Jump to content

10.9 GM Released.


AsusFreak
 Share

282 posts in this topic

Recommended Posts

Have you tried this: http://goo.gl/4g7JR (also applied to genuine machines). At the end, don`t forget repair permissions with Disk Utility. Works for me in ML.

When I through Mix downside patch "slowly sleep,restart,shutdown problem seems be sloved & when restart or shutdown CMOS reset problem" Now my system 99.99% working Out Of the Box.

mitch_de, on 12 Jun 2013 - 03:35 AM, said:snapback.png

Got CMOS reset problem - used patched 10.8 AppleRTC but that doesnt worked.

Can we use the old patch on new 10.9 RTC kext?

No, it won't patch anything.

 

Try this

sudo perl -pi -e 's|\x75\x2e\x0f\xb6|\xeb\x2e\x0f\xb6|' /System/Library/Extensions/AppleRTC.kext/Contents/MacOS/AppleRTC

Actually it's the same patch as 10.8 just different position

http://www.insanelym...y-applertckext/

 

10.8

< 0000000000001d32 jne 0x1d64

---

> 0000000000001d32 jmp 0x1d64

10.9

< 0000000000000d3e jne 0xd6e

---

> 0000000000000d3e jmp 0xd6e

Link to comment
Share on other sites

@The Real Deal: good work! Could you share Bios settings? How did iMac14,2 SMBIOS?

Thanks

 

 

BIOS settings ? Just need to "optimized defaults" to be OS X compliant with my board in sig :)

 

For iMac14,2 you need to browse geekbench charts. I got some infos there too : http://pikeralpha.wordpress.com/ and some googling :)

 

My serial number is incomplete apart some right digits for iMac14,2 and i need the SMC version (REV in FakeSMC) too for this babies :)

Link to comment
Share on other sites

Thank you! With my GA-Z87N i'm testing some changes from "optimize defaults", now with EIST disabled and Turbo @4.2.

 

I haven't yet learned how to make serial numbers, with "Haswell" SMBios works better? With my macmini6.1 i have CPU P-States [ 8 34 35 (36) 37 ] (with no OC)

Link to comment
Share on other sites

yes, its working 10.9gm

its from 10.9 dp2

 

@Regi unfortunately that didn't work for me. I just have to replace IONetworkingFamily with the one you provide right? I don't know what i'm doing is wrong.

 

Here is the log error.

Oct 16 00:18:53 HQ com.apple.kextd[12]: WARNING - Invalid signature -67030 0xFFFFFFFFFFFEFA2A for kext "/System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleBCM5701Ethernet.kext"
Oct 16 00:18:53 HQ com.apple.kextd[12]: /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleBCM5701Ethernet.kext - no dependency found for com.apple.driver.mDNSOffloadUserClient.
Oct 16 00:18:53 HQ com.apple.kextd[12]: /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleBCM5701Ethernet.kext - no compatible dependency found for com.apple.iokit.IOEthernetAVBController.
Oct 16 00:18:53 HQ com.apple.kextd[12]: Can't load /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleBCM5701Ethernet.kext - failed to resolve dependencies.
Oct 16 00:18:53 HQ com.apple.kextd[12]: Load com.apple.iokit.AppleBCM5701Ethernet failed; removing personalities from kernel.
Oct 16 00:18:55 HQ kernel[0]: kxld[com.apple.iokit.IOUserEthernet]: The super class vtable '__ZTV20IOEthernetController' for vtable '__ZTV24IOUserEthernetController' is out of date. Make sure your kext has been built against the correct headers.
Oct 16 00:18:55 HQ kernel[0]: Can't load kext com.apple.iokit.IOUserEthernet - link failed.
Oct 16 00:18:55 HQ kernel[0]: Kext com.apple.iokit.IOUserEthernet failed to load (0xdc008016).
Oct 16 00:18:55 HQ kernel[0]: Failed to load kext com.apple.iokit.IOUserEthernet (error 0xdc008016).
Oct 16 00:18:55 HQ com.apple.kextd[12]: Failed to load /System/Library/Extensions/IOUserEthernet.kext - (libkern/kext) link error.
Oct 16 00:18:55 HQ com.apple.kextd[12]: Load com.apple.iokit.IOUserEthernet failed; removing personalities from kernel.
  • Like 1
Link to comment
Share on other sites

this work fine for me on 10.9

http://lnx2mac.blogspot.com/p/realtekrtl81xx-osx-driver.html

good luck

@drnick,

Thank you for this installer, it did not work with the realtek, but it showed an ethernet card just warned me it's unplugged, but resolved some conflicts, so I put back the Yukon based IONetworking and it worked. I finally resolved the sound using VoodooHDA, but only accompanied by HDA disabler, well the volume is very soft, but I have a sound device. I resolved the CMOS reset, using Pandora, any other AppleRTC kext patched didn't work. At least, I have a working Mavericks on p5k-vm.

Link to comment
Share on other sites

ionetworkfamily.kext plugins folder

do not replace ionetworkfam kext

 

@regi

 

That's what I did. I put kext you attaced into plugins folder inside IONetworkingFamily.kext replacing the old one.

 

Here is some log if any useful. Thanks !

Oct 16 00:18:53 HQ com.apple.kextd[12]: WARNING - Invalid signature -67030 0xFFFFFFFFFFFEFA2A for kext "/System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleBCM5701Ethernet.kext"
Oct 16 00:18:53 HQ com.apple.kextd[12]: /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleBCM5701Ethernet.kext - no dependency found for com.apple.driver.mDNSOffloadUserClient.
Oct 16 00:18:53 HQ com.apple.kextd[12]: /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleBCM5701Ethernet.kext - no compatible dependency found for com.apple.iokit.IOEthernetAVBController.
Oct 16 00:18:53 HQ com.apple.kextd[12]: Can't load /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleBCM5701Ethernet.kext - failed to resolve dependencies.
Oct 16 00:18:53 HQ com.apple.kextd[12]: Load com.apple.iokit.AppleBCM5701Ethernet failed; removing personalities from kernel.
Oct 16 00:18:55 HQ kernel[0]: kxld[com.apple.iokit.IOUserEthernet]: The super class vtable '__ZTV20IOEthernetController' for vtable '__ZTV24IOUserEthernetController' is out of date. Make sure your kext has been built against the correct headers.
Oct 16 00:18:55 HQ kernel[0]: Can't load kext com.apple.iokit.IOUserEthernet - link failed.
Oct 16 00:18:55 HQ kernel[0]: Kext com.apple.iokit.IOUserEthernet failed to load (0xdc008016).
Oct 16 00:18:55 HQ kernel[0]: Failed to load kext com.apple.iokit.IOUserEthernet (error 0xdc008016).
Oct 16 00:18:55 HQ com.apple.kextd[12]: Failed to load /System/Library/Extensions/IOUserEthernet.kext - (libkern/kext) link error.
Oct 16 00:18:55 HQ com.apple.kextd[12]: Load com.apple.iokit.IOUserEthernet failed; removing personalities from kernel.
Link to comment
Share on other sites

@drnick,

Thank you for this installer, it did not work with the realtek, but it showed an ethernet card just warned me it's unplugged, but resolved some conflicts, so I put back the Yukon based IONetworking and it worked. I finally resolved the sound using VoodooHDA, but only accompanied by HDA disabler, well the volume is very soft, but I have a sound device. I resolved the CMOS reset, using Pandora, any other AppleRTC kext patched didn't work. At least, I have a working Mavericks on p5k-vm.

Try this AppleRTC.kext.  Works for me 100% on Mavericks GM and Gigabyte EX58-UD5

AppleRTC.kext.zip

 

Good luck

 

:)

  • Like 1
Link to comment
Share on other sites

Will this work on any Motherboard needing the cmos reset patch?  Was the script posted here a few posts back to patch the vanilla one?

Yes, the binary Perl script is provided by oldnapalm in the following forum topic: AppleRTC patch (CMOS reset after sleep/wake)

sudo perl -pi -e 's|\x75\x2e\x0f\xb6|\xeb\x2e\x0f\xb6|' /AppleRTC.kext/Contents/MacOS/AppleRTC

For the convenience of all, here is the 10.9's AppleRTC.kext 2.0, Perl patched with the aforementioned script

to prevent the CMOS chip reset which occurs upon the Sleep mode invocation:

 

AppleRTC.kext-v2.0.zip

Link to comment
Share on other sites

Damn... not another GM :-(
Link to comment
Share on other sites

nvm, the installer image was 603 but installed 598

Inside the installer app that I got, the installer image is 10.9 13A603 while the installation packages identify as 10.8.5 12F45.  All of this according to the SystemVersion.plist's.

 

The MD5 of the InstallESD.dmg is f222952400db8535c03697c3293e168e

 

 

WTF

  • Like 1
Link to comment
Share on other sites

 Share

×
×
  • Create New...