA)

Disk Drive Hitachi HTS542516K9SA00 ATA Device (160 GB, 5400 RPM, SATA)

Optical Drive TOSHIBA DVDW/HD TS-L802A ATA Device (DVD+R9:2.4x, DVD-R9:2.4x, DVD+RW:4x/4x, DVD-RW:4x/4x, HD DVD-ROM:1x, DVD-ROM:8x, CD:16x/10x/24x HD DVD-ROM/DVDRW)

SMART Hard Disks Status OK

 

Partitions:

C: (NTFS) 102624 MB (78170 MB free)

D: (NTFS) 152624 MB (147319 MB free)

 

Total Size 249.3 GB (220.2 GB free)

 

Input:

Keyboard Launch Manager

Keyboard Microsoft eHome MCIR 109 Keyboard

Keyboard Microsoft eHome MCIR Keyboard

Keyboard Microsoft eHome Remote Control Keyboard keys

Mouse HID-compliant mouse

Mouse HID-compliant mouse

Mouse PS/2 Compatible Mouse

 

Network:

Primary IP Address 192.168.0.4

Primary MAC Address 00-1E-2A-16-3A-88

Network Adapter Bluetooth Device (Personal Area Network) #2

Network Adapter Broadcom 802.11 Multiband Network Adapter - WAS INTEL 3945ABG

Network Adapter Broadcom NetLink Gigabit Ethernet WORKING WITH PATCH

Network Adapter NETGEAR WG111v2 54Mbps Wireless USB 2.0 Adapter WORKING WITH PATCH

Modem HDAUDIO Soft Data Fax Modem with SmartCP

 

Peripherals:

Printer Microsoft Office Document Image Writer

Printer Microsoft XPS Document Writer

FireWire Controller Ricoh RL5C832 IEEE1394 Controller (PHY: Ricoh RL5C832) - NOT WORKING

Infrared Controller Microsoft eHome Infrared Transceiver DONT KNOW

USB1 Controller Intel 82801HBM ICH8M - USB Universal Host Controller

USB1 Controller Intel 82801HBM ICH8M - USB Universal Host Controller

USB1 Controller Intel 82801HBM ICH8M - USB Universal Host Controller

USB1 Controller Intel 82801HBM ICH8M - USB Universal Host Controller

USB1 Controller Intel 82801HBM ICH8M - USB Universal Host Controller

USB2 Controller Intel 82801HBM ICH8M - USB2 Enhanced Host Controller

USB2 Controller Intel 82801HBM ICH8M - USB2 Enhanced Host Controller

USB Device Acer CrystalEye webcam NOT WORKING

USB Device Broadcom Bluetooth 2.0 EDR USB Dongle WORKS OK

USB Device NETGEAR WG111v2 54Mbps Wireless USB 2.0 Adapter WORKS WITH REALTEK PATCH

USB Device USB Composite Device

USB Device USB Mass Storage Device

Battery Microsoft AC Adapter

Battery Microsoft ACPI-Compliant Control Method Battery

 

DMI:

DMI BIOS Vendor Acer

DMI BIOS Version V1.34

DMI System Manufacturer Acer

DMI System Product Aspire 7720

DMI System Version V1.34

[dragon4chen]

Current OS X Version: 10.5.2

 

Desktop/Laptop? Desktop

 

Prebuilt? N

 

Install Methods summary: Kalyway 10.5.2 with jMicron patch. Dual boot.

 

Does EFI and/or the Vanilla kernel work? not sure what this means but regular "-v" works.

 

Motherboard

Manufacturer: Asus

Motherboard Model: P5B-Plus

Chipset: Intel

BIOS Version: 1008, Revision: 1103

BIOS setup options: Everything was set to default setting but Sata was set to AHCI

Audio: Works out of the box? Yes

LAN: Works out of the box? No, had to search around for Attansic Lan patch. It's in this forum. Search google for "Attansic project" and it'll come up.

SATA & IDE: Works out of the box? Yes

 

Processor

Processor Model: Intel E6420

Speed: 2.13 GHz

Recognized as what in System Profiler: Intel Core 2 Duo 2.13 GHz (recognize the overclocked speed as well)

 

Video Card

What type of card (PCI Express/AGP/Integrated): PCI Express

NVIDIA/ATI/Intel? nVidia

Model: 8800GTS

Memory:640MB

Board Manufacturer: EVGA

Patches used: None. Driver was included in Kalyway 10.5.2 DVD

QE/CI: Unknown

All resolutions available? Yes

 

Other Accessories (USB/FIREWIRE)

Type (Webcam, External Sound Card, USB bluetooth dongle, etc.): USB works

Name: on board

Manufacturer: on board

Works? (Y/N, if "Y", list patches, if needed) Y

Patches/Work out of the box? Patches needed for it to work properly.

USB mount fix

[SWELycaon]

Current OS X Version: 10.5.2

 

Desktop/Laptop? Desktop

 

Prebuilt? No

 

Install Methods summary: Zephyroth 10.5.2 Rev 2. (Rev 1 & LawlessPPC Chameleon won't work).

Installed with the following options: ToH 9.2, AC97 Audio, NForce chipset driver, Silicon Image 3132, Nvidia 10.5.2 KEXTS, NVInject 256MB, LAN Forcedeth, Filesystem support NTFS, Singleboot Darwin MBR.

 

Does EFI and/or the Vanilla kernel work? Must be MBR, EFI v8

 

(in following sections, if you don't know or not sure, write "unknown")

Motherboard

Manufacturer: Asus

Motherboard Model: A8N SLI Deluxe

Chipset: Nforce 4

BIOS Version: , Unknown

BIOS setup options: I always have Firewire, Floppy, Com and Paralell ports disabled.

Audio: Works out of the box? Yes, with AC97 option checked

LAN: Works out of the box? Yes, with Forcedeth option checked

SATA & IDE: Works out of the box? Yes, with Nforce chipset option checked.

 

Processor

Processor Model: AMD XP

Speed: 3500+

Recognized as what in System Profiler: Unknown

 

Video Card (if you have integrated and PCI/AGP, use this template twice)

What type of card (PCI Express/AGP/Integrated): PCIExpress

NVIDIA/ATI/Intel? Nvidia

Model: 6800GT

Memory: 256MB

Board Manufacturer: XFX

Patches used: Nvidia 10.5.2 KEXTS and NVInject 256MB options checked

QE/CI: Unknown

All resolutions available? Yes

 

SATA1: WD Raptor 74GB (with Vista)

SATA2: WD 200GB (for Leopard, named Leopard, using MBR and journaled file system)

IDE Master: NEC DVD R/W (fully working in Leopard)

 

NOTE: For install to work, the WD Raptor disk had to be completely disabled in BIOS and the WD200 had to be set as the boot-disk after the DVD in order = Only one SATA disk could be active. With this the install goes just fine.

If both SATA-disks are active the Zephyroth 10.5.2 REV2 will give a Installed Failed message and the disk will inly boot if the Zephyroth DVD are in the DVD.

If both SATA-disks are active the Zephyroth 10.5.2 REV1 will install fine, but the OSX boot will stop with a "Syncing disks. Killing all processes" message.

 

Best regards, Lycaon

[loserpro2]

Current OS X Version: 10.5.2 (kalyway ver.)

 

Desktop/Laptop? Desktop

 

Prebuilt? (Y/N) Nope.

 

Install Methods summary: (List all methods tested, check preferred method - the one you are writing about now)

Kalyway 10.5.2 intel amd dvd, Gparted Live 0.3.7-7, Hiren's Boot CD 9.5, Dual boot - chain0 system.

guides used from OSx86 Wiki, as well as the kalyway dvd discription thingy. i also forgot to install some drivers and also did not install correct drivers at one point. honestly, i am a noob at this, and took me about 5 times to install it correctly. i shall be writing up a short manual or so as support for people with hardware similar to mine.

 

Does EFI and/or the Vanilla kernel work? (example: partitioned as MBR, EFI v8 + Vanilla Kernel)

i can't remeber what EFI means at the moment so please excuse me, but yes, Vanilla Kernal works. i will check up what EFI is and report back asap.

 

(in following sections, if you don't know or not sure, write "unknown")

Motherboard

Manufacturer: Asus

Motherboard Model: P5LD2-SE (NOTE: NOT P5LD2-VM-SE)

Chipset: Intel 945G

BIOS Version: A_M_I_ - 1000723 if that helps, Revision: not sure, sorry.

BIOS setup options: (example: SATA should be set as "native", "AHCI"; Processor - set EIST to "disabled")

i think AHCI and Processor tweaks was done, and that was done when selecting which patches on the kalyway install disk.

Audio: Works out of the box? If not, list patches.

Yes, works out of the box. but i think it really really loud. used default audio drivers selected on DVD.

LAN: Works out of the box? If not, list patches.

yes, works out of the box.

SATA & IDE: Works out of the box? If not, list patches.

yes, works out of the box. however, need to try again with the one installed on my pc cause i'm borrowing another computers CD/DVD-RW.

Processor

Processor Model: Intel Core 2 Duo 4300 - i think E4300

Speed: 1.8Ghz

Recognized as what in System Profiler: 1.8Ghz Intel Core 2 Duo. i will double check.

 

Video Card (if you have integrated and PCI/AGP, use this template twice)

What type of card (PCI Express/AGP/Integrated): PCI-E

NVIDIA/ATI/Intel? Nvidia

Model: 8500GT

Memory: 256MB

Board Manufacturer: Eagle

Patches used: none.

QE/CI: need to check what that means sorry, but i think it works.

All resolutions available? yes - at the moment using other comp's 17" monitor. will check on my own 15"

 

Other PCI/PCI-e Components (USB are listed in Other Accessories below)

Wireless/Wired Card (for PCI/PCI-e cards only)

Interface: PCI/PCI-e? n/a

Standard (Wireless only): (example: 801n) nope.

Manufacturer: n/a

Model: n/a

Works? (Y/N, if "Y", list patches) n/a

Patches: n/a

 

Sound Card (this is for PCI/PCI-e cards only - integrated on motherboard is in motherboard section)

Interface: PCI/PCI-e?

Manufacturer:

Model:

Works? (Y/N, if "Y", list patches)

Patches:

 

Other Accessories (USB/FIREWIRE)

Type (Webcam, External Sound Card, USB bluetooth dongle, etc.): usb definately working. webcam and bluetooth might test later, due to not using these components a lot.

Name: n/a at the moment

Manufacturer: n/a at the moment

Works? (Y/N, if "Y", list patches, if needed) n/a at the moment

Patches/Work out of the box? n/a at the moment

 

other possible relavant information:

2GB kingston Ram, 2 SATA harddisks on pc - one 300gb maxtor, another 500gb WD for data. Dual Boot with Windows XP SP2

[Manuel Serol]

Hi people

 

I've an HP Pavillion ZD8256ea with Leopard

 

Hardware:

 

Pentium 4 3,2Ghz

2GB RAM

ATI X600 256MB

DVD-RW DL

Infrared Command

Card Reader

AC97 AudioCard

 

Software:

 

Leo4All V2

Callisto ATIX600 Ktexts for ZD8000 series

AppleAC97audio.ktext

 

I'm very happy with this installation, my infrared command function good, audio too and I can use my 17TFT with 1440*900 resolution, but my cardreader doesn't func and I can't use QI/CE with my ATI X600

 

If anyone Knows how I can configure my graphicard to use QI/CE I appreciatte very much your help, because this is my only bad experience with Leopard at the moment.

 

Thanks and Regards.

[Dave Z]

Well, it took several trial installs but now I have a fully functional and stable Leopard box!

 

Current OS X Version: 10.5.4 (iAtkos v4i)

 

Desktop/Laptop? Desktop

Prebuilt? (Y/N) N

(If prebuilt then add following information, otherwise fill the Motherboard:)

Manufacturer: (example Dell?) N/A

Model: (example Inspiron xxx?) N/A

 

Install Methods summary: (List all methods tested, check preferred method - the one you are writing about now)

Here's what I did, step by step:

 

1) Reset BIOS to Optimal Defaults and configured to boot from DVD

2) Started with iAktos v4i DVD (no special options at boot)

3) Partitioned hard drives: Single partition each, MBR, Mac OS Extended (Journaled) filesystem

4) Chose Custom install options:

4a) Deselected Darwin Bootloader

4b) Additional Patches, chose Darwin X86 for MBR, Kernel 9.2.0 ToH options, and SMBIOS->AppleSMBIOS netkas

4c) Chose Remove Thermal kexts

4d) In Drivers, chose VGA->nVidia->NVinject->512MB, System->SATA, and Network->Intel Pro/100 VE

5) Booted into O/S with fully-functional LAN and audio, limited vidio (no QE/CI)

6) After install, ran NVinstaller v5.2 for QE/CI support

7) Installed Apple updates successfully with no adverse effects

8) Optional: Configured VNC screen sharing, disabled sleep mode, and enabled SMB file sharing successfully

9) Optional: Updated kernel to ToH/StageXNU 9.4.0 (used OSx86 Tools 1.0.149)

 

Tested with:

 

iWork '08, Aperture 2.1, Adobe Photoshop CS3, OpenOffice.org 2.4, AOL for Mac OS X, eclipse, GIMP, and more -- no glitches

 

System has been rock solid, stable, and an incredible performer. 99% perfect. Disabled sleep mode in power settings (does not resume properly). This is no issue for me as I need sleep disabled to keep VNC service accessible.

 

Does EFI and/or the Vanilla kernel work? (example: partitioned as MBR, EFI v8 + Vanilla Kernel)

 

No (not a Core 2 processor)

(in following sections, if you don't know or not sure, write "unknown")

Motherboard

Manufacturer: Intel

Motherboard Model: D915PCYL (no built-in FireWire)

Chipset: Intel 915P

BIOS Version: , Revision: 0040

BIOS setup options: (example: SATA should be set as "native", "AHCI"; Processor - set EIST to "disabled") None

Audio: Works out of the box? Yes If not, list patches. N/A

LAN: Yes Works out of the box? If not, list patches. N/A

SATA & IDE: Yes Works out of the box? If not, list patches. N/A

 

Processor

Processor Model: Intel Pentium 4 650 Processor Prescott 3.4GHz, 800MHz FSB, Socket 775, 2MB Cache Retail

Speed: 3.4 GHz

Recognized as what in System Profiler: 3.4 GHz Unknown

 

Video Card (if you have integrated and PCI/AGP, use this template twice)

What type of card (PCI Express/AGP/Integrated): PCI Express

NVIDIA/ATI/Intel? NVIDIA

Model: GeForce 8500 GT

Memory: 512MB

Board Manufacturer: PNY

Patches used: NVinstaller v5.2

QE/CI: Yes

All resolutions available? Yes

 

Other Accessories (USB/FIREWIRE)

Type (Webcam, External Sound Card, USB bluetooth dongle, etc.):

Name: microVideo DV200 IEEE-1394/DV board

Manufacturer: Pinnacle Systems

Works? (Y/N, if "Y", list patches, if needed) Y

Patches/Work out of the box? No patches required

 

Complete hardware list:

 

CPU (including Memory, Case, P/S, Keyboard, Mouse):

* Intel BOXD915PCYL 915P P4 800FSB LGA775 DDR2 ATX Motherboard w/Audio, LAN, Serial ATA

* Intel Pentium 4 650 Processor Prescott 3.4GHz, 800MHz FSB, Socket 775, 2MB Cache Retail

* 2 x Kingston HyperX KHX4300D2K2/1G 1GB Kit DDR2-533 PC2-4300 Memory w/Heat Spreader

* Antec SU-430 430W P/S

* Antec NeoPower 480W Power Supply

* Antec New Solution Series NSK6500 Super Mid Tower Case

Cooling:

- Intel stock CPU Heatsink/Fan

- 1 x Zalman ZM-F3 120mm Quiet Fan (for case cooling)

- 2 x Zalman ZM-F2 92mm QuietFan (for drive cooling)

* Microsoft Wireless Desktop Pro Keyboard and Wireless Optical Mouse

 

Storage:

* Samsung 1.44 MB 3.5" floppy disk drive, black

* Maxtor DiamondMax 10 6L300S0 300GB Serial ATA (1.5Gb/s) 7200RPM Hard Drive w/16MB Buffer

* Western Digital WD5000CSRTL Caviar 500GB Internal Hard Drive

* Sony CRX320EBK DVD 16x + CD-RW 52x24x52 Combo Drive w/Software (Black)

* Sony DRU-800A Internal Double/Dual Layer & Dual Format DVD Burner

- Vantec ATA66/100/133 IDE 24in Round Cable w/Red PVC Pipe 3 Connectors

 

Audio/Video:

* PNY GeForce 8500 GT 512MB PCIe w/Dual Link DVI

* Dell 24 inch UltraSharp 2407FPW Widescreen Digital Flat Panel

* Onboard audio

 

Misc. Devices:

* Pinnacle Systems microVideo DV200 IEEE-1394/DV board

[yerbastian]

my Motherboard Asus p5n-D is supported For OSx86 10.5.2? or 10.5.1?

 

im have a 7300 GS in video

[TomAngel]

Laptop

 

Manufacturer: Acer

Model: Extensa 5220-301G08

 

Install Methods summary: Kalyway 10.5.2. Intel/AMD

 

partitioned as MBR, EFI v8 + Vanilla Kernel

 

Motherboard

Manufacturer: Acer

Motherboard Model: Unknown

Chipset: Intel 955

BIOS Version: Latest on 10.08.2008

BIOS setup options: SATA should be set as IDE Emulated

Audio: Works with ALC268FIX from this Forum including Phones and Mic. Jacks

LAN: Broadcom GBitLAN unchecked

SATA: Works out of the box

 

Processor

Processor Model: Intel Celeron M560

Speed: 2,13 GHz, FSB 533, 1MB L2 Cache

Recognized as what in System Profiler: Intel Core Solo 2,13 GHz

 

Video Card

What type of card (PCI Express/AGP/Integrated): Integrated

NVIDIA/ATI/Intel : Intel

Model: GMA X3100

Memory: up to 144MB shared

Patches used: Works out of the Box without QE/CI

QE/CI: Hardware acellerated after Leopard Graphics Update from Apple

All resolutions available?: Native Flatscreen Resolution 1280x800 by default

 

Other Components

 

Integrated Wireless Card: Broadcom DevID x4315 802.11b/g

Patches: works with broadcom_enabler script from Kalyway DVD after adding deviceID to the script.

First you have to install Leopard Graphics Update.

Reboot!

Next install Airport Utility from Apple.

Reboot!

Now you can run the broadcom script in Terminal as Root.

Fix Permissions with Diskutility

type in Terminal: touch /System/Library/Extensions

Wait until your HDD has done it's work (2-3 Min.)

Reboot!

Now it should run...

 

Integrated CardBus: TIxx12 Bridge

Works: Not out of the Box

Patches: works with PCCard.10.5.2.beta3 Installerpackage below. But Card has to be inserted before Boot. Plug and Play seems not to work if it is inserted later. But may also depend on my used Card.

 

Integrated ExpressCard Slot: TIxx12 Bridge

Works: Untested but probably works too due to funcionality of CardBus Slot

 

Integrated Cardreader: TIxx12 Bridge

Works: Untested but probably works too due to funcionality of CardBus Slot

 

Integrated Firewire/400: Works out of the Box

 

!!!! Hardware Keys for Volume and Display Light work out of the Box !!!!!

 

Works like a charm for only 380€ !!!!!!!!!!!!!!!

 

Extremely cheap 15,4" MacBook :D :D :D :D

 

 

PCCard.10.5.2.beta3.zip

[kroviken]

Current OS X Version: 10.5.2

Install method: Leo4All v3

 

Type: Desktop

CPU: Intel Pentium D 2.80GHz

Memory/DDR: 3GB (3x1GB DDRII 667MHz)

 

Motherboard Chipset: Intel® 945G Express Chipset

SATA: Work, no patches required

USB: Work, no patches required

Audio: Not working

LAN: Detected, but not tested yet

WiFi: None

Bluetooth: None

FireWire: Work, no patches required

Express Card: None

 

Video Primary:

Manufacturer: nVIDIA

Model: ATI Radeon x1650 (1st try...working perfectly with QE/CI, but the card broke after restart );GeForce 7200GS (2nd try...working perfectly with QE/CI); 8400GS (3rd try...working perfectly with QE/CI); ATI Radeon X300SE (4th try...working but only CI,mouse tearing)

Bus Type: All PCIe x16

Memory size: 256Mb (nVidia); 128Mb (ATI X300); 256Mb (ATI x1650)

QE/CI working: Only after installing NVinject for nVidia and info.plist editing; ATI X1650 using default installer; ATI X300SE using installer from forumers (not remember)

Resolution changeable: Yes (1440x1024x32 max)

Video Secondary: None

[thirdshiftdj]

Current OS X Version: Kalyway 10.5.2

 

Desktop/Laptop? Desktop

 

Prebuilt? (Y/N) N

(If prebuilt then add following information, otherwise fill the Motherboard:)

Manufacturer: (example Dell?)

Model: (example Inspiron xxx?)

 

Install Methods summary: (List all methods tested, check preferred method - the one you are writing about now)

@ start options, I typed -v -x. DID NOT install graphics,audio drivers. Used default kernel because I was getting kernel panic w/ restart. It was probably the drivers that were causing it and not the kernel but I have not tested any further.

 

Does EFI and/or the Vanilla kernel work? (example: partitioned as MBR, EFI v8 + Vanilla Kernel) EFI, have not tried Vanilla kernel w/out graphics driver (which was causing kernel panic)but I don't see why it wouldn't work

 

(in following sections, if you don't know or not sure, write "unknown")

Motherboard

Manufacturer: Asus

Motherboard Model: Maximus Formula

Chipset: X38

BIOS Version: , Revision: 0403 Rampage Formula bios

BIOS setup options: (example: SATA should be set as "native", "AHCI"; Processor - set EIST to "disabled") AHCI, Disabled everything in Cpu configuration

Audio: Works out of the box? If not, list patches. Used Edirol UA-25, no need for audio drivers

LAN: Works out of the box? If not, list patches. Yes

SATA & IDE: Works out of the box? If not, list patches. Yes

 

Processor

Processor Model: Q6600

Speed: 2.4GHZ

Recognized as what in System Profiler: Q6600

 

Video Card (if you have integrated and PCI/AGP, use this template twice)

What type of card (PCI Express/AGP/Integrated): PCI-E

NVIDIA/ATI/Intel? ATI

Model:HD 3870 X2

Memory: 512MB X 2

Board Manufacturer: ATI Reference

Patches used: None

QE/CI: No

All resolutions available? No

 

Other PCI/PCI-e Components (USB are listed in Other Accessories below)

Wireless/Wired Card (for PCI/PCI-e cards only) NONE

Interface: PCI/PCI-e?

Standard (Wireless only): (example: 801n)

Manufacturer:

Model:

Works? (Y/N, if "Y", list patches)

Patches:

 

Sound Card (this is for PCI/PCI-e cards only - integrated on motherboard is in motherboard section)

Interface: PCI/PCI-e? NONE

Manufacturer:

Model:

Works? (Y/N, if "Y", list patches)

Patches:

 

Other Accessories (USB/FIREWIRE)

Type (Webcam, External Sound Card, USB bluetooth dongle, etc.):

Name: Audio interface usb

Manufacturer: Edirol

Works? (Y/N, if "Y", list patches, if needed) Y

Patches/Work out of the box? No patches just DL driver from Edirol

[Firerose]

Current OS X Version: 10.5.2

 

Desktop

 

Prebuilt? N

 

Install Methods summary:

Kalyway 10.5.2 EFI v8

-Leo4All 10.5.2

 

Does EFI and/or the Vanilla kernel work? Unknown

 

 

Motherboard

Manufacturer: Intel

Motherboard Model: D865GBF

Chipset:

BIOS Version: , Revision:

BIOS setup options:

Audio: Yes, OOB

LAN: Yes, OOB

SATA & IDE: IDE yes, OOB; SATA unknown

 

Processor

Processor Model: Intel Celeron D 340

Speed: 2.93GHz

Recognized as what in System Profiler: 2.93 GHz Unknown

 

Video Card

What type of card (PCI Express/AGP/Integrated):AGP

NVIDIA

Model: 6200

Memory: 256 MB

Board Manufacturer: eVGA

Patches used:

QE/CI:

All resolutions available? No

 

Sound Card

Interface: PCI/PCI-e? PCI

Manufacturer: Creative

Model: Audigy 2

Works? (Y/N, if "Y", list patches) N

Patches:

 

 

I'm not sure of everything just yet I will update this post as I figure out the rest of the information.

[wammy28]

Current OS X Version: Kalyway 10.5.2

 

Desktop/Laptop? Desktop

 

Prebuilt? (Y/N) N

(If prebuilt then add following information, otherwise fill the Motherboard:)

Manufacturer: (example Dell?)

Model: (example Inspiron xxx?)

 

Install Methods summary: (List all methods tested, check preferred method - the one you are writing about now)

@ start options, I typed -v DID NOT install graphics. Used 9.2 vanilla kernel because I was getting kernel panic w/ restart. My Asus 8600GT was a source of this problem.

 

Does EFI and/or the Vanilla kernel work? (example: partitioned as MBR, EFI v8 + Vanilla Kernel)

Work.

(in following sections, if you don't know or not sure, write "unknown")

Motherboard

Manufacturer: Asus

Motherboard Model: P5Q-E

Chipset: P45

BIOS Version: , Revision: ASUS P5Q-E 803 Mod bios

BIOS setup options: (example: SATA should be set as "native", "AHCI"; Processor - set EIST to "disabled") AHCI, boot from DVD

Audio: Works out of the box? If not, list patches. ADI AD200B audio codec (working with AppleAzaliaAudio.kext patch)

LAN: Works out of the box? If not, list patches. Yes

SATA & IDE: Works out of the box? If not, list patches. Yes

 

Processor

Processor Model: Q6600

Speed: 2.4GHZ

Recognized as what in System Profiler: Unkonown

 

Video Card (if you have integrated and PCI/AGP, use this template twice)

What type of card (PCI Express/AGP/Integrated): PCI-E

NVIDIA/ATI/Intel? NVIDIA

Model:ASUS en8500GT silent

Memory: 256 MB

Board Manufacturer: ASUS

Patches used: Yes

QE/CI: No

All resolutions available? Yes

 

Other PCI/PCI-e Components (USB are listed in Other Accessories below)

Wireless/Wired Card (for PCI/PCI-e cards only) NONE

Interface: PCI/PCI-e?

Standard (Wireless only): (example: 801n)

Manufacturer:

Model:

Works? (Y/N, if "Y", list patches)

Patches:

 

Sound Card (this is for PCI/PCI-e cards only - integrated on motherboard is in motherboard section)

Interface: PCI/PCI-e? NONE

Manufacturer:

Model:

Works? (Y/N, if "Y", list patches)

Patches:

 

Other Accessories (USB/FIREWIRE)

Type (Webcam, External Sound Card, USB bluetooth dongle, etc.):

Name: Audio interface usb

Manufacturer: Edirol

Works? (Y/N, if "Y", list patches, if needed) Y

Patches/Work out of the box? No patches just DL driver from Edirol

[Dlited]

Current OS X Version: 10.5.4

 

Desktop

MSI P35 Platinum (MS-7345)

 

Install Methods summary:

Installed modded bios (flash with Kaliway's modded Firmware from osrom.net)

Installed Kaliway 10.5.2

Installed Kaliway ComboUpdate 10.5.3 (selected the modbin kernel 9.3)

Normal AppleUpdate 10.5.4

Does EFI and/or the Vanilla kernel work? EFI works Vanilla does not.

 

Motherboard

Manufacturer:MSI

Motherboard Model:Platinum MS-7345

Chipset:p35

BIOS Version: 1.8 (modded)

BIOS setup options: not changed after flash (so default)

Audio: Out of the box.

LAN: Out of the box.

SATA: Out of the box. IDE: unknown.

 

Processor

Processor Model: Q6600

Speed: 2.40 GHz

Recognized as what in System Profiler: 2.40 GHz, Processors:1, Cores:4, L2 Cache:4 MB

 

Video Card

What type of card: NVIDIA

Model:8600 GT

Memory:256MB

Board Manufacturer:Gigabyte

Patches used: none

QE/CI: Both supported (after installing NVinstaller .52 (selected vanilla))

All resolutions available? Yes

 

Other Accessories

USB/FIREWIRE: both work.(Firewire needs to be enabled AFTER install OS)

 

Type: USB Wireless dongle g54

Name: WL 113 v 1.002

Manufacturer: Sitecom

Works: Y, need Ralink drivers from sitecom website.

 

Type: Firewire external HDD

Name: D2 Quadra

Manufacturer: LaCie

Works: Y

[OS-HP-X]

OS X Version: Mac OS X Leopard 10.5.2

Desktop

 

Prebuilt? Yes

Manufacturer: Hewlett-Packard

Model: Pavilion a6282l

Install Methods summary:

Kalyway 10.5.2 DVD

Does EFI and/or the Vanilla kernel work?

Work with EFI V8/Vanilla

 

Motherboard

Manufacturer: Asus

Motherboard Model: IPIBL-LA

Chipset: Intel G33/ICH9R

BIOS Version: , Revision: v5.08

BIOS setup options: Setup Defaults

Audio: Realtek ALC888s works with 2.1 CH/Mic/Headphone/Line in/Digital Need AppleHDA Patcher http://forum.insanelymac.com/index.php?showtopic=32859

Lan: Intel 82566 DC-2 Gigabit Doesn't work

IDE+AHCI work

 

Processor

Intel Core 2 Duo E4500

Speed: 2.2 Ghz

Recognized as what in System Profiler: Intel Core 2 Duo

 

Video

What type of card (PCI Express/AGP/Integrated): Integrated

NVIDIA/ATI/Intel: Intel

Model: GMA 3100

Memory: Depend on usage

Board Manufacturer: On-Board

Patches used: NO

QE/CI: No QE/CI

All resolutions available? NO

 

What type of card (PCI Express/AGP/Integrated): PCI Express

NVIDIA/ATI/Intel: Nvidia

Model: Geforce 7500LE

Memory: 320 Mb

Board Manufacturer: Micro-Star Internatinal (MSI)

Patches used: NVInject

QE/CI: Yes

All resolutions available? Yes

 

Other:

PCI: Realtek RTL8139 Lan works...

Sleep works

 

Can you provide details about what flags you used? There are many people (including myself) having problems with this set-up.

Thanks!

[nli]

Current OS X Version: Leo4Allv2 10.5.2

 

Desktop

 

Prebuilt.

 

Manufacturer: HP

Model: Pavilion a6110n

 

Install Methods summary: (List all methods tested, check preferred method - the one you are writing about now)

• JaS 10.4.8 AMD/Intel/SSE2/SSE3 (wouldn't work with my nforce sata controller)
  
• Kalyway Intel/AMD/SSE2/SSE3 10.5.2 (wouldn't read from my dvd)
  
• Leo4Allv2 (10.5.2) <-preferred, current version
  

Does EFI and/or the Vanilla kernel work? Partitioned as MBR, haven't tried EFI; not using the Vanilla kernel

 

(in following sections, if you don't know or not sure, write "unknown")

Motherboard: Unknown

Manufacturer: Unknown

Motherboard Model: Unknown

Chipset: Unknown

BIOS Version: Unknown

BIOS setup options: "USB legacy" should be disabled (otherwise keyboard and mouse don't work)

Audio: Works out of the box? No -using the Azalia patch (and only have one output instead of 4 or 5)

LAN: No -tried forcedeth and it didn't work. Installed an realtek 8169 card instead.

SATA & IDE: Works out of the box? No. Using the nforce-testing patch included on the dvd.

 

Processor:AMD

Processor Model: AMD Athlon 64 X2

Speed: 2.3GHz

Recognized as what in System Profiler:AMD Athlon 64 X2 Dual Core Processor 4400+

 

Video Card (if you have integrated and PCI/AGP, use this template twice)

What type of card (PCI Express/AGP/Integrated): Integrated

NVIDIA/ATI/Intel: NVIDIA

Model: 6150SE

Memory: 128megs

Board Manufacturer:Unknown

Patches used: NVinject 128-meg

QE/CI:

All resolutions available? I can specify a 1280x1024 resolution at boot time.

 

Other:

PCI:Realtek 8139 ethernet (works OTB but using the PCGenRTL8139Ethernet-1.2.0 patch to get rid of Tx errors and dropped packets)

[Fragilem64]

Current OS X Version: JAS 10.5.4 client server

 

Model:

Desktop,custom made

 

Install Methods summary: (List all methods tested, check preferred method - the one you are writing about now)

 

* Kalyway Intel/AMD/SSE2/SSE3 10.5.2 (waiting for root device error, this was before my biosupdate from 1.1 to version 1.5) I also had to replace the ACPI kexts to get by the 'Using 16384 buffer headers...' error.

* JaS 10.5.4 Client server<-PREFFERED

Does EFI and/or the Vanilla kernel work? using Mach kernel. Vanilla tested, I think the JAS installation uses the ChameleonEFI.

 

Motherboard:

Manufacturer: MSI

Motherboard Model: P45 NEO

Chipset: P45 northbridge + ICH10 southbridge(curently not recognized)

BIOS Version: 1.5 (latest available)

BIOS setup options:

Audio: Works out of the box? ALC888:not out of the box but with applehda alc888 kext and hdaenabler.

LAN: Out of the box.

SATA & IDE: Out of the box, installed on IDE drive. Installaion on sata not tested yet but I can see the disk in Disk utilty and in OS X when it is installed on the IDE drive.

Processor:

Processor Model: Intel Q6700

Speed: 3.33GHz

Recognized as what in System Profiler: Not properly recognized, I have to use cpus=1 to boot and it uses only one core.

 

Video Card:

What type of card (PCI Express/AGP/Integrated): PCI Express

NVIDIA/ATI/Intel: ATI

Model: 4870

Memory: 512megs

Board Manufacturer:Sapphire

Patches used: None, waiting for driver

QE/CI: no

All resolutions available? I can specify what I want with the VESA 3 driver but no widescreen(1680x1050)

[Tobias6]

OS X: 10.5.2

Zephyroth rev2, standard install, few post-install patches.

MBR boot, journaled partition.

Customize with ToH 9.2 kernel, sata, nforce4, LAN and audio drivers.

Installed straight onto Nvidia-sata srive.

 

ASUS A8N-SLI PREMIUM

CHIPSET: NFORCE 4

BIOS: ? stock

BIOS settings: nothing special, OCed a little...

AUDIO: AC'885 (onboard) with AC'97 driver (on disc, so o.o.

LAN: Marvell Yukon and Nforce both o.o.b with forcedeth and nvidia respectively.

SATA and IDE: Same, oob with correct options.

 

CPU: AMD64 X2 4400+ (toledo?)

2.5ghz (oced)

Profiler: "MAC system product name AMD64" blah blah .. funny, no?

 

VIDEO: Nvidia BFG 8800gt 512mb

QE/CI, all reso.: Yes

Patch: latest NVinstaller + efi macgirl strings auto installed.

 

-T