Billy Talent Posted June 23, 2006 Share Posted June 23, 2006 Hi there! Awsome!!!! I just installed 10.4.5 on my Dell Inspiron 710m (same as 700m)!!!I'm very happy, but: -I only get 16mb (vesa 3) of video ram in 1024*768 resolution, no QE. Intel 852/855 problem, I *think* there's no solution. -No sound though apparently there is a way to get the Dell sound working. -No wireless, though apparently there is a way to get the Dell wireless working. Any ideas? thanks!!! I'm trying to install on my 700m. Anyway, installation went good, but when I try to boot OSX in Acronis OS Selector, it just loads Windows XP. I've read through the guide a few times, but I'm still confused as to why this is happening. Any ideas? Edit: I changed my OSX partition to Active in Acronis, OSX starts to load, but then I get the apple logo with a buster symbol where the leaf should be. This has happened to me quite a lot. Any ideas? Edit 2: I don't even know how to do the -v command, I've tried hitting every button possible, but it just keeps saying "Loading Darwinx86, then goes to the apple logo screen where it fails. Link to comment https://www.insanelymac.com/forum/topic/11339-howto-xp-osx-1044-1048-native-dual-boot/page/21/#findComment-133868 Share on other sites More sharing options...
RobsIntelMac Posted June 26, 2006 Share Posted June 26, 2006 Updating OSX: You can't install every update that's available. You can install small updates via Software Update automatically, such as updates to safari, itune, etc. But you can't install system-wide updates like "Security Update 2006-003 Mac OS X 10.4.6 Client (Intel)". You need to either download a patched one released by somebody or a workaround to manually install it (download update from apple's site). Do you know of any patched versions? if so where are its for say Security Update 2006-003 Mac OS X 10.4.6 Client (Intel)? like that hotiso 10.4.6 version you post on this HowTo? a link or clue would be nice if theirs a patched update even exists... also I am not sure but I don't think it detects my sound blaster Live card.. maybe I need drivers for it, and that nvidia card I have, I found the nvidia driver for pc mac but not sound card drivers yet.. not sure if patched or unpatched sound blaster drivers are needed.. creative brand card etc.. Link to comment https://www.insanelymac.com/forum/topic/11339-howto-xp-osx-1044-1048-native-dual-boot/page/21/#findComment-135052 Share on other sites More sharing options...
dilnalomo Posted June 26, 2006 Author Share Posted June 26, 2006 works great on my ASUS LG5X laptop -> 3,4ghz HT CPU, Ati Radeon Mobility 9700, AC97 sound, Maxvell Gigabit ethernet 1000mbps, 1go ram, 80 go hdd. i used the "goatsecx" patched iso file. Thanks for the tutorial dude ! :censored2: 48 Hi there! Awsome!!!! I just installed 10.4.5 on my Dell Inspiron 710m (same as 700m)!!!I'm very happy, but: -I only get 16mb (vesa 3) of video ram in 1024*768 resolution, no QE. Intel 852/855 problem, I *think* there's no solution. -No sound though apparently there is a way to get the Dell sound working. -No wireless, though apparently there is a way to get the Dell wireless working. Any ideas? thanks!!! 49， i have no idea, everything i aware of so far, is in the guide Updating OSX:You can't install every update that's available. You can install small updates via Software Update automatically, such as updates to safari, itune, etc. But you can't install system-wide updates like "Security Update 2006-003 Mac OS X 10.4.6 Client (Intel)". You need to either download a patched one released by somebody or a workaround to manually install it (download update from apple's site). Do you know of any patched versions? if so where are its for say Security Update 2006-003 Mac OS X 10.4.6 Client (Intel)? like that hotiso 10.4.6 version you post on this HowTo? a link or clue would be nice if theirs a patched update even exists... also I am not sure but I don't think it detects my sound blaster Live card.. maybe I need drivers for it, and that nvidia card I have, I found the nvidia driver for pc mac but not sound card drivers yet.. not sure if patched or unpatched sound blaster drivers are needed.. creative brand card etc.. i dont have 2006-003 installed, i only installed small and 10.4.x updates. follow this guide here to install 2006-003 http://forum.osx86project.org/index.php?showtopic=17580 @Billy Talent: i believe the -v commends ard entered when you see darwin on boot. you will have a list of OS and below it there's a line says "Boot:" that's where you enter the commands Link to comment https://www.insanelymac.com/forum/topic/11339-howto-xp-osx-1044-1048-native-dual-boot/page/21/#findComment-135240 Share on other sites More sharing options...
Marcoo Posted June 26, 2006 Share Posted June 26, 2006 hey guys.. cant figure out how to make any of my keyboards working (i am stuck at the installer for mac os, where i can choose the language). tryed to connect my Logitech G15, Logitech Ultra-X and Logitech Office Pro Keyboard. tryed usb and with a konverter to ps/2... anybody an idea how to make it working? Link to comment https://www.insanelymac.com/forum/topic/11339-howto-xp-osx-1044-1048-native-dual-boot/page/21/#findComment-135248 Share on other sites More sharing options...
andywhat Posted June 26, 2006 Share Posted June 26, 2006 I am new to all of this, and was wondering if I haven't partioned the drive and just put the DVD in and booted it wouldn't work right? it goes through something and then i get a message saying to please reboot, but from what I can see it only looks at the kernel or something, no install. All I have right now is a Mac OS X86 10.4.6 install DVD, and my processor is a AMD 3700? something like that. Well if anyone could help me I would appreciate it Link to comment https://www.insanelymac.com/forum/topic/11339-howto-xp-osx-1044-1048-native-dual-boot/page/21/#findComment-135262 Share on other sites More sharing options...
kamikaze2112 Posted June 26, 2006 Share Posted June 26, 2006 I've got this working with the HOTiSO Image and the Chain0 entry in the XP bootloader. It's fast as hell too Specs: Pentium D 820 Giga-Byte GA-8i945GMF 1 GB (2x512mb) DDR 533 (Kingston) On Board Sound & Video Intel Pro 100 S Desktop Adapter Maxtor 120gb HDD (MacOS) Seagate 160GB Sata2 HDD (XP) LG DVD/RW The only issue I've run into is that it fails to reboot. It'll shut down ok, but if i select reboot, it goes to a blue screen with that rotating thingy at the bottom center...Any ideas? hey guys.. cant figure out how to make any of my keyboards working (i am stuck at the installer for mac os, where i can choose the language). tryed to connect my Logitech G15, Logitech Ultra-X and Logitech Office Pro Keyboard. tryed usb and with a konverter to ps/2... anybody an idea how to make it working? Make sure you are using either PS2 or USB for both KB and Mouse. you can't have a usb kb and a ps2 mouse or vice versa. I'm using all PS2 and it works great. Converters don't work half the time... Link to comment https://www.insanelymac.com/forum/topic/11339-howto-xp-osx-1044-1048-native-dual-boot/page/21/#findComment-135377 Share on other sites More sharing options...
RobsIntelMac Posted June 26, 2006 Share Posted June 26, 2006 just to let you know I sm using the Mac.OS.X.Tiger.10.4.6.X86-HOTiSO image on dvd -Added -- Also most forgot my wireless card worked perfect or at least it seemed too with the wireless patch on this dvd disk, any way my card is a Linksys Wireless-G PCI Adapter with SpeedBooster that device or the router we setup too use a key password with our network and that works in the mac too know if I could just get it to install right again.. I will it just going to take some time...I got it too work the first time. so it should be able to boot up again, I am not sure why the boot loader for it failed with a error message the second time, installing it. My Pc Specs are -- Sound card I use most of the time is the creative SB Live (WDM) also it has Creative SB Live gameport then my capture card is maded my iomagic I think they only made one capture card, since their website only shows by current capture card my 3D card is a NVIDIA GeForce 6800 GT I got this image to run once on my computer following the info provived I did not have any problems first with it , but after trying to do that update that I should of not done , it caused the os to stop working right, I remove the partion drive and recreated it but after that I try the steps again , I got it convert but it failed to boot up this time, also the first time I got it running , when select the mac os in the boot manager it started booting up windows xp , instead of the mac, I had to go into its settings and select hide the windows xp partion part of the same drive. I got too drives and was thinking about just keep windows on one and the mac on the other drive would that work? with the steps in this thing and why do you need to convert the partion from one setting to the other one , why can't you just start with the bootable type of drive setting? I took out some info from this programs text option, also if I provided too much info go ahead and edit out the info you think is not needed here , for the CPU-Z info CPU-Z version 1.34.1 ---------------------- CPUID Output ------------------------------------------------------------------------------ Number of CPUs 2 (1 Physical) CPU #1 APIC ID 0 Name Intel Pentium 4 Code name Northwood Specification Intel® Pentium® 4 CPU 3.00GHz Family/Model/Stepping F29 Extended Family/Model 0/0 Brand ID 9 Package mPGA-478 (2h) Core Stepping D1 Technology 0.13um Instructions Sets MMX, SSE, SSE2 Features Clock Speed 2992.5 MHz Clock multiplier x15.0 Front Side Bus Frequency 199.5 MHz Bus Speed 798.0 MHz Stock frequency 3000 MHz L1 Data Cache 8 KBytes, 4-way set associative, 64 Bytes line size L1 Trace Cache 12 Kuops, 8-way set associative L2 Cache 512 KBytes, 8-way set associative, 64 Bytes line size L2 Speed 2992.5 MHz (Full) L2 Location On Chip L2 Data Prefetch Logic yes L2 Bus Width 256 bits CPU #2 (logical unit) APIC ID 1 Name Intel Pentium 4 Code name Northwood Specification Intel® Pentium® 4 CPU 3.00GHz Family/Model/Stepping F29 Extended Family/Model 0/0 Brand ID 9 Package mPGA-478 (2h) Core Stepping D1 Technology 0.13um Instructions Sets MMX, SSE, SSE2 Features Clock Speed 2992.5 MHz Clock multiplier x15.0 Front Side Bus Frequency 199.5 MHz Bus Speed 798.0 MHz Stock frequency 3000 MHz L1 Data Cache 8 KBytes, 4-way set associative, 64 Bytes line size L1 Trace Cache 12 Kuops, 8-way set associative L2 Cache 512 KBytes, 8-way set associative, 64 Bytes line size L2 Speed 2992.5 MHz (Full) L2 Location On Chip L2 Data Prefetch Logic yes L2 Bus Width 256 bits Chipset ------------------------------------------------------------------------------ Northbridge Intel i865P/PE/G/i848P rev. A2 Southbridge Intel 82801EB (ICH5) rev. 02 Graphic Interface AGP AGP Revision 3.0 AGP Transfer Rate 8x AGP SBA supported, enabled Memory Type DDR Memory Size 1536 MBytes Memory Frequency 133.0 MHz (3:2) CAS# 2.5 RAS# to CAS# 3 RAS# Precharge 3 Cycle Time (tRAS) 6 Performance Mode enabled Memory SPD ------------------------------------------------------------------------------ DIMM #1 General Memory type DDR Manufacturer (ID) Infineon (C1494E46494E454F) Size 512 MBytes Max bandwidth PC2300 (142 MHz) Part number HYS64D64020GU-7 Serial number -------- Manufacturing date Week 70/Year 01 Attributes Number of banks 2 Data width 64 bits Correction None Registered no Buffered no EPP no Timings table Frequency (MHz) 133 142 CAS# 2.0 2.5 RAS# to CAS# delay 3 3 RAS# Precharge 3 3 TRAS 6 7 DIMM #2 General Memory type DDR Manufacturer (ID) Centon (7F7F7F1900000000) Size 512 MBytes Max bandwidth PC2100 (133 MHz) Part number IITCX8SVB 512MB Attributes Number of banks 2 Data width 64 bits Correction None Registered no Buffered no EPP yes (0 profiles) Timings table Frequency (MHz) 100 133 CAS# 2.0 2.5 RAS# to CAS# delay 2 3 RAS# Precharge 2 3 TRAS 5 6 DIMM #3 General Memory type DDR Manufacturer (ID) Corsair (7F7F9E0000000000) Size 512 MBytes Max bandwidth PC3200 (200 MHz) Part number CMX512-3200C2 Attributes Number of banks 2 Data width 64 bits Correction None Registered no Buffered no EPP no Timings table Frequency (MHz) 166 200 CAS# 2.0 2.5 RAS# to CAS# delay 4 4 RAS# Precharge 4 4 TRAS 8 9 Audio device bus 0 (0x00), device 31 (0x1F), function 5 (0x05) Common header Vendor ID 0x8086 Model ID 0x24D5 Revision ID 0x02 PI 0x00 SubClass 0x01 BaseClass 0x04 Cache Line 0x00 Latency 0x00 Header 0x00 PCI header Address 2 (memory) 0xFEBFF800 Address 3 (memory) 0xFEBFF400 Subvendor ID 0x8086 Subsystem ID 0xA000 Int. Line 0x03 Int. Pin 0x02 Capabilities Power Management Capability Version 1.1 Dump 00 01 02 03 04 05 06 07 01 00 C2 C9 00 00 00 00 VGA Controller bus 1 (0x01), device 0 (0x00), function 0 (0x00) Common header Vendor ID 0x10DE Model ID 0x0045 Revision ID 0xA1 PI 0x00 SubClass 0x00 BaseClass 0x03 Cache Line 0x00 Latency 0x20 Header 0x00 PCI header Address 0 (memory) 0xFD000000 Address 1 (memory) 0xC0000000 Address 2 (memory) 0xFC000000 Subvendor ID 0x0000 Subsystem ID 0x0000 Int. Line 0x0B Int. Pin 0x01 Capabilities Power Management Capability Version 1.1 Dump 00 01 02 03 04 05 06 07 01 44 02 00 00 00 00 00 AGP Capability Version 3.0 Status enabled Transfer rate 8x (max 8x) Queue lenght 1 (max 256) Network Controller bus 2 (0x02), device 1 (0x01), function 0 (0x00) Common header Vendor ID 0x14E4 Model ID 0x4320 Revision ID 0x03 PI 0x00 SubClass 0x80 BaseClass 0x02 Cache Line 0x00 Latency 0x20 Header 0x00 PCI header Address 0 (memory) 0xFEAFE000 Subvendor ID 0x1737 Subsystem ID 0x0015 Int. Line 0x16 Int. Pin 0x01 Audio device bus 2 (0x02), device 2 (0x02), function 0 (0x00) Common header Vendor ID 0x1102 Model ID 0x0002 Revision ID 0x07 PI 0x00 SubClass 0x01 BaseClass 0x04 Cache Line 0x00 Latency 0x20 Header 0x80 PCI header Address 0 (port) 0x0000B800 Subvendor ID 0x1102 Subsystem ID 0x8061 Int. Line 0x11 Int. Pin 0x01 Capabilities Power Management Capability Version 1.0 Multimedia device bus 2 (0x02), device 4 (0x04), function 1 (0x01) Common header Vendor ID 0x109E Model ID 0x0878 Revision ID 0x11 PI 0x00 SubClass 0x80 BaseClass 0x04 Cache Line 0x00 Latency 0x20 Header 0x80 PCI header Address 0 (memory) 0xDA7FF000 Subvendor ID 0xBD11 Subsystem ID 0x1200 Int. Line 0x0A Int. Pin 0x01 Capabilities Virtual Product Data Capability DMI ------------------------------------------------------------------------------ DMI BIOS -------- vendor Intel Corp. version RL86510A.86A.0056.P07.0305201221 date 05/20/2003 DMI System Information ---------------------- manufacturer unknown product unknown version unknown serial unknown UUID 7C1E4ABB-A46911D7-A9EC0002-B39A5F0A DMI Baseboard ------------- vendor Intel Corporation model D865PERL revision AAC27646-208 serial AZRL32605251 DMI System Enclosure -------------------- manufacturer unknown chassis type 2X chassis serial unknown DMI Processor ------------- manufacturer Intel model Intel® Pentium® 4 processor clock speed 3000.0MHz FSB speed 200.0MHz multiplier 15.0x DMI Memory Controller --------------------- correction 64-bit ECC Max module size 1024MBytes DMI Memory Module ----------------- designation DIMM1 size 512MBytes (double bank) DMI Memory Module ----------------- designation DIMM2 size 512MBytes (double bank) DMI Memory Module ----------------- designation DIMM3 size 512MBytes (double bank) DMI Memory Module ----------------- designation DIMM4 DMI Port Connector ------------------ designation J1A1 (internal) designation PS2Mouse (external) port type Mouse Port connector PS/2 DMI Port Connector ------------------ designation J1A1 (internal) designation Keyboard (external) port type Keyboard Port connector PS/2 DMI Port Connector ------------------ designation J2A1 (internal) designation COM 1 (external) port type Serial Port 16550A connector DB-9 female DMI Port Connector ------------------ designation J4A2 (internal) designation LPT1 (external) port type Parallel Port ECP/EPP connector DB-25 male DMI Port Connector ------------------ designation JA5A1 (internal) designation USB (external) port type USB connector Access Bus (USB) DMI Port Connector ------------------ designation JA5A1 (internal) designation USB (external) port type USB connector Access Bus (USB) DMI Port Connector ------------------ designation J9E1 (internal) designation FireWire (external) port type Firewire (IEEE P1394) connector IEEE 1394 DMI Port Connector ------------------ designation J2A2 (internal) designation USB (external) port type USB connector Access Bus (USB) DMI Port Connector ------------------ designation J2A2 (internal) designation USB (external) port type USB connector Access Bus (USB) DMI Port Connector ------------------ designation JA5A1 (internal) designation RJ-45 Type (external) port type Network Port connector RJ-45 DMI Port Connector ------------------ designation J4A1 (internal) designation Audio Mic In (external) port type Audio Port connector Mini Jack (headphones) DMI Port Connector ------------------ designation J4A1 (internal) designation Audio Line In (external) port type Audio Port connector Mini Jack (headphones) DMI Port Connector ------------------ designation J4A1 (internal) designation Audio Line Out (external) port type Audio Port connector Mini Jack (headphones) DMI Port Connector ------------------ designation J4B1 - +12V (internal) DMI Port Connector ------------------ designation J3J1 - FDD (internal) connector On Board Floppy DMI Port Connector ------------------ designation J5J2 - PRI IDE (internal) connector On Board IDE DMI Port Connector ------------------ designation J5J1 - SEC IDE (internal) connector On Board IDE DMI Port Connector ------------------ designation J9B2 - CDIN (internal) port type Audio Port connector On Board Sound Input From CD-ROM DMI Port Connector ------------------ designation J9B1 - AUX IN (internal) port type Audio Port DMI Port Connector ------------------ designation J8J1 - FRONT PANEL HDR (internal) DMI Port Connector ------------------ designation J1F2 - CPU FAN (internal) DMI Port Connector ------------------ designation J9H3 - FNT PNL (internal) DMI Port Connector ------------------ designation J6J2 - FRONT CHASSIS FAN (internal) DMI Port Connector ------------------ designation J5B1 - REAR CHASSIS FAN (internal) DMI Port Connector ------------------ designation J7H2 - BIOS CONFIG (internal) DMI Port Connector ------------------ designation J8A1 - FP AUDIO (internal) connector Proprietary DMI Port Connector ------------------ designation J7F1 - FRONT PANEL USB (internal) DMI Port Connector ------------------ designation J2J1 - PS (internal) DMI Port Connector ------------------ designation J6J3 - CH INTR (internal) DMI Port Connector ------------------ designation J9D1 - FireWire (internal) DMI Port Connector ------------------ designation J9E1 - FireWire (internal) DMI Port Connector ------------------ designation J7H1 - SATA-0 (internal) DMI Port Connector ------------------ designation J6H1 - SATA-1 (internal) DMI Extension Slot ------------------ designation J5C1 type AGP 4x width 32 bits populated yes DMI Extension Slot ------------------ designation J6B2 type PCI width 32 bits populated no DMI Extension Slot ------------------ designation J6B1 type PCI width 32 bits populated yes DMI Extension Slot ------------------ designation J7B1 type PCI width 32 bits populated yes DMI Extension Slot ------------------ designation J8B2 type PCI width 32 bits populated no DMI Extension Slot ------------------ designation J8B1 type PCI width 32 bits populated yes DMI Physical Memory Array ------------------------- location Motherboard usage System Memory correction None max capacity 4096MBytes max# of devices 4 DMI Memory Device ----------------- designation J5G1 format DIMM type DDR total width 64bits data width 64bits size 512MBytes DMI Memory Device ----------------- designation J5G2 format DIMM type DDR total width 64bits data width 64bits size 512MBytes DMI Memory Device ----------------- designation J5H1 format DIMM type DDR total width 64bits data width 64bits size 512MBytes DMI Memory Device ----------------- designation J5H2 format DIMM type DDR total width 64bits data width 64bits Software ------------------------------------------------------------------------------ Windows Version Microsoft Windows XP Professional Service Pack 2 (Build 2600) DirectX Version 9.0c Link to comment https://www.insanelymac.com/forum/topic/11339-howto-xp-osx-1044-1048-native-dual-boot/page/21/#findComment-135438 Share on other sites More sharing options...
RobsIntelMac Posted June 26, 2006 Share Posted June 26, 2006 posted by kamikaze2112 ""The only issue I've run into is that it fails to reboot. It'll shut down ok, but if i select reboot, it goes to a blue screen with that rotating thingy at the bottom center...Any ideas?"" --- no I was able to reboot just fine with that hotiso image, on my computer, maybe its just your system, or something else my default reboot and shutdown worked fine, but the install was slow to start up on the dvd on my computer ------------------------------------------------ also my dvd drives are the following Generic DVD RW 12XMAX -- burns both dvd and cd-roms in windows PIONEER DVD-RW DVR-105 -- this one fails to burn dvd right, that why I got the other dvd drive for , only use this one for reading - my HD are the following type Maxtor 93073U6 - 30GB drive ST380020A - 76 GB drive and got one 80GB about external drive too , use it for most of the time subtext anime to store on it, etc.. its like a backup drive I use in windows Link to comment https://www.insanelymac.com/forum/topic/11339-howto-xp-osx-1044-1048-native-dual-boot/page/21/#findComment-135456 Share on other sites More sharing options...
RobsIntelMac Posted June 26, 2006 Share Posted June 26, 2006 Manual installation of Security Update 2006-003 to a 10.4.6 install ---INTEL ONLY--- ----------------------------------------------------------------------- obtain SecUpd2006-003Intel.dmg, and Pacifist 2.0, from Charlessoft.com that file does not or is not located on that site I look at the page of Charlessoft.com and could not find it their , was I missing something or is that info outdated on this site , is their any other sites you can think of where you can get the SecUpd2006-003Intel.dmg image , I also heard or not sure if that iso has a patched version of this, in it and maybe the update thing does not detect it etc.. because its patched or is that info wrong.? http://forum.osx86project.org/index.php?showtopic=17580 also on starting up the mac os x , no startup menu was show , and I never had text running either on the startup like the info page says, it just started the mac progress bar , and loaded it , but that may be because you are using a older version than 10.4.6 , I am not sure.. I just notice that on my pc , I never got the darwin startup menu , nor did it display text on booting it, it did a darwin startup progress bar and then loaded a screen witch showed a loading mac progress bar for the os , then the os just started.. when it was working.. anyway just seemed like it never showed a Press any key to load startup options.. (1) (From image text on your site) I don't even remember seeing this with the darwin loader , maybe it just went by it too fast I am not sure.. Link to comment https://www.insanelymac.com/forum/topic/11339-howto-xp-osx-1044-1048-native-dual-boot/page/21/#findComment-135464 Share on other sites More sharing options...
dilnalomo Posted June 29, 2006 Author Share Posted June 29, 2006 ok，number 50 and 51, kamikaze2112 and RobsIntelMac! woot! i will edit the guide with 10.4.7 update info... Link to comment https://www.insanelymac.com/forum/topic/11339-howto-xp-osx-1044-1048-native-dual-boot/page/21/#findComment-137015 Share on other sites More sharing options...
Billy Talent Posted July 3, 2006 Share Posted July 3, 2006 Success! I'm on a Dell Inspiron 700m Pentium M 1.7 Ghz 1 Gb Ram I used the "MacOSX_10.4.4DVDPATCHED_Myz" iso. Now I just have to get my internal wireless to work and see if there's a way to use my widescreen display correctly. Link to comment https://www.insanelymac.com/forum/topic/11339-howto-xp-osx-1044-1048-native-dual-boot/page/21/#findComment-138756 Share on other sites More sharing options...
Onetrack Posted July 4, 2006 Share Posted July 4, 2006 Hi I followed your guide using HOTISO 10.4.6 and it worked great, Sound, video and internet are working, so far I've downloaded / installed ADIUM, but its working like a charm Specs: Shuttle SNG85V3 Sempron 3000+ 64bit 1 gig ddr 400 pioneer dvd dual layer 111-D HD setup: Drive 1 ATA133 master, 120 gig 20 gig - Windows NTFS boot 100 gig - windows ntfs Drive 2 ATA133 slave, 250 gig 210 gig Windows NTFS 40 gig HFS Mac partition Drive 3 Sata 2, external 300 gig It did recognize my onboard sound without a problem Had to put in an SIS ethernet adapter as onboard was working but not able to be used Video card Radeon 9550 (flashed to a 9600) 256 meg, video seems locked @ 1024x768x32 will work on that next Fantastic guide, very very helpful cheers, One took forever to convert the drive, about 50 minutes for a 40 gig partition Link to comment https://www.insanelymac.com/forum/topic/11339-howto-xp-osx-1044-1048-native-dual-boot/page/21/#findComment-139308 Share on other sites More sharing options...
mounir Posted July 4, 2006 Share Posted July 4, 2006 thank you dilnalomo i 've used your guide and i success to have dual boot ni my HP Pavilion dv 4137 (dv4000 series) ofr installation i use the myzar iso 10.4.5 specs are: intel PM centrino 1.6 sse2 intel chipset 910/915 with integrated graphics GMA900: work great with QE/CI soudmax integrated audio: work great without manipulation 15.4" widescreen monitor: need hardware manipulation to disable external VGA connector keybord with hotkeys: work great but still not find the "@" button wireless intel 2200B/G not working mmc/sd card reader not working sagem fast 800 dsl modem not working (possible problem in driver compatible only with PPC) webcam with designation: ZC0301P not working (driver not found) EDIT 1 i have update it to 10.4.7 now with security update using a guide in tutorials and ..... it's perfect but not found yet drivers for wifi/mmc/webcam/adslusbmodem Link to comment https://www.insanelymac.com/forum/topic/11339-howto-xp-osx-1044-1048-native-dual-boot/page/21/#findComment-139520 Share on other sites More sharing options...
cheerio Posted July 4, 2006 Share Posted July 4, 2006 I'm wondering how can I dual boot from VMware because I don't have a DVD drive/burner. I have the JAS 10.4.6 iso, and i mounted it with daemon tools. In Vmware I set the Cd drive the the daemon tools one but when i get to the part where you erase the disk, i don't have the "disk." I only see some Vmware disks, and i'm wondering how i can get around that. Does any body know? Thanks in advanced Link to comment https://www.insanelymac.com/forum/topic/11339-howto-xp-osx-1044-1048-native-dual-boot/page/21/#findComment-139615 Share on other sites More sharing options...
vorl Posted July 4, 2006 Share Posted July 4, 2006 hi i have followed the steps until step 8 where i renamed the partition. only problem is that when i try to boot macosx it just boots windows. i tried setting it to active but still doesnt work! Any ideas anyone? i am using: -A toshiba laptop -Mac.OS.X.Tiger.10.4.6.X86-HOTiSO There were no problems until then and I still can boot into windows. Cheers Link to comment https://www.insanelymac.com/forum/topic/11339-howto-xp-osx-1044-1048-native-dual-boot/page/21/#findComment-139683 Share on other sites More sharing options...
xSuRgEx Posted July 4, 2006 Share Posted July 4, 2006 iam having excatly the same problems as you but iam using the Jas Patched 10.4.6 install dvd is there any way to install 10.4.6 and just have the darwin boot loader show osx and my xp install? iam realy starting to give up with this osx86 thing and wish i had kept my 10.4.1 that worked with no problems at all. Link to comment https://www.insanelymac.com/forum/topic/11339-howto-xp-osx-1044-1048-native-dual-boot/page/21/#findComment-139715 Share on other sites More sharing options...
tripleboot Posted July 5, 2006 Share Posted July 5, 2006 I'm wondering how can I dual boot from VMware because I don't have a DVD drive/burner. I have the JAS 10.4.6 iso, and i mounted it with daemon tools. In Vmware I set the Cd drive the the daemon tools one but when i get to the part where you erase the disk, i don't have the "disk." I only see some Vmware disks, and i'm wondering how i can get around that. Does any body know? Thanks in advanced http://wiki.osx86project.org/wiki/index.ph...-_Mount_the_ISO hi i have followed the steps until step 8 where i renamed the partition. only problem is that when i try to boot macosx it just boots windows. i tried setting it to active but still doesnt work! Any ideas anyone? i am using: -A toshiba laptop -Mac.OS.X.Tiger.10.4.6.X86-HOTiSO There were no problems until then and I still can boot into windows. Cheers Did tou copy the chain0 file to your C:\ directory and add C:\chain0="Mac OS X" to your boot.ini Link to comment https://www.insanelymac.com/forum/topic/11339-howto-xp-osx-1044-1048-native-dual-boot/page/21/#findComment-139762 Share on other sites More sharing options...
zek Posted July 5, 2006 Share Posted July 5, 2006 i seem to have come to a problem. i followed everything in the steps exactly (i am pc savy too) then it reboots to os selector. i go to tools-acronis disk director and it freezes half way..i leave it for an hr and its stuck i restart and try booting osx and i get the hfs+ partition error and think its because its not the primary. formatted and redid it and the same freezing happens midway. i installed it on a 50gb partition...anyone got any ideas? Link to comment https://www.insanelymac.com/forum/topic/11339-howto-xp-osx-1044-1048-native-dual-boot/page/21/#findComment-139834 Share on other sites More sharing options...
cheerio Posted July 5, 2006 Share Posted July 5, 2006 http://wiki.osx86project.org/wiki/index.ph...-_Mount_the_ISO Thanks for the reply, but I already did that. I mounted the ISO with Daemon tools (it is now drive E:) and in vmware i changed the cd-rom drive to E:. It boots, but the problem is when I go into disk utility. I don't see my hard drive, i see virtual hard drives created by vmware Link to comment https://www.insanelymac.com/forum/topic/11339-howto-xp-osx-1044-1048-native-dual-boot/page/21/#findComment-140050 Share on other sites More sharing options...
tobi123 Posted July 5, 2006 Share Posted July 5, 2006 Hey there, I´ve read a lot in these days in this forum, and finally i decided to install OSX on my Toshiba Satellite A50 with goatsecx iso. Well, i took some days and finally it works. I run 10.4.6 now on one HD with XP using Acronis Boot Manager now. One hint for all people out there which are just about to bite your Mac DVD: It took me a while to find out that it is not possible to run MAC OS X on one HD with XP if you have another logical partition in front of your Mac partition!!!! Thank you very much for this tutorial! Link to comment https://www.insanelymac.com/forum/topic/11339-howto-xp-osx-1044-1048-native-dual-boot/page/21/#findComment-140115 Share on other sites More sharing options...
cheerio Posted July 5, 2006 Share Posted July 5, 2006 Thanks for the reply, but I already did that. I mounted the ISO with Daemon tools (it is now drive E:) and in vmware i changed the cd-rom drive to E:. It boots, but the problem is when I go into disk utility. I don't see my hard drive, i see virtual hard drives created by vmware Nevermind, I feel so stupid I wasn't pressing Escape and booting from the CD-Rom Drive. Sorry Awesome guide, add one to the success counter Link to comment https://www.insanelymac.com/forum/topic/11339-howto-xp-osx-1044-1048-native-dual-boot/page/21/#findComment-140171 Share on other sites More sharing options...
vorl Posted July 5, 2006 Share Posted July 5, 2006 Did tou copy the chain0 file to your C:\ directory and add C:\chain0="Mac OS X" to your boot.ini i thought that was only if you wanted windows to be default? anyway i tried it and still same result!! any other ideas? thanks Link to comment https://www.insanelymac.com/forum/topic/11339-howto-xp-osx-1044-1048-native-dual-boot/page/21/#findComment-140296 Share on other sites More sharing options...
BPW93 Posted July 6, 2006 Share Posted July 6, 2006 Great guide. I followed all the instructions but when I get to the boot menu, I click on the OS X partition and it would automatically boot into windows. Does anyone know how to fix this? thank you Link to comment https://www.insanelymac.com/forum/topic/11339-howto-xp-osx-1044-1048-native-dual-boot/page/21/#findComment-140429 Share on other sites More sharing options...
wss7932 Posted July 6, 2006 Share Posted July 6, 2006 OK. I have a dual boot. I am using 10.4.6 and I used Acronis to partition but, I did it differently. I resized my Windows partition and gave myself 20 gig of free space. I then created an unformated primary partition and afterward changed the type to 0xaf. I then booted to the install CD and the rest is all good. The only thing that I can't figure out and I don't have working right is ...oh by the way I'm using chain0... but, if I go to select a startup disk then nothing shows up. I can't figure it out. What's up with this thing? Link to comment https://www.insanelymac.com/forum/topic/11339-howto-xp-osx-1044-1048-native-dual-boot/page/21/#findComment-140454 Share on other sites More sharing options...
cbmkgd Posted July 6, 2006 Share Posted July 6, 2006 @wss: A little more detail of your system please. MB, cpu, hard drive type... Which 10.4.6 release? Custom install of osx? A few other questions: When you select Windows in the ntloader, you boot in windows without problems? (Just in case, recheck syntax/string for osx in your boot.ini) Is the problem only when you select osx? By "nothing shows up" you mean a totally blank screen? Or does it just return to the ntloader? And did you try installing OS Selector? If you do try it, remove chain0 reference in boot.ini first. Link to comment https://www.insanelymac.com/forum/topic/11339-howto-xp-osx-1044-1048-native-dual-boot/page/21/#findComment-140838 Share on other sites More sharing options...
Recommended Posts