Jump to content

AudioGod's Aorus Z390 Pro Patched DSDT Mini Guide and Discussion

AudioGod

By AudioGod,
in Installation Guides

 Share
5539 posts in this topic

Recommended Posts

freakermonguer
freakermonguer
Posted
Posted

I have this exact build.

 

Before doing any upgrade, in this case from Catalina to Big Sur I always make a full backup copy of my drive onto another one with SuperDuper!. 

 

I NEVER EVER had a problem with this before Catalina. I always did my copy, and it always worked.

 

This time something is happening. When I try to boot from the copied drive the Hakcintosh powers off....

 

Looking at the verbose log I have no clue of whats happening... I hope that somebody could help me with this.... 

 

Why the computer is rebooting? What is disliking in the copy of the disk?

 

IMG_20210425_213454.thumb.jpeg.3b1478430cc37149b703dbfe9e49c4fa.jpeg

 
 

IMG_20210425_213303.thumb.jpeg.3e1f15b6e4e83b9560005dffb2cf2f4f.jpeg

 

panosru
panosru
Posted
Posted (edited)

No issues with 11.3 on my side, everything works perfectly fine. Make sure that your EFI matches the one @AudioGod provided and don't forget to reset your NVRAM.

Edited by panosru
  • Like 1
AudioGod
AudioGod
Posted
  • Author
Posted
58 minutes ago, n19htz said:

had to roll back to 11.2.1 and everything works, but 11.3 causing problems with wi-fi and sometimes hack is freezing during even update

Have you reset your NVRam?

That should stop the freezing and what WiFi card are you using with what kexts connected to it?

AudioGod
AudioGod
Posted
  • Author
Posted
11 minutes ago, n19htz said:

yeah, nvram reseted, using fenvi without any kext attached to it

Fenvi T919?

if so then your going to need BrcmPatchRAM adding to it and Airportfixup

https://github.com/acidanthera/BrcmPatchRAM/releases
 

Stupid Fanvi cards, I hate them….lol

  • Haha 1
n19htz
n19htz
Posted
Posted
10 hours ago, AudioGod said:

Fenvi T919?

if so then your going to need BrcmPatchRAM adding to it and Airportfixup

https://github.com/acidanthera/BrcmPatchRAM/releases
 

Stupid Fanvi cards, I hate them….lol

isnt fenvi is like native broadcom chip? I mean everything works with fenvi natively including handoff, continuety etc without any kext installed and I never had a problem b4 11.3 with wifi/bluethooth

letsdrink
letsdrink
Posted
Posted (edited)

Something is going wrong when I try to update to 11.3 from 11.2.3.

9900KS / Z390 PRO, OpenCore v0.6.8, SMBios iMac19,1.

 

Just as usual I'am trying to update from the Software Update. 

 

What's going on:
1. The update is downloaded
2. Computer reboots
3. A new system boot option appears. 
4. A screen appears with a black background, the apple logo, and a progress bar.
5. At about 80 percent of progress, a prompt to enter my password appears.
6. I enter my password and the system boots up to version 11.2.3.

Never had this problem before. 

 

SIP is enabled.

 

Update: deleting all disk snapshots, booting from recovery, checking the disk with the Disk Utility, csrutil reset, allowing the machine to autoselect boot disk solved the problem

Edited by letsdrink
solved
AudioGod
AudioGod
Posted
  • Author
Posted (edited)
14 hours ago, n19htz said:

isnt fenvi is like native broadcom chip? I mean everything works with fenvi natively including handoff, continuety etc without any kext installed and I never had a problem b4 11.3 with wifi/bluethooth

Fenvi is a make and they produce clones of the original cards. I’ve never liked them and if I was to give you a number of how many times people have had problems with them it would be in the high 100s. This is why I am not a fan of them and don’t endorse them. Especially the T919. 
 

 

38 minutes ago, letsdrink said:

Something is going wrong when I try to update to 11.3 from 11.2.3.

9900KS / Z390 PRO, OpenCore v0.6.8, SMBios iMac19,1.

 

Just as usual I'am trying to update from the Software Update. 

 

What's going on:
1. The update is downloaded
2. Computer reboots
3. A new system boot option appears. 
4. A screen appears with a black background, the apple logo, and a progress bar.
5. At about 80 percent of progress, a prompt to enter my password appears.
6. I enter my password and the system boots up to version 11.2.3.

Never had this problem before. 

 

SIP is enabled.

Sounds like a problem with your general install fella,

you could try running a disk repair or disabling sip and or disabling the SecureBootModel and see if it helps but I have a feeling that you would be better off just doing a TM backup of your system if you don’t have one already and then fresh installing 11.3 and then recovering your backup.

 

That’s Always a good thing to do now and again anyway. :) 

Edited by AudioGod
n19htz
n19htz
Posted
Posted
11 minutes ago, AudioGod said:

Fenvi is a make and they produce clones of the original cards. I’ve never liked them and if I was to give you a number of how many times people have had problems with them it would be in the high 100s. This is why I am not a fan of them and don’t endorse them. Especially the T919. 

But do i need those kext? And if so could you help me please with them, I dont getting wich ones I actually need?

juan e. jot
juan e. jot
Posted
Posted (edited)

Just did my first build from source of the OpenCorePkg-master folder, because after I updated to 11.3, macOS expected (but ran fine without) a new iMac19,1 firmware version, that acidanthera had updated to emulate in the latest 069 build. Not wanting to wait (and having backed everything up, in case of borkage), I built 069, ported over anything new to my EFI & while I needed to update my config.plist "CustomDelays" field from string to boolean and set it at as false (just as a quick nag on bootup; not preventing bootup), it seems to work fine for basic (not heavily tested) use.

 

I'll look forward (and update) to AG's 069 Aorus Z390 Pro/WiFi update in May, should he choose to provide it, because something tells me he'll be more thorough than I was with really scouring Differences.pdf for helpful/necessary changes to config.plist settings. I kinda wonder, for example, whether the new Quirks Property "EnableVectorAcceleration" is going to be at all salient to performance with what any of us do with Coffee Lake gen 8/9 processors. Won't put them in M1 speed/power consumption territory, in any event… :P

More practically, I wonder whether any of the audio changes will affect Music DRM; I’ve only tried with this updated EFI since 11.3, but stations seem to have trouble playing while songs on playlists do not have such trouble.

UPDATE: I've tried it with my old 068 EFI, then the new (pre)069 EFI, and now stations work again; must have been an intermittent server issue. Never mind.

 

 

Edited by juan e. jot
Removed audio concern.
  • Like 1
panosru
panosru
Posted
Posted (edited)

Hello!

 

Could someone help me configure wake on lan? I'm trying to do some home automation and my goal is to be able to power up my computer remotely (from within the home network though).

 

I have enabled wake on lan in two places in BIOS, I checked "Wake for Ethernet network access" from System Preferences -> Energy Saver, I have also run "sudo pmset -a networkoversleep 1", I'm not sure if I have to change /System/Library/LaunchDaemons/com.apple.mDNSResponder.plist from: 

  <array>
    <string>/usr/sbin/mDNSResponder</string>
  </array>

to: 

    <array>
        <string>/usr/sbin/mDNSResponder</string>
        <string>-UseInternalSleepProxy</string>
        <string>0</string>
    </array>

I haven't done that part yet as I'm not sure what it does exactly.

 

Also previously I applied the  SSDT-GPRW patch (which I like that I only can wake up my computer from power button), could it be that it also prevents wake on lan when the computer is powered off?

 

Thanks!

 

UPDATE:

I removed the patch, and the wake on lan works from sleep, but not when the pc is powered off :/

 

UPDATE2:

I found this kext IntelMausi-WOL, and it enables WOL for macOS, I'm not sure if anyone tried it before, I guess I replace InteliMausi with that kext to make it work?

 

UPDATE3:

I'm not sure why, but after I shut down my PC the power button wasn’t working; thus I could not turn it back on, it took me about an hour of troubleshooting and a couple of pants changing, once I turned it on, I reverted EVERYTHING back to as they were and about WOL, thanks, but no thanks! :D

Edited by panosru
AudioGod
AudioGod
Posted
  • Author
Posted
1 hour ago, Myfz said:

@AudioGod : Thanks for all your work on this! 

 

Very quick question before upgrading, Is MacOS Big Sur works well with the Clover update from April ? :-)

 

Have a nice weekend! :thumbsup_anim:

No, I stopped supporting Clover.

OpenCore only for BigSur via me I’m afraid.

the latest version of clover works fine with big sur but you will need to update my EFI to it to use the OS.

Go with OpenCore, you won’t regret it.

  • Like 1
AudioGod
AudioGod
Posted
  • Author
Posted (edited)

OpenCore 0.6.9 EFI Update (Big Sur 11.4 Ready), 3rd May 2021 

(Use With Bios Revision F12K or Newer)

 

 

The EFIs and DSDTs have now been updated to the my latest versions.

Changes made include,

  • Lilu 1.5.3,
  • AppleALC 1.6.0,
  • IntelMausi 1.0.6,
  • VirtualSMC 1.2.3,
  • OpenCore Updated to Revision 0.6.9 (Big Sur 11.4 Ready),
  • OpenCanopy is Enabled as Standard,
  • New OpenCanopy Icons,
  • Mouse now working in OpenCanopy,
  • Plus other minor tweaks and changes to all of the configs,

 

 

OpenCore EFI Update v0.6.9 - 03/05/2021

OC 069 19,1 Z390 Pro EFI.zip  - OpenCore v0.6.9, SMBios iMac19,1

OC 069 1,1 Z390 Pro EFI.zip - OpenCore v0.6.9, SMBios iMacPro1,1 (IGPU Disabled)

OC 069 19,1 Z390 Pro IGPU ONLY EFI.zip - OpenCore v0.6.9, SMBios iMac19, IGPU ONLY

  

Note - If your not using a 5700 XT or any other Navi GPU then remove agdpmod=pikera from the boot arguments.

 

Note 2 - Do not try to carry across your old OpenCore Config.plist to the new EFI as to many changes have occurred in 0.6.7. Use the new Config.plist instead.

 

For OpenCore Using PlistEdit Pro add your details by modifying the following 

1126595787_Screenshot2020-01-16at19_25_01.png.890a13d93c1ce4f42ee7dedb6d156e1e.thumb.png.b3ab8c747f2ed0d4697eaae541fcd843.png

 

 

Edited by AudioGod
  • Like 2
  • Thanks 5
juan e. jot
juan e. jot
Posted
Posted (edited)
1 hour ago, AudioGod said:

 

OpenCore 0.6.9 EFI Update (Big Sur 11.4 Ready), 3rd May 2021 

(Use With Bios Revision F12K or Newer)

 

 

[]

 

 

OpenCore EFI Update v0.6.9 - 03/05/2021

[] - OpenCore v0.6.9, SMBios iMac19,1

[] - OpenCore v0.6.9, SMBios iMacPro1,1 (IGPU Disabled)

OC 069 19,1 Z390 Pro IGPU ONLY EFI.zip - OpenCore v0.6.9, SMBios iMac19, IGPU ONLY

 

Wow! That was fast; I had literally JUST booted with my own tweaks to 069 final, and out you come with yours! I'm off to try it…

 

One minor question, though: are the top two just mis-labeled as Z390 Master, or have you merged the Z390 Master and Pro EFIs? Thanks!

Edited by juan e. jot
Delete attachments to wrong files at AG request
AudioGod
AudioGod
Posted
  • Author
Posted (edited)
4 hours ago, juan e. jot said:

Wow! That was fast; I had literally JUST booted with my own tweaks to 069 final, and out you come with yours! I'm off to try it…

 

One minor question, though: are the top two just mis-labeled as Z390 Master, or have you merged the Z390 Master and Pro EFIs? Thanks!

Oh {censored}, my mistake. Will fix that right now..lol

 

@juan e. jot All Fixed...lol (could you delete my attachments on your reply pointing out my mistake please bud?)

Edited by AudioGod
juan e. jot
juan e. jot
Posted
Posted (edited)
35 minutes ago, AudioGod said:

Oh {censored}, my mistake. Will fix that right now..lol

 

@juan e. jot All Fixed...lol (could you delete my attachments on your replay pointing out my mistake please bud?)

No worries, works like a charm!

 

Now to read the (publicly disclosed) entrails tea leaves of what the heck they changed for "security" in 11.3.1… Not lovin' that gibMacOS doesn't have it yet, but I suppose 11.3 is a good fallback, anyway. Now they do. :thumbsup_anim:

Edited by juan e. jot
less gross idiom & factual gibMacOS update
  • Like 1
AudioGod
AudioGod
Posted
  • Author
Posted
2 minutes ago, Blesh said:

Same here, AudioGod is OCGod :thumbsup_anim:

:hysterical: I’m far from it bud, I’m like a journalist, I know a little about everything and and a whole lot about nothing.


I should of been a physicist…  LOL

  • Like 1
  • Haha 2
 Share
Go to topic listing
×
×
  • Create New...