Tiburon Posted May 18, 2006 Share Posted May 18, 2006 would be aewsome if it would work on 9500+ cards tried it on both my mobile 9600 and regular 9700 Pro, both produce gray screens when the login screen would have appeared. Link to comment https://www.insanelymac.com/forum/topic/17767-borisbadenov-ati-x1000-series-solution/page/2/#findComment-115120 Share on other sites More sharing options...
cyclonefr Posted May 18, 2006 Share Posted May 18, 2006 yeah same error...i hope it works with the X1600 AGP!! Link to comment https://www.insanelymac.com/forum/topic/17767-borisbadenov-ati-x1000-series-solution/page/2/#findComment-115125 Share on other sites More sharing options...
munky Posted May 18, 2006 Share Posted May 18, 2006 DAMN. no go on my X1800 PCI-E. just boots to a plain blue screen. any ideas? Link to comment https://www.insanelymac.com/forum/topic/17767-borisbadenov-ati-x1000-series-solution/page/2/#findComment-115132 Share on other sites More sharing options...
cyclonefr Posted May 18, 2006 Share Posted May 18, 2006 hum munky have u made the change to the whole atindrv and modified those two lines in X1000GA.plugin? i dont understand why it would only work on x1600 n specially the pro version since the XT is the one used in real intel macs. Link to comment https://www.insanelymac.com/forum/topic/17767-borisbadenov-ati-x1000-series-solution/page/2/#findComment-115136 Share on other sites More sharing options...
dio Posted May 18, 2006 Share Posted May 18, 2006 Just a stupid little question. But someone has tryed on ati9700.kext (and others), to apply this trick on a 9700, to know if it's work... Just my 2 cent question. Link to comment https://www.insanelymac.com/forum/topic/17767-borisbadenov-ati-x1000-series-solution/page/2/#findComment-115141 Share on other sites More sharing options...
cyclonefr Posted May 18, 2006 Share Posted May 18, 2006 yeah already tried, and even a long time ago grey screen no mouse there must be a hack if it doesnt work on X1800.... RobNYC does it work with the X1600 AGP?? if yes i know im gonna buy that Link to comment https://www.insanelymac.com/forum/topic/17767-borisbadenov-ati-x1000-series-solution/page/2/#findComment-115144 Share on other sites More sharing options...
kday Posted May 18, 2006 Share Posted May 18, 2006 Crazy! I was just about to try the exact same method as boris on my 9600 mobility, and then I came across this thread. Too weird. Probably won't work with 9600/9700 mobility, but it's worth a try. Link to comment https://www.insanelymac.com/forum/topic/17767-borisbadenov-ati-x1000-series-solution/page/2/#findComment-115153 Share on other sites More sharing options...
Phusho Posted May 18, 2006 Share Posted May 18, 2006 So kday how it will look on ATIRadeon9700.kext I wonder ? Link to comment https://www.insanelymac.com/forum/topic/17767-borisbadenov-ati-x1000-series-solution/page/2/#findComment-115175 Share on other sites More sharing options...
EdFlyer Posted May 18, 2006 Share Posted May 18, 2006 i just tried on a x600 card, but i goofed something when i was unloading callisto so i couldn't boot right. I am gonna try this again later probably from a cleaner standpoint (restore original 9700 kexts and try from there, but until then, 9700 status in the air.) Link to comment https://www.insanelymac.com/forum/topic/17767-borisbadenov-ati-x1000-series-solution/page/2/#findComment-115184 Share on other sites More sharing options...
autoy Posted May 18, 2006 Share Posted May 18, 2006 I have just gave it a go with x700 mobile and it's no go. I get a grey screen with 2 black stripes and then hangs. I guess current ATINDRV is for x1xxx cards. Link to comment https://www.insanelymac.com/forum/topic/17767-borisbadenov-ati-x1000-series-solution/page/2/#findComment-115201 Share on other sites More sharing options...
tokra128 Posted May 18, 2006 Share Posted May 18, 2006 My card is a CONNECT3D X1600XT and following your instruction it is working perfect !!! device ID is 0x71c0 BIG, BIG TANKS !!! Link to comment https://www.insanelymac.com/forum/topic/17767-borisbadenov-ati-x1000-series-solution/page/2/#findComment-115234 Share on other sites More sharing options...
kday Posted May 18, 2006 Share Posted May 18, 2006 From what I see, if you have an ATIRadeon9700.kext card follow the exact same steps, except set ATY,WORMY to VGA instead of display. I don't see why this wouldn't work. example: <key>IONameMatch</key><string>VGA</string> I gotta get to class, so I will try this after. I believe this should work. Link to comment https://www.insanelymac.com/forum/topic/17767-borisbadenov-ati-x1000-series-solution/page/2/#findComment-115242 Share on other sites More sharing options...
velayo Posted May 18, 2006 Share Posted May 18, 2006 My card is a CONNECT3D X1600XT and following your instruction it is working perfect !!! device ID is 0x71c0 BIG, BIG TANKS !!! Is that a AGP card or PCI-E? Because if it is AGP I'll be on my way to buy one Did a quick google search and found out that it is PCI-e. If somebody with an AGB card gets this to work please publish your information. Link to comment https://www.insanelymac.com/forum/topic/17767-borisbadenov-ati-x1000-series-solution/page/2/#findComment-115247 Share on other sites More sharing options...
macosxpanther Posted May 18, 2006 Share Posted May 18, 2006 the x1600xt sapphire pci-x is supported? function only in 10.4.4 .....? in 10.4.3 function? Link to comment https://www.insanelymac.com/forum/topic/17767-borisbadenov-ati-x1000-series-solution/page/2/#findComment-115248 Share on other sites More sharing options...
dio Posted May 18, 2006 Share Posted May 18, 2006 Oh yes my godd, one day it'll workkkkkkkk oupsss scuse me I'm drunk :D Link to comment https://www.insanelymac.com/forum/topic/17767-borisbadenov-ati-x1000-series-solution/page/2/#findComment-115249 Share on other sites More sharing options...
quietglow Posted May 18, 2006 Share Posted May 18, 2006 My card is a CONNECT3D X1600XT and following your instruction it is working perfect !!! device ID is 0x71c0 BIG, BIG TANKS !!! Could you give specifics? DVI or VGA? What monitor/resolution? PCIE or AGP?? That's the first report of it working with an XT (sam dev ID as mine) so I'm particularly interested. Link to comment https://www.insanelymac.com/forum/topic/17767-borisbadenov-ati-x1000-series-solution/page/2/#findComment-115250 Share on other sites More sharing options...
psikadelik Posted May 18, 2006 Share Posted May 18, 2006 From what I see, if you have an ATIRadeon9700.kext card follow the exact same steps, except set ATY,WORMY to VGA instead of display. I don't see why this wouldn't work. example: <key>IONameMatch</key><string>VGA</string> I gotta get to class, so I will try this after. I believe this should work. Let us know if it works after you test this out please. Others with ATI Mobility 9700s are interested in the results also! Link to comment https://www.insanelymac.com/forum/topic/17767-borisbadenov-ati-x1000-series-solution/page/2/#findComment-115251 Share on other sites More sharing options...
merak Posted May 18, 2006 Share Posted May 18, 2006 Could you give specifics? DVI or VGA? What monitor/resolution? PCIE or AGP?? That's the first report of it working with an XT (sam dev ID as mine) so I'm particularly interested. same dev id as mine at all....i'm totally tired i'd like to try now, but i think i'm gonna do that tomorrow i've no dvi cable at the mom...should i do it anyway?? my native res is 1440x900 Link to comment https://www.insanelymac.com/forum/topic/17767-borisbadenov-ati-x1000-series-solution/page/2/#findComment-115261 Share on other sites More sharing options...
Tiburon Posted May 18, 2006 Share Posted May 18, 2006 From what I see, if you have an ATIRadeon9700.kext card follow the exact same steps, except set ATY,WORMY to VGA instead of display. I don't see why this wouldn't work. example: <key>IONameMatch</key><string>VGA</string> I gotta get to class, so I will try this after. I believe this should work. I originally had that setup like on my laptop, but it doesnt work. Link to comment https://www.insanelymac.com/forum/topic/17767-borisbadenov-ati-x1000-series-solution/page/2/#findComment-115272 Share on other sites More sharing options...
tokra128 Posted May 18, 2006 Share Posted May 18, 2006 it is a pci-e card, conncected to vga port, sorry for not specify this in the post, it was more that excited ! Link to comment https://www.insanelymac.com/forum/topic/17767-borisbadenov-ati-x1000-series-solution/page/2/#findComment-115273 Share on other sites More sharing options...
Korrupted Posted May 18, 2006 Share Posted May 18, 2006 I tried kday's idea in conjunction with the rest of the instructions with an X800 XL. No dice(it used 9700.kext). Link to comment https://www.insanelymac.com/forum/topic/17767-borisbadenov-ati-x1000-series-solution/page/2/#findComment-115274 Share on other sites More sharing options...
cyclonefr Posted May 18, 2006 Share Posted May 18, 2006 anyone with an AGP X1600? ive tryed to change "display" to "VGA", it doesnt hang but doesnt load the ATINDRV.kext Link to comment https://www.insanelymac.com/forum/topic/17767-borisbadenov-ati-x1000-series-solution/page/2/#findComment-115277 Share on other sites More sharing options...
davegarbs Posted May 18, 2006 Share Posted May 18, 2006 Tried this on my Dell Inspiron 6000 x300m (device id 5460) with no luck... Link to comment https://www.insanelymac.com/forum/topic/17767-borisbadenov-ati-x1000-series-solution/page/2/#findComment-115278 Share on other sites More sharing options...
Tiburon Posted May 18, 2006 Share Posted May 18, 2006 it looks like ATINDRV needs ATIRadeonX1000.kext Because loading just ATIRadeonX1000 at boot by itself will cause a kernel panic almost immediately, whereas loading it with inconjunction of ATINDRV it goes all the way to the login screen and the screen has two lines. This is on a Mobile 9600 Link to comment https://www.insanelymac.com/forum/topic/17767-borisbadenov-ati-x1000-series-solution/page/2/#findComment-115296 Share on other sites More sharing options...
MacBlac Posted May 18, 2006 Share Posted May 18, 2006 I also get to the point where it is about to load the login screen and it hangs - X1800XT - Using 7100102 Link to comment https://www.insanelymac.com/forum/topic/17767-borisbadenov-ati-x1000-series-solution/page/2/#findComment-115302 Share on other sites More sharing options...
Recommended Posts