Raffhell Posted November 7, 2016 Share Posted November 7, 2016 Hi I'd like to try ELC 10.11.6 Boot loader works, but it hangs with kernel panic (-x -f -v flags tried), as kernel provided is intel only. I grabbed already 10.11.6 kernel (in dev) but I'm not sure where I should put files, or I if I can load with clover without overwriting the stock one, copying files in usb pen. Link to comment Share on other sites More sharing options...
Paul Polidoro Posted November 18, 2016 Share Posted November 18, 2016 Good morning guys What kernel could I use to install el capitan on my AMD phenon II x4 965? Following the shaneee tutorial I had kernel panic and I could not at all Link to comment Share on other sites More sharing options...
BuIlDaLiBlE Posted November 19, 2016 Share Posted November 19, 2016 Does the RC4 kernel work with 10.11.6? Link to comment Share on other sites More sharing options...
Shaneee Posted November 19, 2016 Share Posted November 19, 2016 Does the RC4 kernel work with 10.11.6? Yes. Link to comment Share on other sites More sharing options...
BuIlDaLiBlE Posted November 19, 2016 Share Posted November 19, 2016 Yes. Great then, I'll update from 10.11.5. Link to comment Share on other sites More sharing options...
Shaneee Posted November 19, 2016 Share Posted November 19, 2016 Great then, I'll update from 10.11.5. Make a backup first incase the update breaks something and remember to replace the kernel after the update. Link to comment Share on other sites More sharing options...
Paul Polidoro Posted November 21, 2016 Share Posted November 21, 2016 Good morning I installed el capitan 10.11.6 all ok, but I'm having some errors;The mouse does not work, but the keyboard works normally, and my GPU is nVidia GT440 which also does not work, I tried using GraphicsEnabler=Yes but without success, so I'm using nv_disable=1 to boot. Has anyone seen these things yet? Any tips? Link to comment Share on other sites More sharing options...
dj_just Posted November 21, 2016 Share Posted November 21, 2016 Hello. I successfully installed OS but with kernel Shaneee 10.11.* RC4, and install Clover bootloader v 3923, but then i trying boot i get this error. If a booting with enorch bootloader all work good but i can't activate my video card HD 5650 , but in kext i have dev id for it , and booting with GraphicsEnabler = Yes flag. Someone can help me with my problem. How i can make work my video card in Enorch or correctly booting from Clover. Link to comment Share on other sites More sharing options...
spakk Posted November 21, 2016 Share Posted November 21, 2016 Hello. I successfully installed OS but with kernel Shaneee 10.11.* RC4, and install Clover bootloader v 3923, but then i trying boot i get this error. If a booting with enorch bootloader all work good but i can't activate my video card HD 5650 , but in kext i have dev id for it , and booting with GraphicsEnabler = Yes flag. Someone can help me with my problem. How i can make work my video card in Enorch or correctly booting from Clover. Which CPU and mainboard are in use? Link to comment Share on other sites More sharing options...
dj_just Posted November 22, 2016 Share Posted November 22, 2016 Which CPU and mainboard are in use? Phenom II n930 mainboard is new75 la-5911p rev 1.0. This is Notebook Acer 5551G Link to comment Share on other sites More sharing options...
spakk Posted November 22, 2016 Share Posted November 22, 2016 Please upload your Extra folder or your EFI folder. In addition, export a dsdt from your system and upload this as well. Link to comment Share on other sites More sharing options...
dj_just Posted November 22, 2016 Share Posted November 22, 2016 Please upload your Extra folder or your EFI folder. In addition, export a dsdt from your system and upload this as well. I uploaded it https://drive.google.com/file/d/0BwMQtr6l3u9DMmtBcEdKV21oTTA/view?usp=sharing Link to comment Share on other sites More sharing options...
spakk Posted November 22, 2016 Share Posted November 22, 2016 The main problem is your Ati Mobility Radeon HD 5650 read this post: http://olarila.com/forum/viewtopic.php?f=27&t=4225 or this here: http://www.insanelymac.com/forum/topic/248751-mobility-radeon-hd-5650-qeci-work-262-update/ your clover configuration is not correct and incomplete. First, install Enoch bootloader, then add the contents of my folder in your extra folder, then test with these configuration. Extra.zip Link to comment Share on other sites More sharing options...
dj_just Posted November 22, 2016 Share Posted November 22, 2016 The main problem is your Ati Mobility Radeon HD 5650 read this post: http://olarila.com/forum/viewtopic.php?f=27&t=4225 or this here: http://www.insanelymac.com/forum/topic/248751-mobility-radeon-hd-5650-qeci-work-262-update/ your clover configuration is not correct and incomplete. First, install Enoch bootloader, then add the contents of my folder in your extra folder, then test with these configuration. All started , but i have now Black Screen Link to comment Share on other sites More sharing options...
BuIlDaLiBlE Posted November 23, 2016 Share Posted November 23, 2016 Now, this happens after updating to 10.11.6. It just hangs at it. Nevermind, I shouldn't have replaced System.kext. Link to comment Share on other sites More sharing options...
spakk Posted November 23, 2016 Share Posted November 23, 2016 All started , but i have now Black Screen Try another setting for the graphic card: AtiConfig = Eulemur or Hoolock or what else.. please read the two sides. Link to comment Share on other sites More sharing options...
BuIlDaLiBlE Posted November 24, 2016 Share Posted November 24, 2016 Right. So I have this problem. If I restart normally then my PC won't start. Motherboard will just do that looping click and the PC is basically useless until I reset the CMOS (take the battery out). If I hold the power button and force to shut down and then boot again it's okay, but not when this whole thing fks up (motherboard clicking). So I think this has to do something with kexts after update because this wasn't an issue with 10.11.5. Any tips here? I forgot that's an AppleRTC issue... And about security updates... is it safe to install them? I know they aren't neccessary but still, is it okay? P.S. Chrome seems to be fixed on 10.11.6, glad that's gone. Link to comment Share on other sites More sharing options...
dj_just Posted November 24, 2016 Share Posted November 24, 2016 Try another setting for the graphic card: AtiConfig = Eulemur or Hoolock or what else.. please read the two sides. I read both and nothing help me , i try to change FB with patch binary file , but this also not worked for me , and again i see only a black screen Link to comment Share on other sites More sharing options...
spakk Posted November 24, 2016 Share Posted November 24, 2016 I read both and nothing help me , i try to change FB with patch binary file , but this also not worked for me , and again i see only a black screen Try using GraphicsEnabler=Yes or GraphicsEnabler=No and read here, maybe it can help you to solve the problem. http://www.insanelymac.com/forum/topic/250905-finally-qeci-on-mobility-5650/page-2 Link to comment Share on other sites More sharing options...
dj_just Posted November 25, 2016 Share Posted November 25, 2016 Try using GraphicsEnabler=Yes or GraphicsEnabler=No and read here, maybe it can help you to solve the problem. http://www.insanelymac.com/forum/topic/250905-finally-qeci-on-mobility-5650/page-2 Trying it but nothung changed , only works External monitor via VGA. Notebook screen black. Link to comment Share on other sites More sharing options...
BuIlDaLiBlE Posted December 2, 2016 Share Posted December 2, 2016 Installed Security Update 2016-002. Everything went smoothly. Now waiting for macOS 10.12 kernel release (non-FX) Link to comment Share on other sites More sharing options...
ilyakaru Posted December 18, 2016 Share Posted December 18, 2016 Hey guys. For a week i'm reading this forum and trying to install El Capitan 10.11.2 on a such mashine: CPU: AMD A10 7870k MoBo: Asus a88xm-a DDR3: Kingston HyperX Savage 8g / Slot 1 SSD: Smartbuy Revival [sB120GB-RVVL-25SAT3] HDD: WDC WD3200AAJS-22B4A0 (298 gb) Video: ASUS GeForce GTX 950 [GTX950-2G] using Shaneee-10.11.x-RC4 kernel + kexts usb fixes + Enoch latest version and i'm stuck on such error: 'hfs: set VeryLowDisk: vol:untitled, freeblks: 0, dangerlimit:12' usb drive has 9 gb of free space, HDD and SSD has no errors. USB was created in VMware with Yosemite 10.10.5. I saw few posts about this error but no mention of fixes. Spakk sent private message to guy (nick: @Zenshredder) with same error, and this guy didn't tell any result after. So guys is it real to run mac os x on my mashine? Forgot to mention boot flags. They are:-f -v -x nv_disable=1 kext-dev-mode=1 /amd1 and /amd64 npci=0x3000 and 2000 graphicsenabler=yes|no all cause same error. Kp with dsdt.aml no errors/warnings in it Link to comment Share on other sites More sharing options...
ilyakaru Posted December 20, 2016 Share Posted December 20, 2016 Anybody can help? Is anybody here? Link to comment Share on other sites More sharing options...
spakk Posted December 21, 2016 Share Posted December 21, 2016 Hey guys. For a week i'm reading this forum and trying to install El Capitan 10.11.2 on a such mashine: CPU: AMD A10 7870k MoBo: Asus a88xm-a DDR3: Kingston HyperX Savage 8g / Slot 1 SSD: Smartbuy Revival [sB120GB-RVVL-25SAT3] HDD: WDC WD3200AAJS-22B4A0 (298 gb) Video: ASUS GeForce GTX 950 [GTX950-2G] using Shaneee-10.11.x-RC4 kernel + kexts usb fixes + Enoch latest version and i'm stuck on such error: 'hfs: set VeryLowDisk: vol:untitled, freeblks: 0, dangerlimit:12' usb drive has 9 gb of free space, HDD and SSD has no errors. USB was created in VMware with Yosemite 10.10.5. I saw few posts about this error but no mention of fixes. Spakk sent private message to guy (nick: @Zenshredder) with same error, and this guy didn't tell any result after. So guys is it real to run mac os x on my mashine? Forgot to mention boot flags. They are: -f -v -x nv_disable=1 kext-dev-mode=1 /amd1 and /amd64 npci=0x3000 and 2000 graphicsenabler=yes|no all cause same error. Kp with dsdt.aml no errors/warnings in it For all users who are looking for a solution to fix this problem. This hint ===> hfs: set VeryLowDisk: vol: untitled, freeblks: 0, dangerlimit: 12 ' This means that the partition is either almost full, and the memory space should be increased by moving data that not needed, or moving it to another HDD so that this error does not occur again at the next boot. .... so you have to check the partition or hard drive or USB flash disk and, if necessary, give free disk space. If necessary, you can disconnect the HDD / USB Flash disk (if not OS X is installed) from the system. Then your system should boot normally. ....so no panic Edit: sometimes can be caused the problem by the USB flash disk, then use another USB Flash Disk with minimum 10 GB size Link to comment Share on other sites More sharing options...
Neo.aka.Darkman Posted January 2, 2017 Share Posted January 2, 2017 @Shaneee, hi! I want to try to install El Capitan on desktop (Athlon X2 270, HD6670) with your RC4 kernel. As I've understand kernel needs custom System.kext. My question is what additional boot-arguments do I need? Is there any key for CPUs without SSSE3 support (I'm currently using Lion with kernel what has -nossse3bit argument)? Thanks in advance! Link to comment Share on other sites More sharing options...
Recommended Posts