Jump to content

[Guide] El Capitan, Sierra / High Sierra / Mojave / Catalina on Intel 5, 6, 7, 8, 9 Chipset Series / Nehalem, SandyBridge, IvyBridge, Haswell, Broadwell


2509 posts in this topic

Recommended Posts

Hi MaLdOn

 

Would really appreciate it if you could have a look at my set up. Running macOS High Sierra dual boot with Windows 10 on one drive.

Clover themes folder has been removed to reduce size.

 

CPU: Intel i7 4790K

MB: Gigabyte GA-Z97X-UD5H-BK

Drive: Samsung PM951 1TB M.2 SSD on PCIe adapter

Memory: Corsair 16GB (4X4GB) DDR3 1600MHz

Graphics: Nvidia Geforce GTX 750Ti 

Sound: ALC1150 and Nvidia HDMI

Display: Samsung U24E850 

 
Thanks and kind regards.

gcc1 _runme.zip

gcc1_CLOVER .zip

gcc1_ioreg.zip

  • Like 1

 

Hi MaLdOn

 

Would really appreciate it if you could have a look at my set up. Running macOS High Sierra dual boot with Windows 10 on one drive.

Clover themes folder has been removed to reduce size.

 

CPU: Intel i7 4790K

MB: Gigabyte GA-Z97X-UD5H-BK

Drive: Samsung PM951 1TB M.2 SSD on PCIe adapter

Memory: Corsair 16GB (4X4GB) DDR3 1600MHz

Graphics: Nvidia Geforce GTX 750Ti 

Sound: ALC1150 and Nvidia HDMI

Display: Samsung U24E850 

 
Thanks and kind regards.

 

Replace full folder, don't change nothing

CLOVER.zip

reboot

send me new ioreg

  • Like 2

Hey mate i'm in troubles again, i've installed 10.13.3 update, everything went fine but then i've installed new version of nvidia web driver and after reboot i now have a black screen on both monitors... i really don't understand the reason why my builds are always full of troubles even if i always try to do all the correct configurations...  :(  :(  :(

  • Like 2

HighSierra 10.13.3 or 10.13.4 beta

1- Install driver(Thanks fantomas1 and Micky1979)

InsanelyMacWebDriver(OsxBuild_17C205)-378.10.10.10.25.104.pkg.zip

-Reboot

2- Run my .command

NvidiaPatcherHS.command.zip

 

or

 

2a- add info in NVDAStartupWeb.kext

Check here

01.png

Add here

02.png

Kext mod for 10.13.4 Beta (17E139j)

NVDAStartupWeb.kext.zip

  • Like 8

if don't work good with driver above, use it

-Install it(Thanks fantomas1 and Micky1979)

attachicon.gifInsanelyMacWebDriver(OsxBuild_17C205)-378.10.10.10.25.104.pkg.zip

-Reboot

-Run it (Thanks gengik84)

attachicon.gifNvWeb_Patcher.zip

 

Once again you saved the day, that version works like a charms. Thanks a lot  :D  :D

Hey mate i'm in troubles again, i've installed 10.13.3 update, everything went fine but then i've installed new version of nvidia web driver and after reboot i now have a black screen on both monitors... i really don't understand the reason why my builds are always full of troubles even if i always try to do all the correct configurations...  :(  :(  :(

The same happened to me: all my 3 screens are active but only show a black image...

 

I've even removed my old driver and reinstalled the new one twice, but the same bad result. :(

 

I'm now with the previous one.

 

Boa sorte,

Paulo

Replace full folder, don't change nothing

attachicon.gifCLOVER.zip

reboot

send me new ioreg

 

Hi again MaLdOn.

 

Thanks for the super quick response. Installed new Clover folder and boot time is now blistering fast, thank you so much!

 

Attached files as requested.

IORegistry.zip

Send me gcc1.zip

  • Like 1

Hi again MaLdOn.

 

Thanks for the super quick response. Installed new Clover folder and boot time is now blistering fast, thank you so much!

 

Attached files as requested.

test all ports usb3 with one device usb3(hdd external usb3 or usbstick usb3)

u have a hub usb? i see in RP04, i dont identify device

  • Like 1

test all ports usb3 with one device usb3(hdd external usb3 or usbstick usb3)

u have a hub usb? i see in RP04, i dont identify device

 

Hi again.

 

All USB 3.0 ports tested and working fine. I think the USB hub is the Renesas USB 3.0 hub which is part of the motherboard chipset and connects to the 4 upper USB 3 ports at the back.

 

The RP04 device maybe a satellite TV card in a PCI slot which I use with Windows.

 

Hope that makes sense and thanks again.

  • Like 1

Hi again.

 

All USB 3.0 ports tested and working fine. I think the USB hub is the Renesas USB 3.0 hub which is part of the motherboard chipset and connects to the 4 upper USB 3 ports at the back.

 

The RP04 device maybe a satellite TV card in a PCI slot which I use with Windows.

 

Hope that makes sense and thanks again.

Yes!

Enjoy!

  • Like 1

Hello Mald0n quick question, there is a security update for sierra and i read somewhere that u have to update lilu kext before doing the update, i am using your clover folder, do i have to update lilu?

 

Thanks

Things now running very fast and smooth. Thank you so much for helping me out!

 

All the best.

Thx, same to u!

Enjoy ur Hack!

Hello Mald0n am gonna bother you again, here are my files, please help me out, thanks in advance

 

https://mega.nz/#!PgtEDbpL!mzTe0y_-tuk2diS02x5KpfhW57xQmK7gpUrOmbF-QBI

what mobo?

is a same mobo? if yes, u can use previous file ;)

×
×
  • Create New...