blackwalker Posted May 15, 2019 Share Posted May 15, 2019 in the bios i dont have: Peripherals → Intel(R)Bios Guard → Intel BIOS Guard Support → Disable and in your bios settings you write: Chipset → DVMT Pre-Allocated → 256M but its: Chipset → DVMT Pre-Allocated → 64M the only thing i can do is reset and set again all bios settings with only this changed: Chipset → DVMT Pre-Allocated → 64M Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/8/#findComment-2673692 Share on other sites More sharing options...
glasgood Posted May 15, 2019 Author Share Posted May 15, 2019 1 minute ago, blackwalker said: in the bios i dont have: Peripherals → Intel(R)Bios Guard → Intel BIOS Guard Support → Disable and in your bios settings you write: Chipset → DVMT Pre-Allocated → 256M but its: Chipset → DVMT Pre-Allocated → 64M the only thing i can do is reset and set again all bios settings with only this changed: Chipset → DVMT Pre-Allocated → 64M Go with Chipset → DVMT Pre-Allocated → 64M and all other BIOS settings 1 Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/8/#findComment-2673694 Share on other sites More sharing options...
blackwalker Posted May 15, 2019 Share Posted May 15, 2019 Trying now! I see that your bios used is F5, now its F9 lets see now!! Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/8/#findComment-2673695 Share on other sites More sharing options...
glasgood Posted May 15, 2019 Author Share Posted May 15, 2019 1 minute ago, blackwalker said: Trying now! I see that your bios used is F5, now its F9 lets see now!! I'm sticking with F5, no reason to update as yet. 1 Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/8/#findComment-2673697 Share on other sites More sharing options...
blackwalker Posted May 15, 2019 Share Posted May 15, 2019 (edited) Same error... coffe pause, i’ll try later dunno what to try now... no fakesmc? what else i can try? i’m lost.... Edited May 15, 2019 by blackwalker Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/8/#findComment-2673698 Share on other sites More sharing options...
glasgood Posted May 15, 2019 Author Share Posted May 15, 2019 1 minute ago, blackwalker said: Same error... coffe pause, i’ll try later dunno what to try now... I'm testing another USB Mojave Intel installer for 10.14.5 Will be ready later. 1 Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/8/#findComment-2673699 Share on other sites More sharing options...
blackwalker Posted May 15, 2019 Share Posted May 15, 2019 8 minutes ago, glasgood said: I'm testing another USB Mojave Intel installer for 10.14.5 Will be ready later. Cool thx hope to have some chance to install mojave Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/8/#findComment-2673705 Share on other sites More sharing options...
glasgood Posted May 15, 2019 Author Share Posted May 15, 2019 49 minutes ago, blackwalker said: Cool thx hope to have some chance to install mojave Hi, Find attached new PRE-INSTALL Aorus Pro Z390 EFI - Intel UHD630.zip Clover v4920 can confirm this is fully working with macOS Mojave 10.14.5. Remember during install, on each reboot, you have to press F12 and boot from installer and continue...such as... Boot macOS Install from Macintosh etc. 1 Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/8/#findComment-2673713 Share on other sites More sharing options...
blackwalker Posted May 15, 2019 Share Posted May 15, 2019 Just now, glasgood said: Hi, Find attached new PRE-INSTALL Aorus Pro Z390 EFI - Intel UHD630.zip Clover v4920 can confirm this is fully working with macOS Mojave 10.14.5. Remember during install, on each reboot, you have to press F12 and boot from installer and continue...such as... Boot macOS Install from Macintosh etc. Wow thx I'll check it now! there is no "nvram.plist" is ok? what about "MacMini8,1 SMBIOS so it'll use iGP" or is ok? Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/8/#findComment-2673716 Share on other sites More sharing options...
glasgood Posted May 15, 2019 Author Share Posted May 15, 2019 3 minutes ago, blackwalker said: Wow thx I'll check it now! there is no "nvram.plist" is ok? what about "MacMini8,1 SMBIOS so it'll use iGP" or is ok? Working, it's pre-install, don't need to worry. 1 Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/8/#findComment-2673717 Share on other sites More sharing options...
blackwalker Posted May 15, 2019 Share Posted May 15, 2019 ok I have only to replace the EFI and try again Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/8/#findComment-2673718 Share on other sites More sharing options...
glasgood Posted May 15, 2019 Author Share Posted May 15, 2019 (edited) 15/05/2019 Aorus Pro Z390 EFI - Intel UHD630 Update version 4871 to 4920 PRE-INSTALL Aorus Pro Z390 EFI - Intel UHD630 now Clover v 4920 POST-INSTALL Aorus Pro Z390 EFI - Intel UHD630 now Clover v 4920 15 minutes ago, blackwalker said: ok I have only to replace the EFI and try again Yes Edited May 15, 2019 by glasgood Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/8/#findComment-2673721 Share on other sites More sharing options...
blackwalker Posted May 15, 2019 Share Posted May 15, 2019 Same error but I capture the log and say: “disk25s1 is not convertible to APFS: you can’t install on this volume because can’t be trasformed in Apple File System (APFS) “ dunno if it refer to the ssd that i erase and format correctly in APFS as you suggested or it refer to the usb??! I can do a video of the log if you like or it’s ok these screenshot? Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/8/#findComment-2673725 Share on other sites More sharing options...
blackwalker Posted May 15, 2019 Share Posted May 15, 2019 (edited) I format the ssd in classic file sistem, same error I captured 2 screenshots that talk about: ”No native mechanism to verify InstallESD...” etc... Edited May 15, 2019 by blackwalker Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/8/#findComment-2673726 Share on other sites More sharing options...
glasgood Posted May 15, 2019 Author Share Posted May 15, 2019 14 minutes ago, blackwalker said: Same error but I capture the log and say: “disk25s1 is not convertible to APFS: you can’t install on this volume because can’t be trasformed in Apple File System (APFS) “ dunno if it refer to the ssd that i erase and format correctly in APFS as you suggested or it refer to the usb??! I can do a video of the log if you like or it’s ok these screenshot? Try, physically remove all drives (m2 970 samsung, 2tb crucial ) from motherboard, have just the Samsung 860 EVO connected. So only have the Samsung 860 EVO connected to Motherboard. and remove 16GB of memory. Also: Ensure Above 4G Decoding is set to disabled in the BIOS And retry installation. Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/8/#findComment-2673727 Share on other sites More sharing options...
blackwalker Posted May 15, 2019 Share Posted May 15, 2019 4 minutes ago, glasgood said: Try, physically remove all drives (m2 970 samsung, 2tb crucial ) from motherboard, have just the Samsung 860 EVO connected. So only have the Samsung 860 EVO connected to Motherboard. and remove 16GB of memory. Also: Ensure Above 4G Decoding is set to disabled in the BIOS And retry installation. ok i can try this, later! anyway, - Above 4G Decoding is set to disabled - what about the other error message like "”No native mechanism to verify InstallESD.dmg” and so on? thanks a lot for your time and patience Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/8/#findComment-2673729 Share on other sites More sharing options...
glasgood Posted May 15, 2019 Author Share Posted May 15, 2019 (edited) 13 minutes ago, blackwalker said: ok i can try this, later! anyway, - Above 4G Decoding is set to disabled - what about the other error message like "”No native mechanism to verify InstallESD.dmg” and so on? thanks a lot for your time and patience In past, I've had similar problem at same state of install and it was because Above 4G Decoding was enabled. Also on another occasion, same stage during installation was because I tried to install onto an old WD black SATA drive, when drive was replaced the install was good. But first, try removing parts that I mentioned. Then if problem persists, would try and use another USB flash drive for Mojave Installer. Edited May 15, 2019 by glasgood Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/8/#findComment-2673730 Share on other sites More sharing options...
blackwalker Posted May 15, 2019 Share Posted May 15, 2019 35 minutes ago, glasgood said: In past, I've had similar problem at same state of install and it was because Above 4G Decoding was enabled. Also on another occasion, same stage during installation was because I tried to install onto an old WD black SATA drive, when drive was replaced the install was good. But first, try removing parts that I mentioned. Then if problem persists, would try and use another USB flash drive for Mojave Installer. 4G decoding is disabled Removing all ssd and ram is ok but take some times trying another usb always 2.0 I suppose? i can do it before removing all ssd and ram Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/8/#findComment-2673737 Share on other sites More sharing options...
blackwalker Posted May 15, 2019 Share Posted May 15, 2019 (edited) 56 minutes ago, glasgood said: In past, I've had similar problem at same state of install and it was because Above 4G Decoding was enabled. Also on another occasion, same stage during installation was because I tried to install onto an old WD black SATA drive, when drive was replaced the install was good. But first, try removing parts that I mentioned. Then if problem persists, would try and use another USB flash drive for Mojave Installer. 4G decoding is disabled (On other guide I read someone suggest enabled, but your guide is perfect and really good, one of the best i see!! And I want use it) Removing all ssd and ram is ok but take some times trying another usb always 2.0 I suppose? i can do it before removing all ssd and ram Removed ssd (not ram) and trying now hope... a new hope... the ssd is not on sata 0 or 1 Edited May 15, 2019 by blackwalker Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/8/#findComment-2673739 Share on other sites More sharing options...
blackwalker Posted May 15, 2019 Share Posted May 15, 2019 (edited) Ho well, it make more operation on log but exit for the same reason..! i didnt remove the 16gb of ram, i’ll try removing ram, but why?? I hope then I can put it removed ram set ssd to sata 0 trying now.... Edited May 15, 2019 by blackwalker Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/8/#findComment-2673743 Share on other sites More sharing options...
glasgood Posted May 15, 2019 Author Share Posted May 15, 2019 (edited) 18 minutes ago, blackwalker said: Ho well, it make more operation on log but exit for the same reason..! i didnt remove the 16gb of ram, i’ll try removing ram, but why?? I hope then I can put it back Past experience, having more than 16gb of ram or ram seated in certain memory slots can cause problem.. idkw. That's why I have indicated in guide, the slots that I have memory seated in. Do you have another SSD to test install with. Today I successfully used updated PRE & POST INSTALL Aorus Pro Z390 EFI - Intel UHD630 for installing macOS Mojave 10.14.5 without problem. I'm puzzled why install is not going smoothly for you. Edited May 15, 2019 by glasgood Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/8/#findComment-2673745 Share on other sites More sharing options...
glasgood Posted May 15, 2019 Author Share Posted May 15, 2019 2 hours ago, blackwalker said: I can do a video of the log if you like or it’s ok these screenshot? From logs I can see: MountedVolumesCount = 24 disk25s1 ? That seems a lot of volumes, and likely cause of installation problem. Definitely want to remove extra drives and have only one drive that you intend to use for installing macOS Mojave onto. Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/8/#findComment-2673749 Share on other sites More sharing options...
blackwalker Posted May 15, 2019 Share Posted May 15, 2019 (edited) - removed 16gb of ram - removed all ssd - left only one on sata 0 nothing... same error with MountedVolumesCount = 21 I think the problem is the USB or what I do while creating it I'll create a new USB and try again with all ssd and ram and see... wondering how can count 24 or 21 volumes....thats really strange! In disk util before formatting the only ssd mounted I have the ssd, the usb and the installation ESD of OS. Edited May 15, 2019 by blackwalker Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/8/#findComment-2673753 Share on other sites More sharing options...
mfortuna Posted May 15, 2019 Share Posted May 15, 2019 @glasgood Just updated to the latest EFI you uploaded, still no sleep. When I press the sleep button in the Apple menu, the screen goes off but the fans and the leds of the motherboard stay on. Maybe It has to do with my BIOS version? I updated to F9 because the trouble I had with the XPG SSD. Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/8/#findComment-2673754 Share on other sites More sharing options...
glasgood Posted May 15, 2019 Author Share Posted May 15, 2019 5 minutes ago, mfortuna said: @glasgood Just updated to the latest EFI you uploaded, still no sleep. When I press the sleep button in the Apple menu, the screen goes off but the fans and the leds of the motherboard stay on. Maybe It has to do with my BIOS version? I updated to F9 because the trouble I had with the XPG SSD. Do you have the following set in BIOS: MIT → Smart Fan 5 Settings → CPU Fan Control mode → PWM Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/8/#findComment-2673756 Share on other sites More sharing options...
Recommended Posts