AudioGod's Aorus Z390 Pro Patched DSDT Mini Guide and Discussion

[velopitex]

2 hours ago, Blesh said:

 

Finally my computer is also working perfect with your EFI files, just like it was made for me. Thank you so much!

You're welcome friend!

[AudioGod]

5 hours ago, velopitex said:

Great to hear it bro  

You’re welcome.

Hey Pal,

I got three different peoples 5700 XT systems up and running last night using my EFI and they are all perfect. Using both 1,1 and 19,1. I have looked through your EFI you created and it’s not right buddy.

if you want me to help you get yours fully up and running then just let me know and il help you out?

im at work now but still available for you so just give me a shout and I will make a new EFI for you do use.

private message me your EFI complete so I can create a new one using your details for you  

Edited November 25, 2019 by AudioGod

[hungrywallet]

 

I repurchased the Gigabyte Aorus 5700 XT for no reason whatsoever and it appears to be working great.

 

Edited November 25, 2019 by hungrywallet

[AudioGod]

5 minutes ago, hungrywallet said:

 

I repurchased the Gigabyte Aorus 5700 XT for no reason whatsoever and it appears to be working great.

 

Good stuff buddy,

im so glad it’s all working for you.

we got there in the end didn’t we?
 

@hungrywallet how you finding the Z390 Master?

you happy with it over the pro?

 

Edited November 25, 2019 by AudioGod

[hungrywallet]

1 minute ago, AudioGod said:

Good stuff buddy,

im so glad it’s all working for you.

we got there in the end didn’t we?

 

Yup,

Thanks for all the help.  I can finally stop messing with my system and get back to work on it.  Now I'm thinking about getting rid of my dual 1440P monitor setup and just going with a single big 4K lol. 

 

I wish the Master thread had more activity.

[AudioGod]

4 minutes ago, hungrywallet said:

I wish the Master thread had more activity.

For me that’s actually a good thing as the Master EFI has been downloaded over 300 times now and the lack of noise on the thread means people are getting it to work without having to get help. 
That makes me happy TBH.....Like the saying goes, No news is good news sometimes....

Edited November 25, 2019 by AudioGod

[hungrywallet]

1 hour ago, AudioGod said:

For me that’s actually a good thing as the Master EFI has been downloaded over 300 times now and the lack of noise on the thread means people are getting it to work without having to get help. 
That makes me happy TBH.....Like the saying goes, No news is good news sometimes....

True.

[gabe.p]

If anyone has a opencore variant of audiogods EFI id appreciate a link thank you

[AudioGod]

Just now, gabe.p said:

If anyone has a opencore variant of audiogods EFI id appreciate a link thank you

we do and it’s going to be posted on the thread very soon so stay tuned buddy.  

[On1ric]

21 hours ago, AudioGod said:

Put the script on your desktop then open your terminal and simply drag and drop the script into your terminal box adding the ./ before patch-edid.rb and then hit enter and it will create the file. Take a note of where it saved the folder to and then drag the created folder onto your desktop.

then using the clover app unlock your system files and then restart. Once restarted just put that created folder into /System/Library/Displays/Contents/Resources and merge it with the existing folder. Then go back into the clover app and lock your system file back up, restart and it should be done. 
let me know if A that made sense and B it worked for you? 

 

Hi, I just tried, I get the exact same error

 

Traceback (most recent call last):

1: from patch-edid.rb:9:in `<main>'

patch-edid.rb:9:in `scan': invalid byte sequence in UTF-8 (ArgumentError)

 

 

 

[AudioGod]

2 minutes ago, On1ric said:

 

Hi, I just tried, I get the exact same error

 

Traceback (most recent call last):

1: from patch-edid.rb:9:in `<main>'

patch-edid.rb:9:in `scan': invalid byte sequence in UTF-8 (ArgumentError)

 

 

 

your doing it wrong buddy,

do it again and before you press enter and try it copy and paste the command to me and il double check and correct it if need be for you

[AudioGod]

@On1ric this is what the line should look like with the patch on your desktop

 

/Users/NAME/Desktop/./patch-edid.rb

 

Change NAME to your User ID

 

after the folder is created put it on your desktop (it will say in terminal where it saved the folder) and then run this command

 

Sudo mount -uw / 

 

followed by 

 

Sudo cp -R /Users/NAME/Desktop/DisplayVendorID-4c2d /System/Library/Displays/Contents/Resources/Overrides

 

Changing NAME to your user ID and VendorID-4c2d is a example of the name of the folder so again you change that to whatever the one created is called

 

Restart the system and that should be that.

Edited November 25, 2019 by AudioGod

[On1ric]

Yes, that's exactly what I'm doing. The command always gives me the same error.

Googling around, it seems that the System Integrity Protection must be disabled, which is done in recovery mode, and apparently I can't access it through standard means (cmd+R). I read that SIP can also be disabled from clover configurator this way, but the idea of touching this wonderful EFI makes me a bit uncomfortable: 

https://www.tonymacx86.com/threads/solved-cant-disable-sip-el-capitan.176151/#post-1130943

 

Edited November 25, 2019 by On1ric

[AudioGod]

 

6 minutes ago, On1ric said:

Yes, that's exactly what I'm doing. Googling around, it seems that the System Integrity Protection must be disabled, which is done in recovery mode, and apparently I can't access it through standard means (cmd+R). I read that SIP can also be disabled from clover configurator this way, but the idea of touching this wonderful EFI makes me a bit uncomfortable: 

https://www.tonymacx86.com/threads/solved-cant-disable-sip-el-capitan.176151/#post-1130943

 

 

It’s a simple change within the clover config.

RtVariables CsrActiveConfig=0x67, BooterConfig=0x28 equals SIP Disabled 

Edited November 25, 2019 by AudioGod

[On1ric]

Actually, it looks like it's like that already

[AudioGod]

@On1ric Ok just to make life simple do it in safe mode. That should work too. There’s a setting in cat I’m missing that I can’t remember.....ggggrrrrrrrr @larabee what am I forgetting ? (It’s been a long day)

Edited November 25, 2019 by AudioGod

[On1ric]

No problem man, thank you for all your help in the meantime, when you'll remember the way to access recovery I will try to get it fixed from there. By the way, I have 2 more questions: 

1- I set up the serial, MAC address etc as explained by Glasgood, I did exactly as he did by taking the MAC address from the ethernet settings, but I'm actually using wifi, is it correct anyway, or I should use the wifi MAC address instead?

2- The system went to sleep a couple times tonight and I was so excited in seeing it getting back from sleep perfectly. It went to sleep for a third time after a while and it was a complete mess on wakeup, I experienced heavy lag, took many seconds just to move a window around the desktop, tried to shut down and it freezed completely (only the mouse was still working fine, no lag at all, everything else was frozen). Had to shut down using the power button, booted Mac again and got a black screen with the "prohibition" signal that usually shows up during failed installation attempts. 

Logged back into windows, shut down correctly, booted Mac again and it worked, I'm now in again and everything runs smooth. Is there any way to prevent this in the future?

[AudioGod]

9 minutes ago, On1ric said:

No problem man, thank you for all your help in the meantime, when you'll remember the way to access recovery I will try to get it fixed from there. By the way, I have 2 more questions: 

1- I set up the serial, MAC address etc as explained by Glasgood, I did exactly as he did by taking the MAC address from the ethernet settings, but I'm actually using wifi, is it correct anyway, or I should use the wifi MAC address instead?

2- The system went to sleep a couple times tonight and I was so excited in seeing it getting back from sleep perfectly. It went to sleep for a third time after a while and it was a complete mess on wakeup, I experienced heavy lag, took many seconds just to move a window around the desktop, tried to shut down and it freezed completely (only the mouse was still working fine, no lag at all, everything else was frozen). Had to shut down using the power button, booted Mac again and got a black screen with the "prohibition" signal that usually shows up during failed installation attempts. 

Logged back into windows, shut down correctly, booted Mac again and it worked, I'm now in again and everything runs smooth. Is there any way to prevent this in the future?

Go into the bios and change the igpu from 64mb to 32mb and that should help with the kp boot errors at start up. Also if your having strange problems sometimes when it wakes from sleep then it’s usually a usb device causing trouble so best thing to do is remove all Usb devices apart from the mouse and keyboard for now and see if it stops and if it does then slowly put stuff back until you find the problem device. 

[On1ric]

I only have mouse and kb as usb devices. The only things I did since the previous sleep are: I paired an original magic keyboard (Bluetooth), and I installed chrome. I also attached a pair of headphones (with jack, not usb) but detached them just a couple minutes later, much before it went to sleep

[AudioGod]

6 minutes ago, On1ric said:

I only have mouse and kb as usb devices. The only things I did since the previous sleep are: I paired an original magic keyboard (Bluetooth), and I installed chrome. I also attached a pair of headphones (with jack, not usb) but detached them just a couple minutes later, much before it went to sleep

What’s your Bluetooth device?

is it a usb one?

[On1ric]

No, I'm using the wifi/bt combo advised by Glasgood in his guide: BCM943602CS

[WizeMan]

Hi! Bit of a hardware question as this is my first build with such hi-end CPU (intel 9900K) and this AORUS motherboard:

 

I updated the BIOS to F11 Before installing the CPU.

 

I install the cpu, cooling etc, but the motherboard does not post. The CPU_LED remains lit and does not circle through all other LEDS in order to get to post.

 

I 've tried re installing the CPU in case there is bad placement, reseting the BIOS by plugging power and removing the battery but everything is the same.

 

I have a corsair 650W and nothing else but the M.2. and the Fenvi Installed (unplugged the RX 580 to make sure about power) so I do not think it is a power issue (the connector is the 2x4 from my PSU)

 

Other CPUs work on the motherboard ( I tried a Celeron) but I do not have another motherboard to try out the i9-9900K.

 

I have started an RMA process but thought I 'd post here in case I have missed something as I haven't touched much hardware since 15 years ago when I bought my first Mac.

Edited November 26, 2019 by WizeMan

[WizeMan]

29 minutes ago, texem said:

 

btw this is off-topic here, but - remove power cable, remove the CMOS battery (3,6 Volt Li) , wait 3 to 5 minutes. Short the CMOS clear jumper near the Frontpanel-connector.

Insert battery and fire the system up . the 4 LED's near the Frontpanel-connector indicate a) there is life , b) BIOS init

 

 

I know it's off-topic (sorry) but this is a 9900k or similar cpu post with AORUS z390 Pro so I thought if there is some info I can get, this is where.

 

I've tried all this but nothing. I 'm going for CPU replacement

 

Sorry again for the off-topic.

Edited November 26, 2019 by WizeMan

[AudioGod]

@WizeMan You need to open a ticket with gigabyte support, unfortunately this thread is not for PC Repairs that have nothing to do with Hacks so please stay on topic on here or take it private.

thanks guys  

[Contedracula081]

On 11/11/2019 at 7:31 PM, ilcondannato said:

 

 

Vai su amazon e prendi questa, dovrebbe funzionare: https://www.amazon.it/ASHATA-Wireless-Originale-943602CS-Bluetooth/dp/B07QB5RFHP/ref=sr_1_1?__mk_it_IT=ÅMÅŽÕÑ&amp;keywords=Abwb+802.11AC+Wi-Fi&amp;qid=1573496990&amp;s=pc&amp;sr=1-1 

 

Io ho preso questa e funziona da dio...ma non è più disponibile... https://www.amazon.it/gp/product/B00MBP25UK/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&amp;psc=1

Purtroppo su Amazon non è più disponibile nemmeno questa, a parte che c'è una speculazione assurda! €50 per una scheda che si e no ne costerebbe €15

Ma non è possibile usare una scheda WiFi BT direttamente nello slot della attuale Z390 Designare?

 

Ho visto che comunque il BT verrebbe usato tramite connessione USB, ma le AirPod verrebbero poi rilevate?

 

Ciao e grazie in anticipo della risposta