Jump to content

Ozmosis

xpamamadeus

By xpamamadeus,
in Ozmosis

 Share
6234 posts in this topic

Recommended Posts

Recommended

Posted by THe KiNG,

SINCE SOMEBODY PUBLISHED THE SOURCE CODE WITHOUT OUR PERMISSION I ANOUNCE HERE THAT ANY USE OF THE CODE IN PART OR IN WHOLE IS ILLEGAL AND ACTIONS IN COURT WILL BE MADE AGAINST STLVNUB USER THAT WAS THE SOURCE OF THE LEAKED SOURCE EVEN WE HAD A VERY CLEAR STATEMENT THAT HE CANNOT DO THIS, AND THE OTHER WHO USE THE CODE AND ALREADY PUBLISHED BINARIES HERE ON THIS FORUM AND OTHER FORUMS. LET ME BE VERY CLEAR: OZMOSIS WAS, IS AND IT WILL REMAIN CLOSED SOURCE. NO FUTHER RELEASES WILL BE MADE AN
Recommended by Allan
  • Haha
  • Like

4 reactions

Go to this post
mhaeuser
mhaeuser
Posted
Posted

No, it is not related to Oz only. DSDT patching is DSDT patching and not Ozmosis setup/discussion.

The snippet you pasted is not a DSDT patch but a SSDT. You can either load the SSDT from the Acpi/Load folder, ot you can paste the changes into your DSDT. What you do is up to you.

mhaeuser
mhaeuser
Posted
Posted

You need to find the HDEF device in your DSDT and copy+paste the contests of the SSDT's HDEF in there. There is more to it, but for now think of a SSDT as an injector... when DSDT and SSDT are loaded, it is the same as if the SSDT's code was in the DSDT tree. If you want to merge them, you need to merge the blocks, not plainly copy+paste wherever you want.

cecekpawon
cecekpawon
Posted
Posted

Reasons is to fit my nvidia (gtx650 w/ 3) ports or it will panic every reboot. DisableNvidaInjection = true also broken, turn black before login screen. I thought it caused by default injected aapl,boot-display set to 0, switch to another port still black. I guess ppl survive from this problem by using official nvidia driver which i dont like it. King said Oz not for mobile, in fact they use "01660001" as default ig-platform-id to my hd 4000. With LVDS on 1st port? I preffered to use "0166000a" with my igpu and i want to set it with dev-prop. Setvar / nvram / plist AAPL,ig-platform-id to 1F8E0C02-58A9-4E34-AE22-2B63745FA101 cause panic. As well they dont let me set layout-id for my ALC892. Same Z77 as QUO (i use sabertooth), difficult to setup, harder than i imagine. Now, still using chip with Oz on it & boot with Clover from usb stick and guess what? They also prevent Clover to inject device properties, so sad @DxF (((

010066010103040300000006 ==> Platform-ID: 01006601 | Port: 03 | *FBMem: 03 | StolenMemSize: 00000006 (96Mb)
000080010000006010070000 ==> FBMemSize: 00008001 (24Mb)
100700000000000000000000
00000000704f030000000000
010000000200000030000000 ==> Index: 01 | Port: 00 | *Pipe: 00 | ConnType: 02000000 | ConnAtts: 30000000 | LVDS
020500000008000006000000 ==> Index: 02 | Port: 05 | *Pipe: 00 | ConnType: 00080000 | ConnAtts: 06000000 | HDMI
030400000004000007010000 ==> Index: 03 | Port: 04 | *Pipe: 00 | ConnType: 00040000 | ConnAtts: 07010000 | DP
040600000004000007010000 ==> Index: 04 | Port: 06 | *Pipe: 00 | ConnType: 00040000 | ConnAtts: 07010000 | DP
020000001100110000000000
mathew2005in
mathew2005in
Posted
Posted

Oh Ok I think I got the point...I have to replace only the HDEF definition block with toleda patch in DSDT right ?...also by loading SSDT from Acpi/Load folder will inject Audio layout without adding anything in default.plist am I right?

 

Thanks

m0no
m0no
Posted
Posted

 

Reasons is to fit my nvidia (gtx650 w/ 3) ports or it will panic every reboot. DisableNvidaInjection = true also broken, turn black before login screen. I thought it caused by default injected aapl,boot-display set to 0, switch to another port still black. I guess ppl survive from this problem by using official nvidia driver which i dont like it. King said Oz not for mobile, in fact they use "01660001" as default ig-platform-id to my hd 4000. With LVDS on 1st port? I preffered to use "0166000a" with my igpu and i want to set it with dev-prop. Setvar / nvram / plist AAPL,ig-platform-id to 1F8E0C02-58A9-4E34-AE22-2B63745FA101 cause panic. As well they dont let me set layout-id for my ALC892. Same Z77 as QUO (i use sabertooth), difficult to setup, harder than i imagine. Now, still using chip with Oz on it & boot with Clover from usb stick and guess what? They also prevent Clover to inject device properties, so sad @DxF (((

010066010103040300000006 ==> Platform-ID: 01006601 | Port: 03 | *FBMem: 03 | StolenMemSize: 00000006 (96Mb)
000080010000006010070000 ==> FBMemSize: 00008001 (24Mb)
100700000000000000000000
00000000704f030000000000
010000000200000030000000 ==> Index: 01 | Port: 00 | *Pipe: 00 | ConnType: 02000000 | ConnAtts: 30000000 | LVDS
020500000008000006000000 ==> Index: 02 | Port: 05 | *Pipe: 00 | ConnType: 00080000 | ConnAtts: 06000000 | HDMI
030400000004000007010000 ==> Index: 03 | Port: 04 | *Pipe: 00 | ConnType: 00040000 | ConnAtts: 07010000 | DP
040600000004000007010000 ==> Index: 04 | Port: 06 | *Pipe: 00 | ConnType: 00040000 | ConnAtts: 07010000 | DP
020000001100110000000000

http://www.insanelymac.com/forum/topic/291655-ozmosis/page-182?do=findComment&comment=2210406

cecekpawon
cecekpawon
Posted
Posted

Hey @m0no thanks to you! I just copy pasting from @tuxuser readme / @pavo guide before ))

I can boot with my gtx right now with DisableNvidiaInjection = true & rename my gpu device.

Do you know how to get efi strings injection to be working (dev-prop.bin)?

We should have this lines in log right? But i dont

"dev-prop.bin"
"Loading %s%s v%d %d Bytes Contains %d devices - %r\n"
"Adding Device with %d Properties\n"
WinstonAce
WinstonAce
Posted
Posted

Hi

I have a little problem, I guess it's SMBIOS related

when I use Ozmosis (latest) and trying to load Borderlands 2 I get this message 

Screen_Shot_2016_03_24_at_18_14_17.jpg

with clover I don't get this message

attached my smbios dumps from clover and ozmosis

what should I add to my default.plist to sort it out?

 

Thanks

SMBIOS_CLOVER.txt

SMBIOS_OZ.txt

pmcnano
pmcnano
Posted
Posted

Really not sure if post it here or in AppleALC thread, guess its more ozmosis related. For some reason in 1 (of 5) ozmosis builds, if I copy AppleALC to /EFI/OZ/Darwin/Extensions/Common the computer wont boot osx. 

 

Shows gigabyte logo, then changes to black screen and stays there.

 

I delete the file it boots normally.

 

On a side note, has anyone converted AppleALC.kext to FFS and used it in bios? I tried once and it didn't work.

 

Thanks

  • Like 1
mathew2005in
mathew2005in
Posted
Posted

I am having some issue with GUID while inserting kext to bios. it says ffs file with same GUID is exist in the volume but the kext are different though as one is for Audio injection AppleALC.kext and another is for LAN RealtekRTL8111.kext. I can insert AppleALC.kext into another volume but I am not sure it will work?

 

what may be the issue and can we change GUID manually??

 

Thanks

davidm71
davidm71
Posted
Posted

I am having some issue with GUID while inserting kext to bios. it says ffs file with same GUID is exist in the volume but the kext are different though as one is for Audio injection AppleALC.kext and another is for LAN RealtekRTL8111.kext. I can insert AppleALC.kext into another volume but I am not sure it will work?

 

what may be the issue and can we change GUID manually??

 

Thanks

 

I think there was a bug with previous releases of kext2ffs not correctly assigning guids. Better ask Fred for up to date version.

FredWst
FredWst
Posted
Posted

I think there was a bug with previous releases of kext2ffs not correctly assigning guids. Better ask Fred for up to date version.

 

Kext2Ffs does'nt convert Kext with plugins inside.

You must copy PinConfigurator.kext, remove directory plugin from AppleALC.

Put both into Kext2Ffs kext directory.

 

And it should work.

 

Fred

  • Like 1
Guest
This topic is now closed to further replies.
 Share
Go to topic listing
×
×
  • Create New...