856 replies to this topic

[magnifico]

kozlek, on 21 June 2012 - 07:34 PM, said:

Ninja!

Spia

[eep357]

p.H, on 21 June 2012 - 11:55 PM, said:

hi，kozlek
have u checked my post @ #497
since i am a notebook user, i am little curious about the display blabla
once i manually turn off the display , kernel log shows the info
however, sometimes , the display is still on but kernel log also shows the info
do u know what happened ?

plus, one of my friends find that using your category of fakesmc
there is one less option in EnergySaver Preference compared with Slice's rev609

From what I can gather,  the display blabla is normal, at least in debug mode. As to why you get it when the display has not been put to sleep, it could be triggered by other wake event's of which there are many. Check the pmset event log in terminal to see if there are any that correspond with those times: pmset -g log

[p.H]

report back again
using the latest revision, hdd temp won't disappear for as long as half an hour for my trial
but i found another interesting thing
look at the pic,  missing keys, those could be shown by Slice's version however
 Screen Shot 2012-06-23 at 7.52.53 AM.png   26.28K   59 downloads

[juanerson]

Same report here, i3 2330M.
 Captura de pantalla 2012-06-22 a la(s) 21.25.21.png   36.93K   90 downloads
Using Slice's FakeSMC rev609 (+ IntelCPUMonitor for monitoring) give to me more results, but no implementation of customized "RPlt"
 Captura de pantalla 2012-06-23 a la(s) 13.42.52.png   35.89K   72 downloads

[p.H]

juanerson, on 23 June 2012 - 01:53 AM, said:

Same report here, i3 2330M. Captura de pantalla 2012-06-22 a la(s) 21.25.21.png

is the app only compatible with Slice's fakesmc ?
or is it created for Slice's versions ?

[XLR]

magnifico10, on 21 June 2012 - 06:34 PM, said:

Please what is Ninja ?

http://www.youtube.c...WIP4-ZcNw#t=53s

[Gringo Vermelho]

Ninja within Jah!

[eep357]

Ninja need Jah!

[LIMITER]

I just installed ML DP4 and using the latest FakeSMC doesn't show the CPU temp, frequency and ratio.
I also have Lion 10.7.4 installed on another HDD and everything shows correctly using the same FakeSMC.
Any thoughts ?

P.S. - I have a Z68X-UD3H-B3 mobo.

[kozlek]

LIMITER, on 29 June 2012 - 11:29 AM, said:

I just installed ML DP4 and using the latest FakeSMC doesn't show the CPU temp, frequency and ratio.
I also have Lion 10.7.4 installed on another HDD and everything shows correctly using the same FakeSMC.
Any thoughts ?

P.S. - I have a Z68X-UD3H-B3 mobo.

I think you should install/reinstall IntelThermal plugin

[LIMITER]

kozlek, on 30 June 2012 - 02:40 PM, said:

I think you should install/reinstall IntelThermal plugin

Using the latest revision works . Thanks !

[mitch_de]

Question: (C2D, Gigybyte) Intelthermal
Temps working and changing / getting updated.
But the CPU Speed / Pstates never change / no updates in App+Menue. Always shown lowest multiplier *6  / lowest GHz. But CPU does stepping and sure runs Multiplier *10 too.
Otherwise geekbench result would be much less.

Attached Files

•  Bildschirmfoto 2012-07-04 um 12.43.23.jpg   68.42K   86 downloads

[kozlek]

mitch_de, on 04 July 2012 - 10:47 AM, said:

Question: (C2D, Gigybyte) Intelthermal
Temps working and changing / getting updated.
But the CPU Speed / Pstates never change / no updates in App+Menue. Always shown lowest multiplier *6  / lowest GHz. But CPU does stepping and sure runs Multiplier *10 too.
Otherwise geekbench result would be much less.

Did you tested your system with another monitoring software (msrdumper, HWSensors slice's branch)?

[mitch_de]

Yep, msrdumper shows that cpu stepping is working .

05.07.12 02:01:37,000 kernel: MSRDumper CoreMulti(6)
05.07.12 02:01:37,000 kernel: MSRDumper PStatesReached: 10
05.07.12 02:01:38,000 kernel: MSRDumper CoreMulti(10) // i put load on cpu
05.07.12 02:01:38,000 kernel: MSRDumper PStatesReached: 10
05.07.12 02:01:38,000 kernel: MSRDumper CoreMulti(6)
05.07.12 02:01:38,000 kernel: MSRDumper PStatesReached: 10
05.07.12 02:01:39,000 kernel: MSRDumper CoreMulti(6)
05.07.12 02:01:39,000 kernel: MSRDumper PStatesReached: 10
05.07.12 02:01:39,000 kernel: MSRDumper CoreMulti(10)  // i put load on cpu
05.07.12 02:01:39,000 kernel: MSRDumper PStatesReached: 10

[nyolc8]

I'm using fakesmc 4.0 on my C2D (Gigabyte MB) and HWMonitor (older version I think, that doesn't have that window.) shows the mhz/multiplier changing in real time.

[mitch_de]

Info: Now i can see that the multi/Ghz changes in realtime - but only in the menu.
Not in the main HW Monitor app - there it stays at the level which multi/Ghz were run as HW Monitor app has started.
in my case multi 6 if no load at HW Monitor app starts and multi 10 if an backgound task puts load on the cpu. Beside that fixed values i see changes in the menu.

I never looked at the menu so i didnt realise that there were really changes - i only looked at the fixed HW Monitor app window.
Perhaps its not planned to update the multi/Ghz,  temp in the main app - no problem if changed are updated in the menu.

Screenshoot shows updated (realtime) menu temp/Ghz and fixed (OTHER) HW Monitor App values.

Attached Files

•  Bildschirmfoto 2012-07-05 um 20.46.30.jpg   104.71K   66 downloads

[kozlek]

mitch_de, on 05 July 2012 - 06:48 PM, said:

Info: Now i can see that the multi/Ghz changes in realtime - but only in the menu.
Not in the main HW Monitor app - there it stays at the level which multi/Ghz were run as HW Monitor app has started.
in my case multi 6 if no load at HW Monitor app starts and multi 10 if an backgound task puts load on the cpu. Beside that fixed values i see changes in the menu.

I never looked at the menu so i didnt realise that there were really changes - i only looked at the fixed HW Monitor app window.
Perhaps its not planned to update the multi/Ghz,  temp in the main app - no problem if changed are updated in the menu.

Screenshoot shows updated (realtime) menu temp/Ghz and fixed (OTHER) HW Monitor App values.

I've already implemented realtime updates for prefs app in latest revision. Check it out.

I see icon names does not "localized", like "ssdlife" should be named "SSD Icon". Which Mac OS version do you use?

[mitch_de]

OS X 10.7.5 Dev.
I DL newer HW Monitor App (my was about 2 days old) and now also the main App showes updates.
THANKS

[DarkUser89]

no more GeForceX.kext ??

and new

ATYSensors.kext
NouveauSensors.kext

[mindlessmissy]

DarkUser89, on 08 July 2012 - 08:10 PM, said:

no more GeForceX.kext ??

and new

ATYSensors.kext
NouveauSensors.kext

Renaming GeForceX to NouveauSensors and RadeonX to ATYSensors. Bumping FakeSMC ver. and compatibile ver. to avoid old plugins loading.
kozlek authored 18 days ago