Jump to content

Insanely HackBeast GA Z390M GAMING - Full DSDT patches

MaLd0n

By MaLd0n,
in Installation Guides

 Share
141 posts in this topic

Recommended Posts

Toshik1978
Toshik1978
Posted
Posted

@MaLd0n I've finally updated my old i7-4790K hackintosh and looks like with new chipset/CPU I have much more issues ( Windows updated like a charm, but Hack...

Spent a day to boot system. With enabled IGFX in BIOS it's impossible at all. Always got immediate "couldn't allocate runtime area". Tried all available Memory fixes (5 different drivers) - no one works. Tried 'slide=0', tried to decrease GPU memory in BIOS... So, finally disabled GPU and could boot into the system )

So, IGFX not working at all, not all USB ports available and many-many issues. VirtualSMC doesn't work - hand on boot in different parts (battery manager, processor, etc.). FakeSMC works will (but too few sensors available).

So I'll highly grateful for your help again with new Hack.

 

Here is "send me" files.

 

Thanks an advance! 

Send me iMac.zip

Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
1 hour ago, Toshik1978 said:

@MaLd0n I've finally updated my old i7-4790K hackintosh and looks like with new chipset/CPU I have much more issues ( Windows updated like a charm, but Hack...

Spent a day to boot system. With enabled IGFX in BIOS it's impossible at all. Always got immediate "couldn't allocate runtime area". Tried all available Memory fixes (5 different drivers) - no one works. Tried 'slide=0', tried to decrease GPU memory in BIOS... So, finally disabled GPU and could boot into the system )

So, IGFX not working at all, not all USB ports available and many-many issues. VirtualSMC doesn't work - hand on boot in different parts (battery manager, processor, etc.). FakeSMC works will (but too few sensors available).

So I'll highly grateful for your help again with new Hack.

 

Here is "send me" files.

 

Thanks an advance! 

Send me iMac.zip

EFI.zip

use my full efi folder, if need enable igpu with this folder

Link to comment
Share on other sites
Toshik1978
Toshik1978
Posted
Posted (edited)
1 hour ago, MaLd0n said:

EFI.zip

use my full efi folder, if need enable igpu with this folder

 

Wow! Thanks a lot, works like a charm w/o any issues! IGFX works too (I hope...). The only changes - it looks to me, that on previous hack I saw in System Report both graphic cards. But now I saw the only one. But there is the second adapter in PCI devices...

Is it ok?

 

Just in case - updated RunMe with enabled IGFX attached

 

Screenshot 2020-01-12 at 03.19.56.png

 

Send me iMac.zip

Screenshot 2020-01-12 at 04.04.52.png

Edited by Toshik1978
Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
3 hours ago, Toshik1978 said:

 

Wow! Thanks a lot, works like a charm w/o any issues! IGFX works too (I hope...). The only changes - it looks to me, that on previous hack I saw in System Report both graphic cards. But now I saw the only one. But there is the second adapter in PCI devices...

Is it ok?

 

Just in case - updated RunMe with enabled IGFX attached

 

 

 

Send me iMac.zip

 

looks good

Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
13 minutes ago, GioiaNera said:

Hi @MaLd0n ,

i have same motherborad, 9600k + rx 580 nitro....with your clover folder in this post i get blank screen.

Patched folder is empty in your upload, this file  is not necessary?

 

Sendme file is created with your olarilla image with generic dsdt 100/200/300

Send me -iMac.zip

Arquivo Comprimido.zip

Link to comment
Share on other sites
telepati
telepati
Posted
Posted (edited)

@MaLd0n There is a problem with my RX560 I will send it to service and I am trying to boot with UHD 630 4K HDMI(Cable Ugreen HDMI 2.0 4K support) but I can't. I used framebuffer, without WEG, Inject Intel with ig-platform-id but none of them work. BIOS IGFX primary Initial display enabled. I tried almost every possible way but I cant boot its finishing verbose then loss the signal.

 

Here is my clover folder;

 

CLOVER.zip

 

Note; Cant open olarila.com its just white page.

Edited by telepati
Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
13 hours ago, telepati said:

@MaLd0n There is a problem with my RX560 I will send it to service and I am trying to boot with UHD 630 4K HDMI(Cable Ugreen HDMI 2.0 4K support) but I can't. I used framebuffer, without WEG, Inject Intel with ig-platform-id but none of them work. BIOS IGFX primary Initial display enabled. I tried almost every possible way but I cant boot its finishing verbose then loss the signal.

 

Here is my clover folder;

 

CLOVER.zip

 

Note; Cant open olarila.com its just white page.

-cdfon don't work?

 

i'm updating forum, migrate, etc ;) 

 

  • Thanks 1
Link to comment
Share on other sites
1Ale1
1Ale1
Posted
Posted

Hi @MaLd0n, I have a few questions on how do you get working nvram on Z390 motherboards

 

-Is the driver memoryallocation.efi the main responsible to get nvram working or are acpi patches/other stuff required to get the system to work?

 

-could you provide further information on how memoryallocation.efi works, who wrote it and possible access to source code?

 

-Do these fixes apply for all non-native nvram motherboards?

 

Link to comment
Share on other sites
Toshik1978
Toshik1978
Posted
Posted (edited)

@MaLd0n Looks like I have no workable sleep. Sleep works fine, but immediately wake )

  

$ log show --style syslog | grep "Wake reason"
2020-01-19 23:13:39.772310+0300  localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: XHC
2020-01-19 23:13:39.772312+0300  localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: XHC
$ pmset -g log
2020-01-19 23:13:46 +0300 DarkWake            	DarkWake from Normal Sleep [CDN] : due to XHC/ Using AC (Charge:0%) 9 secs    
2020-01-19 23:13:46 +0300 WakeDetails         	DriverReason:XHC - DriverDetails:                                          
2020-01-19 23:13:46 +0300 HibernateStats      	hibmode=0 standbydelaylow=86400 standbydelayhigh=86400
$ pmset -g
System-wide power settings:
Currently in use:
 standby              1
 Sleep On Power Button 1
 womp                 0
 halfdim              1
 hibernatefile        /var/vm/sleepimage
 proximitywake        0
 powernap             0
 autorestart          0
 networkoversleep     0
 disksleep            10
 standbydelayhigh     86400
 sleep                60 (sleep prevented by UserEventAgent, UserEventAgent, sharingd)
 hibernatemode        0
 ttyskeepawake        1
 displaysleep         60
 tcpkeepalive         1
 highstandbythreshold 50
 standbydelaylow      86400

 

I have 3 internal USB connectors. USB2 for Corsair Power Supply HX750i. USB2 for native Apple BT adapter (PCIe adapter for Apple native WiFi+BT). USB3 for https://www.silverstonetek.com/product.php?pid=695&area=en.

And I have one external USB-hub attached (Satechi USB3). I've tried to detach this one and it didn't solve issue.

 

So either one of internal connectors do wakeup. Or it's smth. other.

 

Is it possible to detect/solve such kind of issues? Tried some solutions from internet (like changing darkwake). Didn't solve issue...

 

Thanks an advance!

Edited by Toshik1978
Link to comment
Share on other sites
LiveSorcerer
LiveSorcerer
Posted
Posted

Hello, I'm having trouble finishing the update / installation of Catalina.
It starts to boot, and the installation of Catalina begins, and after the screen appears that the system will be restarted to continue the installation, it does the boot again, and when it will enter to continue the installation, a black screen appears and appears only the mouse.
Here is the configuration:
Intel - Core i9-9900K 3.6 GHz 8-Core Processor
Noctua - NH-U12A CPU Cooler
Gigabyte - Z390 M GAMING Micro ATX LGA1151 Motherboard
Corsair - Vengeance LPX 64GB (4 x 16 GB) DDR4-3200 Memory
Samsung - 970 Evo Plus 500 GB M.2-2280 Solid State Drive (Windows 10 Pro)
Samsung - 970 Evo 500 GB M.2-2280 Solid State Drive (MacOS)
Gigabyte Radeon RX VEGA 56 8 GB Video Card
GC-Titan Ridge Thunderbolt 3
Corsair - RM850x 80+ Gold Certified Fully Modular ATX Power
2x Dell UltraSharp 23.8 "U2419H Monitor

 

First Boot:

2020-01-21.thumb.jpeg.980ac114258571d2b4498011e4067ce9.jpeg

 

Second Boot:

770648575_2020-01-21(1).thumb.jpeg.206e00e0892e491fdfb019aca17a46c1.jpeg

Link to comment
Share on other sites
  • 2 weeks later...
Toshik1978
Toshik1978
Posted
Posted (edited)

@MaLd0n sorry to trouble you, but looks like I have bigger problems now.

I've just updated Mac to 10.15.3 and it's not working anymore. Restore from TimeMachine backup (with 10.15.2!!) didn't help. I have panic on boot. Removing patched ACPI didn't solve it too. Is it possible to fix it somehow? W/o possibility to boot system. Thanks!

 

PS. I can boot to Recovery! But not to the system

 

 

 

 

image0.jpeg

Edited by Toshik1978
Link to comment
Share on other sites
#McFly
#McFly
Posted
Posted

Fala @MaLd0n blz? Me fala onde acho esses patch's ou poderia me passar por favor? Claro que alguns são bem conhecidos e já tenho, mas outros não. Obrigado!
 

Quote

--DSDT Patches-- 


-FIX ERRORS AND WARNINGS
-FIX ACPI ERRORS
-REMOVE UNUSED SCOPES / DEVICES
-HIGH PRECISION EVENT TIMER
-SATA SERIE 10 ID
-DMAC
-REMOVE 22K LINES, PROBLEMATIC and UNUSED
-FIX K.P in REBOOT
-NVRAM
-REAL TIME CLOCK
-SLPB
-DARWIN / WINDOWS 2015
-XHCI
-PLUGIN TYPE
-HDAS to HDEF
-HDEF
-REAL TIME CLOCK
-ARTC
-IRQs
-SBUS
-MIKEY
-BUS1
-MCHC
-ALS0
-SHUTDOWN
-UAR1
-LAN
-FWHD
-USBX
-PMCR
-PPMC
-XSPI
-GMM
-IMEI
-EC
-PNLF
-ARPT
-GFX0
-NVME
-DTGP
-ACQUIRE MUT0 0XFFFF
-OPERATION REGION GPIO
-MUTEX MUT0 0x00
-EXTERNAL REFERENCES
-UNKNOWNOBJ
-HDMI / HDAU
-FULL RENAMED DEVICES

 

Link to comment
Share on other sites
  • 1 month later...
  • 1 month later...
XANO05
XANO05
Posted
Posted

Please help me out to make my system in hackintosh.
i have Gigabyte z390m gaming, sapphire rx590 gold edition, i7 9700, 32GB ram, 600 watt PSU.
i try to make bootable usb. but i cant. i need "EFI" file to put in my bootable usb to the installation. please help me. thanks.

Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
8 hours ago, XANO05 said:

Please help me out to make my system in hackintosh.
i have Gigabyte z390m gaming, sapphire rx590 gold edition, i7 9700, 32GB ram, 600 watt PSU.
i try to make bootable usb. but i cant. i need "EFI" file to put in my bootable usb to the installation. please help me. thanks.

update to last bios/uefi version and use my folder from first post

  • Thanks 1
Link to comment
Share on other sites
  • 2 weeks later...
MaLd0n
MaLd0n
Posted
  • Author
Posted
2 hours ago, LiveSorcerer said:

Ola @MaLd0n, qual Layout id de audio você usa nessa placa, pois aqui ele esta invertido aqui, pois o som sai no conector de microfone e o microfone na saida de audio.

Estou tentando varias configurações.

1

Link to comment
Share on other sites
LiveSorcerer
LiveSorcerer
Posted
Posted
10 hours ago, MaLd0n said:

1

Acabei de tentar e ainda continua acontecendo.

Muito estranho.

Não deve ser alguma outra configuraçao, na parte de boot args como lilubetaall e alcbeta que estao ativos ou outra configuraçao?

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...