Jump to content

Search the Community: Showing results for tags 'tutorial'.



More search options

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Content Type


Forums

  • InsanelyMac Lounge
    • Front Page News and Rumors
    • Reader News and Reviews
    • Forum Information and Feedback
  • OSx86 Project
    • New Releases and Updates
    • New Users Lounge
    • Developers Corner
    • Tutorials (The Genius Bar)
    • Technical FAQ
    • Installation
    • Post-Installation
    • DSDT and SSDT
    • Hardware Components and Drivers
    • Desktops
    • Notebooks
    • Netbooks
    • Tablets
    • MacMod of the Month
    • Multi-booting and Virtualisation
  • International
    • Your Language
    • Deutsch
    • Español
    • Français
    • Italiano
    • Português
    • Русский
  • Apple World
    • Mac OS X
    • Apple Computers and Hardware
    • iOS Devices
    • Mac Applications
    • Mac Programming and Development
    • iOS Programming and Development
    • Mac Gaming
    • Mac Accessories
  • Discuss and Learn
    • Windows Discussion
    • *nix
    • Apple Opinions and Discussion
    • The Great Debates
    • Internet(s), Servers, and Networks
    • Buying Thoughts, Reviews, and Recommendations
    • Mods and Overclocking
    • The Big Issues [Real Life]
  • Everything Else
    • Creativity
    • Thunderdome (Random Stuff)
    • Laughs
    • The Marketplace

Categories

  • Kexts
    • Graphics Cards
    • Audio
    • LAN and Wireless
    • Other
  • Kernels
  • Bootloaders
  • DSDTs
    • Patches
  • Pandora
  • Apps
  • Miscellaneous
  • Customization

Find results in...

Find results that contain...


Date Created

  • Start

    End


Last Updated

  • Start

    End


Filter by number of...

Joined

  • Start

    End


Group


MSN


Website URL


ICQ


Yahoo


Jabber


Skype


Location


Interests

Found 21 results

  1. ---INSTALLATION TUTORIAL--- ---Original Post--- https://olarila.com/forum/viewtopic.php?f=45&t=9172 ---USB--- https://pikeralpha.wordpress.com/2016/07/13/simple-skylake-usb-fix-no-kexts-required/ ---CLOVER FOLDER--- CLOVER.zip --MOBO GigaByte Z390 M Gaming --PROCESSOR Intel Core i9-9900K --COOLER CoolerMaster MasterLiquid ML120R RGB --MEMORY Corsair Dominator Platinum 16GB (2 x 8GB) --GPU Sapphiretech Radeon RX 590 8 GB GDDR5 --SSD Samsung 970 EVO NVMe M2 Flash Drive --POWER SUPPLY EVGA 750 N1, 750W --WIRELESS TP-Link Archer T9E --BLUETOOTH Orico BTA-403 --CASE Thermaltake View 21 Tempered Glass Edition --DSDT Patches-- -FIX ERRORS AND WARNINGS -FIX ACPI ERRORS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA SERIE 10 ID -DMAC -REMOVE 22K LINES, PROBLEMATIC and UNUSED -FIX K.P in REBOOT -NVRAM / REAL TIME CLOCK -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -MIKEY -BUS1 -MCHC -ALS0 -SHUTDOWN -UAR1 -LAN -FWHD -USBX -PMCR -PPMC -XSPI -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -OPERATION REGION GPIO -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES --SCREENSHOTS-- --BruceX-- --USB-C-- test with SanDisk Ultra USB-STICK 128gb -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders! Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others! We're all here to have fun and learn from each other!
  2. Hello InsanelyMac forumers, Im CrackerzWave here. Recently I just bought a laptop which is Lenovo Ideapad Y400 , below is the spec Windows 8.1 Intel® Core™ i7-3630QM (2.4GHz up to 3.4GHz, 6MB L3 Cache) RAM:4 (1x4096) 500G HDD Nvidia GT750M 2GB DDR5 14" HD WLED Webcam:HD DVD-SM:Yes Bluetoooth 4.0 VGA:Yes LAN:Yes HDMI:Yes Speakers:SRS + JBL Card-reader:Yes USB:2 x 2.0; 1x 3.0 Battery: 6 Cells Wifi card is Atheros AR9485 Many people said Hackintosh is hard to install at notebook because of Optimus. Althought this laptop have Intel and nvida gpu but it doesnt support optimus. 100% running Nvidia GPU GT750M How to dual boot Mavericks with Windows 8.1 GPT UEFI? I already have mavericks dmg and make the usb with [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] (does [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] ok) How to make dual boot? How many partitions? Recommended Capasity? Thx
  3. Hello everybody! Now I have a problerm to install MacOSX on me netbook, becouse i can't find a tutorial or something that tell to me how to do it. Please maybe someone help me with it. Sorry for my english. My configuration is: HP G62-b14er CPU --- AMD Phenom II N830 Video --- ATI Mobility Radeon hd 4250 ATI Mobility Radeon hd 5470 Sound --- Realtek ALC270 Ralink RT3090 802.11b/g/n WiFi Adapter It seems to be all you need to have.
  4. In questa guida vi spieghero come risolvere il "Missing bluetooth controller" e/o "Boot0 done" su ati 7xxx. Missing Bluetooth Controller: Per chi non avesse già installato una versione di OS X, può creare il proprio "installer" da windows seguendo questa guida; Al termine dell'installazione eseguiamo il boot da clover con le seguenti "flag": -x -v Configuriamo l'account utente e, una volta giunti alla scrivania, riavviamo; Dopo il riavvio eseguiamo il boot con: -s Successivamente digitiamo in sequenza: mount -uw / cd /System/Library/Extensions mkdir intel_back mv AppleIntelHD* AppleIntelF* intel_back/ touch ../Extensions reboot Una volta riavviato il sistema installeremo tutti i kext necessari. Boot0 done con Chameleon: Scarichiamo l'ultima versione di chameleon che possiamo trovare nell'area download ed installiamola; Scarichiamo MyHack (Cerca con google); Estraiamolo ed avviamolo; Selezioniamo "Installazione Chameleon"; Riavviamo. Good Hackintosh Ringrazio @carbo178 e @friscos
  5. ***Pode ser que o tutorial sirva em outros notebooks da série 5750, por isso antes de tentar o tutorial tente comparar os modelos da série, muitas vezes a numeração muda mas as diferenças são poucas, como quantidade de memória, core i5 e não i3, etc...*** Especificações do Notebook (Caso queira tentar com outro modelo próximo): Intel® Core™ i3-2310M 15.6 HD Acer CineCrystal Mobile Intel® HM65 Express Chipset Acer Crystal Eye HD (WebCam) Touchpad Elantech BCM57785 Ethernet BCM57765 (Leitor de cartão) Atheros Wi-Fi AR9287 Intel Graphics HD3000 Primeiramente siga um dos tutoriais abaixo de instalação do OS X 10.8, removendo as kexts de vídeo com o Transmac (Faça isso antes de tudo, pelo Windows), deixando somente as Kexts de vídeo Intel: Via USB: viewtopic.php?f=26&t=1618 Via DVD DL: viewtopic.php?f=26&t=1586 Durante a instalação pode ocorrer da tela ficar branca, não mexa, espere o OS X reiniciar, a instalação ocorrerá com sucesso. Após seguir o tutorial escolhido, vem a parte de configurar o seu Acer. Se já tinha o Windows instalado é bem provável que tenha o erro boot0 após instalar o Chamaleon então siga estes passos: viewtopic.php?f=8&t=1198 Agora é só instalar os apps e kexts contidos no pack: http://www.mediafire.com/?d9umkalmhhmuplm O que funciona: Áudio (Kext no pack) Brilho (Após a inserção da DSDT contida no pack, para ajuste rápido pelo menu bar utilize o app contido no pack) Ethernet (Funciona, mas não utilizo então é só dar uma procurada rápida pela internet pra achar essa Kext) Wi-FI (Kext incluso no pack) Webcam (Funciona por padrão após a instalação) Sleep (Kext universal contida no pack) Indicador de bateria (Contido no pack) Teclado ABNT2 (.bundle contido no pack com instruções, teclas de atalhos para brilho não funcionam, as de áudio funcionam) Trackpad (Funciona apenas o básico, multitouch e scroll não funcionam) USB 2.0 HDMI Saída P2 (Testei a de áudio) O que não funciona ou não funciona bem: Microfone embutido Scroll e multitouch do teclado USB 3.0 Fn Multimedia DVD (Leitura de DVDs de vídeos com problema, quem souber a solução por favor poste!) Coloquei alguns aplicativos úteis no pack para: Ajuste de brilho pela barra de menus, não dormir ao fechar a bandeja, leitura e gravação em drivers NTFS, monitor de temperatura na barra de menu, System Info pra verificar no futuro a inclusão/solução de novas kexts, driver para controle de XBox 360. A instalação desses itens é opcional. Todos os créditos aos desenvolvedores das Kexts e criadores dos tópicos de tutorial do fórum http://olarila.com/. Qualquer dica, dúvida ou sugestão só falar! Espero que ajude! Copie a URL do anexo e cole na página para visualizar o .tiff que mostra a configuração do Chamaleon para este Notebook. Sem TÃ tulo.tiff
  6. IMPORTANT: CAUSED BY NEW APPLE VERIFICATION-STEPS, you need MLB (BoardSerialNumber) and ROM from a real Mac. The use of real mac MLB/ROM is a temporary solution. I always prefer to use generated IDs, but actually there is no way around. Note: This guide is for Clover users only. Please do not ask questions related to Chameleon or other Bootloaders. Please follow all steps, or at least read them all. You will probably need to call the Apple support to activate iMessage, but don’t worry, I will explain you what you need to do. Also try to change your IDs as less as possible, this is also why I advise you to disconnect temporary from internet after step 3. Never share your ID's and never believe or use ID's found on the internet! Requirements: Clover MLB & ROM from real Mac Clover Configurator ( http://www.hackintoshosx.com/files/file/49-clover-configurator/ ) iMessageDebug ( http://www.insanelymac.com/forum/files/file/278-imessage-debug/ ) 1 Step You need to mount you EFI partition, to do so, type following command in terminal (Applications>Utilities>Terminal) diskutil list The output should look like this: Look for your System HardDrive or SSD (in my case HackintoshSSD 10) and copy your EFI partition IDENTIFIER (in my case disk1s1) Now type following command: diskutil mount YOUR_IDENTIFIER in my case this would be: diskutil mount disk1s1 Now you should see EFI Drive in Finder. 2 Step Open the Clover Configurator Application, you should see following screen: Select following config file: EFI > EFI > CLOVER > config.plist (Highlighted in blue). Now move to the SMBIOS Section (left menu). Click on the magic wand icon and select appropriate bios for your system. If you are not sure which one, check your About this Mac>System Reports and check your Model Identifier (in this example iMac (13,2) ). Click several times on the little shake buttons to generate a Unique Serial for you Hackintosh. (Note: This is only an example, don’t use the serials shown in the image!) Now you need to check, if your Serial is a generic one and not from a real mac. To do this: go to https://selfsolve.apple.com and enter you generated serial. If you don’t get an error Message, just randomise the serial again with the 2 little shake buttons. Repeat this until you get an error message on the site. Click on “OK” to save you SMBIOS. 3 Step You should now have a screen similar to this one. Now you need to populate those 2 RED indicated fields. Open again Terminal and enter: uuidgen This will output something like this: C5FAA18D-AA58-44E4-ABBF-C31885429CD7 Repeat this 3-4 times to be sure to get an unique one. Copy it and paste it into SmUUID. The second file that needs to be populated, is the board ID. For this, just copy your Serial and Enter some random letters and numbers, that you get a length of 17 digits! In my example this would be: C02LHIA7DNMP7E8G4 4 Step Go to the RT Variables Section, enter the MLB (BoardSerialNumber) & ROM value from a real mac and click Calculate. Do not use values found on the Internet! Only use values from your own mac and never ever share them! To learn more about MLB check out this Thread by holyfield. To find those Values on a real mac, simply run iMessage Debug or for older macs (OS X Lion / Snow Leopard) check out here (by Fusion71au). The real mac does not need the be the same model as your SmBios, you can use the ROM/MLB form a MacBookPro with MacPro SmBios on you hack. You can also still use both Macs on the same times on iMessage. Go System Parameters Section on Clover Configurator and make sure, that those are empty! Now save the file (cmd + s). Disconnect your computer form Internet and Reboot. Do this several times and always check with iMessageDebug (double click on the file), that all IDs are set and stay the same. If it is so, you can reconnect to your network. If not, retry steps 1-4. You will now be prompted to re-login to iCloud and iMessage. Normally you should not get any error or code from iMessage if you use a valid ROM/MLB combination. If you get an Code and you are asked to call apple, you are using some invalid ID combination, usually related by ROM/MLB. I would not recommend you to call Apple, as you are not using a mac, even if some other tutorials tell you that. Enjoy fully functional iMessage! Hope it helped
  7. Update 3 audio fix http://www.mediafire.com/?co2ie1cxas7827o remove applehda before installing package Update 2 File upload for starters while I have a moment, I will add a noob friendly tutorial when I have more time, thanks for the patience This package is for the 771 I will upload the 571 soon http://www.mediafire...xkwfj6vpdp6zchj Update 1 I'm trying to get all the packages together to upload, this is the method of Install that I used, get a hold of this and unless you have a working mac, transmac will be needed to modify a few files, I used transmac. Prior to doing this the hard drive is a 4k sector drive so I will add the boot1h file you will need to put on the root of the installer to copy over to make boot work after install. Lastly I will be creating a restore for people who don't want to put in the effort, when it's completed for both laptops ill let everyone know and you can pm me for the link. Sorry for the delays been busy, just finished getting my wife's Acer v3 571 up and running perfectly as well, I will update you all here, both packages and guides on what I have done. Thanks J Hello everyone, after lots of work, I have got this laptop under wraps, everything working 100% I am going to upload all the files i used and modified and the dsdt i have created in case anyone else needs help. I will edit this and add the tutorial here asap thanks, J
  8. Olá! Bom pessoal, eu trabalho com programação, possuo um Notebook Dell Inspiron 14" modelo 2640. Segue as configurações dele: i5-3337U 1,80Ghzx4 (UpTo 2.7Ghz Turbo Boost) 6GB ram DDR3/1666Mhz 8X CD/DVD Burner (Dual Layer DVD+/-R Drive) Dell Wireless 1703 802.11b/g/n (2.4Ghz )10/100 Ethernet Vídeo: Integrado: Inter® HD Graphics 4000 NVIDIA GeForce GT625M - 1GB Ok, eu tentei anteriormente instalar o Mac OS X Lion no meu Desktop, mas sem sucesso. Tentei instalar o iAtkos L2 no meu DualCore 3.4Ghz E6700 mas não consegui e ninguém ajudou... Então resolvi tentar com o meu Notebook, mas o problema é que eu trabalho todos os dias nele, não posso passar muito tempo sem ele... Então eu preciso de ajuda com isso, e outra... ele teve um problema recentemente, e um DVD quebrou dentro do driver, então estou sem o driver de DVD, ou seja, só poderei fazer isso via pendriver USB. Então se alguém puder me ajudar a instalar o windows 8 em dualboot com o Mac OS X (a versão que vocês recomendarem), eu ficarei grato... Lembrando que minha placa é UEFI. -------- EDIT -------- Pessoal, resolvi postar as configurações do meu desktop, pra saber se realmente não teria uma forma de instalar nele... Intel Graphics G41 4GB RAM/DDR3 1333 DualCore 3.4 E6700 HD SATA II 500GB Placa Mãe IPM41-D3
  9. Ciao, this tutorial is written after months of failed installations (at least 20) and testing which probably wrecked my laptop by now. The following applies for the Acer Aspire 4750g, a notebook which is really a pain in the ass. However, if other notebooks also have an Intel Core i7 (with sandy bridge Intel HD 3000 integrated graphics) or an Nvidia GT 540M (this card is NOT supported, but detected by Lion), one can also follow some points from this guide to achieve full QE/CI. Of course, credit goes out to tonymac, netkas, etc. who have come up with great utilities and kexts, as well as the Chinese language Acer forums which I ripped the kexts from. Hope that others with the same pain-in-the-ass laptop can stop worrying now. http://yfrog.com/odzygepj Here are the specifications of this model and what is working and what is not: CPU and chipset - Intel® Core™ i7-2630QM - WORKING without DSDT needed, integrated Intel HD 3000 FULLY WORKING Display - 14" HD 1366 x 768 - WORKING at full resolution Graphics - NVIDIA® GeForce® GT 540M with NVIDIA® Optimus™ technology - NOT SUPPORTED as mentioned above, but integrated graphics WORKING. Disable NVIDIA card in BIOS if possible Audio - no idea - WORKING Webcam - NOT WORKING Wireless - Atheros AR9287 - NOT WORKING for me (BUT other forums reports working with kext+fix, haven't tried fix) Keyboard and touchpad - WORKING USB - Not all ports work, USB 3.0 SHOULD WORK with kext And here is what you need: 8GB USB drive or larger Lion installer dmg (from Mac App Store) or Lion installer thumbdrive (from Apple) [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] (as of this tutorial v4.2) Chimera (as of this tutorial v1.7) Bag of kexts - links are below! [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] 1. Download [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] and follow its instructions to create an installer thumbdrive - http://tonymacx86.blogspot.com/2011/10/[url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]-install-mac-os-x-lion-using.html 2. Copy the following packages onto the thumbdrive (in an empty folder) - Chimera (bootloader) VoodooHDA 0.2.7.3 (to enable sound) Your favourite kext installer OR [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] (in place of the three options above) IOUSBFamily.kext and IOUSBMassStorage.kext (to enable USB) - http://www.osx86.net/view/2065-iousbfamily.kext_for_non_working_usb-s..html Networking kexts (optional, might not work) VoodooBattery.kext (optional) TIP! - If you need to install it on an MBR partition, use the patcher - http://3rr0rists.net/driver/mbr-patch-for-lion-gm.html ([url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] cannot install to MBR, only GUID which didn't work for me due to bootloader reasons) 3. Install Lion (simple, not a lot of options) - Partition with GUID unless patched, I suggest patching and using MBR. 4. Reboot and boot new installation using [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] thumbdrive, in single-user mode (-v -s) 5. Mount the root partition in read-write mode (instructions in terminal) 6. 'cd' to /System/Library/CoreServices/"Setup Assistant.app"/Contents, edit Info.plist and delete the lines with keyboard selection and device selection (sudo pico, or copy over with a patched Info.plist floating somewhere from the internet) 7. Exit and finish setup assistant. 8. Copy the folder full of kexts from the [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] thumbdrive to the desktop. 9. Run Chimera pkg and VoodooHDA pkg OR 10. Run [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url], selecting Chimera and VoodooHDA ONLY. 11. Reboot (although you would most likely get kernel panic) using [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] thumbdrive back into new installation. 12. Using the terminal, copy the following files: sudo -s mkdir /Extra/Extensions cp -rf /Volumes/([url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url])/Extra/Extensions /Extra cp /Volumes/([url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url])/Extra/org.chameleon.Boot.plist /Extra cp /Volumes/([url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url])/Extra/smbios.plist /Extra 13. Go to /Extra/Extensions, and delete IOUSBFamily.kext and IOUSBMassStorage.kext 14. Copy the proper IOUSBFamily.kext and IOUSBMassStorage.kext which you downloaded to /Extra/Extensions 15. Run the following in Terminal sudo chmod -R 755 /extra/extensions/IOUSBFamily.kext sudo chown -R root:wheel /extra/extensions/IOUSBFamily.kext 16. Run Kext Utility OR fix permissions, rebuild cache with your favourite utility. Install VoodooBattery (optional) 17. Reboot without [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] thumbdrive in verbose mode. That's it! If network is desired, kexts (http://www.osx86.net/downloads.php?do=file&id=1626) and link for fix (http://bbs.pcbeta.com/viewthread-882193-1-1.html second post) is here. Any file one requires, I can upload upon request! This is my first Hackintosh guide, so please forgive and point out mistakes. Grazie..
  10. Informações deste Notebook: i5-3210M | 4GB 1600MHz | HD 4000 | Audio - Cx20590 | Wifi - AR9285 | Network - Atheros AR8162 - BIOS: Insyde H2O - 3.7 Clover UEFI Esse tutorial é para instalar o Clover em UEFI no Lenovo G480. 1 - Para instalar os sistemas operacionais no modo UEFI, seu BIOS precisa ter a opção UEFI Boot e ela precisa ser ativada. 2 - Observe que quando essa opção está ativa, aparece UEFI/EFI antes do nome do drive. Formate um pen drive como FAT32 e instale o Clover nele. Para esse Notebook você precisa ter pelo menos esse drivers na pasta /EFI/CLOVER/drivers64UEFI. Depois de instalar, crie a pasta EFI/BOOT no pen drive e copie o arquivo EFI/CLOVER/CLOVERX64.efi para EFI/BOOT/BOOTX64.efi Inicie o sistema pelo pen drive para testar o boot UEFI. Se deu tudo certo, e o sistema está redondo com tudo funcionando, é hora de instalar o Clover em EFI. Para isso a EFI tem que ser formatada em FAT32. O "x” é o numero da sua partição EFI. Vamos usar o Terminal: diskutil list sudo newfs_msdos -v EFI -F 32 /dev/diskXs1 Agora vamos montar a EFI: mkdir /Volumes/EFI sudo mount_msdos /dev/diskXs1 /Volumes/EFI Crie a pasta EFI na partição EFI. Copie a pasta EFI/Clover do pen drive para a pasta EFI da partição EFI. Reinicie com o pen drive inserido. Use o Pen como boot, agora no menu do Clover entre na opção Clover Boot Options e selecione Add as UEFI boot option. Essa opção só ira aparecer se o modo UEFI estiver ativado A partir de agora você conseguirá iniciar sem o pen drive, pelo Clover da partição EFI, no modo UEFI. Um adendo, quando estiver com tudo preparado, exclua os outros drivers das pastas drivers32UEFI, drivers32 e drivers64.
  11. hah, niiiiceee will try this sometime thanks
  12. supergaia

    creare un icloud valido

    ciao ho guardato come create un icloud account valido su utube , non è cosa semplice ,almeno il video era veramente lungo posso fare due domande 1) l'account di icloud mi serve per app store , iMessage e facetime vero ? serve per tutti e tre vero? apple store senza un account icloud non scarica nulla vero? 2) c'e' una guida ben fatta su questo forum e soprattutto posso lavorare con clover configurator senza montare la uefi ,cioè senza usare clover configurator per canbiare il file config, ed editare in file config con un file notepad aggiungendo quello che serve? grazie
  13. I made a Video guide for the easiest and fastest installation available right now. Using a PKG for creating the USB installation drive and [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] for yosemite for post-install procedures. Special guest: Doggee My specs: Asus P9X79 Pro Motherboard Intel 3930k i7 processor MSI GTX 770 16GB RAM Complete success and stable system since Lion 10.7
  14. Run macOS Sierra on a Dell Latitude E6320 NO ONE IN THIS FORUM (INCLUDING ME) IS RESPONSIBLE FOR ANY LOSS (DATA, MATERIAL, EQUIPMENT…) OCCURRED TO YOU, YOU ARE THE ONLY ONE RESPONSIBLE, AND BY FOLLOWING THESE INSTRUCTIONS YOU AGREE TO TAKE ALL THE RISKS AND RESPONSIBILITIES. THIS INSTALLATION ISN'T WITHOUT RISKS SO TAKE ALL THE PRECAUTIONS BEFORE DOING ANY FOOLISH ACTION, BACKUP YOUR DATA! This tutorial will describe the steps to install macOS Sierra on a Dell Latitude E6320 i5 2520M. If you find any mistakes or have something to improve then please send me a PM and i will update the tutorial. A special thanks goes to Brian from Tech Erra, 9 to 5 Mac and Morpheousman for using parts of their tutorial I am from The Netherlands so sorry for my bad English. 1. Credits/Sources Everything OSx86-related is a collaborative effort amongst people who enjoy doing these things, as well as those of us who enjoy tweaking and experimenting with things. Below are a list of sources used to compile this guide: OSX Latitude.com Tech Erra OSX86 Wiki InsanelyMac Forum member Jake Lo from OSXLatitude.com for helping me out with installing. Morpheousman and Polyzargon from InsanelyMac who helping me with my other topics. (Dell 780) MacPeet, Chris1111 and all other forum members who helping out the community. A special thanks goes to Brian from Tech Erra, 9 to 5 Mac and Morpheousman for using parts of their tutorial. And Hervé from insanelymac for using is modified DSDT.aml for E6320 2. Requirements Here are the requirements: A Dell Latitude E6320 – This is necessary to install macOS Sierra for this tutorial A copy of Mac OS X – This can be in the form of an existing hackintosh, a virtual machine within Windows or Linux, or even a regular Mac. If you don’t have any of these things, then find someone who can help you out for a while. I prefer using a hackintosh with OSX El Capitan, Using an already working copy of Mac OS X either in a VM or a native hackintosh install is HIGHLY recommended. A 8GB USB flash drive (or larger) – We’ll be copying the files to the drive appropriately, so make sure that you have a flash drive with enough storage space (8GB or larger). A copy of macOS Sierra – The method used by this guide requires that you have a copy of the macOS Sierra Installation app, wich is available for free from the Mac App Store. 30-60 minutes of time – Depending on how tech-savvy you are, this may be quick, or it may take a while. An SSD or HDD to install 10.12 to – For me, I used a 500GB HDD to install 10.12 to. An Wireless N Nano USB Adaptor – For use with wifi Highly recommended. I use a TP-LINK TL-WN725N adaptor. E6320_V2.zip – This ZIP file contains everything that you need to get your flash drive properly prepared. 3. My Specs My installation was successfully done on an Dell Latitude E6320 i5-2520M laptop computer with the following specs. Intel Core i5-2520M @ 2.5GHz, 3MB cache, Dual Core 4GB DDR3 1333Mhz RAM Western Digital 250GB HDD INTEL HD3000 Video Intel 825xx onboard network Dell wireless 375 Bluetooth 3.0 onboard (works OOB) IDT 92HDxxx HD audio onboard TL-WN725N Wireless N Nano USB Adaptor Apple Magic Trackpad (only @home) Apple Wireless Keyboard US (only @home) Apple Magic Mouse 4. Download OS X Sierra Download macOS Sierra from the Mac App Store. Once macOS Sierra is downloaded, close the install pop-up that appears using Command (⌘)+Q. The application INSTALL macOS Sierra will appear in /Applications Done! 5. Prepare bootable USB Installer Note on flash drives: You will need a USB flash drive to make this work. Your USB should be at least 8GB and a USB 3.0 drive is preferred. Kingston sells an 8GB USB 3.0 drive for less than 10 euro. Now, we need to prepare the USB Drive so that it will properly bootup on your PC. Make sure that the disk you choose to use doesn't contain anything that you want to keep, because the following tutorial will purge everything on the drive. Open Finder - Applications and right-click on Install macOS Sierra and select Show Package Contents. Open Contents - Resources. Open a Terminal window thru Applications - Utilities - Terminal. In the Terminal window type sudo followed by a space. Drag the createinstallmedia file from the finder window opened in Step 4 to the Terminal Window. Type --volume followed by a space. Connect your USB drive and drag the USB drive into the Terminal Window. Type --applicationpath in the Terminal followed by a space. Open Finder - Applications and drag the Install macOS Sierra into the Terminal Window. Press Return on the keyboard to submit the full command. Type a 'Y' to continue when prompted to do so, and press Return on your keyboard The install process will begin by erasing the contents of your USB disk and copying the installer files to the USB disk. The entire process is quite lengthy; it can takes around 15-30 minutes, so you will need to show some patience 6. Installing Clover to the USB Disk Unpack the E6320.zip to your desktop or specified map you preferred. Open the map E6320 - Clover_v2.3k_r3726. DubbleClick on the Clover_v2.3k_r3726.pkg package file. Clover installation screen will be prompt. Click on Continue - Continue. Click on Change Install Location on the right bottom. Choose your USB Stick named Install macOS Sierra Public Beta click on Continue. Click on Customize on the left bottom. Choose Install Clover in the ESP Choose Bootloader : Install boot0af in MBR Choose in Clover EFI for CloverEFI 64- Bits SATA At last choose Install RC Scripts on target volume Click after that on Install. Clover will installed on the EFI Partition on the USB after install you can see the EFI partition in Finder. 7. Prepare USB stick for the Dell E6320 Now, we need to prepare the USB Drive so that it will properly bootup on your Laptop. Go to map where you have unpacked the E6320 zip file there you will find a map called EFI. Copy the map EFI and go to your EFI partition thru Finder. Paste the EFI folder in the EFI partition and replace everything. Done your USB Stick is ready to boot macOS Sierra installer. 8. Bios Settings Dell Latitude E6320 Before we boot from the Dell Latitude we need to optimize the bios for OSX Sierra Start your Dell Latitude and press F2 to get into the Bios. In the main screen click on "Load Defaults", the bios will be reset to default settings. Go to General - Boot Sequence and choose on the right for USB Device and click the up arrow so that the USB Device is on top, click on apply to make the setting. Go then to System Configuration - SATA Operation and choose on the right for AHCI click again on apply and choose exit, now the Bios is ready for installing OSX Sierra. 9. Installing OSX Sierra from your USB drive Time for the fun stuff! We’ll now boot from your USB drive and install macOS Sierra onto the Hard Drive. Using a USB 4G flash drive will help things out quite a bit. Power on unit while tapping F12 Key to choose boot device, select USB device. When Clover boot screen is visible, choose boot "Install macOS from Sierra USB Installer". Choose you desired language and click on the arrow, the macOS Utilities screen will appear. For a new installation of macOS, you must erase and format the destination drive according to the following steps before continuing. If you are upgrading from Mavericks , Yosemite or El Capitan and you want to keep your files and apps, skip steps 1-9. (NOT TESTED IN SIERRA) Choose in the macOS utilities for Disk Utility and click Continue. Disk Utility will be opened, highlight your target drive for macOS Sierra installation in the left column. Click ERASE button on top. Under Name: Type Sierra or any other name. Under Format: Choose Mac OS Extended (Journaled). Under Scheme: Choose GUID Partition Map. Click Erase. Click on Done. Close Disk Utility you will be prompted to the macOS Utilities screen. In the macOS Utilities screen choose Install macOS and click 2x on Continue. Agree the license agreement and click again on Agree When the installer asks you where to install macOS, choose your Sierra HDD click on Install. Sierra will be installed on the HDD, this will take about 6 - 15 minutes depending of your HDD. Upon completion, system will restart a 1st time. Press F12 key to choose the boot device. When the Clover Boot screen is visible, Choose "Boot macOS Install from Sierra". macOS will continue to Install the OS on your HDD this will take about 10 -25 minutes after that the installation will be finished and your laptop will reboot. 10. Booting for the first time macOS Sierra When the Clover Boot screen is visible, Choose "Boot MAC OS X from Sierra" You will eventually get to the setup screens for macOS Sierra. Go through the setup process to setup macOS Sierra. At the country selection choose your country and press continue. Select Your Keyboard choose ABC and press Continue. Choose at "How do i connect to the internet " ..."My Computer Does Not Connect to the Internet", we will fix this later, go further with the setup process and press continue. Choose at Transform Information To This Mac for "Don't Transfer any information now" click on Continue. At Enable Location Services for "Enable Location Services on this Mac" click Continue. Agree the Terms and Conditions. Create your Computer Account and uncheck "Set time zone based on current location" press Continue. Choose your Timezone and click Continue. At the Diagnostic screen click Continue. The setup process is ready, Done!. 11. Setting up your keyboard When the setup is finished the Keyboard Setup Assistent will appear. Press Continue to Identify Your Keyboard. You will ask to press some keys. After pressing some keys you will get the message Your Keyboard Cannot Be Identified, press OK. Choose at Select the Keyboard Type for ANSI (United States and others) Press Done your Keyboard is setup 12. Adjust some settings in macOS 10.12 Once in 10.12 go to Finder – Preferences – General and choose in show these items on the desktop for Hard Disk External Disk Go to tab Sidebar and choose your desired Favorites, Shared and Devices. Close the Finder Preferences. 13. Change Security & Privacy for 3rd party software Start Terminal choose GO - Utilities - Terminal. In Terminal type sudo spctl --assess --master-disable followed by password to activate the option in Security & Policy "Allow apps downloaded from" Anywhere. Go to System Preferences – Security& Privacy and look of the option "Anywhere" is active if not activate the option. Close system preferences. 14. Revert HDD for proper boot. Launch Terminal and execute the following command: sudo diskutil corestorage revert / When prompt type your password. Exit Terminal and reboot again with your USB to macOS. 15. Installing Clover to the HD The steps 15 and 16 are the same as steps 6 and 7 but now we will install clover to the HDD of the E6320. Unpack the E6320.zip to your desktop or specified map you preferred. Open the map E6320 - Clover_v2.3k_r3726. DubbleClick on the Clover_v2.3k_r3726.pkg package file. Clover installation screen will be prompt. Click on Continue - Continue. Click on Change Install Location on the right bottom. Choose your HDD named Sierra click on Continue. Click on Customize on the left bottom. Choose Install Clover in the ESP Choose Bootloader : Install boot0af in MBR Choose in Clover EFI for CloverEFI 64- Bits SATA At last choose Install RC Scripts on target volume Click after that on Install, Clover will installed on the EFI Partition on the USB after install you can see the EFI partition in Finder. 16. Prepare HDD for booting the Dell E6320 Now, we need to prepare the HDD Drive so that it will properly bootup on your PC. Go to map where you have unpacked the E6320 zip file there you will find a map called EFI. Copy the map EFI and go to your EFI partition thru Finder. Paste the EFI folder in the EFI partition and replace everything. Done your E6320 is ready to boot macOS Sierra. 17. Install Wlan driver for the TL-WN725N The wireless lan on the Dell E6320 doesn’t work, therefore I use a Wireless N USB Nano Adaptor from TP-LINK. The software is straight forward and installs without problems. Go to your E6320 folder which you have extracted to your HDD of your macOS Sierra. Open the map "beta driver for mac os X 10.11" . Run Installer_RTL.pkg Click Continue - Continue - Continue - Agree - Install Enter your Password and click Install Software - Continue Installation Click Restart to Reboot your Laptop. The first time you will get a kernel panic don't worry reboot again and the laptop will start macOS Sierra. Done! 18. What's working? Just about everything. 19. Finished! You’ve successfully installed macOS Sierra onto your Dell Latitude E6320. TROUBLESHOOTING 20. iMessage & FaceTime Fix You will need MLB and Rom numbers from a legit Mac device that is on the mac server. Run iMessage debug on a iMac, Macbook, etc and make a copy and paste of the Terminal output. Open Clover Configurator. Mount EFI Partition. Import config.plist from EFI/EFI/Clover (File , import configuration, browse to config.plist and select). In Clover Configurator Click on RT Variables, Enter Rom and MLB Values from iMessage output from valid iMac device. Save changes to config.plist. Reboot, Sign into iMessage. iMessage and FaceTime should now both be working. 21. BOOT 0 Error If you are using a 4k HDD you can get boot:0 error, to solve this issue do the following. Reboot system back into Sierra installer (USB)FLASH DRIVE). Run Disk Utility find the Disk Identifier (eg. disk0s2). Unmount the drive you installed Sierra on. Launch Terminal and execute the following command: dd if=/usr/standalone/i386/boot1h of=/dev/disk0s2. Exit Terminal. Boot Normally. Run macOS Sierra 10.12 E6320.pdf
  15. All kexts and files needed to proper install and boot G780 with ivy bridge i7 (only for 17" 1600x900 - patched dsdt with dual link). Maybe will work for 15" too. Who knows.... http://www.osx86.net/files/file/3523-lenovo-g780-i7-ivy-bridge-kextsextra/ Pre-install: update to latest bios 5ECN96WW, disable nvidia in bios (or you need to delete all NV* kexts from /S/L/E), Disable UEFI, select everything whats possible to Legacy mode 1. Create installer with myhack 3.2 beta 8 2. replace the Extra folder with this one. 3. Install all kexts from /Extra/Extensions to /S/L/E using kext wizard (yes you will have them duplicated but thats ok). Repair permissions and rebuild cache 4. Connect USB to port located on right side where the optical drive is. 5. No boot options needed (-f = if you did not rebuild the cache). Full resolution with QE/CI installer will appear. Install Mac OS 6. Reboot, boot from installer, selected installed disk and use "-x -f USBLegacyOff=Yes" 7. Copy Extra folder from installdisk to installed ML 8. install all kexts from /Extra/Extensions to /S/L/E and delete the /Extra/Extensions folder. Repair permissions, rebuild cache. 9. Boot and enjoy. Update to 10.8.5: Use Combo update, rollback AppleACPIPlatform from this file. If doesn not help, refresh all kexts from this file to your /S/L/E Not working: Wifi, FN Brightness, Nvidia, touchpad after wakeup. PS: In case you don't have QE/CL try different efi string injection for the HD4000. If the USB disk wont appear in boot menu restart using CTRL+ALT+DEL. This laptop does POST boot so fast that my USB HDD won't make it at first time after turning on using power button.
  16. Run OS X El Capitan on a Dell Latitude E6320 This tutorial will describe the steps to install OS X El Capitan on a Dell Latitude E6320 i5 2520M. If you find any mistakes or have something to improve then please send me a PM and i will update the tutorial. A special thanks goes to Brian from Tech Erra, Jake Lo from OSX Latitude.com and Morpheousman for using parts of their tutorial I am from The Netherlands so sorry for my bad English. 1. Credits/Sources Everything OSx86-related is a collaborative effort amongst people who enjoy doing these things, as well as those of us who enjoy tweaking and experimenting with things. Below are a list of sources used to compile this guide: Tech Erra OSX86 Wiki InsanelyMac Forum member Jake Lo from OSX Latitude.com for helping me out with installing Morpheousman and Polyzargon from Insanelymac who helping me with my other topics. (Dell 780) MacPeet, Chris1111 and all other forum members who helping out the community. 2. Requirements Here are the requirements: A Dell Latitude E6320 i5 2520M – This is necessary to install OS X El Capitan for this tutorial A copy of Mac OS X – This can be in the form of an existing hackintosh, a virtual machine within Windows or Linux, or even a regular Mac. If you don’t have any of these things, then find someone who can help you out for a while. I prefer using a hackintosh with OS X Yosemite. Using an already working copy of Mac OS X either in a VM or a native hackintosh install is HIGHLY recommended. A 8GB USB flash drive (or larger) – We’ll be copying the files to the drive appropriately, so make sure that you have a flash drive with enough storage space (8GB or larger). A copy of OS X El Capitan – The method used by this guide requires that you have a copy of the OS X El Capitan Installation app, wich is available for free from the Mac App Store. 30-60 minutes of time – Depending on how tech-savvy you are, this may be quick, or it may take a while. An SSD or HDD to install 10.9 to – For me, I used a 250GB partition to install 10.9 to. An Wireless N Nano USB Adaptor – For use with wifi Highly recommended. I use a TP-LINK TL-WN725N adaptor. E6320.zip – This ZIP file contains everything that you need to get your flash drive properly prepared. 3. My Specs My installation was successfully done on an Dell Latitude E6320 i5 2520M Laptop computer with the following specs. NOTE: A Wireless N Nano USB Adaptor is recommended to use the full potential of OS Mavericks because the on board wifi doesn't work. - Intel Core i5-2520M @ 2.5GHz, 3MB cache, Dual Core - 4GB DDR3 1333Mhz RAM - Western Digital 250GB HDD - INTEL HD3000 Video - Intel 825xx onboard network - Bluetooth radio onboard (works OOB) - IDT 92HDxxx HD audio onboard - TL-WN725N Wireless N Nano USB Adaptor - Apple Magic Trackpad (only @home) - Apple Wireless Keyboard US (only @home) - Apple Magic Mouse 4. Download OS X El Capitan Start OS X Yosemite on a exsisting Mac or Hackintosh, to prepare your USB Flash drive. Make sure to backup the files that are already on your USB Flash drive thru disk Utility in Mac OS X. Open Mac App Store. Login with your Apple ID. Download OS X El Capitan Done! The application INSTALL OS X El Capitan will appear in /Applications. 5. Prepare Bootable USB Installer Now, we need to prepare the USB Drive so that it will properly bootup on your PC. I recommend using Chris1111'S app for creating your USB Installer. It is a great timesaver! Download App Here[/url Follow the instructions in the first Post for creating USB Installer. Select Installer OS X El Capitan and Install in ESP (see image below) Select Install. This step may take some time, good time to get a drink. After App is finished, you will see a EFI Partition of USB installer on your desktop. Open EFI Partition, then open EFI folder, copy and paste the Clover folder from the zip file, to the EFI folder, choose replace folder. Download the latest version of Clover Bootloader and copy it to the root of your USB installer. USB Installer is Done! 6. Bios Settings Dell Latitude E6320 Before we boot from the Dell Latitude we need to optimize the bios for OS X El Capitan. Start your Dell Latitude and press F2 to get into the Bios. In the main screen click on "Load Defaults", the bios will be reset to default settings. Go to General - Boot Sequence and choose on the right for USB Device and click the up arrow so that the USB Device is on top, click on apply to make the setting. Go then to System Configuration - SATA Operation and choose on the right for AHCI click again on apply and choose exit, now the Bios is ready for installing OS X El Capitan. 7. Installing OS X El Capitan from your USB drive Time for the fun stuff! We’ll now boot from your USB drive and install OS X El Capitan onto the Hard Drive. Using a USB 4G flash drive will help things out quite a bit. Power on unit while tapping F12 Key to choose boot device, select USB device. When Clover boot screen is visible, choose boot "Mac OS X from El Capitan USB Installer". The system will then boot into OS X installer For a new installation of OS X, you must erase and format the destination drive according to the following steps before continuing. If you are upgrading from Lion, Mountain Lion, Mavericks or Yosemite and you want to keep your files and apps, skip steps a-j. A. Choose Disk Utility B. Highlight your target drive for El Capitan installation in the left column. C. Click Partition tab D. Click Current and choose 1Partition E. Click Options.... F. Choose GUID Partition Table. G. Under name: Type El Capitan (you can change it later if desired). H. Under Format: Choose Mac OS Extended (Journaled). I. Click Apply the Partition. J. Close Disk Utility. When the installer asks you where to install, choose El Capitan Hard Drive. Upon completion, system will restart a 1st time. Press F12 key to choose the boot device. When the Clover Boot screen is visible, Choose your El Capitan Hard Drive. You will eventually get to the setup screens for OS X El Capitan. Go through the setup process to setup OS X El Capitan. Choose at "How do i connect to the internet " ..."My Computer Does Not Connect to the Internet", we will fix this later, go further with the setup process. The setup process will take about 3 minutes. Done! 8. Adjust some settings in OS X 10.11 Once in 10.11 go to finder – preferences – General and choose in "show these items on the desktop" for Hard Disk External Disk CD Go also to System Preferences – Security& Privacy click on the lock icon in the lower left corner and type your password. Choose by “Allow applications downloaded from": click on "Anywhere" Close system preferences. 9. Installing The Clover Bootloader on Your Hackintosh The following instructions may appear a bit oversimplified, but we are trying to keep it simple for first-time Clover Bootloaders users. Copy the Clover Installer from the root of your El Capitan USB Installer to your desktop. Open Clover Package installer. Hit Continue, Continue, Change Install Location... Choose your HD, now called El Capitan and press Continue (see images below) Hit Customize and install clover with the following Custom Install settings (see images below) After installation of the Clover Bootloader, the EFI Partition of your El Capitan Hard Drive should be mounted on your desktop. Copy the Clover folder from the zip file into your El Capitan EFI Partition > EFI Folder. Make sure to choose to Replace the Clover folder. In Tools Folder of the zip file, Open Clover Configurator. Click File, Open File and select config.plist in EFI/EFI/Clover. Click on SMBIOS in left side pane and create your new SMBIOS (iMac 8.1) with Random Serial Number. Close Clover Configurator and save changes. Finished! Now remove the USB Installer and reboot into OS X El Capitan. 10. Install Wlan driver for the TL-WN725N The wireless lan on the Dell E6320 doesn’t work, therefore I use a Wireless N USB Nano Adaptor from TP-LINK. The software is straight forward and installs without problems, the only thing is that after login the wireless app starts up and you have must close it every time, therefore I have made a script to launch the program after login and close it after 5 seconds. For installing the driver go to the folder “E6320 – Wlan_TP-LINK”. Launch the Installer.pkg and install the software, after install you will get the message to restart. Choose restart to restart you laptop. After restart the software will start the Wireless App. Choose you desired network and add it to your profile. Now we can install the login script. Go to “System Preferences – Users & Groups”, go to tab Login Items. Choose the + sign and browse to the folder “Install_E6320 - Wlan_TP-LINK” and choose “Wireless App2”. Close System Preferences. 11. iMessage & FaceTime Fix You will need MLB and Rom numbers from a legit Mac device that is onthe mac server. Run iMessage debug on a iMac, Macbook, etc and make a copy and paste of the Terminal output. Open Clover Configurator. Mount EFI Partition. Import config.plist from EFI/EFI/Clover (File , import configuration, browse to config.plist and select). In Clover Configurator Click on RT Variables, Enter Rom and MLB Values from iMessage output from valid iMac device. Save changes to config.plist. Reboot, Sign into iMessage iMessage and FacTime should now both be working. 12. What's working? Just about everything. 13. Finished! You’ve successfully installed OS X El Capitan onto your Dell Latitude E6320. TROUBLESHOOTING 14. BOOT 0 ERROR If you are using a 4k HDD you can get boot:0 error, to solve this issue do the following Reboot system back into El Capitan installer (USB)FLASH DRIVE). Run Disk Utility find the Disk Identifier (eg. disk0s2). Unmount the drive you installed Mavericks on Launch Terminal and execute the following command: dd if=/usr/standalone/i386/boot1h of=/dev/disk0s2 . Exit Terminal Boot Normally 15. 16 Message "attempted to boot into EFI while legacy is on". Sometimes the above message will appear after formatting HDD and installing OS X. Reboot system back into El Capitan installer (USB)FLASH DRIVE). Run Terminal. Launch Terminal and execute the following command: sudo diskutil corestorage revert / When prompt type your password. Exit Terminal Boot with your USB to El Capitan Launch Terminal again and execute the following command to format EFI partition: sudo newfs_msdos -V EFI -F 32 /dev/rdisk0s1 After that install Clover to your HDD see chapter 10 "Installing The Clover Bootloader on Your Hackintosh" Done ! run os x el capitan 10.11 E6320.pdf
  17. Informações deste Notebook: i5-3210M | 4GB 1600MHz | HD 4000 | Audio - Cx20590 | Wifi - AR9285 | Network - Atheros AR8162 - BIOS: Insyde H2O - 3.7 Muito Bem, como alguns aqui vem acompanhando a install pra esse Note não é tão facil, é um pouco complicada, basta ter paciencia. Editar seu boot.plist pra subir a IntelHD4000 sem precisar usar o GE=Yes. Insira no boot.plist. Codigo para subir a IntelHD4000 7f0000000100000001000000730000000200000002010c00d041030a000000000101060000027fff04002c0000004100410050004c002c00690067002d0070006c006100740066006f0072006d002d006900640000000800000003006601140000006800640061002d0067006600780000000d0000006f6e626f6172642d31 Segundo: Como extrair sua SSDT pelo terminal. Vc vai ter que baixar um patch feito pela Revogirl! OK deixe esse patch na area de Downloads. Agora procure pelas especificações do seu CPU em http://ark.intel.com/ Por exemplo, o meu é: Intel® Core™ i5-3210M Processor (3M Cache, up to 3.10 GHz) Max Turbo Frequency 3.1 GHz Max TDP 35 W Tendo essas informações em mãos, vamos ao código. Usando como base as informações acima do TDP e Frequência Máxima. No Terminal digite: sudo /Users/seunome/Downloads/ssdtPRGen.sh 35 3100 open /tmp Vai abrir um pasta "tmp", dentro dela vai estar sua SSDT. Edite e compile ela de acordo com seu gosto. Terceiro: Agora, em vez de baixar a AICPM pronta, resolvi patchear a minha!! Baixe o Patch: Depois de extrair seu patch, abra o terminal e digite: OBS: Faça Backup do seu AICPM original antes!! Código: cd ~/Downloads/AICPMPatch Procurar wrmsr (sem modificar) Código: perl AICPMPatch.pl /System/Library/Extensions/AppleIntelCPUPowerManagement.kext/Contents/MacOS/AppleIntelCPUPowerManagement Modificar Código: sudo perl AICPMPatch.pl /System/Library/Extensions/AppleIntelCPUPowerManagement.kext/Contents/MacOS/AppleIntelCPUPowerManagement --patch Feito isso você pode excluir a Null de E/E. Quarto: Para extrair a DSDT, você pode extrair ela no Windows pelo Aida64, eu extrai a minha de 2 maneiras, uma pelo Windows e tem tambem pelo Ubuntu! Acho mais confiavel o Ubuntu. Você decide!! Codigo: cd ~/Desktop sudo cat /proc/acpi/dsdt > DSDT.aml Compile ela e aplique os Patchs pros USBs, e os pro Sleep. Patchs Usados: LPC RTC DTPG IRQS _T_x rename New Patchs para USB 3.0 e Sleep. https://www.dropbox.com/s/uyz3bz99tcq94k7/XHCI.txt https://www.dropbox.com/s/56s84dun0kgayut/EHC1.rtf Foi usado tambem o New HPET. E com relação a DSDT, lembrete importantissimo!! Fique atento se a sua BIOS é ou não da mesma versão que a minha. Minha BIOS: Insyde H2O Versão - (3.7) - Data: 28/08/2012 Tem até a DSDT que o Flavio fez pra mim, que tem controle de brilho e GMUX. Na nota dentro do Pack vai te explicar melhor! Ultimo: Quando fiz tudo isso, infelizmente o boot travou, mas não se desespere aqui está a solução: Abra o terminal, digite: sudo –s (enter) digite sua senha depois copie e cole uma linha de cada vez do texto abaixo no terminal e dê enter: cd /System/Library/Extensions/IOAHCIFamily.kext/Contents/PlugIns/IOAHCIBlockStorage.kext/Contents/MacOS sudo mv IOAHCIBlockStorage IOAHCIBlockStorage.orig sudo cp IOAHCIBlockStorage.orig IOAHCIBlockStorage sudo /usr/bin/perl -pi -e 's|\x8b\x4a\x00\x00\xeb\x03|\x8b\x4a\x00\x00\xe8\x01|g' IOAHCIBlockStorage sudo /usr/bin/perl -pi -e 's|\x74\x0e\x48\x8d\x3d\x72\x92\x00\x00|\xbf\xc8\x00\x00\x00\x90\x90\x90\x90|g' IOAHCIBlockStorage sudo touch /System/Library/Extensions Coloquei isso porque? Bem eu subo com -f, dai com esse codigo, consigo subir normalmente!! Foi preciso tambem consertar o Boot0 Dica de como corrigir Boot0:error Deixar o Hack iniciando na "Velocidade da Luz"kk Essa dica foi me dada pelo Dorgas, e vale muito pena vc fazer isso no seu Hack. Colocar todas as Kext de E/E em S/L/E, e depois rodar esse comando no Terminal: sudo touch /System/Library/Extensions E depois se tive marcado a flag (-f) no boot.plist, desmarque ela e marque o Use Kernel Cache. Tem mais: Esse código eu aprendi com um amigo meu, seguinte este patch ele conserta alguns bugs com relação ao desempenho e energia no Lenovo G480, por ex: Eu testei com uma SMBIOS de MacBookPro8,1 e ficou muito melhor o Note, mas como sabem, meu processador é um IvyBridge, então nada mais certo usar o SMBIOS de MacBookPro9,2. Pra modificar isso, e balancear o desempenho com o reconhecimento do processador. Abra o Terminal e execute, o código inteiro copie ele todo e joga no Terminal e "Enter", espere, e seu desempenho subira uns 30%. sudo cp /System/Library/Extensions/IOPlatformPluginFamily.kext/Contents/PlugIns/ACPI_SMC_PlatformPlugin.kext/Contents/Resources/MacBookPro8_1.plist /System/Library/Extensions/IOPlatformPluginFamily.kext/Contents/PlugIns/ACPI_SMC_PlatformPlugin.kext/Contents/Resources/MacBookPro9_2.plist ; sudo perl -pi -e 's|MacBookPro8,1|MacBookPro9,2|g' /System/Library/Extensions/IOPlatformPluginFamily.kext/Contents/PlugIns/ACPI_SMC_PlatformPlugin.kext/Contents/Resources/MacBookPro9_2.plist ; sudo touch /System/Library/Extensions Ok é isso!! OBS: Depois de vc ter feito tudo isso, atualize direto pro 10.8.5 - Combo Update!! Resumo do que está funcionando: USB 2.0 e 3.0 = Funcionam, se você for fazer a install do Mac e preferir usar o Pen, use a USB 2.0 do lado direito. OBS: As USB 3.0 funcionam são rapidas e talz, mas não tenho nada 3.0 pra testar! Ethernet - Ok Wifi - Ok AppleHDA, som perfeito. - Ok Drive CD/DVD - Ok IntelHD 4000 - QE/CI. - Ok SpeedSteep. - Ok Sleep nas USBs 2.0 e 3.0. - Ok HDMI - Somente Video. Ok WebCam, reconhecida nativamente!! O que falta, estamos ainda trabalhando: SD Card - Comigo não funcionou ainda alguns métodos, mas o trabalho feito que Flavio pode te ajudar, no tópico sobre esse note vai ter uma Kext que ele desenvolveu, excelente trabalho!!! Saida VGA. Agradecimentos ao Flavio, André e Fabio pela excelente ajuda, ainda não terminou mas de acordo com o desenvolvimento pro SDCard irei colocar nesse topico. Editado. Seguinte minha DSDT agora está editada para não usar mais o device-properties, com a ajuda do André, agora inseri o patch para a Intel HD 4000 na DSDT com o ig-platform-id. Reconheceu na 1º. Coloquei dentro do Pack a DSDT modificada, SSDT modificada, nova boot.plist e SMBIOS. E contem também, a NVram para evitar o problema no Mensagens, com relação a logar nele. Mas para ter sucesso, lembre-se tem que colocar seu cartão de credito internacional na AppStore, se não, não adianta nada. Pack de Kexts e DSDT Novas PXHCDs. E kexts do ML DP3. Creditos de alguns metodos e muita ajuda: HMBT, Olarila e ProjectOSX. Esse tutorial pode ser aplicado desde o Mountain Lion até o Mavericks, a versão usada do Chameleon é a 2263.
  18. Esta es una mini guía para aquellos impacientes que no puedan esperar que se actualicen los kexts pre-compilados y se animen un poquitín a meter mano. 1- Primero que nada necesitan Xcode , lo pueden descargar del AppStore. 2- Descargar las fuentes del kext desde el repositorio. Normalmente hay al menos 2 maneras de obtener las fuentes: Si solo queremos compilar el kext y luego eliminar las fuentes recomiendo descargar el ZIP del proyecto. Si queremos mantener el repo en el disco, y actualizar el kext cada tanto necesitan abrir un Terminal: svn checkout url -- en caso que sea un repositorio svn git clone url -- en caso que sea un repositorio git Y luego, dependiendo si es svn o git, lo actualizan con: svn update git checkout 3- Una vez descargado repositorio buscar y abrir el archivo *.xcodeproj: 4- Asumiendo que el proyecto no tiene errores, solo deben presionar "Play" para compilar: 5- Al terminar la compilación el kext los espera en una sub-carpeta llamada "Products", que localizan de esta manera desde el panel de la izquierda:
  19. -------------------------------- INTRO -------------------------------- So, you've come to your senses and decided that you want to use the stock G5 enclosure eh? Good for you Jokes aside, I think it's about the cleanest way to include your PSU in a G5 mod, and it really isn't as hard as you may think. All it takes is a little modding know-how, a little safety, a dash of luck, and you will have yourself a clean looking hack! This tutorial is also permanently available on the G5Modders Tutorial Page. IMPORTANT SAFETY NOTE: PSUs contain capacitors that can give you a nasty shock and possibly do some real damage. General safety tips would include leaving your psu unplugged for a few days, flipping the power button a few times after that to discharge any stored current, and touching the capacitors with an electronics-grade insulated screwdriver (link) to aid in discharge. I'm not responsible for any damage to person or equipment! There are a couple methods to this modification, two of which are discussed. The first option is to keep the PSU inside its original casing, cutting down the walls to fit inside the G5 enclosure. The benefits of this method are a stronger attachment for any modular plugs, as well as a flat surface for attaching the PSU to the enclosure. The down side is that you have to cut your ATX casing, not only adding difficulty but also making sure your warranty is totally shot. The second method is to remove the PSU from its original casing entirely to fit inside the G5 enclosure. The benefits of this method are an easier mod overall with no cutting, better airflow and (almost certainly) an easier fit. The only real caveat is that if you're using a modular PSU, the plugs will no longer be attached to anything solid barr custom fabrication. Each method has its pros and cons, but the great part is that each method leaves you with a clean-looking mod in the end. Take some time to weigh the above pros and cons, and choose which method is best for you! In case you're interested, the proper terminology for the G5 power supply is "TeslaConverter", but I find using this term produces blank looks from many-a G5 modder, so PSU enclosure it is! You will need: - Powermac G5 PSU Enclosure - An ATX power supply, modular preferred - A pair of metal cutters/a dremel/a jigsaw - A philips-head screwdriver - Soldering iron, solder, heatshrink (optional) -------------------------------- TUTORIAL -------------------------------- STEP 1: STRIPPING THE G5 PSU ENCLOSURE Here's the stock G5 psu in all its glory. There are eight screws that you will need to remove to gain access to the internals, I have marked them for your convenience: Two of the screws may be hidden by plastic moulding that surrounds the cables as they exit. They can be tricky to spot, but once you have removed them you can remove the top cover. As you can see, I have also marked the location of the screws that hold the internals down to the actual enclosure. This may vary a little depending your year of manufacture (and possible even your country of residence) but generally there are five that need to come out: Don't forget to unplug the fans from the PCB! If you are keeping the stock power socket (recommended) simply cut the three wires as close to the PCB as you can, you'll need some room to splice later! And here she is, ready for the transplant: --------------------------------------------- STEP 2: PREPPING THE ATX PSU CASE --------------------------------------------- Assuming you didn't electrocute yourself, let's move on. For this mod, I'm using the Corsair Modular CX430M and will be demonstrating the first method discussed in the introduction. Most of the information still applies to the other method! When choosing a power supply for the first two methods, just make sure that it uses a standard width fan on top, so that the internals are low enough to be put in the G5 case. Honestly if you can afford it, a modular power supply is really going to save you a lot of hassle in the long run. More than with a regular computer case, space is in high demand inside the enclosure! People have alleviated this lack of space by using an SFX-factor PSU. Despite still needing the cutting of or removal from its original casing, being a smaller form-factor it leaves you much more space to work with! Ready to void that warranty? Here you can see what I mean about the height of the heatsinks: It's a good idea at this point to do a dry run with everything inside the G5 case. This way you can see if everything is going to fit before you destroy a perfectly good PSU: If it looks like clearance isn't a problem, it's time to get modding! If, like me, you are cutting the PSU enclosure, it's time to get out your cutting tool of choice and begin to cut down the PSU walls. --------------------------------------------- STEP 4: FITTING THE ATX PSU --------------------------------------------- Important Note: Make sure that the bottom of the enclosure has insulation, otherwise you're going to make the whole thing explode! The plastic left over from removing the Apple internals will be just fine, but any insulation-grade plastic will do. If you have decided to remove the PSU entirely from it's original casing (method 2), at this point you should remove it from the casing and place it inside the G5 enclosure, fixing it either by using screws, or double-sided tape will also work. Here's a picture of Mr D.'s modification following this method. You can see a gallery of the full process here, or head on over to his worklog. If you're cutting the original casing, put the PSU back inside the G5 enclosure, and make sure your cuts are at the correct height. I had to file down a little bit because they were a hair too high. That wasn't so hard was it? For each method, put the top cover on to make sure that everything does actually fit, then do a little jig when it does: Finally, you're going to want to plan where you want your cables coming out of. I used two of the G5's original cuttings to bring out a custom power cable (left in grey) and the motherboard ATX connector (center), but had to enlarge the hole on the right some for the modular cables and ATX power cable to come out of. Aside from that there really wasn't a lot of extra cutting involved! Here is the final shot with all the necessary cables coming out: --------------------------------------------- STEP 5: SPLICING THE POWER CABLE --------------------------------------------- Your final step is to splice in a power cable so that you can use the stock socket on the back of the G5. For this, you will need your soldering iron and heatshrink/electrical tape. First, strip down the wires attached to the stock plug. I stripped about 3/4" on the neutral and hot wires: At this point, put your heatshrink over the wire and push it to one side so the soldering doesn't shrink it accidentally. Now, solder the corresponding wires from your cable to the power socket. Generally, they should match in color but check your country's standard colorization for electrical wiring, it may differ. The grounds are easy, simply twist them together and screw them back in to the stock mounting hole. For a more elegant solution, simply purchase an eyelet to match the one shown, although this isn't necessary. Finally, apply heat to your heatshrink to create a tight fit, and you're done!! You can now run your cable to wherever it needs to go to be plugged in to the ATX PSU. -------------------------------- CLOSING THOUGHTS -------------------------------- You're done! Honestly, this really isn't as hard as you might think. Sure you can get all fancy by mounting modular sockets to the enclosure itself, but when it really comes down to it the only thing you have to worry about is getting a nasty shock, which can be generally avoided by following the red precautionary text at the beginning on this tutorial. As I mentioned at the beginning, each method has its own pros and cons, but the overarching principle here is that you can create a very sleek mod with relative ease. Thanks for reading, I hope this tutorial helps someone in deciding what to do with the PSU in their G5 mod!
  20. WhatTheTech

    [Tutorial] - Hackintosh Bluetooth Module

    INTRO This is about the easiest way of adding bluetooth to your hackintosh. Forget nervously waiting to see if the latest update will knock out your 3rd-party bluetooth, this uses an Apple bluetooth module that will never be phased out (or most likely not)! Permalink for this tutorial: http://www.whatthete...ntoshbluetooth/ Parts Needed: Apple Bluetooth Module A1181 ($6 - Make sure you get one with the connector cable!) 2 x 1N4001 Micro 1A Diodes ($4 for one hundred!) iMac Bluetooth Antenna ($7 - Much better reception than the A1118 antenna!) A USB Motherboard Header ($1.99) Tools Needed: This is a very easy modification, but you will also need a few tools: - Soldering Iron & solder - Heat Shrink tubing (1/8" or smaller - electrical tape not recommended for precision work) - Sleeving (optional - example) THE PROCESS: Step 1: Prepping the USB Cable First of all you will want to remove one end of the motherboard header so that just the pins or wires are left, as you can see on the far left of this image: Feel free to just cut one end off and strip down the individual wire casings, ready for soldering. Note: At this point it is recommend that you twist the data wires together along the entire length of the cable. This helps reduce EMI and should give you a more stable signal overall. Step 1.1: (Optional) Sleeving At this point, I would suggest putting the sleeve over your cable because once you've soldered everything it becomes a hassle. Simply slip the sleeving over your cut wires and push it down to the end, as pictured below (as well as one cut of heat shrink to stop that end fraying): Step 2: Prepping the Bluetooth Cable The USB cable is going to be attached to the cable that came with your Apple bluetooth module (pictured below), so also cut the end that would plug into the Apple motherboard (NOT the bluetooth module end). Take care to leave enough cable for soldering and then some. Mistakes are made, and my first bluetooth was ruined because I didn't leave room for error. You should be left with this: Step 3: The Diodes The diodes are important because the bluetooth module will not run on 5V - it needs to be around 3.7V, and may indeed WILL become damaged on regular USB power levels. The two diodes should be soldered into the red power wire nose-to-tail, with the forwards voltage soldered (i.e. going towards the bluetooth module) as shown. Step 4: The Other Wires As you can see from the diagram below, the rest of your soldering is quite simple. The black (ground) cables connect directly together, and the Data cables cross over colorswith green USB going to yellow bluetooth, and white USB going to green bluetooth. This is the main cause of non-working mods, so if nothing is happening when you plug it in, this should be the first thing you check. Get everything soldered and heatshrink the wires individually and you are good to go! Step 5: Placing the Bluetooth Antenna If you have a metal case (and sometimes if you don't) you may find that bluetooth reception is spotty. This can be VERY inconvenient with issues ranging from a jumpy mouse to static from your bluetooth audio feed. Below are some general tips (in particular order) to ensure that you have the best experience possible. - As mentioned, make sure that you twist the data wires together. This reduces EMI and really does make an incredible difference in certain cases. - Use a longer antenna. If you have been inside any mac desktop, you will know that the antennas they use are long, and usually end up (the actually antenna part) somewhere near the outside of the case. This is for a good reason, so check out the original link or search around for the best price on a long antenna cable. - When mounting your antenna to your case, make sure the front of the antenna is not the side attached to the case. Preferably use double-sided tape/foam so that the antenna is not touching metal. - As far as best positioning, it really depends on your case. There is no formula for this except trial and error. A useful tip for helping you gauge bluetooth signal: There are apps for both iOS and Android that have a built-in bluetooth strength meter. Place your phone/tablet on the table where your mouse would be, and move the bluetooth antenna around the case. It would be a good idea to put the side panel on with each placement to get a more accurate reading. This is how I found out that my signal was better at the back on my case rather than right at the front like I had it initially!
  21. Updated 27 februari 2014 - Added update 10.9.2 steps in the document - Latest PDF version 1.2 with date 27 februari 2014 Updated 21 october 2013 - Fixed some text true the document - Rewrite of chapter 7 - Added new images for chameleon install and iMessage Error - Added section TROUBLESHOOTING - Added Boot 0 : ERROR in Troubleshooting - Added iMessage Error in Troubleshooting - New Install109.zip Run OSX Mavericks on a Dell Optiplex 780 This tutorial will describe the steps to install Mavericks on a Dell Optiplex 780 (this will also works on a 760). The installation goes to the latest version of 10.9, and when there is a new update i will change the tutorial as soon as possible. If you find any mistakes or have something to improve then please send me a PM and i will update the tutorial. I have also included the PDF file of the guide and the zip file to install OSX Mavericks. A special thanks goes to Brian from Tech Erra for using parts of their tutorial. I am from The Netherlands so sorry for my bad English. 1. Credits/Sources Everything OSx86-related is a collaborative effort amongst people who enjoy doing these things, as well as those of us who enjoy tweaking and experimenting with things. Below are a list of sources used to compile this guide: Tech Erra OSX86 Wiki InsanelyMac Forum member Pingu from Germany for helping me out with the text changes. And all other forum members who have posted in my topic and helping out the community. 2. Requirements Here are the requirements: A Dell Optiplex 780 – This is necessary to install OSX Mavericks for this tutorial A copy of Mac OS X – This can be in the form of an existing hackintosh, a virtual machine within Windows or Linux, or even a regular Mac. If you don’t have any of these things, then find someone who can help you out for a while. I prefer using a hackintosh with OSX Mountain Lion. Using an already working copy of Mac OS X either in a VM or a native hackintosh install is HIGHLY recommended. A 8GB USB flash drive (or larger) – We’ll be copying the files to the drive appropriately, so make sure that you have a flash drive with enough storage space (8GB or larger). A copy Mavericks 10.9 GM – If you don’t have a Mac Developer Account, then you’ll find torrents of 10.9 around the web. 30-60 minutes of time – Depending on how tech-savvy you are, this may be quick, or it may take a while. An SSD or HDD to install 10.9 to – For me, I used a 500GB partition to install 10.9 to. An PCI Express Video Card – For use with QE and CI Highly recommended. I use a Ati Radeon HD5450 1GB but 512MB or 2GB also works. Install109.zip – This ZIP file contains everything that you need to get your flash drive properly prepared. Note: The files for number 8 "Install109.zip" contains the following Directory's (4) and files: Kernel - Mach Kernel Kexts - FakeSMC.kext - NullCPUPowerManagement.kext - EliottForceLegacyRTC.kext - AppleIntelE1000e.kext - VoodooHDA.kext OSInstall - OSInstall - OSInstall.mpkg (Not used for my configuration because I use the entire hard disk) Utils - Chameleon-2.2svn-r2265 - Chameleon Wizard - Kext Utility - EFI Studio - ShowHiddenFiles The first 3.kext files will fix most kernel panics en bios reset that you might experience while booting. The 2 OSInstall files will allow you to install 10.9 onto an MBR-partitioned drive ( ! this is not tested, for further info go to insaneleymac forum !). 3. My Specs My installation was successfully done on an Dell Optiplex 780 Desktop computer with the following specs. NOTE: A PCI video card is recommended to use the full potential of OSX Mavericks because the on board video card doesn't support QE/CI. Intel Core 2 Duo E7500 @ 2.93GHz 8GB DDR3 1333Mhz RAM Western Digital 500GB HDD ATI RADEON HD5450 1GB Intel WG82567LM onboard network Bluetooth USB Cambridge silicon radio (works OOB) ADI 1984A HDA audio onboard HP W2207h Monitor 1680×1050 display Apple Magic Trackpad Apple Wireless Keyboard US 4. Preparing your SSD or HDD for install on a MBR-partitioned drive If you intent to install OSX86 Mavericks on the same Hard disk as your windows follow the steps below. For a clean install on a new formatted hard disk go to Chapter 5. If you’re in Windows 7, you can easily make a new partition on an SSD or HDD via the Disk Management program. Start>Run (or Windows key on your keyboard plus R). diskmgmt.msc (press enter after typing that) Find your drive, right-click on it, and go to Shrink Volume. Wait for it to calculate the amount of space you can make your partition, and enter in your amount (for an exact GB amount, multiple your desired amount of GB times 1024, so a 20GB partition would be 20480MB). Let it make your partition. It will show up as unallocated space. Format the new unallocated space as NTFS and give it a label (mine was Mavericks). Done! 5. Formatting your USB drive Start OSX Mountain (Lion) or Snow Leopard to prepare your USB Flash drive Make sure to backup the files that are already on your USB flash drive via Disk Utility in Mac OS X: Extract the zip file Install109.zip to your Mac OS x desktop Put USB drive in your Mac Open up Disk Utility. Click on your USB drive in the left sidebar. Click on the Erase tab in the middle. Choose “Mac OS X Extended (Journaled)” as the format, and give your drive a label (like “MAVERICKS USB”). Click on the Erase… button. Done! Leave Disk Utility open, as you’ll need it later. 6. Preparing your USB drive with 10.9 This part is the most time consuming. Using a USB 3.0 flash drive will help things out quite a bit. Mount the DMG for Mavericks (will be called Mac OS X Install ESD on your desktop). Show hidden files by running the app ShowHiddenFiles in the folder Install109 - Util on your desktop. Click on Show Special Files (leave the app ShowHiddenFiles open we need this later). In the folder MAC OS X Install ESD right click on Basesystem.dmg and choose “ open with DiskImageMounter(default) Switch back to Disk Utility. Click on your flash drive in the left sidebar. Click on the Restore button in the middle area. For the source, drag “Mac OS X Base System” from your desktop into the empty Source box. For the destination, drag your USB drive from your desktop into the empty Destination box. Click on “Restore” and type your password. This process will take anywhere from 5 to 10 minutes depending on the speed of your flash drive. When it’s finished, you’ll end up with 2 “Mac OS X Base System” drives on your desktop. Figure out which one is your USB copy (you can right-click > Get Info and use the capacity as an indicator), and rename it to MAVERICKSUSB, after that open it up. Once you’ve opened up MAVERICKSUSB (the one that’s your flash drive), go to /System/Installation. You’ll see a symlink for Packages. Remove it. Create a folder called Packages. Open up a window of the original Mac OS X Install ESD drive and copy everything within Packages to the empty Packages folder on your USB drive. Done! 10.9 is now installed onto your USB drive. Now, we need to modify some of the files on it so that it will properly bootup on a PC. 7. Adding the fixed 10.9 files to the USB drive Now, we need to modify some of the files on your USB drive so that it will properly bootup on your PC. Open the folder “Instal109 - Kexts” on your Mac OS X desktop. Copy 3 .kext files (FakeSMC.kext, NullCPUPowerManagement.kext, EliottForceLegacyRTC.kext) to /System/Library/Extensions on your flash drive. NOTE: The 2 OSInstall files will allow you to install 10.9 onto an MBR-partitioned drive, if you install it on the entire hard disk skip step 3 and 4 an go further with step 5. Copy the OSInstall file to /System/Library/PrivateFrameworks/Install.framework/Frameworks/OSInstall.framework/Versions/A/, overwriting the file that’s already there. Copy the OSInstall.mpkg file to /System/Installation/Packages/, overwriting the file that’s already there. Go to the root of your USB drive and create a folder called "Extra". This is used to store configuration files for the chameleon boot loader Run the Chameleon installation package from Install - Utils. Make sure to install this package to your flash drive. Choose in the Chameleon setup for Customize, in the customize screen choose Modules – FileNVRAM ( we need this to make iMessage work) after that go further with the install of Chameleon. Run the Chameleon Wizard click the “SMBios” tab then click "Edit". Now there is a list of “Premade SMBioses”. Look through this list and choose for your Dell Optiplex 780 the iMac9.1. Click “Save As” and save it to the /Extra folder we created on the USB stick. Choose Tab Org.Chameleon.boot and set the follow options like in the image below. If the settings are like the image then Click “Save As” and save it to the /Extra folder we created on the USB stick. Copy mach_kernel from the Folder Install109 - Kernel and paste it into the root of your flash drive. Lastly, copy extracted folder (Install109) which you have extracted earlier from the zip file to the root of your flash drive. You’ll need this in Chapter 12 Eject all mounted drives (this is not necessary) Go to ShowHiddenFiles and click hide special files after that close program. Eject your USB Drive Done ! 8. Bios Settings Dell Optiplex 780 Before we boot from the Dell Optiplex we need to optimize the bios for OSX Mavericks. Start your Dell Optiplex and press F2 to get into the Bios. Go to Boot Sequence and choose on the right for USB Device and click the up arrow so that the USB Device is on top, click on apply to make the setting. Go then to Drives - Sata Operation and choose on the right for Raid Autodetect/AHCI click again on apply and choose exit, now the Bios is ready for installing OSX Mavericks. 9. Installing OSX Mavericks from your USB drive Time for the fun stuff! We’ll now boot from your USB drive and install OSX Mavericks onto the partition or Hard Drive. Boot from your USB drive. Once in Chameleon let the boot loader resume (or hit enter to start it manually highlight your flash drive and add -v -f to the end, then push enter. You’ll see a lot of text fly by be patience startup may take a while.) Once you get into the installer (assuming your computer didn’t freeze, restart itself, or get a kernel panic), choose your partition or Hard Disk to install OSX Mavericks to. NOTE : when you install it on a partition skip step 5 - 10 see Chapter 4. (If you install Mavericks on the entire Hard disk follow the steps below ) In the installer open up Disk Utility. Click on your Hard Drive in the left sidebar. Click on the Erase tab in the middle. Choose “Mac OS X Extended (Journaled)” as the format, and give your drive a label (like “MAVERICKS”). Click on the Erase… button. Done close Disk Utility and go further with the installation process. The installation process will take about 5 to 15 minutes, depending on the speed of both your USB drive and your SSD or HDD. When finished boot to your new OSX Mavericks. 10. Booting OSX Mavericks! Now that everything is finally prepared, you can go ahead and boot into OSX Mavericks. Boot from your USB drive again your computer won't still be able to boot from the hard drive. 2. Once in Chameleon let the boot loader resume (or hit enter to start it manually highlight your flash drive and add -v -f to the end, then push enter. You’ll see a lot of text fly by be patience startup may take a while.) You’ll eventually get to the setup screens for OSX Mavericks. Go through that process to setup OSX Mavericks. Choose by "How Do You Connect" for "My Computer Does Not Connect to the Internet" we will fix this later in Chapter 12, go further with the installation process. The installation process will take about 3 minutes. Done! Proceed to Chapter 11 to install the bootloader to your partition so that you don’t have to rely on using your USB drive to bootup. 11. Installing the bootloader to 10.9 Once in 10.9 go to finder – preferences –General and choose in show these items on the desktop for - Hard Disk - External Disk - CD Go also to System Preferences – Security& Privacy click on the lock on the left corner and type your password Choose by “Allow applications downloaded from: for “Anywhere – Allow from anywhere Close system preferences. Navigate to your folder Install109 -Utils and run the chameleon package, install it to your OS X drive. Copy the Extra folder on your USB drive to the root of your HDD (open Finder -> Go -> Computer -> OS X -> paste folder). Done! 12. Install the Kext files for de Dell Optiplex 780 hardware Now, we need to install some Kext files on your Hard Disk drive so that the hardware will work properly on your PC. Open the folder “Install109 - Kexts” and select the following Kext files - AppelIntelE1000e.kext - EliottForceLegacyRTC.kext - FakeSMC.kext - NullCPUPowerManagement.kext - VoodooHDA.kext Drag the Kext files (which are mentioned above) over "Kext utility.app" (contained in folder “Install780”) and release the mouse Type your root password and the Kext files will be installed on your Hard disk. Reboot. Once in OSX Mavericks go to System Preferences – Network There will be a message saying “Network device is detected” Choose apply if you want to use DHCP or give a IP Address if you use static IP. Click apply to make the setting active. 13. Installing Video for QE/CI Manually Copy the Kext files AMD5000Controller.kext and AMDRadeonX3000.kext from system/library/extension to your desktop. Go to AMD5000Controller.kext and rightclick and choose Show Package Contents and open info.plist with textedit. Find <key>IOPCIMatch</key> and add your string for HD5450 ( HD5450 1GB the string is 0x68F91002 and for 512MB the string is 0x68E11002) <string>0x68F91002 0x68981002 0x68991002 0x68E01002 0x68E11002 0x68D81002 0x68C01002 0x68C11002 0x68D91002 0x68B81002 0x68B01002 0x68B11002 0x68A01002 0x68A11002 </string> Save and Exit Go to AMDRadeonX3000.kext and rightclick and choose Show Package Contents and open info.plist with textedit. Find <key>AMDCedarGraphicsAccelerator</key> and then look for the first <key>IOPCIMatch</key> and add your string for HD5450 ( HD5450 1GB the string is 0x68F91002 and for 512MB the string is 0x68E11002) add <string>0x68F91002 0x68E01002</string> Save and Exit Install both kext files with Kext Utility Now reboot. After Reboot the video card must be working with QE/CI. 14. Update to 10.9.2 Don't update thru Software Update download the combo update here Download from the apple site. Run the 10.9.2 combo update walk thru the steps. After installation there will be a message saying to restart your system, CHOOSE RESTART. The Combo Update will be installed on the system and will take about 10 minutes After the install the system boots up normally but video isn't working anymore we will fix this manually like in chapter 13 Copy the Kext files AMD5000Controller.kext and AMDRadeonX3000.kext from system/library/extension to your desktop. Go to AMD5000Controller.kext and rightclick and choose Show Package Contents and open info.plist with textedit. Find <key>IOPCIMatch</key> and add your string for HD5450 ( HD5450 1GB the string is 0x68F91002 and for 512MB the string is 0x68E11002) <string>0x68F91002 0x68981002 0x68991002 0x68E01002 0x68E11002 0x68D81002 0x68C01002 0x68C11002 0x68D91002 0x68B81002 0x68B01002 0x68B11002 0x68A01002 0x68A11002 </string> Save and Exit Go to AMDRadeonX3000.kext and rightclick and choose Show Package Contents and open info.plist with textedit. Find <key>AMDCedarGraphicsAccelerator</key> and then look for the first <key>IOPCIMatch</key> and add your string for HD5450 ( HD5450 1GB the string is 0x68F91002 and for 512MB the string is 0x68E11002) add <string>0x68F91002 0x68E01002</string> Save and Exit Install both kext files with Kext Utility Now reboot. After Reboot go to about this Mac and check if the version is 10.9.2 The update is finished. TROUBLESHOOTING 14. BOOT 0 ERROR If you are using a 4k HDD you can get boot:0 error, to solve this issue do the following Reboot system back into Mavericks installer (USB)FLASH DRIVE). Run Disk Utility find the Disk Identifier (eg. disk0s2). Unmount the drive you installed Mavericks on Launch Terminal and execute the following command: dd if=/usr/standalone/i386/boot1h of=/dev/disk0s2 Exit Terminal Boot Normally 15. App store and iCloud doesn't work If AppStore and iCloud doesn't work follow the steps below. Open up EFI Studio in folder “Install109 - Utils.” , select Ethernet, select Add Device. On the new window you will see a lot of numbers (Hex String) in the second row. Then clicked write to com.apple.boot.plist. Then go to /Library/Preferences/SystemConfiguration/apple.com.boot.plist and select the new key and string it added. Now you can add the Hex Strings to your org.chameleon.boot.plist(com.apple.boot.plist) see Chapter 12 which should be in root/extra folder. When you add it manually make sure it is in <key>device-properties</key> <string>Your Hex String here</string> arguments after that. Remove all network devices from System Preferences/Network. Delete in library>preferences>system configuration> NetworkInterfaces.plist file. Finally, Reboot. After reboot, go to System Preferences/Network add devices. Click (Ethernet) FIRST!! Then add the other adapters you use to connect to the internet or Bluetooth. Voila. App Store and iCloud now works. 16. iMessage Fix Hackintoshes have been unable to log into the Messages app (better known as "iMessage") on OS X Mountain Lion and Mavericks. We can now fix the problem using Chameleon bootloader. Run the Chameleon installation package from Install - Utils. Make sure to install this package to your HDD. Choose in the Chameleon setup for Customize, in the customize screen choose Modules – FileNVRAM after that go further with the install of Chameleon Finally, Reboot Voila. iMessage now works 17. If sound doesn’t work The HDMI from the Ati Radeon 5450 doesn’t work properly so we need to change this to Headphone, follow the step below to make sound work. Open System Preferences – Sound – Output – And choose for Headphones. 18. Finished! You’ve successfully installed OSX Mavericks onto your Dell Optiplex 780. run os x mavericks 10.9.pdf
×