Jump to content
About Just Joined group Read more... ×

137 posts in this topic

Recommended Posts

---USB---

https://pikeralpha.wordpress.com/2016/07/13/simple-skylake-usb-fix-no-kexts-required/

 

---CLOVER FOLDER---

https://www.olarila.com/topic/5676-clover-folder-for-all-chipsets/

 

 

--MOBO
GigaByte Z390 M Gaming

vLUqUdR.png
YE1efdP.png

--PROCESSOR
Intel Core i9-9900K

QNu6K0R.jpg

--COOLER
CoolerMaster MasterLiquid ML120R RGB

SPuPOTw.jpg

--MEMORY
Corsair Dominator Platinum 16GB (2 x 8GB)

NeLh8Vh.jpg

--GPU
Sapphiretech Radeon RX 590 8 GB GDDR5

nvggQwG.jpg

 

--SSD
Samsung 970 EVO NVMe M2 Flash Drive

jpEdeFU.jpg

--POWER SUPPLY
EVGA 750 N1, 750W

dKUhfbT.jpg

--WIRELESS
TP-Link Archer T9E

n3F7hoM.jpg

--BLUETOOTH
Orico BTA-403

G0ljPNl.jpg

--CASE
Thermaltake View 21 Tempered Glass Edition

jc1HnoK.jpg

--DSDT Patches--

-FIX ERRORS AND WARNINGS
-FIX ACPI ERRORS
-REMOVE UNUSED SCOPES / DEVICES
-HIGH PRECISION EVENT TIMER
-SATA SERIE 10 ID
-DMAC
-REMOVE 22K LINES, PROBLEMATIC and UNUSED
-FIX K.P in REBOOT
-NVRAM
-REAL TIME CLOCK
-SLPB
-DARWIN / WINDOWS 2015
-XHCI
-PLUGIN TYPE
-HDAS to HDEF
-HDEF
-REAL TIME CLOCK
-ARTC
-IRQs
-SBUS
-MIKEY
-BUS1
-MCHC
-ALS0
-SHUTDOWN
-UAR1
-LAN
-FWHD
-USBX
-PMCR
-PPMC
-XSPI
-GMM
-IMEI
-EC
-PNLF
-ARPT
-GFX0
-NVME
-DTGP
-ACQUIRE MUT0 0XFFFF
-OPERATION REGION GPIO
-MUTEX MUT0 0x00
-EXTERNAL REFERENCES
-UNKNOWNOBJ
-HDMI / HDAU
-FULL RENAMED DEVICES

 

--SCREENSHOTS--

gLIACW3.png
SG0vfPP.png
drJI1jz.png
0swQKKY.png
BgynKrh.png
t2Ybws6.png
uZYGQ4I.png
kYiGw9m.png
a8aam5e.png
xTRiTnB.png
oGwYI6W.png
HwQkfjm.png
U6i0pkW.png
bF0hDlG.png
XDjHFcd.png
xPnMDDp.png
jONJ9uk.png
GfAvPl2.png
PUoUvhU.png
wM3yVBj.png
BFLb7MN.png
I7VRS7k.png
BkM4bCu.png
e2BDcs2.png
So1UwPJ.png
dAde9y0.png
p2szExD.png
giKv4Ry.png
KuEsArh.png

--BruceX--

 

--USB-C-- test with SanDisk Ultra USB-STICK 128gb
doGHBKh.png
7jCZ16i.png

 

-Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!

Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!

We're all here to have fun and learn from each other!

Share this post


Link to post
Share on other sites
Advertisement
2 hours ago, Baio77 said:

Hi Mald0n, since January I have given myself identical configuration except that x CPU, my I7 8700 ......
I leave the OEM folder attached, now I will test yours ....

Thank's

Z390 M GAMING-CF.zip

 

u don't need emuvariable, have a fix in dsdt for it and many others

 

post one full dump, ill edit one good dsdt for u

https://olarila.com/files/Utils/RunMe.app.zip

 

 

 

Share this post


Link to post
Share on other sites

I tried using your Clover files, but machine won't boot with it. I've got the board up and running with my Clover. 

Clover 4920

i3-8100

Framebuffer configured

HS03 port is only USB2. Since only 15 ports avail, I disconnected some HS0X ports to meet the requirement. Can't get that HS03 to be USB 3 speeds though using Hackintool app. (I think I still have USBINJECTALL.KEXT in /Other. Should have taken that out.)

2 4920 (Framebuffer,USB - HS03 only usb2, i3-8100).zip

Edited by buzzworm
uploaded clover

Share this post


Link to post
Share on other sites
3 hours ago, buzzworm said:

I tried using your Clover files, but machine won't boot with it. I've got the board up and running with my Clover. 

Clover 4920

i3-8100

Framebuffer configured

HS03 port is only USB2. Since only 15 ports avail, I disconnected some HS0X ports to meet the requirement. Can't get that HS03 to be USB 3 speeds though using Hackintool app. (I think I still have USBINJECTALL.KEXT in /Other. Should have taken that out.)

2 4920 (Framebuffer,USB - HS03 only usb2, i3-8100).zip

post one full dump

--Run_Me
RunMe.app
https://www.youtube.com/watch?v=k9wmIfGLe3A

Share this post


Link to post
Share on other sites
7 hours ago, buzzworm said:

Here you go. 

Send me Z390.zip

1- Replace Full Clover Folder

CLOVER.zip

2- Install Clover again with correct options
Last Clover Version UEFI
La5CMRr.png
3- Reboot
4- Extract original tables with F4 key in Clover boot screen, files generated in Clover/acpi/origin
4- Extract new Send_me

Share this post


Link to post
Share on other sites
8 hours ago, buzzworm said:

Thanks. Here's the new one. 

Send me Z390 (v2).zip

 

I don't have the BCM94360CD wifi card installed yet. Waiting for the PCIE adapter

 

7 hours ago, buzzworm said:

FYI this is how I'm going to setup the USB ports. Using the 2 internal USB2 headers and the internal USB3 header.

Screen Shot 2019-04-25 at 8.12.02 AM.png

use it for 10.14.4 and 10.14.5

config.plist.zip

Share this post


Link to post
Share on other sites
42 minutes ago, buzzworm said:

thanks. What about that custom DSDT? I don't see that attached.

 

inside clover/acpi/patched, dsdt and ssdt6 for usb, use it with last config.plist

Share this post


Link to post
Share on other sites

I don't understand. You had me press f4 at clover boot screen. Didn't that create those Patched ACPI files? So you just provide a config.plist? Just trying to be clear about it.

Share this post


Link to post
Share on other sites
4 minutes ago, buzzworm said:

I don't understand. You had me press f4 at clover boot screen. Didn't that create those Patched ACPI files? So you just provide a config.plist? Just trying to be clear about it.

use it, only it

CLOVER.zip

 

i need tables with F4 just for check or patch a untouched table, but if u have a good renames in config.plist don't need

 

ur full DSDT i put in clover/acpi/patched

Share this post


Link to post
Share on other sites

I see your changed DSDT file, but are these the only changes you made? Is this because the config.plist is handling the renames? I'm just trying to understand it all.

 

Screen Shot 2019-04-25 at 5.30.34 PM.png

Share this post


Link to post
Share on other sites
28 minutes ago, buzzworm said:

I see your changed DSDT file, but are these the only changes you made? Is this because the config.plist is handling the renames? I'm just trying to understand it all.

 

Screen Shot 2019-04-25 at 5.30.34 PM.png

in previous folder have a full dsdt patched too ;) i just change little things in last clover folder, extract DSDT with F4 key and compare with last DSDT edited

 

renames in config.plist is mandatory to avoid conflicts in some OEM SSDT, for example, if we rename HDAS to HDEF in DSDT need rename HDAS to HDEF in SSDT OEM too, Clover rename patches solve it on the fly ;) 

Share this post


Link to post
Share on other sites
Quote

in previous folder have a full dsdt patched too ;) i just change little things in last clover folder

 

I never got a previous folder. You sent only 1 full clover.zip. The comparison was based off of the that, which is the original DSDT from pressing f4 and then your patched DSDT. The only changes I see are you changing AMI to GLORILA. That's the only change. Are you sure you sent me the right DSDT file? Feels like there should be a lot more changes based off of your list of DSDT fixes.

 

-FIX ERRORS AND WARNINGS
-FIX ACPI ERRORS
-REMOVE UNUSED SCOPES / DEVICES
-HIGH PRECISION EVENT TIMER
-SATA SERIE 10 ID
-DMAC
-REMOVE 22K LINES, PROBLEMATIC and UNUSED
-FIX K.P in REBOOT
-NVRAM / REAL TIME CLOCK
-SLPB
-DARWIN / WINDOWS 2015
-XHCI
-PLUGIN TYPE
-HDAS to HDEF
-HDEF
-REAL TIME CLOCK
-ARTC
-IRQs
-SBUS
-MIKEY
-BUS1
-MCHC
-ALS0
-SHUTDOWN
-UAR1
-LAN
-FWHD
-USBX
-PMCR
-PPMC
-XSPI
-GMM
-IMEI
-EC
-PNLF
-ARPT
-GFX0
-NVME
-DTGP
-ACQUIRE MUT0 0XFFFF
-OPERATION REGION GPIO
-MUTEX MUT0 0x00
-EXTERNAL REFERENCES
-UNKNOWNOBJ
-HDMI / HDAU
-FULL RENAMED DEVICES

 

 

Share this post


Link to post
Share on other sites
1 minute ago, buzzworm said:

 

I never got a previous folder. You sent only 1 full clover.zip. The comparison was based off of the that, which is the original DSDT from pressing f4 and then your patched DSDT. The only changes I see are you changing AMI to GLORILA. That's the only change. Are you sure you sent me the right DSDT file? Feels like there should be a lot more changes based off of your list of DSDT fixes.

 


-FIX ERRORS AND WARNINGS
-FIX ACPI ERRORS
-REMOVE UNUSED SCOPES / DEVICES
-HIGH PRECISION EVENT TIMER
-SATA SERIE 10 ID
-DMAC
-REMOVE 22K LINES, PROBLEMATIC and UNUSED
-FIX K.P in REBOOT
-NVRAM / REAL TIME CLOCK
-SLPB
-DARWIN / WINDOWS 2015
-XHCI
-PLUGIN TYPE
-HDAS to HDEF
-HDEF
-REAL TIME CLOCK
-ARTC
-IRQs
-SBUS
-MIKEY
-BUS1
-MCHC
-ALS0
-SHUTDOWN
-UAR1
-LAN
-FWHD
-USBX
-PMCR
-PPMC
-XSPI
-GMM
-IMEI
-EC
-PNLF
-ARPT
-GFX0
-NVME
-DTGP
-ACQUIRE MUT0 0XFFFF
-OPERATION REGION GPIO
-MUTEX MUT0 0x00
-EXTERNAL REFERENCES
-UNKNOWNOBJ
-HDMI / HDAU
-FULL RENAMED DEVICES

 

 

here

first folder have a full dsdt patched too 

Share this post


Link to post
Share on other sites
8 minutes ago, buzzworm said:

this is what's in that clover.zip folder from the link. nothing in ACPI. just empty folders.

 

Screen Shot 2019-04-25 at 6.43.50 PM.png

inside clover/acpi/patched

Captura de Tela 2019-04-25 às 22.52.31.png

and u see all pathes loads in Send me Z390 (v2).zip, essentials, cosmetics

Captura de Tela 2019-04-25 às 22.53.12.png

 

Share this post


Link to post
Share on other sites

I see the patches in PCI. thanks. 

USB2 ports aren't working, tho. USB3 are.

Hackintool doesn't show USB2 devices being plugged in. Only USB3.

 

Before I switched to your Clover folder, I created a 15 port patch. In my old Clover I have ACPI/patched:

SSDT-EC.aml

SSDT-UIAC.aml

SSDT-USBX.aml

 

Should I install those files back, then remove USBInjectall.kext and remove USB port limit patches?

 

 

Share this post


Link to post
Share on other sites
6 hours ago, buzzworm said:

I see the patches in PCI. thanks. 

USB2 ports aren't working, tho. USB3 are.

Hackintool doesn't show USB2 devices being plugged in. Only USB3.

 

Before I switched to your Clover folder, I created a 15 port patch. In my old Clover I have ACPI/patched:

SSDT-EC.aml

SSDT-UIAC.aml

SSDT-USBX.aml

 

Should I install those files back, then remove USBInjectall.kext and remove USB port limit patches?

 

 

use only it, usb work with this clover folder, don't need any ssdt

 

CLOVER.zip

Share this post


Link to post
Share on other sites

All USB ports are working.  So with each 10.14.x update I'll need to update the "USB port limit patch #1 10.14.x modify by DalianSky(credit ydeng)" limits?

 

Rehabman says to build custom SSDT and limit ports to 15 (using Hackintool). Thought this was the way to go if I don't want to patch with each update. Which is best?

Share this post


Link to post
Share on other sites
1 hour ago, buzzworm said:

All USB ports are working.  So with each 10.14.x update I'll need to update the "USB port limit patch #1 10.14.x modify by DalianSky(credit ydeng)" limits?

 

Rehabman says to build custom SSDT and limit ports to 15 (using Hackintool). Thought this was the way to go if I don't want to patch with each update. Which is best?

dont need custom ssdt, use with all port, no problems

 

this patch work for 10.14.5 too ;)

Share this post


Link to post
Share on other sites

  • Recently Browsing   0 members

    No registered users viewing this page.

Announcements

  • Similar Content

    • By rvilbert
      Hi all,
       
      I have been trying to install Big sur on Opencore and i believe i'm almost there but i get stuck on a grey screen with my mouse pointer just before i can see the installer screen.
      I have applied the various SSDT patches for X99. I thought that was linked to VirtualSMC which I replaced by FakeSMC but same issue. I also declared my graphic card in config.plist as i thought it could come from there but that's not the issue (Radeon RX 570).
      I have been scratching my head for some time now. Any idea from anyone please.
       
      I have attached my EFI folder and my ioreg extract. Let me know if you need anything else.
       
      Thanks a million.
       
      My config:
      Asus X99 Deluxe
      Core-i7 5960x
      Radeon RX 570
       
      @RemB
      @jmacie
      I would appreciate your help please. Any views of what could be wrong? Thanks a lot
       
      OpenCore 0.6.2 for X99 BIG SUR.zip
      X99 iMac Pro.ioreg.zip
    • By Donw35
      10152020 - Big Sur Beta 10 update, using OC .0.6.3
      09302020 - Big Sur Beta 9 update, no issues.
      09222020 - Big Sur Beta 8 update, no issues.
      09192020 - Big Sur Beta 7 update, no issues.
      09042020 - Big Sur Beta 6 update, no issues.
       
      I have moved on with this and do not use my HP G2 for Hackintosh, its mainly used for Kali Linux for Packet analysis these days, with that said I am using the HP 840 G3 for Hackintosh. I transitioned to OpenCore and Big Sur for this laptop but feel free to continue to ask questions. 
       
      My G3 has the BCM84360CS2 mod, I got the module from eBay for $10 and the adapter for $10 off amazon.
       
      Big Sur Beta 5 is working using the below EFI folder. OpenCore 6.1.0 and latest kexts
       
      Method: USB Big Sur installation
      Create an Big Sur Beta5 or Catalina USB installer (google is your friend here, plenty of tutorials there) Mount the EFI partition of your USB installer using Clover Configurator Copy the EFI file attached here. Boot your laptop using F9 and choose the USB installer and follow the prompts  
       
       
      Catalina and old method in the Spoiler
       
       
      Credits go to Jake Lo for creating this EFI file. I did make some changes to his, this one is Open Core 6.1.0 and latest Lilu.kext and WhatEverGreen.kext
      HP_840_G3_BSB5.zip
    • By AudioGod
      I have put together this simple little guide for anybody wanting to use a Patched DSDT EFI with the same configuration as me.
      This is also a thread to discuss everything Z390 Master and try and help where we can and maybe make things a little better for you. 
       
      A huge massive thank you to @glasgood @MaLd0n @larabee These three guys have helped me and talked me so much and are as helpful as you could ever get, Without them I wouldn't have a perfect working build like I do or be putting up this Guide & Discussion Thread sharing the hard work and countless hours that we have all put in to this.   
       
       
      This EFI and Patched DSDT have been created to work with a Gigabyte Aorus Z390 Master using bios revision F11L, 9900k with a 5700 XT but has also been tested and verified fully working with the following Hardware
       
      CPU's
      8600K, 8700, 8700K, 9400K, 9600K, 9700K, 9900K, 9900KS (All KF Models work but use SMBios iMacPro1,1 instead)
       
      GPU's
      RX 560, 570, 580, 590, Vega 56, Vega 64, Radion VII, RX 5500, 5500 XT, 5600, 5600 XT, 5700, 5700 XT
      (If you have success with any different CPU or GPU's then please do let me know)
       
       
       @glasgood Has kindly put together a new simple Catalina install guide so Just Follow He's Guide For a Perfect Install. (glasgood put the guide together for the Z390 Pro but the two boards are so alike that you can follow this guide with no problems at all using the Z390 Master)
       
       
      HARDWARE USED
      • Intel I9 9900k @5.2Ghz
      • Gigabyte AORUS Z390 MASTER
      • Sapphire Reference RX 5700 XT (connected to the monitor via the DisplayPort)
      • Corsair Vengeance Pro RGB 32GB @3600mhz (2 x 16GB)
      • Corsair RM850x 80 Plus Gold Power Supply Unit
      • EK Custom Liquid Cooling Loop
      • Samsung 970 EVO Plus 1TB NVMe SSD macOS Catalina 
      • Samsung 970 EVO 1TB NVMe SSD Windows 10 Pro
      • ABWB BCM94360CS2 802.11AC WI-FI With Bluetooth 4.0 PCI-Express (PCI-E)   
      • Lian Li PC-O11DW Dynamic ATX Case
       

       

       

       
      WORKING
      • Sound 
      • Ethernet Port
      • WiFi
      • SSD Trim
      • USB 3.0 & 2.0 (All ports Open Natively)
      • AirDrop
      • iCloud
      • Hardware Acceleration
      • iMessages
      • Facetime
      • Sleep & Wake
      • Sleep and Shutdown via the Power Button
      • Handoff
      • Netflix on Safari browser
      • Continuity
      • Sidecar (only works using the iMac19,1 EFI and with your igpu Enabled)

       
      EFI FOLDERS  
      please note - You must flash your Z390 MASTER bios to revision F11L or Higher to use any of these EFI's, The DSDT is not designed for any other Bios revision
      Z390AORUSMASTER.F11l.zip  - Aorus Z390 Master Bios Firmware F11L 
       
      CLOVER & OPENCORE EFIs 
      Current EFIs Updated 05/10/2020
       
       
      Clover EFI Update v5120 - 04/08/2020 - Use with Bios revision F11L or Higher Only or Replace with the older F11c/F10 DSDT if you don't want to update the bios
       
      EFI Clover VEGA Navi 030820.zip - Vega, Navi (5700, 5700XT etc), Radeon VII DSDT SMBios 19,1 EFI
      EFI Clover Polaris NVIDIA 030820.zip - RX500 Polaris Series (RX590, 580, 570 etc) SMBios 19,1 EFI
       
      Please Note - I have now set KernelPM to No as standard so if you don’t have a unlocked MSR or not using my MSR Unlocked Bios Profile then go into the Clover Config.plist and set KernelPM to Yes or you won’t be able to boot up. An even better fix would be to unlock your MSR using my profile method.
       
      Note - If your not using a 5700 XT or any other Navi GPU then remove agdpmod=pikera from the boot arguments.
       
       
      OpenCore EFI Update v0.6.2 - 05/10/2020 (Big Sur Ready)
      Myself and @texem have now created a OpenCore EFI done the way the OpenCore Devs intended it to be made, There is no DSDT in use so you can use this EFI on any supported GPU and the SSDTs have been made so they will not be used in any other Operating System apart from MacOS.
       
      OpenCore 062 Z390 Master 19,1 051020.zip - OpenCore v0.6.2, SMBios iMac19,1
      OpenCore 062 Z390 Master 1,1 051020.zip - OpenCore v0.6.2, SMBios iMacPro1,1 (IGPU Disabled)
       
      Note - If your not using a 5700 XT or any other Navi GPU then remove agdpmod=pikera from the boot arguments.
      Note 2 - Do not try to carry across your old OpenCore Config.plist to the new EFI as to many changes have occurred in 0.6.0 so please use the new Config.plist instead.
       
       
      PlistEdit Pro.zip - PlistEdit Pro (use to edit OpenCore)
       
      Using PlistEdit Pro add your details by modifying the following 

       
      PLEASE NOTE - These EFIs are setup to be used with your msr Unlocked so make sure you use the F11L Unlocked Profile but if for any reason you can not unlock MSR then just modify following in the OpenCore config.plist :
      
       
       
       
      CFG Unlock (MSR) F11L BIOS Profile - The Easy Way 
      Highly recommended if your using a Vega 56/64, Radeon VII or Navi GPU
       
       
       
      To Create Your Own Patched DSDT Message @MaLd0n using the link bellow
      https://www.olarila.com/forum/17-dsdt-patch-requests/
      (If you want a perfect setup then getting your own patched DSDT made would be the best thing to do, Mine will work perfectly fine but different hardware no matter how small a change it is can tend to have some sort of effect on the DSDT and your setup)
       
       
      If Your Not Using File Vault Then Please Disable Hibernate
      disablehibernate.command
       
       
      ADDITONAL DOWNLOADS
      Z390AORUSMASTER.F11l.zip - Aorus Z390 Master Bios Firmware F11L 
      Clover
      Clover Configurator
      Kext Updater
      RepairPermissions
       
       
      OPTIONAL DOWNLOADS
      BroadcomFix.zip   (Use these kexts if your Broadcom bluetooth/Wifi isn't working properly)
      Hackintool
      IORegistryExplorer
      Native Display Brightness with MonitorControl
       
       
      BIOS SETTINGS (Bios Revision F11L)
       
      • Enter BIOS -> Press Delete -> Enter Setup
      • Save & Exit -> Load Optimized Defaults
      • Boot -> CFG Lock -> Disabled
      • Boot -> Windows 8/10 Features -> Win 8/10 WHQL
      • Boot -> CSM Support -> Disabled (Can be set to Enabled if need be but try to have it set to Disabled first)
      • Favourites -> Extreme Memory Profile (X.M.P.) -> Profile1
      • Favourites -> VT-d -> Disabled (Can be set to Enabled or Disabled, Your choice)
      • Settings -> IO Ports -> Internal Display Output -> PCIe 1 Slot
      • Settings -> IO Ports -> Internal Graphics -> Enabled (Disabled If Using SMBios 1,1)
      • Settings -> IO Ports -> DVMT Pre-Allocated -> 64M
      • Settings -> IO Ports -> DVMT Total GFX0-Allocated -> 256M
      • Settings -> IO Ports -> Aperture Size -> 256MB
      • Settings -> IO Ports -> Wifi -> Disabled
      • Settings -> IO Ports -> Audio Controller -> Enabled
      • Settings -> IO Ports -> Above 4G Decoding -> Enabled
      • Settings -> IO Ports -> Super IO Configuration -> Serial Port -> Disabled
      • Settings -> IO Ports -> USB Configuration -> Legacy USB Support -> Auto
      • Settings -> IO Ports -> USB Configuration -> XHCI Hands-off -> Enabled
      • Settings -> Miscellaneous -> Software Guard Extensions (SGX) -> Disabled
      • Settings -> Platform Power -> Platform Power Management -> Enabled
      • Settings -> Platform Power -> ErP -> Enabled
      • Settings -> Platform Power -> RC6(Render Standby) -> Enabled
      • Save & Exit → Save & Exit Setup
       
       
      SCREENSHOTS

       

       

       

       

       

       

       

       
       
       
    • By AudioGod
      I have put together this simple little guide for anybody wanting to use a Patched DSDT EFI with the same configuration as me.
      This is also a thread to discuss everything Z390 Pro and try and help where we can and maybe make things a little better for you. 
       
      A huge massive thank you to @glasgood @MaLd0n @larabee These three guys have helped me and talked me so much and are as helpful as you could ever get, Without them I wouldn't have a perfect working build like I do or be putting up this Guide & Discussion Thread sharing the hard work and countless hours that we have all put in to this.   
       
       
      This EFI and Patched DSDT have been created to work with a Gigabyte Aorus Z390 Pro, 9900k with a Vega 56 but has also been tested and verified fully working with the following Hardware using Catalina 10.15.4
       
      CPU's
      8600K, 8700, 8700K, 9400K, 9600K, 9700K, 9900K, 9900KS (All KF Models work but use SMBios iMacPro1,1 instead)
       
      GPU's
      RX 560, 570, 580, 590, Vega 56, Vega 64, Radion VII, RX 5500, 5500 XT, 5600, 5600 XT, 5700, 5700 XT
      (If you have success with any different CPU or GPU's then please do let me know)
       
       
       @glasgood Has kindly put together a new simple Catalina install guide so Just Follow He's Guide For a Perfect Install.
       
       
      HARDWARE USED
      • Intel I9 9900k 
      • Gigabyte AORUS Z390 PRO
      • Sapphire Nitro+ SE Vega56 (connected to monitor with DisplayPort)
      • Corsair Vengeance Pro RGB 16GB @3200mhz (2 x 8GB)
      • Corsair RM850x 80 Plus Gold Power Supply Unit. 
      • CoolerMaster MASTERLIQUID ML360R RGB CPU Cooler
      • Samsung 970 EVO 1TB NVMe SSD macOS Catalina 10.15.3
      • Samsung 860 EVO 1TB SSD (2.5) Windows 10 Pro
      • ABWB BCM94360CS2 802.11AC WI-FI With Bluetooth 4.0 PCI-Express (PCI-E)   
      • Lian Li PC-O11DW Dynamic ATX Case
       

       

       

       

       
       
      WORKING
      • Sound 
      • Ethernet Port
      • WiFi
      • SSD Trim
      • USB 3.0 & 2.0 (All ports Open Natively)
      • AirDrop
      • iCloud
      • Hardware Acceleration
      • iMessages
      • Facetime
      • Sleep & Wake
      • Sleep and Shutdown via the Power Button
      • Handoff
      • Netflix on Safari browser
      • Continuity
      • Sidecar
       
       
      CLOVER & OPENCORE EFIs 
      Current EFIs Updated 05/10/2020
       
       
      Clover EFI Update - 04/08/2020 - Use with Bios revision F12d Only or Replace with the older F11 DSDT if you don't want to update the bios
       
      Clover Z390 Pro Navi Vega EFI 040820.zip - Vega, Navi (5700, 5700XT etc), Radeon VII DSDT EFI
      Clover Z390 Pro Polaris EFI 040820.zip - RX500 Polaris Series (RX590, 580, 570 etc) DSDT EFI
       
      Note - If your not using a 5700 XT or any other Navi GPU then remove agdpmod=pikera from the boot arguments.
       
      Please Note - I have now set KernelPM to No as standard so if you don’t have a unlocked MSR or not using my MSR Unlocked Bios Profile then go into the Clover Config.plist and set KernelPM to Yes or you won’t be able to boot up. An even better fix would be to unlock your MSR using my profile method.
       
      OpenCore EFI Update - 05/10/2020 (Big Sur Ready)
      Myself and @texem have now created a OpenCore EFI done the way the OpenCore Devs intended it to be made, There is no DSDT in use so you can use this EFI on any supported GPU and the SSDTs have been made so they will not be used in any other Operating System apart from MacOS.
       
       
      OpenCore 062 Z390 Pro 19,1 051020.zip  - OpenCore v0.6.2, SMBios iMac19,1
      OpenCore 062 Z390 Pro 1,1 051020.zip - OpenCore v0.6.2, SMBios iMacPro1,1 (IGPU Disabled)
       
      Note - If your not using a 5700 XT or any other Navi GPU then remove agdpmod=pikera from the boot arguments.
      Note 2 - Do not try to carry across your old OpenCore Config.plist to the new EFI as to many changes have occurred in 0.6.0. Use the new Config.plist instead.
       
      PlistEdit Pro.zip - PlistEdit Pro (use to edit OpenCore)
       
      For OpenCore Using PlistEdit Pro add your details by modifying the following 

       
      PLEASE NOTE - These EFIs are setup to be used with your msr Unlocked so make sure you use the F11c Unlocked Profile but if for any reason you can not unlock MSR then just modify following in the OpenCore config.plist :
      
       
       
       
      PLEASE NOTE - Please flash your motherboard bios to revision F12d to use my current Clover EFI. It’s a major rework of the bios and vital changes have been made to the layout and power tables. New DSDTs have been created and installed into the new EFI’s but will not work correctly with any other bios revision.
       
      Latest Gigabyte Z390 PRO BIOS (F12d)
      mb_bios_z390-aorus-pro_f12d.zip
       
       
      CFG Unlock (MSR) F12d (F12c Pro WIFI) BIOS Profile - The Easy Way 
      Highly recommended if your using a Vega 56/64, Radeon VII or Navi GPU
       
       
      DSDT's FOR CLOVER ONLY (A big thanks to @MaLd0n for compiling these DSDT's)
       
       
      To Create Your Own Patched DSDT Message @MaLd0n using the link bellow
      https://www.olarila.com/forum/17-dsdt-patch-requests/
      (If you want a perfect setup then getting your own patched DSDT made would be the best thing to do, Mine will work perfectly fine but different hardware no matter how small a change it is can tend to have some sort of effect on the DSDT and your setup)
       
       
      If Your Not Using File Vault Then Please Disable Hibernate
      disablehibernate.command
       
       
      ADDITONAL DOWNLOADS
      Clover
      Clover Configurator
      Kext Updater
       
       
      OPTIONAL DOWNLOADS
      BroadcomFix.zip   (Use these kexts if your Broadcom bluetooth/Wifi isn't working properly)
      FakeSMC    (Can be used instead of VirtualSMC)
      Hackintool
      IORegistryExplorer
      Native Display Brightness with MonitorControl
       
       
      BIOS SETTINGS (Bios Revision F12d)
      • Enter BIOS → Press F12 → Enter Setup
      • Save & Exit → Load Optimized Defaults
       
      • Boot -> Windows 8/10 Features -> Win 8/10WHQL
      • Boot -> CSM Support -> Disabled (Can be set to Enabled if need be but try to have it set to Disabled first)
      • Favourites -> Extreme Memory Profile (X.M.P.) -> Profile1
      • Favourites -> VT-d -> Disabled (Can be set to Enabled or Disabled, Your choice)
      • Settings -> IO Ports -> Internal Display Output -> PCIe 1 Slot
      • Settings -> IO Ports -> Internal Graphics -> Enabled (Set to Disabled if using SMBios iMacPro1,1)
      • Settings -> IO Ports -> DVMT Pre-Allocated -> 64M
      • Settings -> IO Ports -> DVMT Total GFX0-Allocated -> 256M
      • Settings -> IO Ports -> Aperture Size -> 256MB
      • Settings -> IO Ports -> Audio Controller -> Enabled
      • Settings -> IO Ports -> Above 4G Decoding -> Enabled
      • Settings -> IO Ports -> USB Configuration -> Legacy USB Support -> Auto
      • Settings -> IO Ports -> USB Configuration ->  XHCI Hand-off -> Enabled
      • Settings -> Miscellaneous -> Software Guard Extensions (SGX) -> Disabled
      • Settings -> Platform Power -> Platform Power Management -> Enabled
      • Settings -> Platform Power -> ErP -> Enabled
      • Settings -> Platform Power -> RC6(Render Standby) -> Enabled
       
      • Save & Exit → Save & Exit Setup 
       
       
      SCREENSHOTS

       

       

       

       

       

       

       

       

       

       

    • By ITzTravelInTime
      Hi guys, this thread is to show you a new and open source app, created by me, that I called TINU:
       
      The name means: TINU Is Not #####, the U refers to a popular software that is used to create macOS hackintosh installers (that for good reasons is banned on this forum), but the aim of the name is to explain that this app is a totally different thing from that software and works in a totally different way.
       
      This app basically is a graphical interface for the createinstallmedia executable that is inside the macOS and Mac OS X installer apps, it is capable to create a bootable installer completely vanilla like what you do using the command line method, and also this method is recommended by apple itself. In addition to this, this app provvides you simplicity and flexybility, and lets you to avoid most of the tedious steps or problems of other simlar apps.
       
      TINU allows you to create easily a bootable macOS installer without messing around with command line stuff and without using disk utility, all you need to do is use the app and then install your bootloader of choiche on the usb (or just leave it as is if you want to use it on a real Mac).
       
      Features:
      - Simple-to-use UI that allows you to easily start the bootable macOS installer creation process.
      - It can work with every macOS installer app that has the createinstallmedia executable inside its resources folder (including also beta and newly released installers).
      - You can use any erasable volume that is at least 7 GB of size (if the volume's drive is not in GUID format, TINU will re-format it accordingly).
      - Can work with the Mac OS recovery system, so you can create a bootable macOS installer from the macOS installer itself or from the macOS recovery partition, and you can use TINU to install macOS, too.
      - 100% clean: The bootable macOS installers created with this tool are vanilla, just as if you created them using the command line "createinstallmedia" method in Terminal.
      - Open Source: You can verify what this program does on your computer and you can create your own version by downloading and playing with the source code.
      - Does not require any special preparations. Just open the program, make sure you have a USB drive plugged in and have a macOS installer app on your disk.
      - No need to use Disk Utility. TINU can format your drive or partition for you.
      - Integrated EFI partition mounter tool.
      - Works using the latest versions of macOS and will also support newer Mac installers out of the box without requiring an update.
      - Offers advanced features to customize your bootable macOS installer.
       
       (To sugegst a new feature please contact me on github)
       
      Requirements:
      - A computer that runs Mac OS X Yosemite or a more recent version (Mac OS X El Capitan is required to use TINU in a macOS recovery or installer).
      - A drive or a free partition (on a drive which already supports GUID) of least 7 GB that you want to turn into a macOS/Mac OS X installer.
      - A copy of a macOS/Mac OS X installer app (Maveriks or newer versions are supported) in the /Applications folder or in the root of any storage drive on your machine (excepted the drive or volume you want to turn into your macOS install media).
       
      Download:
      - All downloads:
      https://github.com/ITzTravelInTime/TINU/releases
      - Reccommended download for Catalina and Big Sur users:
      https://github.com/ITzTravelInTime/TINU/releases/tag/3.0_BETA_4_(82)

      Frequently asked questions:
      https://github.com/ITzTravelInTime/TINU/wiki/FAQs
       
      Useful links:
      Thread (english) on insanelymac.com:
      - http://www.insanelymac.com/forum/topic/326959-tinu-the-macos-installer-creator-app-mac-app/
      Thread (italian) on insanelymac.com:
      - https://www.insanelymac.com/forum/topic/333261-tinu-app-per-creare-chiavette-di-installazione-di-macos-thread-in-italiano/
      Thread (english-german) on hackintosh-forum.de:
      - https://www.hackintosh-forum.de/index.php/Thread/33630-TINU/
      Post on Reddit:
      - https://www.reddit.com/r/hackintosh/comments/a1h61d/tinu_vanilla_bootable_macos_installer_creation/
      Facebook hackintosh help and beta testing (Italian only):
      - https://www.facebook.com/groups/Italia.hackintosh/?fref=ts
      Contact me (project creator):
      - Insanelymac.com profile: http://www.insanelymac.com/forum/user/1390153-itztravelintime/
      - email: piecaruso97@gmail.com
       
      Note that:
      - This software is under GNU GPL v3 license so any new branch/mod/third party release must be open source and under the same license.
      - We (the project creator and othe people involved with active developmment) assume no responsibility for any use of this app and this source code, and also for any kind of hardware and software damage to any computer and any device or peripheral that may come from this app or source code during it's use and outside it's usage
      - We do not guarantee support to you, this is only an open source project, not a product released by a company!
      - This project is born only for educational and demonstrative purposes, it's not intended to be used for commercial purposes and it will never be.
      - This is a no-profit project, born only to let people to create macOS install medias in a more simple way and also to learn how to create this kind of apps.
       
      Credits:
      - Apple for macos and installer apps and scripts
      - People that helped me a lot:
      Francesco Perchiazzi, Nicola Tomarelli, Roberto Sciortino, Raffaele Sonnessa, Ermanno Nicoletti, Tommaso Dimatore, Michele Vitiello Bonaventura, Massimiliano Faralli, Davide Dessì, Giorgio Dall'Aglio, Peter Paul Chato.   
      - Special thanks to Italian Hackintosh group!! for help (https://www.facebook.com/groups/Italia.hackintosh/?fref=ts)
      - Thomas Tempelmann for help with the UI
      - Pietro Caruso (ITzTravelInTime) for creating, maintaing and developing this project
       
      Here are also some screenshots inside this spoiler tab
       
       
       
         
×