[pre-release] macOS Monterey

[Henties]

My Monterey upgrade - from Big Sur 11.5 beta 2 - to a spare Samsung SSD completed without problems other than that the Intel 225-v onboard ethernet controller is not working, therefore I am networking with WiFi via my Fenvi controller.

At the same time I am also trying to streamline my OC 0.7.1 EFI folder and discovered that I have forgotten why I have a 

SSDT-DMAC.aml as wel as a SSDT-PPMC.aml file present in my ACPI section.

I temporarily, as a test only, removed these to files to discover that my hack seems to be working as well without these files as it does with those files included. Would therefore appreciate if somebody could explain the purpose of these 2 files, and whether it would be wise to keep them removed.

 

Greetings Henties

[deeveedee]

@Henties DMAC and PPMC are in the ACPI of real MacMini8,1 which is why I first included the SSDTs in my hack.  Testing with and without them produced no differences for me, so for my hack, they appear to be purely cosmetic.  They haven't hurt anything, so I just left them in my ACPI, but as you've observed, I don't think they are necessary.

[matgeo]

Does anyone have probem with bluetooth (BROADCOM BCM94360CS2) turned off after long sleep , and not turning on until reboot?

[asdesoso]

9 hours ago, pompis12 said:

 

You must put the automatic start of session in the first boot, but when you change any stop entering the desktop.. that's what happened to me once on my T430, and I had to reinstall  ..

 

I don't have graphic acceleration 😕

 

Regards

 

  Reveal hidden contents

Veo que somos españoles los dos jajaja.... lo que dices me ha pasado a mi, si no pones el inicio de sesiòn automatico para que entre sin pedir contraseña, hay veces que cuando va cargar el escritorio, se va a modo verbose, y no sale de ahi.... y en cuanto cambies algùn kext o configuraciòn, deja de entrar al sistema para siempre.... yo no he sido capaz de solucionarlo y he tenido que volver a reinstalar Monterey.... Està verdisima la cosa, por lo menos en el tema de mi portatil y la aceleracion gràfica... no hay manera joer

 

 

Un Saludooteee compañero 🤗

 

 

Hi @pompis12 I finally be able to get full QE/CI on HD4000 in Monterey.

 

Today was a hard day hehe, but finally I got it.

Spoiler

Ya veo jeje Que gusto da tener por aquí a un español también, gracias por la ayuda 😉

The process is, first as you said previously, enable auto login, because without doing this, we can´t follow to the next steps.

So after reach the desktop, I ran the OCLP, the latest Nightly, and the script detects me the HD 4000 Ivy Bridge and patch me the root volume, I have also tried to put manually into S/L/E the 6 binaries files downloaded from your previous link, but still haven´t QE/CI, but with this script it finally results succesfull.

Cheers.

[PoMpIs]

4 hours ago, PG7 said:

config.plist -> ARGS -> "amfi_get_out_of_my_way=1" (Clover & OpenCore) + "-no_compat_check"
CsrActiveConfig -> 0xFEF

SMBIOS -> MacBookPro9,1 / MacBookPro9,2 (Install SMBIOS MacBookPro12,1)

Patch kext = OpenCore Legacy Patcher V 0.1.7 Last commit 

mandatory Ethernet 

Thanks @JakeLuke + Team OCLP 

https://github.com/dortania/OpenCore-Legacy-Patcher/tree/0.1.6

Many thanks 🤗..

 

Tomorrow i try

 

P.S: Thanks to all of you who make this possible

 

3 hours ago, miliuco said:

 

Hello, every time I use this application you are talking about, BigSurmountsrw, I get the same warning regardless of the volume I select in the initial window of the app.
In your case it works well?

  Reveal hidden contents

 

 

Yes, it works perfectly for me..

 

 

56 minutes ago, asdesoso said:

 

Hi @pompis12 I finally be able to get full QE/CI on HD4000 in Monterey.

 

Today was a hard day hehe, but finally I got it.

  Reveal hidden contents

Ya veo jeje Que gusto da tener por aquí a un español también, gracias por la ayuda 😉

The process is, first as you said previously, enable auto login, because without doing this, we can´t follow to the next steps.

So after reach the desktop, I ran the OCLP, the latest Nightly, and the script detects me the HD 4000 Ivy Bridge and patch me the root volume, I have also tried to put manually into S/L/E the 6 binaries files downloaded from your previous link, but still haven´t QE/CI, but with this script it finally results succesfull.

Cheers.

 

 

 

This is great ... long life Lenovo T430 😆..

 

Tomorrow I get to it

 

Regards

Edited June 13, 2021 by pompis12

[AlfredoM]

Hello Friends

 

I installed the Monterey over my 11.4 with the full installer. My Intel HD630 (not Intel UHD 630 !!!) no longer shows graphics support.

At 11.5 Beta2 everything was still fine.

 

My Samsung UHD Monitor works on DisplayPort, is this maybe a problem in macOS 12 Monterey ?

 

I put the bootarg: -lilubetaall.

 

I work with OpenCore 0.6.6

 

Or do I have to do a new clean installation? thinks that there is no full graphics support with the Intel HD630?

 

Thanks for help tips. My Problem is solved... i have new AppleALC-kext und new Lilu-Kext and new WEG-Kext and all works we befor with 11.4 Big Sur.

Edited June 14, 2021 by AlfredoM

[Anto65]

21 minutes ago, AlfredoM said:

Hello Friends

 

I installed the Monterey over my 11.4 with the full installer. My Intel HD630 no longer shows graphics support.

At 11.5 Beta2 everything was still fine.

 

My Samsung UHD Monitor works on DisplayPort, is this maybe a problem in macOS 12 Monterey ?

 

I put the bootarg: -lilubetaall.

 

I work with OpenCore 0.6.6

 

Or do I have to do a new clean installation? thinks that there is no full graphics support with the Intel HD630?

 

Thanks for help tips.

in the system report it is visible ? Update kext... OC

 

Edited June 14, 2021 by antuneddu

[SavageAUS]

in the system report it is visible ? Update kext... OC
 

Looks fine to me.


Sent from my iPhone using Tapatalk

[AlfredoM]

Thank you for help @SavageAUS and @antuneddu

Edited June 14, 2021 by AlfredoM

[ameenjuz]

Great job @dhinakg 

my first issue bluetooth of Dell 1560 BCM94352z is solved by installing BluetoolFixup.kext BrcmPatchRam3.kext BrcmFirmwareData.kext on macOS 12 now bluetooth is working fine but doesn't provide fully bluetooth info in sys

Here link https://github.com/acidanthera/BrcmPatchRAM/pull/12

Spoiler

 

my second issue is sleep&wake still persist it is not wake from sleep by pressing power button

after long sleep i force restart my machine then i get this report

anyone know any idea for this issue and other hand my machine is working fine sleep&wake on big sur 11.4

Spoiler

 

Edited June 14, 2021 by ameenjuz
edited

[pico joe]

11 hours ago, PG7 said:

Hi @PG7 I see u have atheros 9285 .. it is worked ?

 

 

 

[mnfesq]

1 hour ago, ameenjuz said:

Great job @dhinakg 

my first issue bluetooth of Dell 1560 BCM94352z is solved by installing BluetoolFixup.kext BrcmPatchRam3.kext BrcmFirmwareData.kext on macOS 12 now bluetooth is working fine but doesn't provide fully bluetooth info in sys

Here link https://github.com/acidanthera/BrcmPatchRAM/pull/12

  Hide contents

 

 

Would you mind posting your compiled BluetoolFixup.kext.  I couldn't get it to compile because I have a bunch of missing files and am too lazy to find and download them but not too lazy to ask you to post your work.

Edited June 14, 2021 by mnfesq

[jsl2000]

10 hours ago, asdesoso said:

 

Hi @pompis12 I finally be able to get full QE/CI on HD4000 in Monterey.

 

Today was a hard day hehe, but finally I got it.

  Reveal hidden contents

Ya veo jeje Que gusto da tener por aquí a un español también, gracias por la ayuda 😉

The process is, first as you said previously, enable auto login, because without doing this, we can´t follow to the next steps.

So after reach the desktop, I ran the OCLP, the latest Nightly, and the script detects me the HD 4000 Ivy Bridge and patch me the root volume, I have also tried to put manually into S/L/E the 6 binaries files downloaded from your previous link, but still haven´t QE/CI, but with this script it finally results succesfull.

Cheers.

Thanks and my desktop HD4000 also working now !

[Guest 5T33Z0]

13 hours ago, Henties said:

My Monterey upgrade - from Big Sur 11.5 beta 2 - to a spare Samsung SSD completed without problems other than that the Intel 225-v onboard ethernet controller is not working, therefore I am networking with WiFi via my Fenvi controller.

At the same time I am also trying to streamline my OC 0.7.1 EFI folder and discovered that I have forgotten why I have a 

SSDT-DMAC.aml as wel as a SSDT-PPMC.aml file present in my ACPI section.

I temporarily, as a test only, removed these to files to discover that my hack seems to be working as well without these files as it does with those files included. Would therefore appreciate if somebody could explain the purpose of these 2 files, and whether it would be wise to keep them removed.

 

Greetings Henties

 

I added those when I created my Z490 Vision G EFI. SSDT-DMAC is for the Direct Memory Access Controller and SSDT-PPMC is for the Platform Power Management Controller. In my experience, PPMC helps to lower the CPU frequencies even more in idle. As far as DMAC is concerned, I don't know if it has benefits, though.

[MorenoAv]

Hi guys,

macOS Monterey is a pita, today at first boot, it didn't boot again, I don't know why.

The only way for it to boot was with the usb installer, and it boots fine, anyone could tell me what is wrong?

Thanks

config.plist.zip

Edited June 14, 2021 by MorenoAv

[PG7]

7 hours ago, pico joe said:

 

No Work MonteRey .... 

 

[PG7]

54 minutes ago, MorenoAv said:

Hi guys,

macOS Monterey is a pita, today at first boot, it didn't boot again, I don't know why.

The only way for it to boot was with the usb installer, and it boots fine, anyone could tell me what is wrong?

Thanks

config.plist.zip 4.29 kB · 2 downloads

put your OC

it strikes me as something with kext Wifi

1 - block WIFI kext to test boot

2 - deletes the Quirks Patch XHCI limit as it has mapped kext

3 - update the kext such as lilu, whatevergreen, alc and VirtualSMC for the latest one and delete the lilubetaall and other beta args

i'm using google translate

[fusion71au]

On 6/9/2021 at 9:15 PM, fusion71au said:

However noticed ProperTree plist editor loads in black screen window 🤔.

 

@corpnewt has acknowledged the bug and detailed a work-around to build a working ProperTree.app for macOS Monterey Beta1...

 

It appears the default tk implementation that ships with macOS Monterey doesn't display correctly. A workaround is to download and install python from python.org (which has a compatible tk bundled), then use the buildapp-select.command located in ProperTree's Scripts directory to build an application bundle targeting the installed python's path.

Seems Apple borked tk (again - it was also borked in the first few versions of Big Sur) - and the most straightforward workaround is to install python and build the ProperTree.app targeting that version.

 

Spoiler

 

Attached ProperTree.app_Monterey.zip

[Ludox]

Monterey pc ThinkCentre desktop

[SavageAUS]

On 6/11/2021 at 9:11 PM, bisdak4920 said:

Solved, I switch to phyton 3. Thanks everybody.

I've used the buildapp-python3.command to build in python 3 but i still get the black screens.

What else did you do?

[PG7]

17 minutes ago, SavageAUS said:

I've used the buildapp-python3.command to build in python 3 but i still get the black screens.

What else did you do?

follow the step correctly and not what you did!

nowhere was indicated to use "buildapp-python3.command" but rather "buildapp-select.command" sue in case it all works

Edited June 14, 2021 by PG7

[bisdak4920]

10 minutes ago, SavageAUS said:

I've used the buildapp-python3.command to build in python 3 but i still get the black screens.

What else did you do?

Maybe I was just lucky cause in my other Hack (Ivy Bridge) I could not replicate my success.

 

[deeveedee]

4 hours ago, 5T33Z0 said:

 

I added those when I created my Z490 Vision G EFI. SSDT-DMAC is for the Direct Memory Access Controller and SSDT-PPMC is for the Platform Power Management Controller. In my experience, PPMC helps to lower the CPU frequencies even more in idle. As far as DMAC is concerned, I don't know if it has benefits, though.

I also noticed that my car goes faster after I wash it.

[Guest 5T33Z0]

@tonyx86 Friction is a mother… 😂

[jsl2000]

2 hours ago, fusion71au said:

 

@corpnewt has acknowledged the bug and detailed a work-around to build a working ProperTree.app for macOS Monterey Beta1...

 

It appears the default tk implementation that ships with macOS Monterey doesn't display correctly. A workaround is to download and install python from python.org (which has a compatible tk bundled), then use the buildapp-select.command located in ProperTree's Scripts directory to build an application bundle targeting the installed python's path.

Seems Apple borked tk (again - it was also borked in the first few versions of Big Sur) - and the most straightforward workaround is to install python and build the ProperTree.app targeting that version.

 

  Reveal hidden contents

 

Attached ProperTree.app_Monterey.zip

Thanks for your version of ProperTree.app, but I can not open it due to lack of permission.

How can I fix it ?