blackosx Posted February 25, 2021 Author Share Posted February 25, 2021 So they behave differently? Well done for testing. Thanks for the idea, though there are a million possibilities of how an icon can look and what an icon can be. It's all down to individual taste and vision. You are free to customise any icon you wish. If you want to have a circular shell button then great, go ahead and generate some. Link to comment https://www.insanelymac.com/forum/topic/344251-opencanopy-icons/page/14/#findComment-2751826 Share on other sites More sharing options...
miliuco Posted February 25, 2021 Share Posted February 25, 2021 (edited) @antuneddu @blackosx Yes, ResetNVRAM reboots but CleanNvram remains at OpenCore menu. I think reboot it's not needed after CleanNvram but I'm not sure. Otherwise, both of them seem to perform the same action. Edited February 25, 2021 by miliuco Link to comment https://www.insanelymac.com/forum/topic/344251-opencanopy-icons/page/14/#findComment-2751829 Share on other sites More sharing options...
Anto65 Posted February 25, 2021 Share Posted February 25, 2021 I think reboot it's not needed .... can confirm that the restart is necessary, if you try to re-enter without restarting you have the following error, if in doubt I have disabled this tool I do not enjoy it so much Link to comment https://www.insanelymac.com/forum/topic/344251-opencanopy-icons/page/14/#findComment-2751830 Share on other sites More sharing options...
Andrey1970 Posted February 25, 2021 Share Posted February 25, 2021 CleanNvram.efi is intended for use without OpenCore. 4 1 Link to comment https://www.insanelymac.com/forum/topic/344251-opencanopy-icons/page/14/#findComment-2751833 Share on other sites More sharing options...
miliuco Posted February 25, 2021 Share Posted February 25, 2021 50 minutes ago, Andrey1970 said: CleanNvram.efi is intended for use without OpenCore. I did not know. I have sometimes used it from the OpenCore menu to test and apparently it empties NVRAM and macOS starts fine with or without restarting after using it, I do not have the error of @antuneddu Link to comment https://www.insanelymac.com/forum/topic/344251-opencanopy-icons/page/14/#findComment-2751835 Share on other sites More sharing options...
Andrey1970 Posted February 25, 2021 Share Posted February 25, 2021 1 minute ago, miliuco said: I did not know. I have sometimes used it from the OpenCore menu to test and apparently it empties NVRAM and macOS starts fine with or without restarting after using it, I do not have the error of @antuneddu CleanNvram.efi and built-in ResetNvram, equivalents when using with OpenCore. CleanNvram.efi doesn't do reboot automatically, you shall make reboot. Use CleanNvram.efi without OpenCore (For example from SHELL when SHELL is loaded as bootx64.efi) for full clean. 3 1 Link to comment https://www.insanelymac.com/forum/topic/344251-opencanopy-icons/page/14/#findComment-2751839 Share on other sites More sharing options...
cecekpawon Posted February 26, 2021 Share Posted February 26, 2021 Playing around with [Windows] AngelCode Bitmap Font Generator + Candara font. I can confirm OpenCanopy actually hangs with "Do not include kerning pairs" option leave unchecked in Font Settings. Or will refuse to load if the font have font-size != 12px. Attached my bmf-config file + generated files. *Rename generated files .fnt to .bin and remove sequenced *_0.png suffix. Font.zip 4 1 Link to comment https://www.insanelymac.com/forum/topic/344251-opencanopy-icons/page/14/#findComment-2751887 Share on other sites More sharing options...
blackosx Posted February 26, 2021 Author Share Posted February 26, 2021 Since OpenCore can now boot all versions of macOS I've added the missing 10.4-10.11 icons from my Set3 range. These include drive icons and also badge icons. Here's a preview. 3 hours ago, cecekpawon said: Playing around with [Windows] AngelCode Bitmap Font Generator + Candara font. I can confirm OpenCanopy actually hangs with "Do not include kerning pairs" option leave unchecked in Font Settings. Or will refuse to load if the font have font-size != 12px. Attached my bmf-config file + generated files. *Rename generated files .fnt to .bin and remove sequenced *_0.png suffix. Font.zip 4.18 kB · 6 downloads Nice! Thanks @cecekpawon I'll try it out. 6 1 Link to comment https://www.insanelymac.com/forum/topic/344251-opencanopy-icons/page/14/#findComment-2751896 Share on other sites More sharing options...
Matgen84 Posted February 26, 2021 Share Posted February 26, 2021 18 minutes ago, blackosx said: Since OpenCore can now boot all versions of macOS I've added the missing 10.4-10.11 icons from my Set3 range. These include drive icons and also badge icons. Here's a preview. Nice! Thanks @cecekpawon I'll try it out. Great job. I don't find them in your GitHub repo. 1 Link to comment https://www.insanelymac.com/forum/topic/344251-opencanopy-icons/page/14/#findComment-2751897 Share on other sites More sharing options...
blackosx Posted February 26, 2021 Author Share Posted February 26, 2021 (edited) I've updated OpenCanopyIconsSetBuilder to v0.1.7 (link in first post), to now include the ResetSystem icons. The script works pretty well but the number of choices is growing so there's more to answer before getting the icons.... I'll have to work on some web app instead to allow viewing and selecting icons to download from the repo. 11 minutes ago, Matgen84 said: Great job. I don't find them in your GitHub repo. Yeah, sorry it's not easier at the moment. The builder script doesn't go as deep as that. The only way to get those for now is to checkout the whole repo, or download the repo as a ZIP, and navigate to: For drives with macOS icons: Set3/<COLOUR>/HardDrive/Apple/ For OS badges: Set3/OsBadges/Coloured/ Edited February 26, 2021 by blackosx 2 1 Link to comment https://www.insanelymac.com/forum/topic/344251-opencanopy-icons/page/14/#findComment-2751898 Share on other sites More sharing options...
Anto65 Posted February 26, 2021 Share Posted February 26, 2021 30 minutes ago, blackosx said: Since OpenCore can now boot all versions of macOS I've added the missing 10.4-10.11 icons from my Set3 range. These include drive icons and also badge icons. Here's a preview. Nice! Thanks @cecekpawon I'll try it out. Professional !!! Link to comment https://www.insanelymac.com/forum/topic/344251-opencanopy-icons/page/14/#findComment-2751899 Share on other sites More sharing options...
blackosx Posted February 26, 2021 Author Share Posted February 26, 2021 Lol.. I don't know about that, but thanks. I'm happy with them. 1 Link to comment https://www.insanelymac.com/forum/topic/344251-opencanopy-icons/page/14/#findComment-2751900 Share on other sites More sharing options...
miliuco Posted February 26, 2021 Share Posted February 26, 2021 7 hours ago, blackosx said: Since OpenCore can now boot all versions of macOS I've added the missing 10.4-10.11 icons from my Set3 range. These include drive icons and also badge icons. Here's a preview.... Very very nice!!! I like all them. Link to comment https://www.insanelymac.com/forum/topic/344251-opencanopy-icons/page/14/#findComment-2751924 Share on other sites More sharing options...
BuXb Posted February 27, 2021 Share Posted February 27, 2021 On 8/14/2020 at 10:48 AM, blackosx said: I've been playing around with OpenCore's font support and think how it's currently done is great, though it limits the possibilities of customisation (maybe by design to keep it more in line with Apple's UI) Font size cannot change much as the lineHeight must be 12 or 24 (if x2) for OpenCore to accept it. Fonts PNGs can only be mono, so no coloured fonts, and shading will prove difficult due to the tight random placement of the glyphs in the AngelCode BMF. Having said that I've generated some different ones to maybe give the UI a slightly different look, if wanted. Here's an image showing different slices of a selection to show each font looks in the UI Reveal hidden contents Aller.zip Calibri.zip Candara.zip ebrima.zip framd.zip FuturaLight.zip gadugi.zip Tahoma.zip Verdana.zip I just replaced OC's stock Font folder from acidanthera/OcBinaryData/Resources/ with the Font folder of the framd font, but now I only get a grey screen after the boot chime. Here's my current config: Do these fonts require a different setting somewhere, or even special theme resources? Link to comment https://www.insanelymac.com/forum/topic/344251-opencanopy-icons/page/14/#findComment-2751976 Share on other sites More sharing options...
blackosx Posted February 27, 2021 Author Share Posted February 27, 2021 Yeah, the fonts I generated back in August last year do indeed seem to be incorrect and cause OC to hang. It’s only recently been discovered (check the last 20 posts or so). They did work for me at the time but I guess they weren’t thoroughly tested. I know @cecekpawon recently posted a new font here which I haven’t had a chance to test yet but I believe that will work. Apologies for any inconvenience. 1 1 Link to comment https://www.insanelymac.com/forum/topic/344251-opencanopy-icons/page/14/#findComment-2751979 Share on other sites More sharing options...
BuXb Posted February 27, 2021 Share Posted February 27, 2021 (edited) ah OK - thanks for replying so quickly. @blackosx could you add what you just wrote at the top of your font posting so I'm the last to stumble over this? I saw cecekpawon's recent post, but the Candara font is not a gain but a regression in terms of better readability which is what I'm trying to achieve w/o lowering the res. Is there any chance you could tweak your fonts from back then for current OC conformity? Esp. framd, Verdana and Aller really look great on your screenshot composite. Edited February 27, 2021 by BuXb Link to comment https://www.insanelymac.com/forum/topic/344251-opencanopy-icons/page/14/#findComment-2751980 Share on other sites More sharing options...
blackosx Posted February 27, 2021 Author Share Posted February 27, 2021 Sure. Done. (Thanks for the reminder. This week has been full on with work, plus the extra time I’ve been putting in to these icons I hadn’t got round to it yet.) I will look further in to the fonts next week. 1 1 Link to comment https://www.insanelymac.com/forum/topic/344251-opencanopy-icons/page/14/#findComment-2751981 Share on other sites More sharing options...
BuXb Posted February 27, 2021 Share Posted February 27, 2021 Awesome! The new icons are really neat. I'm back to the stock font folder for now. 1 Link to comment https://www.insanelymac.com/forum/topic/344251-opencanopy-icons/page/14/#findComment-2751982 Share on other sites More sharing options...
blackosx Posted February 28, 2021 Author Share Posted February 28, 2021 (edited) On 2/26/2021 at 11:55 AM, cecekpawon said: I can confirm OpenCanopy actually hangs with "Do not include kerning pairs" option leave unchecked in Font Settings. Thank you! It was indeed the kerning pairs causing the problem Thanks to the note from @cecekpawon about the kerning pairs, the fonts issue has been resolved and I've now generated new font images which I've successfully tested in Qemu (though only at 1x Scale). Aller_Bd.zip calibri.zip Candara.zip corbel.zip ebrima.zip framd.zip FuturaLight.zip gadugi.zip Edited February 28, 2021 by blackosx 3 2 Link to comment https://www.insanelymac.com/forum/topic/344251-opencanopy-icons/page/14/#findComment-2751998 Share on other sites More sharing options...
BuXb Posted February 28, 2021 Share Posted February 28, 2021 (edited) @blackosx you're breaking the rules of physics - officially we're not capable of faster than the speed of The framd indeed is slightly better readable @ UIScale=1 on my screen (15,6" @ 1920x1080) than the stock OC font - still not as comfortable as it could (and as in Clover GUI with exact same background). Have you ever tried the Terminus font, by any chance? It ranks highest on 6 Best bitmap programming fonts as of 2021 - Slant, and the dev is fine-tuning it constantly (last time 2 months ago) Edited February 28, 2021 by BuXb 2 Link to comment https://www.insanelymac.com/forum/topic/344251-opencanopy-icons/page/14/#findComment-2752009 Share on other sites More sharing options...
blackosx Posted February 28, 2021 Author Share Posted February 28, 2021 Yeah, faster than expected. I managed to grab some time today to take a look. Thanks for the nod towards the Terminus typeface. I’ll try it when I next get to my machine. 1 Link to comment https://www.insanelymac.com/forum/topic/344251-opencanopy-icons/page/14/#findComment-2752010 Share on other sites More sharing options...
blackosx Posted February 28, 2021 Author Share Posted February 28, 2021 @BuXb Here you go... Terminus.zip TerminusBold.zip It may be a great programming font but I don't think it works too well in this instance. framd is still the strongest, so far... 1 1 Link to comment https://www.insanelymac.com/forum/topic/344251-opencanopy-icons/page/14/#findComment-2752013 Share on other sites More sharing options...
Anto65 Posted February 28, 2021 Share Posted February 28, 2021 Mayday! it's been half an hour I've been fighting with icons but I can't win , practically I added an icon for Ubuntu I can't see it I renamed it in Ubuntu, Other, grubx64.efi with and without Modern variant ... it doesn't work ,small help? thank you Link to comment https://www.insanelymac.com/forum/topic/344251-opencanopy-icons/page/14/#findComment-2752017 Share on other sites More sharing options...
BuXb Posted February 28, 2021 Share Posted February 28, 2021 (edited) @blackosx wow, quite a magician you are - kudos. Yes, you're right. I went straight for the bolder type face but the numbers are too jagged + the font is too small. So for now, until OC allows scaling of some sorts e.g. via a setting for dedicated 13px/ 14px/ 15px pixel fonts, framd seems like the best choice. I'd even say the OC team might want to choose it as default. @antuneddu haven't tried myself but saved this link in my bookmarks Edited February 28, 2021 by BuXb Link to comment https://www.insanelymac.com/forum/topic/344251-opencanopy-icons/page/14/#findComment-2752018 Share on other sites More sharing options...
Anto65 Posted February 28, 2021 Share Posted February 28, 2021 5 minutes ago, BuXb said: @blackosx wow, quite a magician you are - kudos. Yes, you're right. I went straight for the bolder type face but the numbers are too jagged + the font is too small. So for now, until OC allows scaling of some sorts e.g. via a setting for dedicated 13px/ 14px/ 15px pixel fonts, framd seems like the best choice. I'd even say the OC team might want to choose it as default. @antuneddu haven't tried myself but saved this link in my bookmarks thanks, but I already have the entries for both Windows and Ubuntu defined in the config and from opencore I boot all of them, the problem does not show me the right icons Link to comment https://www.insanelymac.com/forum/topic/344251-opencanopy-icons/page/14/#findComment-2752019 Share on other sites More sharing options...
Recommended Posts