1208 replies to this topic

[Andy Vandijck]

byransays, on 11 January 2013 - 07:13 PM, said:

hmm..okay thank you for trying! one last question...is FakeSMC even needed? I know it used to be...but is it now with 64-bit?



Oh my...crap. I forgot my CPU doesnt support SSSE3 bit. I feel so dumb. Trying now.

You need a 64bit FakeSMC or my AppleDecrypt.kext from the Developers section...

[byransays]

Andy Vandijck, on 11 January 2013 - 07:33 PM, said:

You need a 64bit FakeSMC or my AppleDecrypt.kext from the Developers section...

I am using the new 4.etc that was just released yesterday which is 64-bit. Ill try your AppleDecrypt.kext though!

EDIT: Alright, in chameleon it still KP with fakesmc but if I use a USB Clover bootloader it goes all the way through to the desktop but I lose signal to my monitor.

EDIT 2: removed FakeSMC and chameleon boots like clover. Gets to the desktop and loses signal.

EDIT 3:I have it up and running in 64-bit mode. Graphics are only 1024x768 and not properly recognized, even doing multiple changes and doing what I used to have on the system(i.g. it working with qe/ci and 1080p resolution)

Andy, could it be related to me getting errors that your appledecrypt.kext failed to load during boot?

Edit4: no it couldnt be that I got fakesmc to work on clover(but not chameleon), I just got resolution to 1080p but I still dont have QE/CI

[MadMungo]

theconnactic, on 11 January 2013 - 04:33 PM, said:

Post please your complete specs. This instant reboot issue should have been obliterated from AMD machines.

Nope it is not, trust me as that is all my machine will do using the following

amd_kernel busratio=20 -v -f

Shows all the loading kexts then, BANG, instant reboot.

I think I am going to give up and try LION, then if that don't work I will stick with Snow Leopard as I know that is working 100%.

[Bitcore]

Hi,

So after installing SMBIOS on the usb drive, i still get the  rebooting problem.
Used both sinetek's and Andy's latest kernels.

/Extra:

Spoiler

http://imageshack.us...60/extraiq.png/

/Extra/extensions

Spoiler

http://imageshack.us...extensions.png/

/Extra/RemovedExtensions:

Spoiler

http://imageshack.us...extensions.png/

/Extra/Modules:

Spoiler

http://imageshack.us...4/modulesp.png/

(and no i'm not trying to install on virtual machine, this was the only way for me to make a screenshot)

Bitcore

the one time it worked, it booted up corecrypto.
corecrypto did some things and BAM installation.
But now it looks like it just wont load corecrypto ;/

BIOS settings:

Spoiler

[VVlasy]

I have FX-8120 as well and have the same issues...

[Gismo]

VVlasy, on 12 January 2013 - 11:46 PM, said:

I have FX-8120 as well and have the same issues...

Apparently not work FX CPUs!? Mine CPU also dosen't work.

[TheMentalist]

Got it to start the installation without any trouble except a few errors , used GraphicsEnabler=NO and npci=0x2000 , hope its boots up properly. keep posted.

[TheMentalist]

Install failed. " The installer could not start up the computer from the disk "  damn.     My settings are AHCI.

[PookyMacMan]

I'd just like to clear something up:

This thread is for help installing OS X on your machine. If you've installed it and have bugs, please post in the new Mountain Lion on AMD thread.

[Bitcore]

I gave you my specs,/extra folder and BIOS settings. Is there really nobody who can help me?

A sad bitcore ;(

EDIT: I might have created a bad USB Installer, please tell me how did you guys made it?
(Myhack or something?And wich version of chameleon?wich SMBIOS)

[VVlasy]

bit try adding to your current bootflags: "busratio=15 fsb=200" and tell me the results....

[theconnactic]

FX users, try the new kernel by oz, from here: http://www.insanelym...80#entry1880412

[Bitcore]

VVlasy, on 13 January 2013 - 02:46 PM, said:

bit try adding to your current bootflags: "busratio=15 fsb=200" and tell me the results....

In a minute EDIT: all kernels : Reboot

theconnactic, on 13 January 2013 - 03:46 PM, said:

FX users, try the new kernel by oz, from here: http://www.insanelym...80#entry1880412

In 2 minutes EDIT: tried all 3 kernels oz uploaded, all 3 rebooted :'(

[Mad Marcsen]

Bitcore, on 13 January 2013 - 05:38 PM, said:

In a minute EDIT: all kernels : Reboot

In 2 minutes EDIT: tried all 3 kernels oz uploaded, all 3 rebooted :'(

have you tried to add the following to your kernel flags: UseKernelCache=No -f

[Bitcore]

Reeeeeeboot ;s
Something really strange: when launching 10.6.4 using modbin_kernel it doesn't work when launched from chameleon.
It only works when launched from modcd ;0
what is happening?!?

[Deltac0]

Bitcore, on 13 January 2013 - 08:47 PM, said:

Reeeeeeboot ;s
Something really strange: when launching 10.6.4 using modbin_kernel it doesn't work when launched from chameleon.
It only works when launched from modcd ;0
what is happening?!?

When booted from ModCD, it also uses ModCD's kexts, could this be the problem?

[Bitcore]

If so ,does it mean I need some extra kext to make ML run?
i'll try to find wich kext's are added to mod CD, and hopefully find the ML compitable versions.
Hopefully this works!

[Deltac0]

Bitcore, on 13 January 2013 - 09:20 PM, said:

If so ,does it mean I need some extra kext to make ML run?
i'll try to find wich kext's are added to mod CD, and hopefully find the ML compitable versions.
Hopefully this works!

Wait a sec... You're booting ML on AMD from ModCD? I'd say ModCD is only for 10.6.x?

[Mad Marcsen]

i think deltac is right. modcd is really old. you'd better start off with a fresh install. it's really easy.

1. create ml usb drive with myhack.

2. copy the latest kernel from anv to the ml usb drive and replace the original.

3. if you need kext for your sata/ide (probably appleatiata or nforceata) copy them to e/e of your ml usb drive.

4. fix permissions

5. try

that's really close to vanilla. i think you have better chances with this

[Bitcore]

Nononono, I'm not booting ML install with modcd.
I did create a USB install disk with myhack and copied the kernel and corecrypto to it.
didn't add those SATA/IDE kext's tough, and also didn't fix permissions.
can i use kext wizard to fix permissions?

Try it tomorrow and I hope it works (:
Thanks for your support!

Bitcore