Jump to content


  • Content Count

  • Joined

  • Last visited

About AzN_DJ

  • Rank
    InsanelyMac Protégé
  1. AzN_DJ

    Where are SSH host keys located?

    Ok I have found the answer: All the SSH keys are stored under: /etc/ Why didn't I think of that earlier? so ssh_host_dsa_key etc are located there. (I'll put this up for those linux users here)
  2. AzN_DJ

    Where are SSH host keys located?

    ~/.ssh/known_hosts is stored on the client side, and is what is used to authenticate each time. Deleting the known hosts file on the client side isn't exactly the long-term solution I would be looking for, because that has to be done on every computer I ssh from. The idea is that I am ssh-ing TO the dual boot Mac/Linux computer, and the ssh host key. Hence the private keys need to be identical. On linux, they are stored under /etc/ssh as ssh_host_dsa_key, ssh_host_ecdsa_key, ssh_host_rsa_key (and the equivalent public keys). On Mac? No idea.
  3. Hi there, I have decided to put a little bit of advice on this idea - how to keep all your files in once place, across all your OSes. This generally has to be a planned choice before you set up your computer: working through this in retrospect can be quite a pain in the neck. The technique here is to use a common partition for everything: Your Documents, Music, Videos, Pictures, etc. Step 1 - Partition your hard drive correctly To have a common partition for all your files, it has to be accessible to all your OSes. This means in the first three partitions of a GPT/GUID formatted hard drive (if you install Windows using UEFI, then you can put it anywhere. However, I would still recommend to keep it at the start of the drive just in case). You also need to ensure that your hard drive is the right format. NTFS will make it read-only by default on Mac and Linux, and generally only be read-write from Windows (yes, there are ways around it, but this is more tricky). HFS+ requires a commercial solution for Windows called MacDrive, and for Linux, it is read-only when the drive is journaled. Ext2/3/4 is generally difficult to set up on Windows and Mac. FAT also has a limitation to maximum file size, and has issues when you create a partition over 32GB. Hence, my personal recommendation is that you format a large partition as exFAT near the start of your hard drive. This can be done in Disk Utility, or if you make a FAT partition, you can then format it later in Windows to exFAT. Step 2 - Configuring your OSes to use the drive Mac and Windows will be able to detect your partition and mount it automatically. Linux? Not immediately. Also, you want to make sure saving things are as easy as possible. I am not an advocate for storing {censored} loads of stuff to the desktop, and I keep things in Documents, Videos, Music, Pictures, Downloads, etc. I will walk through how to make sure that everything works the way you want. ASSUMPTIONS I am assuming first of all that: the partition is the second one on your first hard drive (after EFI boot): On linux, it will be sda2. On mac it will be disk0s2. I am also calling the drive common : you can call it whatever you want. On our exFAT partition, I suggest making it look like this: A folder for your user Folders in that folder of: Documents Downloads Music Pictures Videos Linux exFAT by default is not installed on linux. No problem however, we can easily fix that. Open up a terminal and type in: sudo apt-get install exfat-fuse exfat-utils If it doesnt exist, and you are using ubuntu, try this: sudo apt-add-repository ppa:relan/exfat sudo apt-get update sudo apt-get install exfat-fuse exfat-utils This will allow you to mount exFAT partitions. Second thing we need is to make sure it mounts on boot. In your terminal, sudo nano /etc/fstab (or use your favourite editor) and put this line at the bottom: /dev/sda2 /common exfat rw,async,umask=0 0 0 (Again, check the assumptions bit I put. Change each bit that is different for you in this line, otherwise it won't work). Make your folder and mount it: sudo mkdir /common mount /common and viola - your common partition is ready in linux. Mapping your folders. This is for convenience purposes - so when you save your files, they will all be in the same place.   cd rm -rf Documents Downloads Music Pictures Videos (NOTE: PLEASE MAKE SURE THESE FOLDERS ARE EMPTY FIRST! I am not taking responsibility for lost data) (Please check your files first) ln -s /common/<your user here>/Documents ln -s /common/<your user here>/Downloads ln -s /common/<your user here>/Music ln -s /common/<your user here>/Pictures ln -s /common/<your user here>/Videos Now in your home directory, all those folders will link to the common drive on boot. Windows Thankfully Windows will recognise exFAT on boot, and assign it a letter name. All you have to do in this instance is to go through your Windows Libraries in My Computer, and map everything to the drive. If things don't work, you can use this tool here: http://zornsoftware.codenature.info/?page_id=37&did=2 For Windows 8, it does things a bit differently (do the above as well). Open up My Computer, and see the list of folders. You can right click on them, go to properties, and change the paths one by one. Mac Similar to linux, but the partition should auto mount. cd cd rm -rf Documents Downloads Music Pictures Videos (NOTE: PLEASE MAKE SURE THESE FOLDERS ARE EMPTY FIRST! I am not taking responsibility for lost data) (Please check your files first) ln -s /Volumes/common/<your user here>/Documents ln -s /Volumes/common/<your user here>/Downloads ln -s /Volumes/common/<your user here>/Music ln -s /Volumes/common/<your user here>/Pictures ln -s /Volumes/common/<your user here>/Videos Other Notes For your web browsers, I suggest manually changing the download location to your common drive. Occasionally, I have had to scan the exFAT partition on windows manually for errors, but hopefully your experiences should be better. Happy multi-booting
  4. Hi there, This is mainly an issue of a multi boot system: When you have people ssh-ing into your computer, but you are running different operating systems, the ssh host keys are mismatched. As known_hosts are kept on the client, being being mismatched will end up with a rejected connection claiming that you could be the victim of a man in the middle attack (and because it is my computer and I know what I am doing, I can assure that is not the case). The solution to this is to make sure that the ssh host keys are identical from OS to OS. However, I don't know where they are stored in OS X. Would anyone know where to find them? (Also using Yosemite - shouldn't make a difference though)
  5. Getting this message when I start vmware on Lion, from my native Windows 7 installation: Operation on file "/dev/rdisk0s2" failed. If the file resides on a remote file system, please make sure your network connection and the server where this disk resides are functioning properly. If the file resides on removable media, reattach the media. Choose Retry to attempt the operation again. Choose Abort to terminate this session. Choose Continue to forward the error to the guest operating system. Anyone having a similar problem, and/or a solution? H/W specs: Intel Core2Quad Q6600 4GB DDR2 Ram Nvidia 9400GT - Natit.kext Atheros Ethernet - AttansicL1eEthernet.kext VoodooHDA.kext Chameleon RC4 OSX version: 10.7 GM
  6. So far It is happening with FaceTime and VMware Fusion. Anybody else having this issue? And what can I give to you guys to diagnose this issue? Mainboard: Asus P5KPL-CM Ram: 4GB DDR2 CPU: Intel Core2quad 2.4GHZ Graphics: NVIDIA 9400GT
  7. AzN_DJ

    iOS 4 on other ARM v7 based devices

    The processor is manufactured by Samsung, which would make..... The Galaxy S a perfect candidate for our little project. Who would bother putting OS X on a PC? This is a challenge! This is proof of concept! This is to delay the release of the iphone 5! (lol) Maybe we should start a community project to see if it is actually possible. The IPSW is easy to download and unpack, we just have to look at the components, and see if we can get a port. It wont be easy, but once we do it for the first time, we can do it again. And again.
  8. I just got a wireless keyboard as well, but I cant use it at boot, so Im stuck with using Snow Leopard. Is there any way I can get the keyboard to work at boot? Even by passing a driver or something through to Chameleon? Thanks. AzN_DJ
  9. AzN_DJ

    10.6.2 WindowServer Kernel Panic

    Ahh Thanks dnine for that. I went out and bought a 9400GT yesterday and now am booting into 64-bit mode. However, I couldn't find an EFI string and am using NVEnabler.kext which is doing the job, but I'd rather an EFI string.
  10. AzN_DJ

    10.6.2 WindowServer Kernel Panic

    I am having a similar issue with 7600GS. Can anyone confirm what graphics card have problems, and which ones won't?
  11. So...... in other words, I need a new graphics card? Woohoo! Now I have an excuse for my parents to get me one. Bwahaha. What graphics cards would be fine under 10.6.2 64-bit? And How come its only broken under 10.6.2? Oh and scififan68 - what exactly is the file you posted??
  12. Hi. I am having issues with 10.6.2, and I originally didn't have this problem with 10.6.1, and it seems to only happen with 64-bit Snow Leopard. For some reason, as soon as I log into my system, it crashes, and looks like it is the WindowServer that crashes. Has anyone else had any similar issues, or would be able to shed light on this one? My system configuration: Intel Core2Quad Q6600 (2.4Ghz) 4096MB ram DDR2 ASUS P5KPL-CM motherboard nVidia GeForce 6800GS 256mb Originally, I tried an EFI string for graphics, but had the problem, so tried Natit instead, and still comes up with the same problem. Is that enough information?
  13. Issue is dsmos. Use Fakesmc instead, and delete the dsmos kext.
  14. AzN_DJ

    3 PC's, 1 Retail Snow Leopard Disc

    Your second system would be your easiest option..... 1. MSI Wind - the problem is with upgrading to 10.6.2, you will need a patched kernel. The same applies to your AMD system, as you are running AMD and you would need a modbin kernel. You can do the MSI Wind not being so hard, as it is well documented, but its the kernel that has the problem and you will have to find a modded kernel before installing 10.6.2 - but can you really use a hackintosh well on such an underpowered pc and a small screen?
  15. Could you do us a favour and type in -v at the Chameleon prompt, then enter and then take a photo because I cant see past the big grey power button. Most likely you are missing a few kexts and/or do not have permissions set right.