Jump to content
5539 posts in this topic

Recommended Posts

4 hours ago, tasc said:

 

I just checked my HEVC, and it is unavailable as well. I'm pretty sure this was working at some point before on my same config, so not sure if 15.2 update changed it or not. Some people were able to fix this using an HevcEnabler.kext, but it didn't work for me.

 

@hungrywallet is your HEVC working over there on 19,1?

 

Worked for me with HevcEnabler.kext on iMacPro1,1, was red and now its green..  

13 hours ago, AudioGod said:


I strictly only use 1,1 on my own build and have zero interest of having my igpu enabled. (I hate it)

With the 5700xt my resolution from my clover bootloader all the way up to full boot up is on 1440p on my dell and stays at 1440p and never moves. However I had a Samsung 28” 4K before the dell and I got all of the problems your describing plus add to that my clover bootloader was stuck at the 800x600 and this was while using my Vega56. It was so bad and annoying that I ended up switching to the dell and I haven’t looked back since.

Dang. Well I'm stuck with this stupid LG (bought it before making the Hack). I'll try to look into it when I have more time.

 

I redid my system using 19,1 and couldn't be happier. The dGPU is still being used over the iGPU but everything works, even Sidecar. And the system is far snappier than on 1,1 :)

Edited by Tiem
  • Like 1

Can anyone tell me the settings required and EFI, DSDT, files to be able to use my UHD 630 IGPU with my MacOS but use the RTX 2070 on Windows. Is there a way to have MAC ignore the GPU and only recognize the IGPU? I don't want to have to keep unplugging my GPU every time I want to log into Mac. Im currently using the EFI and DSDT Files with the RX580, i7-8700k. If anyone can help me id greatly appreciate it !

All these issues (DRM content crashing, HEVC disabled etc) I couldn't stand them so I reverted back to iMac19,1 SMBIOS EFI with my iGPU enabled.

 

Then I found out that AppleTV was not working either (10.15.2) (player opened and crashed instantly) so what I did was I built and updated Lilu on 1.4.1 and WhateverGreen on 1.3.6 and added shikigva=16 on the Boot Arguments.

 

Now Netflix and other DRM content on Safari won't play but won't crash either, and AppleTV seems to be working fine. I also have HEVC activated on Video Proc and Sidecar works A-A.

 

Photo attached as proof (The Netflix Screen is actually the "Something went wrong" stuff in Greek)

IMG_7667.jpg

Edited by WizeMan
31 minutes ago, Tiem said:

Try 


shikigva=80

 

 

Do you have Netflix working with WEG 1.3.6 and shikigva=80 ? BTW I own an RX 580 Pulse not a 5700XT

Edited by WizeMan
8 hours ago, WizeMan said:

All these issues (DRM content crashing, HEVC disabled etc) I couldn't stand them so I reverted back to iMac19,1 SMBIOS EFI with my iGPU enabled.

 

Then I found out that AppleTV was not working either (10.15.2) (player opened and crashed instantly) so what I did was I built and updated Lilu on 1.4.1 and WhateverGreen on 1.3.6 and added shikigva=16 on the Boot Arguments.

 

Now Netflix and other DRM content on Safari won't play but won't crash either, and AppleTV seems to be working fine. I also have HEVC activated on Video Proc and Sidecar works A-A.

 

Photo attached as proof (The Netflix Screen is actually the "Something went wrong" stuff in Greek)

 

 

I've gone through that same exercise and found the same results.


You can get HEVC working on iMacPro1,1 again by using either HEVCEnabler or dummy152 kexts. One targets the 580, while the other works on my 560 (they just patch different frame buffers).

 

I think the only benefit I see running 19,1 is the machine doesn't lock up with safari DRM and just shows a recoverable error instead. However, I see other strangeness like the activity monitor app taking a long time to launch compared to iMacPro1,1.

  • Like 1
20 minutes ago, tasc said:

 

I've gone through that same exercise and found the same results.


You can get HEVC working on iMacPro1,1 again by using either HEVCEnabler or dummy152 kexts. One targets the 580, while the other works on my 560 (they just patch different frame buffers).

 

I think the only benefit I see running 19,1 is the machine doesn't lock up with safari DRM and just shows a recoverable error instead. However, I see other strangeness like the activity monitor app taking a long time to launch compared to iMacPro1,1.


There is someone claiming on another thread that got FairPlay working on iMac SMBIOS by using dummy152.kext, shikigva=16 shiki-id=Mac-7BA5B2D9E42DDD94 

 

He has an RX460 though.

 

As I’m not at the office I will try tomorrow morning (it’s 20:30 here) but if you have time you can definitely check it out.

On 12/11/2019 at 12:35 PM, tasc said:

 

I just checked my HEVC, and it is unavailable as well. I'm pretty sure this was working at some point before on my same config, so not sure if 15.2 update changed it or not. Some people were able to fix this using an HevcEnabler.kext, but it didn't work for me.

 

@hungrywallet is your HEVC working over there on 19,1?

I'll try once I get home and report back.

 

54 minutes ago, WizeMan said:


There is someone claiming on another thread that got FairPlay working on iMac SMBIOS by using dummy152.kext, shikigva=16 shiki-id=Mac-7BA5B2D9E42DDD94 

 

He has an RX460 though.

 

As I’m not at the office I will try tomorrow morning (it’s 20:30 here) but if you have time you can definitely check it out.

 

I'll also be trying this as well though I have a 5700XT.

9 hours ago, WizeMan said:

 

Do you have Netflix working with WEG 1.3.6 and shikigva=80 ? BTW I own an RX 580 Pulse not a 5700XT

Yes. Netflix and TV both work just fine.

4 hours ago, hungrywallet said:

I'll try once I get home and report back.

 

 

I'll also be trying this as well though I have a 5700XT.

 

So HEVC works as normal.  Netflix also now works with shikigva=80 on my 5700 XT, 19,1.  I did update both Lilu and WEG to latest developer builds.  Guess DRM Gate is over now.

So I've tried shikigva=16 shiki-id=Mac-7BA5B2D9E42DDD94 with and without dummy152.kext / HEVCEnabled.kext.

 

Nothing changes for iMac19,1 RX580.

 

The DRMGate persists :(

 

This is so weird though. With my previous motherboard and CPU (z370m ds3h, i3-8350k) I had AppleTV, Netflix and Prime working with shikigva=1 on 10.15.1. (WEG 1.3.5) with just headless mode on device properties for the UHD 630.

Edited by WizeMan

A Note ABOUT DRM GATE

 

Please people go easy about the broken DRM issues, I have seen two MacBook Pro’s with the same problem using a FireWire connected GPU so the problem runs deep and it’s something that Apple and or WEG will resolve in time. 
I feel like it’s getting all a bit OTT now concerning this problem and my thread is absolutely saturated with DRG GATE. Just relax everybody and chill and it will be resolved sooner or later. :wallbash:


Question, Who actually watches Netflix or any other streaming service bar maybe Kodi on there hacks in reality anyway?

 

Edited by AudioGod
52 minutes ago, AudioGod said:



I need 2 or 3 volunteers who are willing to try my new EFI under 19,1.

who's game?

@hungrywallet Your hack is top of my list to try it if your up for it?

 

I'm in if my Specs are OK with you

i9-9900K

RX 580 Pulse 8GB

2 minutes ago, WizeMan said:

 

I'm in if my Specs are OK with you

i9-9900K

RX 580 Pulse 8GB

Yes your do perfect brother.

il will send you the new EFI within the next hour. :thumbsup_anim:

Edited by AudioGod
3 hours ago, AudioGod said:



I need 2 or 3 volunteers who are willing to try my new EFI under 19,1.

who's game?

@hungrywallet Your hack is top of my list to try it if your up for it?

Sure, let me get it when you get the chance.

8 hours ago, AudioGod said:



I need 2 or 3 volunteers who are willing to try my new EFI under 19,1.

who's game?

@hungrywallet Your hack is top of my list to try it if your up for it?

 

Did you change the DSDT or is it all config changes?

 

Also with regards to DRM gate, I don't think anyone is freaking out about it, I actually don't even use that stuff much anyway and can just as easily use it in chrome. I think most of the people on here are just very focused on getting a 100% working system and your EFI/guide is so good, DRM is the only problem we have left to talk about. And we love tinkering with our builds! :D This place would be boring if we didn't have anything to mess with.

2 minutes ago, tasc said:

 

Did you change the DSDT or is it all config changes?

 

Also with regards to DRM gate, I don't think anyone is freaking out about it, I actually don't even use that stuff much anyway and can just as easily use it in chrome. I think most of the people on here are just very focused on getting a 100% working system and your EFI/guide is so good, DRM is the only problem we have left to talk about. And we love tinkering with our builds! :D This place would be boring if we didn't have anything to mess with.

@tasc you tell my inbox that mate. It’s beyond a joke now tbh. :wallbash:
 

no changes to the DSDT but I’ve done something very special indeed mainly with the drivers. 
for instance, not using Aptiomemoryfix or anything else related to the old UEFI drivers

Edited by AudioGod

Hi,

First of all, thank you for your efi and guide, it was really easy to start with my first hackintosh.

 

I've a i5 9600k, sapphire rx 580 pulse and i had lot's of stop signs on boot, then changed to 19,1 and OsxAptioFix2Drv-free2000 as you suggested in first post and it is working great for some time.

 

if you want I can test your new efi version.

Thanks

1 hour ago, AudioGod said:

@tasc you tell my inbox that mate. It’s beyond a joke now tbh. :wallbash:
 

no changes to the DSDT but I’ve done something very special indeed mainly with the drivers. 
for instance, not using Aptiomemoryfix or anything else related to the old UEFI drivers

 

Ah interesting, I'm guessing you are going opencore route with OcQuirks and FwRuntimeServices? I've seen in another forum where they have replaced AptioMemoryFix by using those. Interested to see how it turns out.

×
×
  • Create New...