Jump to content

[pre-release] macOS Monterey 12.3

fantomas

By fantomas,
in New Releases and Updates

 Share
199 posts in this topic

Recommended Posts

mnfesq
mnfesq
Posted
Posted (edited)

I updated to beta 4 with no problems and I have no problems during the day when I am using my laptop.  But I close my lid and let the laptop go to sleep at night and when I wake up in the morning, it has rebooted due to a KP.  The KP is related to something called diagnosticid.  Any thoughts about the cause, other than that it's a beta version of macOS?

 

EDIT:  Problem solved.  It was unrelated to macOS 12.3 beta 4.  I was dealing with an issue where OpenCore did not accurately report my CPU Frequency and tested out VoodooTSCSync.  I didn't realize it but it and Lilu were installed to L/E rather than OpenCore/kexts.  I failed to uninstall it when it did not solve my problem and that was what was causing my kp's during sleep.  Once I deleted those kexts from L/E, the problem went away.

Edited by mnfesq
issoeocio
issoeocio
Posted
Posted
32 minutes ago, eSaF said:

Forgive me if I interpreted his last post incorrectly but as I understood it, he stated he didn't ask for anything but just posting. That aside I hope your post helps him out of his black screen problem.


Just relax, man. I am aware that my first post was missing information. I was just, en passant, describing what happened here and didn't have time to investigate further.

saCULar
saCULar
Posted
Posted
2 hours ago, eSaF said:

Trust me bro I am totally relaxed, I have left the hustle and bustle of day to day life many moons ago and now happily sipping on the last dregs of the summer wine.

While you are sipping the wine, eSaF have you tried the universal control features of 12.3?

 

chris1111
chris1111
Posted
Posted (edited)

Easy Update 12.3 beta 5 with Clover ESP Legacy boot0af 👍 Everythings is good Graphics Kepler GT 710

Spoiler

Untitled.png.dc2d91632c8f5e20a0ca6cda9a367edc.png

  

Clover EFI installer log - Mon Feb 28 19:50:56 EST 2022
Installer version: r5145 (commit: d3d536c44) EFI bootloader
======================================================
/dev/disk0 (internal, physical):
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *256.1 GB   disk0
   1:                        EFI ⁨EFI⁩                     209.7 MB   disk0s1
   2:                 Apple_APFS ⁨Container disk2⁩         255.9 GB   disk0s2

/dev/disk1 (internal, physical):
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *240.1 GB   disk1
   1:                        EFI ⁨EFI⁩                     209.7 MB   disk1s1
   2:                 Apple_APFS ⁨Container disk3⁩         239.8 GB   disk1s2

/dev/disk2 (synthesized):
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      APFS Container Scheme -                      +255.9 GB   disk2
                                 Physical Store disk0s2
   1:                APFS Volume ⁨Monterey HD - Data⁩      38.6 GB    disk2s1
   2:                APFS Volume ⁨Preboot⁩                 577.2 MB   disk2s2
   3:                APFS Volume ⁨Recovery⁩                1.1 GB     disk2s3
   4:                APFS Volume ⁨VM⁩                      1.1 GB     disk2s4
   5:                APFS Volume ⁨Monterey-DISK⁩           15.7 GB    disk2s5
   6:              APFS Snapshot ⁨com.apple.bless.A302...⁩ 15.7 GB    disk2s5s1

/dev/disk3 (synthesized):
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      APFS Container Scheme -                      +239.8 GB   disk3
                                 Physical Store disk1s2
   1:                APFS Volume ⁨SSD - Data⁩              64.2 GB    disk3s1
   2:                APFS Volume ⁨Preboot⁩                 154.8 MB   disk3s2
   3:                APFS Volume ⁨Recovery⁩                529.0 MB   disk3s3
   4:                APFS Volume ⁨VM⁩                      2.1 GB     disk3s4
   5:                APFS Volume ⁨SSD Catalina HD⁩         11.3 GB    disk3s5

Target volume /Volumes/Monterey-DISK on disk2 is APFS on physical store disk0s2
======================================================
Backing up EFI files

Backing up stage2 file /Volumes/Monterey-DISK/Private/tmp/EFIROOTDIR/boot  to /Volumes/Monterey-DISK//Users/chris/Clover EFI Backups/r5145/2022-02-28-19h50/boot
Backing up /Volumes/Monterey-DISK/Private/tmp/EFIROOTDIR/EFI folder to /Volumes/Monterey-DISK//Users/chris/Clover EFI Backups/r5145/2022-02-28-19h50/EFI
No Active Partition

Stage 0 - Writing boot0af to /dev/rdisk0
dd if=/dev/rdisk0 count=1 bs=512 of=/tmp/origMBR
cp /tmp/origMBR /tmp/newMBR
dd if=//Private/tmp/usr/standalone/i386/boot0af of=/tmp/newMBR bs=440 count=1 conv=notrunc
fdisk -f /tmp/newMBR -u -y /dev/rdisk0

Stage 1 - Writing boot1f32 to /dev/rdisk0s1
dd if=/dev/rdisk0s1 count=1 bs=512 of=/tmp/origbs
boot volume format is FAT32
cp /tmp/boot1f32 /tmp/newbs
dd if=/tmp/origbs of=/tmp/newbs skip=3 seek=3 bs=1 count=87 conv=notrunc
dd if=/tmp/newbs of=/dev/rdisk0s1

Stage 2 - Written boot6 (x64) to /Volumes/EFI/boot
======================================================
Installing RC Scripts

Installing RC scripts on target volume '/'


======================================================
=========== Clover EFI Installation Finish ===========
======================================================

 

 

Edited by chris1111
  • Like 7
jsl2000
jsl2000
Posted
Posted
2 hours ago, Common_Sense said:

Updated to 12.3 Beta (21E5227a) on my Intel 4770K hackintosh. All is good, seems Chrome issues are gone now.

For legacy OpenCore booting hackintoshs it still need set csr-active-config/Data/00000000 otherwise Firefox or Google Chrome got frozen on open.

  • Like 6
SavageAUS
SavageAUS
Posted
Posted (edited)

Update done but on AMD i get this strange shape on my screen. @Shaneee any suggestions?

Also if i change my refresh rate i get a black screen i cannot recover from and need to restore from time machine.

 

Spoiler

Screen Shot 2022-03-05 at 10.44.16 am.png

 

 

Spoiler

Screen Shot 2022-03-05 at 10.46.16 am.png

 

Edited by SavageAUS
SavageAUS
SavageAUS
Posted
Posted
[mention=1083558]SavageAUS[/mention] There have been some strange bugs with the 12.3 beta for a few people. I seen this on the first beta but only on the login screen with the default image. GPU performance seems to have taken a hit also. 

The shape goes away if I use a custom wallpaper, comes back with stock wallpapers.
Biggest problem I have is being stuck at 60hz.
I am creating a time machine backup now then I’ll try changing refresh rate.


Sent from my iPhone using Tapatalk
SavageAUS
SavageAUS
Posted
Posted

Hey guys, how do I boot into safe mode with OpenCore? I tried changing my refresh rate and got black screen. I have enablesafemodeslide true, pollapplehotkeys true and takeoffdelay at 5000 but using ctrl + x at the picker doesn’t work.

Anto65
Anto65
Posted
Posted

It works (for me) Shift + Enter, it is highlighted on login
"Safe Boot"

1444911611_Schermata2022-03-05alle11_22_12.png.6c618e5b1f95dffbe02aa9d382dcc4de.png

 

From pdf 

• CMD+C+MINUS — disable board compatibility checking.
• CMD+K — boot release kernel, similar to kcsuffix=release.
• CMD+S — single user mode.
• CMD+S+MINUS — disable KASLR slide, requires disabled SIP.
• CMD+V — verbose mode.
• Shift+Enter, Shift+Index — safe mode, may be used in combination with CTRL+Enter, CTRL+Index.

  • Like 3
SavageAUS
SavageAUS
Posted
Posted (edited)
1 minute ago, antuneddu said:

It works (for me) Shift + Enter, it is highlighted on login
"Safe Boot"

1444911611_Schermata2022-03-05alle11_22_12.png.6c618e5b1f95dffbe02aa9d382dcc4de.png

 

From pdf 

• CMD+C+MINUS — disable board compatibility checking.
• CMD+K — boot release kernel, similar to kcsuffix=release.
• CMD+S — single user mode.
• CMD+S+MINUS — disable KASLR slide, requires disabled SIP.
• CMD+V — verbose mode.
• Shift+Enter, Shift+Index — safe mode, may be used in combination with CTRL+Enter, CTRL+Index.

Maybe i have something wrong / set to false that should be true in config.

Do you have a source for setting config up for safe mode?

 

I did how ever manage to remote in and change the refresh rate which solved the issue.

Edited by SavageAUS
  • Like 4
Guest
This topic is now closed to further replies.
 Share
Go to topic listing
×
×
  • Create New...