texem Posted October 20, 2021 Share Posted October 20, 2021 10 hours ago, antuneddu said: I applied this patch (in MaciAsl) Thanks to @gengik84 https://www.macos86.it/topic/9-mappatura-porte-usb/ UsbConnectorTypePatch.txt.zip Thanks @antuneddu for your infos. i patched ssdt-6 in a similar way. Attached my SSDT-6.aml with 15 ports defined for my chassis and the code snippet for OC. The table-length must be defined correctly for OC to find and delete the original SSDT-6. Check this from your BIOS via iASL ! SSDT-6.aml ocacpiconfig.txt 2 1 Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/184/#findComment-2769591 Share on other sites More sharing options...
Anto65 Posted October 20, 2021 Share Posted October 20, 2021 1 hour ago, texem said: Thanks @antuneddu for your infos. i patched ssdt-6 in a similar way. Attached my SSDT-6.aml with 15 ports defined for my chassis and the code snippet for OC. The table-length must be defined correctly for OC to find and delete the original SSDT-6. Check this from your BIOS via iASL ! SSDT-6.aml 10.52 kB · 1 download ocacpiconfig.txt 591 B · 1 download Of course SSDT-xh_rvp08.rtfd.zip 👍 1 Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/184/#findComment-2769595 Share on other sites More sharing options...
pkdesign Posted October 20, 2021 Share Posted October 20, 2021 11 hours ago, texem said: Attached my SSDT-6.aml with 15 ports defined for my chassis and the code snippet for OC. The table-length must be defined correctly for OC to find and delete the original SSDT-6. Check this from your BIOS via iASL ! I tried to do this myself but I got cross-eyed trying! But your SSDT works perfectly for me since I have the same board (with WiFi). 1 Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/184/#findComment-2769621 Share on other sites More sharing options...
dsynos80 Posted October 20, 2021 Share Posted October 20, 2021 Hello everybody! I hope everyone is well and healthy! I decided to update OC based on AG's 0.74, i can see all the boot options but when i select the osx partition it reboots directly to recovery.. Any chance of help? Cant seem to find whats wrong. I am still on latest Catalina Also my Titan ridge card works great without SSDT. config.plist Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/184/#findComment-2769630 Share on other sites More sharing options...
Anto65 Posted October 20, 2021 Share Posted October 20, 2021 5 minutes ago, dsynos80 said: Hello everybody! I hope everyone is well and healthy! I decided to update OC based on AG's 0.74, i can see all the boot options but when i select the osx partition it reboots directly to recovery.. Any chance of help? Cant seem to find whats wrong. I am still on latest Catalina Also my Titan ridge card works great without SSDT. config.plist 20.34 kB · 2 downloads Set SecureBootModel to Disabled 1 Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/184/#findComment-2769631 Share on other sites More sharing options...
dsynos80 Posted October 20, 2021 Share Posted October 20, 2021 10 minutes ago, antuneddu said: Set SecureBootModel to Disabled Haha it was that simple i had no idea.. thnx a lot!!!! 1 Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/184/#findComment-2769632 Share on other sites More sharing options...
scotty pro Posted October 21, 2021 Share Posted October 21, 2021 Boot Picker shows wrongly named startup disk. Upgraded from Mojave to Big Sur, renamed my SSD to Big Sur on the desktop and now when I boot my Hack it still shows the old Mojave disk in the boot picker even though it actually boots into Big Sur. Am I missing something here ???, have reset Nvram twice with no effect. Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/184/#findComment-2769659 Share on other sites More sharing options...
Anto65 Posted October 21, 2021 Share Posted October 21, 2021 17 minutes ago, scotty pro said: Boot Picker shows wrongly named startup disk. Upgraded from Mojave to Big Sur, renamed my SSD to Big Sur on the desktop and now when I boot my Hack it still shows the old Mojave disk in the boot picker even though it actually boots into Big Sur. Am I missing something here ???, have reset Nvram twice with no effect. Disable SIP first https://drive.google.com/file/d/16wWX6hZW50szRYrMI08D8jEUOIPY5wsh/view?usp=drivesdk Or try installing https://www.intel.com/content/www/us/en/developer/articles/tool/power-gadget.html 1 Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/184/#findComment-2769661 Share on other sites More sharing options...
scotty pro Posted October 21, 2021 Share Posted October 21, 2021 @antuneddu thanks, the first video worked a treat. 1 Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/184/#findComment-2769688 Share on other sites More sharing options...
Project 2501 Posted October 22, 2021 Share Posted October 22, 2021 On 10/20/2021 at 11:51 AM, dsynos80 said: Hello everybody! I hope everyone is well and healthy! I decided to update OC based on AG's 0.74, i can see all the boot options but when i select the osx partition it reboots directly to recovery.. Any chance of help? Cant seem to find whats wrong. I am still on latest Catalina Also my Titan ridge card works great without SSDT. config.plist 20.34 kB · 4 downloads I haven't quite made the switch to OC yet, but I have a test USB flash drive prepared. I also have the Titan Ridge card. Are you saying that AG's EFI doesn't require the SSDT to work, or did you have to do some custom tweaking to get it to work without it? I copied CLOVER/ACPI/patched/SSDT-Z390-RP21-SLOT4-TB3HP.aml file to the OC/ACPI directory. I assumed that was all that was needed when I switch to OC. Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/184/#findComment-2769736 Share on other sites More sharing options...
rob1980 Posted October 23, 2021 Share Posted October 23, 2021 On 10/16/2021 at 4:25 PM, saCULar said: I have chosen to go down that path also, rob1980. I think Monterey will require a "Mac" wireless/bluetooth solution to work properly. Well, my card arrived this morning.. It's not being detected in Mac OS or Windows after installing and enabling wifi in bios. Here's the thread I initially saw on reddit regarding this card and it not working on Intel CNVI. https://www.reddit.com/r/hackintosh/comments/iglzw7/bcm94360ng_on_z390/ I'm open to ideas.... Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/184/#findComment-2769789 Share on other sites More sharing options...
laxattack Posted October 23, 2021 Share Posted October 23, 2021 So has anyone tried to make a OC 0.7.5 build to enable Resizable Bar Support? I am trying to mess with it, but getting some non-booting issues (thankfully I have 0.7.4 to fall back on) Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/184/#findComment-2769798 Share on other sites More sharing options...
dsynos80 Posted October 23, 2021 Share Posted October 23, 2021 (edited) On 10/22/2021 at 6:52 AM, Project 2501 said: I haven't quite made the switch to OC yet, but I have a test USB flash drive prepared. I also have the Titan Ridge card. Are you saying that AG's EFI doesn't require the SSDT to work, or did you have to do some custom tweaking to get it to work without it? I copied CLOVER/ACPI/patched/SSDT-Z390-RP21-SLOT4-TB3HP.aml file to the OC/ACPI directory. I assumed that was all that was needed when I switch to OC. I did no tweak.It worked 4 me but i decided to put the SSDT again to be more stable. You also need to define it on config.plist Edited October 23, 2021 by dsynos80 Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/184/#findComment-2769844 Share on other sites More sharing options...
AudioGod Posted October 23, 2021 Author Share Posted October 23, 2021 (edited) 16 hours ago, laxattack said: So has anyone tried to make a OC 0.7.5 build to enable Resizable Bar Support? I am trying to mess with it, but getting some non-booting issues (thankfully I have 0.7.4 to fall back on) It works perfectly. I’m currently using it now on my 6800 set ResizeAppleGpuBars=0 And ResizeGPUBars=-1, Enable the ResizeBar in the bios and away you go. NOTE - If you are not using a 6800, 6800 XT or 6900 XT then it’s totally pointless using the feature. Edited October 23, 2021 by AudioGod 2 1 Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/184/#findComment-2769861 Share on other sites More sharing options...
AudioGod Posted October 23, 2021 Author Share Posted October 23, 2021 (edited) Correction, Apparently Navi has SAM support in windows too so it might work on a 5700 XT but since it only has 8GB of VRAM I’m not so sure it will do anything exciting but there’s only one way to find out I guess. Edited October 23, 2021 by AudioGod 1 1 Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/184/#findComment-2769862 Share on other sites More sharing options...
dsynos80 Posted October 24, 2021 Share Posted October 24, 2021 13 hours ago, AudioGod said: Correction, Apparently Navi has SAM support in windows too so it might work on a 5700 XT but since it only has 8GB of VRAM I’m not so sure it will do anything exciting but there’s only one way to find out I guess. Really we can do it now? Where do we put these 2 options on 0.75. It would b great if we can leave the option on in bios. Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/184/#findComment-2769895 Share on other sites More sharing options...
Anto65 Posted October 24, 2021 Share Posted October 24, 2021 7 minutes ago, dsynos80 said: Really we can do it now? Where do we put these 2 options on 0.75. It would b great if we can leave the option on in bios. The values are those of the sample.list 3 1 Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/184/#findComment-2769896 Share on other sites More sharing options...
laxattack Posted October 24, 2021 Share Posted October 24, 2021 18 hours ago, AudioGod said: It works perfectly. I’m currently using it now on my 6800 set ResizeAppleGpuBars=0 And ResizeGPUBars=-1, Enable the ResizeBar in the bios and away you go. NOTE - If you are not using a 6800, 6800 XT or 6900 XT then it’s totally pointless using the feature. I actually have a 6900XT in my system, which is why I was asking about it. I am just having issues trying to get it to boot using that 0.7.5. I may have messed up something in my config.plist. Anyone have a working one? Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/184/#findComment-2769907 Share on other sites More sharing options...
MDavalos1993 Posted October 24, 2021 Share Posted October 24, 2021 Hello @AudioGod thanks for ur work... I have a gigabyte z390 Aorus pro wifi + i9900k... + Mac OS Monterrey 12.0.1 Everything is OK but I think to modify the usbMap because some ports doesn't work im new here can u help me ... how can I update it? Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/184/#findComment-2769908 Share on other sites More sharing options...
AudioGod Posted October 24, 2021 Author Share Posted October 24, 2021 15 minutes ago, MDavalos1993 said: Hello @AudioGod thanks for ur work... I have a gigabyte z390 Aorus pro wifi + i9900k... + Mac OS Monterrey 12.0.1 Everything is OK but I think to modify the usbMap because some ports doesn't work im new here can u help me ... how can I update it? There’s a 15 port limit on a Intel hack so you can’t go over that amount. Usb 2.0 and 3.0 coming from one port counts as 2 ports used out of your 15 so you need to set it up how you need it for yourself. use USBToolBox to make a new map and do it via windows. https://github.com/USBToolBox if you want to do your mapping in MacOS then use this script instead, https://github.com/corpnewt/USBMap Full instructions can be found on the GitHub. 1 2 Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/184/#findComment-2769911 Share on other sites More sharing options...
pkdesign Posted October 25, 2021 Share Posted October 25, 2021 On 10/24/2021 at 10:27 AM, MDavalos1993 said: Hello @AudioGod thanks for ur work... I have a gigabyte z390 Aorus pro wifi + i9900k... + Mac OS Monterrey 12.0.1 Everything is OK but I think to modify the usbMap because some ports doesn't work im new here can u help me ... how can I update it? Both the USBMap.kext that @AudioGod has long provided and the SSDT that @texem recently posted work perfectly for me. Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/184/#findComment-2769949 Share on other sites More sharing options...
Blesh Posted October 25, 2021 Share Posted October 25, 2021 (edited) How it feels, when you update with AudioGods EFI in to a new macOS version. Edited October 25, 2021 by Blesh 1 9 Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/184/#findComment-2769972 Share on other sites More sharing options...
Cipha Posted October 25, 2021 Share Posted October 25, 2021 Anybody tested Pro Audio Apps in Monterey yet? Usually I stay 1 year behind for best compatibility but I really could use the shared iCloud folders this time... Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/184/#findComment-2769984 Share on other sites More sharing options...
AudioGod Posted October 25, 2021 Author Share Posted October 25, 2021 12 minutes ago, Cipha said: Anybody tested Pro Audio Apps in Monterey yet? Usually I stay 1 year behind for best compatibility but I really could use the shared iCloud folders this time... If it works on Big Suck then it will be fine on Monterey bud. Everything I use works the same across both OS 1 1 Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/184/#findComment-2769989 Share on other sites More sharing options...
dsynos80 Posted October 26, 2021 Share Posted October 26, 2021 Hello, so regarding anyone who has the Titan Ridge card, after many tests it seems better to NOT put the TB SSDT. The card works better without it. My 828es was connected but i was getting lags and loosing audio. After i removed it all problems are gone. Also on OC 0.7.5 and with Resizable BAR on, i feel the system snappier in animations with my 5700xt, or maybe its my idea. I left the 1st option on 0 instead -1. Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/184/#findComment-2770010 Share on other sites More sharing options...
Recommended Posts