74 replies to this topic

[gils83]

Gigabyte GA-78LMT SP2/ FX 6100 @ 4,5 / MSI GT 610 1024 / Lion 10.7.5 / ML 10.8.3 (-x CG )

-Bootloader : Clover 1050
-LAN : ok
-Audio : not tested
-open/halt/restar : ok
- sleep : not tested

Config.plist :

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com...yList-1.0.dtd">
<plist version="1.0">
<dict>
<key>SystemParameters</key>
<dict>
<key>boot-args</key>
<string>GraphicsEnabler=Yes npci=0x2000</string>
<key>prev-lang:kbd</key>
<string>en:0</string>
<key>InjectSystemID</key>
<string>Yes</string>
<key>LegacyBoot</key>
<string>PBR</string>
</dict>
<key>CPU</key>
<dict>
<key>Turbo</key>
<string>Yes</string>
<key>ProcessorType</key>
<string></string>
<key>CpuFrequencyMHz</key>
<string>4500</string>
<key>BusSpeedKHz</key>
<string>200</string>
</dict>
<key>Pointer</key>
<dict>
<key>Speed</key>
<string>8</string>
</dict>
<key>Graphics</key>
<dict>
<key>GraphicsInjector</key>
<string>Yes</string>
<key>PatchVBiosBytes</key>
<dict>
<key>Find</key>
<data>gAeoAqAF</data>
<key>Replace</key>
<data>gAeoAjgE</data>
</dict>
</dict>
</dict>
</plist>

-kernel : Sinetek_kernel 11.4.2 for FX and -legacy for x4 960t (no patch)

-kernel: mach_sse42_only 12.2 Sinetek for FX 6100 and Phenom x4 960t + corecrypto.kext AnV .

GT 610 1024 : 19,45 fps , cinebench opengl 11.5 (o/c 4,5)

Edited by gils83, 22 March 2013 - 07:32 PM.

[theconnactic]

Gilles, i don't think you need GraphicsEnabler=Y in your boot flags array: Clover won't recognize it, and you already have GraphicsInjector=Yes under the Graphics section of your confg.plist. Maybe this is making your G610 underperform, since i get more than 25 points with the HD4000 integrated graphics of my i5 rig in Cinebench's OpenGL benchmark. By the way, are you booting from UEFI or using BIOS mode?

Congratulations for your build!

[gils83]

hello ,

it is normal for the GT 610 graphics card is a small model, this is not the 50 fps of the HD 4850. This is a test basis, the GTX 460 is 25 fps, but I do not think you could compare it to a HD 4000! ahahahah!
Must GE = Yes or no CI / QE, it is also normal.
for the motherboard, it's basic to 35 euros and it is not UEFI.
this is mainly to show the enormous potential of Clover, the frequency displayed is real which leads us to see a very successful operation on AMD platforms.
the system is very stable, not the shadow of a KP.
GraphicsInjector only used for cosmetics.

[theconnactic]

Are you sure it's not the other way around, GraphicsEnabler is cosmetic and GraphicsInjector is the responsible for your good result? GraphicsEnabler is not recognized by clover! It uses GraphicsInjector, which means the same thing, but is the only flag Clover can use for the task of injecting Graphics. Try removing GraphicsEnabler and you'll see.

Best regards!

[gils83]

Are you sure it's not the other way around, GraphicsEnabler is cosmetic and GraphicsInjector is the responsible for your good result? GraphicsEnabler is not recognized by clover! It uses GraphicsInjector, which means the same thing, but is the only flag Clover can use for the task of injecting Graphics. Try removing GraphicsEnabler and you'll see.

Best regards!

not with the chameleon, Graphicsinjector does not exist, I CI / QE with GE but the graphics card is unknown.

[burkett375]

CPU: AMD Phenom II 960T
Motherboard: Biostar TA880G+
RAM: 8GB DDR3 1333Mhz
SATA: 500GB Hitachi, Sony Optiarc DVD
USB 2.0: All ports work.
GPU: AMD Radeon HD 6870, works OOB
LAN: Realtek RTL8111E
Sound: Realtek ALC892, latest voodoo working

Bootloader: Chameleon 2.2 r2187

Lion 10.7.5, boot flags: -f, nossse3bit, usblegacy=off, npci=0x2000 arch=x86_64
Kernel: Bronya RC15

Edit: Got ML up and working, but with tons of graphics glitches (the only thing holding me back from using as a daily driver)
10.8.2, bootflags: -arch=x86_64, npci=0x2000
amd_kernel

Edited by burkett375, 13 May 2013 - 08:20 PM.

[Kikobeats]

Mountain Lion 10.8.2 @ amd_kernel

CPU: AMD Phenom II x4 965 BE @ 4GHz
Motherboard: Gigabyte UA-970A-UD3
RAM: 12GB DDR3 1600MHz
SATA: Samsung F1 500GB
USB All ports 2.0/3.0 works
GPU: ATI HD5850 1GB
LAN: Realtek RTL8169
Sound: Realtek ALC889[coming...]

SMBios? -> Check my historial

+info coming soon...

Attached Files

•  5850 @ Mountain Lion 10.8.2.zip   7.87MB   29 downloads
•  AppleRTL8169Ethernet_v1.1.4a5.zip   697.76KB   13 downloads
•  FakeSMC+Plugins.kext.zip   121.21KB   20 downloads

Edited by Kikobeats, 05 March 2013 - 08:42 PM.

[Deltac0]

Mountain Lion 10.8.2 @ amd_kernel

CPU: AMD Phenom II x4 965 BE @ 4GHz
Motherboard: Gigabyte UA-970A-UD3
RAM: 12GB DDR3 1600MHz
SATA: Samsung F1 500GB
USB All ports 2.0/3.0 works
GPU: ATI HD5850 1GB
LAN: Realtek RTL8169
Sound: Realtek ALC889[coming...]

SMBios? -> Check my historial

+info coming soon...

Does the graphics work without glitches?

[Kikobeats]

Does the graphics work without glitches?

Yes, but not with QE/QI effect. (is amd_kernel bug)

try my ATI drivers!

[Deltac0]

Yes, but not with QE/QI effect. (is amd_kernel bug)

try my ATI drivers!

I'm planning on trying to install ML again... My other HDD died, there went all of my Hackintosh stuff... Remember to backup!

[Maverick]

ONLY SNOW LEOPARD AND MOUNTAIN LION WORKING (LION =Still working on it )
ASUS M2N68 AM SE 2
AMD Athlon X64 LE 1640 2.71 GHZ
250 SSD
4GB DDR2 800MHZ
GEFORCE 9400GT 1GB
Everything is working under 10.6.8
LAN and 9400GT QE/CI not working in 10.8.2
i am using this kernel for Mountain Lion
https://www.dropbox.... AMD KERNEL.rar

[theconnactic]

CPU: AMD Athlon II X2 250 3.o Ghz
Motherboard: ECS A780LM-M2
RAM: 8GB DDR3 1333Mhz
SATA: 2X 500GB, DVD-R
PATA: 40GB (Windows 8)
USB 2.0: All 4 rear and 2 front ports work.
GPU: AMD Radeon HD 5450, works with kext plist edits and GE=Yes (also GE=No thanks to a DSDT edit, but reports as a HD5000)
LAN: Realtek RTL8111E, Realtek RTL8195E (onboard, not working)
Sound: Realtek VIA VT1705, latest voodoo working. HDMI audio not working

Bootloader: Chameleon 2.2 r2170

Mountain Lion 10.8.2, bootflags: amd_kernel, arch=x86_64, npci=0x2000, GraphicsEnabler=Y (latest Anv amd_kernel for 10.8.x)
System works fine, litlle to no graphics corruption (only Safari, heavily affected, and Chrome, almost never affected). Games, movies, animations and graphics benchmarks perform as expected from the card. Until now, only DVD Player (crashes upon launch), ArchiveUtility (becomes unusable a couple of hours after startup) and the zoom shortcut (have to reenable it in Accessibility PrefPane from time to time) don't work as they should. Geekbench score: 4400 +

Lion 10.7.5, boot flags: bronya_kernel, arch=i386, -nossse3bit, npci=0x2000, GraphicsEnabler=Y (Bronzovka's 10.7.5 RC7 kernel)
System works almost flawlessly, with full support for 64-bit applications and impecable graphics performance. Only HDMI audio doesn't work. Geekbench score: 4400 +

[Ringostar]

CPU: AMD Phenom II X4 925 2.8 Ghz
Motherboard: ASROCK 990FX Extreme3
RAM: 4GB DDR3 1333Mhz
SATA: 1X 500GB, 1X320GB, SSD120GB, DVD-R
USB 2.0: All 4 rear ports work
USB 3.0: 2 rear ports work
GPU: PALIT GTX 550ti, works OOB
LAN: BCM57781 works with kext
Sound: Audigy SB0350 works with kXAudioDriver-1.3b0
Bootloader: Cameleon 2.1 r2126

10.7.3 Lion, Kernel Lion 10.7.4-5 for AMD x86_64 Bit UPDATE 3, boot flags: -legacy arch=i386 npci=0x3000
Everything is working so far, except Quicktime Player. Geekbench score 6300

[zebaszp]

I feel my system works well enough to be posted here

CPU: AMD Phenom II X4 850 3.3 Ghz
Motherboard: Asus M5A78L-M LX
RAM: 4GB DDR3 1333Mhz
SATA: 1TB Seagate HDD
GPU: Radeon 3000 onboard (no kexts loaded; needless to say, no QE/CI, capped at 1024x768, very glitchy)
LAN: Realtek Gigabit Ethernet, not tested yet
Wi-Fi: TP-Link TL-WN881ND (Atheros AR9287 chip), works with this kext
Sound: Realtek HD onboard audio, works with VoodooHDA
Other OSs: Ubuntu 13.04 daily and Windows 8, installed beforehand, working in perfect harmony
Bootloader: GRUB 2*

10.8.3 Mountain Lion (upgraded from Retail through combo), with AnV kernel, patched for MBR, no flags. Apart from graphics, it works great. GraphicsEnabler=Yes won't boot.

*I have Chameleon on a USB stick for now, since the installer won't replace GRUB in the MBR; GRUB 2 detects OS X, but it doesn't boot the AMD kernel I found a way to get GRUB to chainload Chameleon, which can then load OS X

[Maverick]

This is my new system (Mountain Lion and Ubuntu)
Gigabyte GA 78LMT-S2PT
AMD Phenom II X2 560
Radeon HD 6770 FULL QE/CI
500 Sata HDD
4 GB DDR 3 1333 MHZ
Working
Sound by Voodoo
LAN Fine
On board ATI Radeon HD 3000 not tested

[gils83]

Gilles, i don't think you need GraphicsEnabler=Y in your boot flags array: Clover won't recognize it, and you already have GraphicsInjector=Yes under the Graphics section of your confg.plist. Maybe this is making your G610 underperform, since i get more than 25 points with the HD4000 integrated graphics of my i5 rig in Cinebench's OpenGL benchmark. By the way, are you booting from UEFI or using BIOS mode?

Congratulations for your build!

hello the connectic ,

you were right about GE=Yes, it is unnecessary for Clover, GraphicsInjector replaces

I corrected my config.plist


<key>boot-args</key>
<string>GraphicsEnabler=Yes npci=0x2000</string>
<key>prev-lang:kbd</key>
<string>en:0</string>
<key>InjectSystemID</key>
<string>Yes</string>
<key>LegacyBoot</key>
<string>PBR</string>

[puckmarin]

It's been a busy two days:

AMD Phenom II X4 955 Black Edition
Asus M4A78 Plus Motherboard
XFX Radeon 4890 1 GB Graphics Card
6 GB RAM

iATKOS L2 10.7.2

Working
Booted installer with the following flags: -legacy -v UseKernelCache=No GraphicsEnabler =No
Once installed booted with: -v -F UseKerneCache=No arch=i386 GraphicsEnabler=No npci=0x3000 EthernetBuiltIn=Yes

Graphics working with QE/CI Kext

iATKOS ML2 10.8.3

Working

Booted installer with the same flags used for L2
Initially Booted after install with: UseKernelCache=No GraphicsEnabler=No npci=0x3000

After installing QE/CI Kexts for 10.8.3 I changed "GraphicsEnabler" to Yes.

Everything Runs fine.

Initially I didn't have sound but I solved that issue by using speakers/mic connected via USB. Sound works perfectly now. No glitches.

Occasionally I see a graphics glitch in Chrome but that might be Chrome related.

[Bitcore]

CPU: AMD FX-8120 3.1GHz

Motherboard: ASROCK 970 Extreme4
RAM : 8GB DDR3 1333Mhz
SATA: 1X 250GB
USB 2.0: Works

USB 3.0: Works

GPU: XFX HD4890 (Exotic patch)

LAN:Realtek RTL8111E (works after patch)

Sound: Hercules DJ Instinct (USB DJ controller with build in soundcard) (Works OOB)
Bootloader:Clover EFI rL1050
10.8.2 Mountain Lion : Booting with only "npci=0x2000" using mach_sse42_only kernel.
No problems at all, fully works!

-can anybody fix the layout of this? I am not seeing what i am doing wrong :s-

Edited by theconnactic, 05 April 2013 - 03:46 PM.
Fixed! :D

[+ira]

CPU: AMD Athlon II X2 240;
Motherboard: ECS A740GM-M (1.0A);
RAM: 4GB DDR2;
IDE: DVD-RW;
USB: 2 front ports | 4 rear ports;
GPU: EVGA GeForce GT 440;
LAN: Atheros L2 (on board);
Sound: IDT 92HD202 (on board), HDMI audio (graphics card);
Storage:

SAMSUNG HD502HJ Media (500GB):

OS: Windows 8 (Not working);

SAMSUNG HD161GJ Media (160GB):

OS: OS X 10.8.3 Mountain Lion;

Installation Method: USB: BaseSystem + InstallESD Packages + Kernel + Chameleon;

Kernel: Latest AnV kernel (renamed to mach_kernel on trying to get QE but it doesn't help, anyway i can use kernel cache);

Bootloader: Chameleon 2.2svn 2187;

Bootflags: EBI=Y, GM, C&P States (don't know if it is mandatory), GE=Y, arch=x86_64, npci=0x2000, darkwake=0(don't know if it makes any difference), busratio=14(not tested without this);

Diagnostic: System seems to be pretty stable but it is under test anyway, disabled GeForceGA/GLD, ethernet working, fixed orange icons, "working" on getting QE, other things not tested yet;

WDC WD800BD-22MRA1 Media (80GB):

OS: OS X 10.6.3 Snow Leopard;

Installation Method: USB: Retail DVD + nawcom's ModUSB;

Kernel: Latest nawcom's legacy_kernel;

Bootloader: Chameleon 2.2svn 2187;

Bootflags: C&P States, GM, GE=Y, npci=0x3000, arch=i386, -force64, busration=14;

Diagnostic: Almost 100% working, still takes too long to boot and also freezes when arriving on desktop;

Hope this helps someone.

[itzvizionzx]

CPU: AMD Athlon II X3 440;
Motherboard: AMD A6GMV;
RAM: 2GB DDR3;
IDE: DVD-RW;
USB: 2 front ports | 4 rear ports;
GPU: Asus HD5450 (Silent);
Storage: 500GB Western Digital HDD

Western Digital Media (500GB):

OS: Windows 8 dual booting with 10.8.3

Western Digital Media (120GB):

OS: OS X 10.8.3 Mountain Lion;

Installation Method: USB: BaseSystem + InstallESD Packages + Kernel

Kernel: Latest AnV kernel (renamed to mach_kernel)

Bootloader: Chameleon 2.2svn 2187;

Bootflags: Pre install: GraphicsEnabler=No -v Post Install: GraphicsEnabler=Yes -v (when replaced the neccesary kexts)

Diagnostic: Everything appears to be working full acceleration etc just artifacts and missing text sometimes, still looking for a fix