Jump to content

[pre-release] macOS Monterey 12.3

fantomas

By fantomas,
in New Releases and Updates

 Share
214 posts in this topic

Recommended Posts

jsl2000
jsl2000
Posted
Posted
2 hours ago, Common_Sense said:

Updated to 12.3 Beta (21E5227a) on my Intel 4770K hackintosh. All is good, seems Chrome issues are gone now.

For legacy OpenCore booting hackintoshs it still need set csr-active-config/Data/00000000 otherwise Firefox or Google Chrome got frozen on open.

  • Like 6
Link to comment
Share on other sites
SavageAUS
SavageAUS
Posted
Posted (edited)

Update done but on AMD i get this strange shape on my screen. @Shaneee any suggestions?

Also if i change my refresh rate i get a black screen i cannot recover from and need to restore from time machine.

 

Spoiler

Screen Shot 2022-03-05 at 10.44.16 am.png

 

 

Spoiler

Screen Shot 2022-03-05 at 10.46.16 am.png

 

Edited by SavageAUS
Link to comment
Share on other sites
SavageAUS
SavageAUS
Posted
Posted
[mention=1083558]SavageAUS[/mention] There have been some strange bugs with the 12.3 beta for a few people. I seen this on the first beta but only on the login screen with the default image. GPU performance seems to have taken a hit also. 

The shape goes away if I use a custom wallpaper, comes back with stock wallpapers.
Biggest problem I have is being stuck at 60hz.
I am creating a time machine backup now then I’ll try changing refresh rate.


Sent from my iPhone using Tapatalk
Link to comment
Share on other sites
SavageAUS
SavageAUS
Posted
Posted

Hey guys, how do I boot into safe mode with OpenCore? I tried changing my refresh rate and got black screen. I have enablesafemodeslide true, pollapplehotkeys true and takeoffdelay at 5000 but using ctrl + x at the picker doesn’t work.

Link to comment
Share on other sites
Anto65
Anto65
Posted
Posted

It works (for me) Shift + Enter, it is highlighted on login
"Safe Boot"

1444911611_Schermata2022-03-05alle11_22_12.png.6c618e5b1f95dffbe02aa9d382dcc4de.png

 

From pdf 

• CMD+C+MINUS — disable board compatibility checking.
• CMD+K — boot release kernel, similar to kcsuffix=release.
• CMD+S — single user mode.
• CMD+S+MINUS — disable KASLR slide, requires disabled SIP.
• CMD+V — verbose mode.
• Shift+Enter, Shift+Index — safe mode, may be used in combination with CTRL+Enter, CTRL+Index.

  • Like 3
Link to comment
Share on other sites
SavageAUS
SavageAUS
Posted
Posted (edited)
1 minute ago, antuneddu said:

It works (for me) Shift + Enter, it is highlighted on login
"Safe Boot"

1444911611_Schermata2022-03-05alle11_22_12.png.6c618e5b1f95dffbe02aa9d382dcc4de.png

 

From pdf 

• CMD+C+MINUS — disable board compatibility checking.
• CMD+K — boot release kernel, similar to kcsuffix=release.
• CMD+S — single user mode.
• CMD+S+MINUS — disable KASLR slide, requires disabled SIP.
• CMD+V — verbose mode.
• Shift+Enter, Shift+Index — safe mode, may be used in combination with CTRL+Enter, CTRL+Index.

Maybe i have something wrong / set to false that should be true in config.

Do you have a source for setting config up for safe mode?

 

I did how ever manage to remote in and change the refresh rate which solved the issue.

Edited by SavageAUS
  • Like 4
Link to comment
Share on other sites
jsl2000
jsl2000
Posted
Posted
On 3/2/2022 at 7:10 AM, chris1111 said:

Easy Update 12.3 beta 5 with Clover ESP Legacy boot0af 👍 Everythings is good Graphics Kepler GT 710

  Hide contents

Untitled.png.dc2d91632c8f5e20a0ca6cda9a367edc.png

  

Clover EFI installer log - Mon Feb 28 19:50:56 EST 2022
Installer version: r5145 (commit: d3d536c44) EFI bootloader
======================================================
/dev/disk0 (internal, physical):
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *256.1 GB   disk0
   1:                        EFI ⁨EFI⁩                     209.7 MB   disk0s1
   2:                 Apple_APFS ⁨Container disk2⁩         255.9 GB   disk0s2

/dev/disk1 (internal, physical):
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *240.1 GB   disk1
   1:                        EFI ⁨EFI⁩                     209.7 MB   disk1s1
   2:                 Apple_APFS ⁨Container disk3⁩         239.8 GB   disk1s2

/dev/disk2 (synthesized):
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      APFS Container Scheme -                      +255.9 GB   disk2
                                 Physical Store disk0s2
   1:                APFS Volume ⁨Monterey HD - Data⁩      38.6 GB    disk2s1
   2:                APFS Volume ⁨Preboot⁩                 577.2 MB   disk2s2
   3:                APFS Volume ⁨Recovery⁩                1.1 GB     disk2s3
   4:                APFS Volume ⁨VM⁩                      1.1 GB     disk2s4
   5:                APFS Volume ⁨Monterey-DISK⁩           15.7 GB    disk2s5
   6:              APFS Snapshot ⁨com.apple.bless.A302...⁩ 15.7 GB    disk2s5s1

/dev/disk3 (synthesized):
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      APFS Container Scheme -                      +239.8 GB   disk3
                                 Physical Store disk1s2
   1:                APFS Volume ⁨SSD - Data⁩              64.2 GB    disk3s1
   2:                APFS Volume ⁨Preboot⁩                 154.8 MB   disk3s2
   3:                APFS Volume ⁨Recovery⁩                529.0 MB   disk3s3
   4:                APFS Volume ⁨VM⁩                      2.1 GB     disk3s4
   5:                APFS Volume ⁨SSD Catalina HD⁩         11.3 GB    disk3s5

Target volume /Volumes/Monterey-DISK on disk2 is APFS on physical store disk0s2
======================================================
Backing up EFI files

Backing up stage2 file /Volumes/Monterey-DISK/Private/tmp/EFIROOTDIR/boot  to /Volumes/Monterey-DISK//Users/chris/Clover EFI Backups/r5145/2022-02-28-19h50/boot
Backing up /Volumes/Monterey-DISK/Private/tmp/EFIROOTDIR/EFI folder to /Volumes/Monterey-DISK//Users/chris/Clover EFI Backups/r5145/2022-02-28-19h50/EFI
No Active Partition

Stage 0 - Writing boot0af to /dev/rdisk0
dd if=/dev/rdisk0 count=1 bs=512 of=/tmp/origMBR
cp /tmp/origMBR /tmp/newMBR
dd if=//Private/tmp/usr/standalone/i386/boot0af of=/tmp/newMBR bs=440 count=1 conv=notrunc
fdisk -f /tmp/newMBR -u -y /dev/rdisk0

Stage 1 - Writing boot1f32 to /dev/rdisk0s1
dd if=/dev/rdisk0s1 count=1 bs=512 of=/tmp/origbs
boot volume format is FAT32
cp /tmp/boot1f32 /tmp/newbs
dd if=/tmp/origbs of=/tmp/newbs skip=3 seek=3 bs=1 count=87 conv=notrunc
dd if=/tmp/newbs of=/dev/rdisk0s1

Stage 2 - Written boot6 (x64) to /Volumes/EFI/boot
======================================================
Installing RC Scripts

Installing RC scripts on target volume '/'


======================================================
=========== Clover EFI Installation Finish ===========
======================================================

 

 

Unfortunately after your V1 or V2 GeoForce Kepler Patcher My LGA775 P5Q Pro hackintosh got Panic with reboot.

How can I fix this issue ?

IMG-0129.JPG

Link to comment
Share on other sites
Joshua60
Joshua60
Posted
Posted

OC 0.7.9 release and OC 0.8.0 release latest hang on 'EB LOG EXITBS START' by booting on my Z490.

 

Tried also with troubleshooting by Dortana, no chance. I need some help if possible.

 

I'am not sure to be on the right place, but any suggestion is welcome.

 

Thank you

Link to comment
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing
×
×
  • Create New...