Jump to content

Clover General discussion


ErmaC
29,818 posts in this topic

Recommended Posts

Hi, I can boot into OS X fine. I can't automatically boot into OS X.

Two conditions:

1. Timeout=2 or >

2. DefaultVolume=name of partition where is your Mac OS X installed that you want to boot.

Nothing more.

Nothing changed since first revision.

Link to comment
Share on other sites

Two conditions:

1. Timeout=2 or >

2. DefaultVolume=name of partition where is your Mac OS X installed that you want to boot.

Nothing more.

Nothing changed since first revision.

I tried those settings in config.plist but I have timeout=1 so it boots faster. And it doesn't work. Are there drivers I might be missing in Clover to boot OS X?

After 10.10.1 update efi variable is scrapped, hence timeout stalls. To fix, select your osx volume from startup disk preference pane and restart.

I couldn't auto boot since I switched from Chameleon to Clover UEFI (OS X 10.10)
Link to comment
Share on other sites

I said >=2

 

I changed it to 2 and it still doesn't work. 

 

I'm getting this in boot.log

0:701  0:000   Found Clover
0:704  0:003  GetEfiBootDeviceFromNvram: efi-boot-device-data not found
0:705  0:000  EfiBootVolume not found
0:705  0:000  Default boot entry not found
0:705  0:000  DefaultIndex=-1 and MainMenu.EntryCount=9
Link to comment
Share on other sites

Because i dont have a haswell pentium and i really wanna buy the g3258. But i need to know prior to the purchase. :(

iirc the cpuid is not the problem, there's some unknown problem with mavericks and above that prevents it from booting. I'm not aware of anyone that has it working. My advice is to spend a little more on an i3 and cut costs somewhere else if you're on a tight budget.
Link to comment
Share on other sites

Hi, I can boot into OS X fine. I can't automatically boot into OS X.

 

I auto boot into OS X and here is that part of my Clover config. Maybe try this timeout value?

<key>Boot</key>
	<dict>
		<key>Arguments</key>
		<string>darkwake=1 nvda_drv=1 kext-dev-mode=1</string>
		<key>DefaultVolume</key>
		<string>Macintosh HD</string>
		<key>Legacy</key>
		<string>PBR</string>
		<key>Log</key>
		<false/>
		<key>Secure</key>
		<false/>
		<key>Timeout</key>
		<integer>0</integer>
		<key>XMPDetection</key>
		<integer>1</integer>
	</dict>
Link to comment
Share on other sites

@fantasy761 -

 

automatic boot of default volume example: 

this is version will show the GUI for 3 seconds and boot partition OSX.

or set Timeout to 0 to not see the GUI - unless you hold key down:

 

make sure you have these 4 keys (orange) set in the Boot section

and set the DefaultVolume to yours - you seem to not have matched the name right given the output of Default boot entry not found.

 

        <key>Boot</key>

        <dict>

                <key>Arguments</key>

                <string>slide=0 kext-dev-mode=1</string>

                <key>CustomLogo</key>

                <false/>

                <key>DefaultVolume</key>

                <string>OSX</string>

                <key>Fast</key>

                <false/>

                <key>IgnoreNVRAMBoot</key>

                <false/>

                <key>Kernel</key>

                <string>/System/Library/Kernels/kernel</string>

                <key>Log</key>

                <false/>

                <key>Timeout</key>

                <integer>3</integer>

                <key>UseAlternateLogo</key>

                <true/>

                <key>XMPDetection</key>

                <false/>

        </dict>

Link to comment
Share on other sites

iirc the cpuid is not the problem, there's some unknown problem with mavericks and above that prevents it from booting. I'm not aware of anyone that has it working. My advice is to spend a little more on an i3 and cut costs somewhere else if you're on a tight budget.

 

I know but i3 is actually slower than a g3258 OC'd to 4.2GHz and it costs alot more.

 

 

And you can get it to 4.2GHz with the stock cooler.

Link to comment
Share on other sites

I know but i3 is actually slower than a g3258 OC'd to 4.2GHz and it costs alot more.

 

 

And you can get it to 4.2GHz with the stock cooler.

unfortunately, this is true. Where did you see that someone had it working with a fake cpuid? I'm curious about this as well.
Link to comment
Share on other sites

 

I auto boot into OS X and here is that part of my Clover config. Maybe try this timeout value?

<key>Boot</key>
	<dict>
		<key>Arguments</key>
		<string>darkwake=1 nvda_drv=1 kext-dev-mode=1</string>
		<key>DefaultVolume</key>
		<string>Macintosh HD</string>
		<key>Legacy</key>
		<string>PBR</string>
		<key>Log</key>
		<false/>
		<key>Secure</key>
		<false/>
		<key>Timeout</key>
		<integer>0</integer>
		<key>XMPDetection</key>
		<integer>1</integer>
	</dict>

@fantasy761 -

 

automatic boot of default volume example: 

this is version will show the GUI for 3 seconds and boot partition OSX.

or set Timeout to 0 to not see the GUI - unless you hold key down:

 

make sure you have these 4 keys (orange) set in the Boot section

and set the DefaultVolume to yours - you seem to not have matched the name right given the output of Default boot entry not found.

 

        <key>Boot</key>

        <dict>

                <key>Arguments</key>

                <string>slide=0 kext-dev-mode=1</string>

                <key>CustomLogo</key>

                <false/>

                <key>DefaultVolume</key>

                <string>OSX</string>

                <key>Fast</key>

                <false/>

                <key>IgnoreNVRAMBoot</key>

                <false/>

                <key>Kernel</key>

                <string>/System/Library/Kernels/kernel</string>

                <key>Log</key>

                <false/>

                <key>Timeout</key>

                <integer>3</integer>

                <key>UseAlternateLogo</key>

                <true/>

                <key>XMPDetection</key>

                <false/>

        </dict>

 

I tried both these methods but it still wont doesn't auto boot into OS X. I still find it confusing how I can boot fine if I use LastBootedVolume and boot into Windows 7. 

 

This is the boot section of my config.plist before. 

	<key>Boot</key>
	<dict>
		<key>Arguments</key>
		<string>-xcpm kext-dev-mode=1</string>
		<key>DefaultVolume</key>
		<string>MacSSD</string>
		<key>Log</key>
		<false/>
		<key>Secure</key>
		<false/>
                <key>Timeout</key>
                <integer>1</integer>
		<key>XMPDetection</key>
		<string>Yes</string>
	</dict>

And Clover boot.log

0:100  0:100  MemLog inited, TSC freq: 3400024112
0:100  0:000  
0:100  0:000  Now is 1.12.2014,  0:24:28 (GMT+2047)
0:100  0:000  Starting Clover rev 3021 on American Megatrends EFI
0:100  0:000  SelfDevicePath=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000) @DB132918
0:100  0:000  SelfDirPath = \EFI\CLOVER
0:100  0:000  Total Memory Slots Count = 4
0:100  0:000  Type 17 Index = 0
0:100  0:000  Table has error information, checking
0:100  0:000  Found memory information in table 18/1, type=0x3, operation=0x2 syndrome=0x0
0:100  0:000  ...memory OK
0:100  0:000  SmbiosTable.Type17->Speed = 1600MHz
0:100  0:000  SmbiosTable.Type17->Size = 4096MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 0 ChannelA-DIMM0
0:100  0:000  Type 17 Index = 1
0:100  0:000  SmbiosTable.Type17->Speed = 1600MHz
0:100  0:000  SmbiosTable.Type17->Size = 4096MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 1 ChannelA-DIMM1
0:100  0:000  Type 17 Index = 2
0:100  0:000  Table has error information, checking
0:100  0:000  Found memory information in table 18/2, type=0x3, operation=0x2 syndrome=0x0
0:100  0:000  ...memory OK
0:100  0:000  SmbiosTable.Type17->Speed = 1600MHz
0:100  0:000  SmbiosTable.Type17->Size = 4096MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 2 ChannelB-DIMM0
0:100  0:000  Type 17 Index = 3
0:100  0:000  SmbiosTable.Type17->Speed = 1600MHz
0:100  0:000  SmbiosTable.Type17->Size = 4096MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 3 ChannelB-DIMM1
0:100  0:000  Boot status=0
0:100  0:000  Clover revision: 3021  running on System Product Name
0:100  0:000  ... with board P8Z77-V PRO
0:100  0:000  Clover load options size = 40 bytes
0:100  0:000  Clover started with option to boot bootmgfw.efi from EFI
0:103  0:003  Using OEM config.plist at path: EFI\CLOVER\config.plist
0:104  0:000  EFI\CLOVER\config.plist loaded: Success
0:106  0:002  Found theme yosemitelogin
0:109  0:003  Loading early settings
0:109  0:000  timeout set to 3
0:109  0:000  Custom boot CUSTOM_BOOT_DISABLED (0x0)
0:109  0:000  KextsToPatch: 5 requested
0:109  0:000  KextToPatch 0: AppleHDA (t1-10.9/AppleHDA/Realtek ALC892) Kext bin patch, data len: 4
0:109  0:000  KextToPatch 1: IOAHCIBlockStorage (TRIM Enabler) Kext bin patch, data len: 11
0:109  0:000  KextToPatch 2: AppleHDA (t1-10.9/AppleHDA/Resources/xml>zml) Kext bin patch, data len: 6
0:109  0:000  KextToPatch 3: AppleAHCIPort (External icons patch) Kext bin patch, data len: 8
0:109  0:000  KextToPatch 4: AppleHDA (t1-10.9/AppleHDA/Resources/xml>zml) Kext bin patch, data len: 6
0:109  0:000  Default theme: yosemitelogin
0:109  0:000  Hiding entries with string Windows
0:109  0:000  Hiding entries with string BOOTX64.EFI
0:109  0:000  LoadDrivers() start
0:111  0:001  Loading CsmVideoDxe-64.efi
0:111  0:000  load image status=Success
0:111  0:000   - driver needs connecting
0:111  0:000  Loading FSInject-64.efi
0:112  0:000  load image status=Success
0:112  0:000  Loading OsxAptioFixDrv-64.efi
0:112  0:000  load image status=Success
0:112  0:000  Loading OsxFatBinaryDrv-64.efi
0:113  0:000  load image status=Success
0:113  0:000  Loading VBoxHfs-64.efi
0:114  0:001  load image status=Success
0:114  0:000   - driver needs connecting
0:114  0:000  2 drivers needs connecting ...
0:114  0:000  PlatformDriverOverrideProtocol not found. Installing ... Success
0:114  0:000  Video driver loaded: disconnect Success
0:128  0:014  Searching for invalid DiskIo BY_DRIVER connects: not found, all ok
0:382  0:253  LoadDrivers() end
0:382  0:000  SetScreenResolution: 1920x1080 - setting Mode 0
0:456  0:073  Video mode change to mode #0: Success
0:456  0:000  Console modes reported: 3, available modes:
0:456  0:000    Mode 1: 80x25 (current mode)
0:456  0:000    Mode 2: 80x50
0:456  0:000    Mode 3: 100x31
0:456  0:000  SetScreenResolution: 1920x1080 - already set
0:456  0:000  reinit: self device path=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)
0:456  0:000  CPU Vendor = 756E6547 Model=306A9
0:456  0:000  The CPU supported turbo
0:456  0:000  BrandString = Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz
0:456  0:000  MSR 0xE2 before patch 1E000400
0:456  0:000  MSR 0xE4              00000414
0:456  0:000  MSR 0xCE              00081010_F0012200
0:456  0:000  non-usable FLEX_RATIO = F0000
0:456  0:000  corrected FLEX_RATIO = E0000
0:456  0:000  MSR 0x1B0             00000000
0:456  0:000  FSBFrequency=100MHz DMIvalue=100000kHz
0:456  0:000  Corrected FSBFrequency=100MHz
0:456  0:000  Vendor/Model/Stepping: 0x756E6547/0x3A/0x9
0:456  0:000  Family/ExtFamily: 0x6/0x0
0:456  0:000  MaxDiv/MinDiv: 34.0/16
0:456  0:000  Turbo: 42/42/42/42
0:456  0:000  Features: 0xBFEBFBFF
0:456  0:000  Threads: 4
0:456  0:000  Cores: 4
0:456  0:000  FSB: 100 MHz
0:456  0:000  CPU: 3412 MHz
0:456  0:000  TSC: 3412 MHz
0:456  0:000  PIS: 400 MHz
0:456  0:000  PCI (00|00:00.00) : 8086 0150 class=060000
0:456  0:000  PCI (00|00:01.00) : 8086 0151 class=060400
0:456  0:000  PCI (00|01:00.00) : 1002 6818 class=030000
0:456  0:000  Found Radeon model=AMD Radeon HD 7870 Series
0:456  0:000  PCI (00|01:00.01) : 1002 AAB0 class=040300
0:456  0:000  PCI (00|00:14.00) : 8086 1E31 class=0C0330
0:456  0:000  PCI (00|00:16.00) : 8086 1E3A class=078000
0:456  0:000  PCI (00|00:16.01) : FFFF FFFF class=FFFFFF
0:456  0:000  PCI (00|00:19.00) : 8086 1503 class=020000
0:456  0:000  PCI (00|00:1A.00) : 8086 1E2D class=0C0320
0:456  0:000  PCI (00|00:1B.00) : 8086 1E20 class=040300
0:456  0:000  PCI (00|00:1C.00) : 8086 1E10 class=060400
0:456  0:000  PCI (00|00:1C.04) : 8086 244E class=060401
0:456  0:000  PCI (00|03:00.00) : 1B21 1080 class=060401
0:456  0:000  PCI (00|00:1C.06) : 8086 1E1C class=060400
0:456  0:000  PCI (00|05:00.00) : 168C 0032 class=028000
0:456  0:000  PCI (00|00:1D.00) : 8086 1E26 class=0C0320
0:456  0:000  PCI (00|00:1F.00) : 8086 1E44 class=060100
0:456  0:000  PCI (00|00:1F.02) : 8086 1E02 class=010601
0:456  0:000  PCI (00|00:1F.03) : 8086 1E22 class=0C0500
0:456  0:000  PCI (00|00:1F.06) : FFFF FFFF class=FFFFFF
0:456  0:000  ScanSPD() start
0:456  0:000  SMBus CmdReg: 0x3
0:456  0:000  Scanning SMBus [8086:1E22], mmio: 0xF7F35004, ioport: 0xF000, hostc: 0x1
0:471  0:014  SPD[0]: Type 11 @0x50 
0:479  0:008  Found module with XMP version 1.2XMP Profile1: 10*1/8ns
0:479  0:000  Using XMP Profile1 instead of standard frequency 1600MHz
0:479  0:000  DDR speed 1600MHz 
0:479  0:000  Slot: 0 Type 24 4096MB 1600MHz Vendor=G Skill Intl PartNo=F3-12800CL9-4GBXL SerialNo=0000000000000000 
0:494  0:014  SPD[1]: Type 11 @0x51 
0:502  0:008  Found module with XMP version 1.2XMP Profile1: 10*1/8ns
0:502  0:000  Using XMP Profile1 instead of standard frequency 1600MHz
0:502  0:000  DDR speed 1600MHz 
0:502  0:000  Slot: 1 Type 24 4096MB 1600MHz Vendor=G Skill Intl PartNo=F3-12800CL9-4GBXL SerialNo=0000000000000000 
0:517  0:014  SPD[2]: Type 11 @0x52 
0:525  0:008  Found module with XMP version 1.2XMP Profile1: 10*1/8ns
0:525  0:000  Using XMP Profile1 instead of standard frequency 1600MHz
0:525  0:000  DDR speed 1600MHz 
0:525  0:000  Slot: 2 Type 24 4096MB 1600MHz Vendor=G Skill Intl PartNo=F3-12800CL9-4GBXL SerialNo=0000000000000000 
0:539  0:014  SPD[3]: Type 11 @0x53 
0:548  0:008  Found module with XMP version 1.2XMP Profile1: 10*1/8ns
0:548  0:000  Using XMP Profile1 instead of standard frequency 1600MHz
0:548  0:000  DDR speed 1600MHz 
0:548  0:000  Slot: 3 Type 24 4096MB 1600MHz Vendor=G Skill Intl PartNo=F3-12800CL9-4GBXL SerialNo=0000000000000000 
0:580  0:032  SPD[7]: Type 90 @0x57 
0:677  0:096  ScanSPD() end
0:677  0:000  Get Acpi Tables List from RSDT:
0:677  0:000   Found table: FACP  A M I len=132
0:677  0:000   Found table: APIC  A M I len=114
0:677  0:000   Found table: FPDT  A M I len=68
0:677  0:000   Found table: MCFG  A M I len=60
0:677  0:000   Found table: HPET  A M I len=56
0:677  0:000   Found table: SSDT  SataTabl len=877
0:677  0:000   Found table: VFCT  A M I len=23172
0:677  0:000   Found table: SSDT  Cpu0Ist len=2474
0:677  0:000   Found table: SSDT  CpuPm len=2706
0:677  0:000  Calibrated TSC frequency =3400024112 =3400MHz
0:677  0:000  Loading main settings
0:677  0:000  Dropping 3 tables
0:677  0:000  Drop table 0 signature="SSDT" (54445353) table-id="Cpu0Ist" (0074734930757043)
0:677  0:000  set table: 54445353,   74734930757043 to drop:  true
0:677  0:000  
0:677  0:000  Drop table 1 signature="DMAR" (52414D44)
0:677  0:000  set table: 52414D44,                0 to drop:
0:677  0:000  Drop table 2 signature="SSDT" (54445353) table-id="CpuPm" (0000006D50757043)
0:677  0:000  set table: 54445353,       6D50757043 to drop:  true
0:677  0:000  
0:677  0:000  Config set ChassisType=0xD
0:677  0:000  found 11 volumes with blockIO
0:677  0:000   0. Volume:
0:677  0:000    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)
0:680  0:002    Result of bootcode detection: bootable unknown (legacy)
0:680  0:000   1. Volume:
0:680  0:000    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)
0:680  0:000    Result of bootcode detection: bootable Windows (vista,win)
0:680  0:000   2. Volume:
0:680  0:000    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)
0:681  0:000   3. Volume:
0:681  0:000    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)
0:681  0:000    found optical drive
0:681  0:000   4. Volume:
0:681  0:000    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x5,0xFFFF,0x0)
0:681  0:000   5. Volume:
0:681  0:000    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,B93A880C-15F2-4DCE-8339-1C83CD7F8E2A,0x800,0x1788E000)
0:682  0:000    Result of bootcode detection: bootable Windows (vista,win)
0:682  0:000   6. Volume:
0:682  0:000    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)
0:683  0:000    Result of bootcode detection: bootable unknown (legacy)
0:688  0:005    This is SelfVolume !!
0:688  0:000   7. Volume:
0:688  0:000    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(3,GPT,E6857661-C218-46C3-8B2C-3075DDCA76D9,0x178F2800,0x62CAB68)
0:688  0:000   8. Volume:
0:688  0:000    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(4,GPT,8593CCE6-ACD9-46D2-8765-DFAECCA1473B,0x1DBBD368,0x135F20)
0:689  0:000   9. Volume:
0:689  0:000    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(1,MBR,0x6C762267,0x800,0x74701000)
0:689  0:000    Result of bootcode detection: bootable unknown (legacy)
0:689  0:000  10. Volume:
0:689  0:000    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x5,0xFFFF,0x0)\HD(1,MBR,0x2E844E58,0x800,0x74705000)
0:690  0:000    Result of bootcode detection: bootable Windows (win)
0:691  0:001  Using theme 'yosemitelogin' (EFI\CLOVER\themes\yosemitelogin)
0:691  0:000  OS main and drive as badge
0:695  0:004  font font.png loaded from themedir
0:696  0:000  Choosing theme yosemitelogin
0:696  0:000  Custom entries start
0:696  0:000  Custom entries finish
0:696  0:000  Scanning loaders...
0:696  0:000   0: 'Whole Disc Boot' no file system
0:696  0:000   1: 'Whole Disc Boot' no file system
0:696  0:000   2: 'Whole Disc Boot' no file system
0:696  0:000   3: 'Whole Disc Boot' no file system
0:696  0:000   4: 'Whole Disc Boot' no file system
0:696  0:000   5: 'Legacy HD1' no file system
0:696  0:000   6: 'EFI'
0:700  0:004      AddLoaderEntry for Volume Name=EFI
0:724  0:023      AddLoaderEntry for Volume Name=EFI
0:724  0:000     hiding entry: \EFI\BOOT\BOOTX64.efi
0:724  0:000   7: 'MacSSD'
0:729  0:004      AddLoaderEntry for Volume Name=MacSSD
0:730  0:001      Check if volume Is Hibernated:
0:730  0:000      Check sleep image 'by signature':
0:736  0:005      read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success
0:736  0:000      SleepImage name from pref: ImageVolume = 'MacSSD', ImageName = '\private\var\vm\sleepimage'
0:740  0:004      Reading first 512 bytes of sleepimage ...
0:741  0:000   OurBlockIoRead: Lba=1CA72800, Offset=394E500000 (BlockSize=512)
0:741  0:000   sig lion: 0
0:741  0:000   sig snow: 0
0:741  0:000   no valid sleep image offset was found
0:741  0:000      Reading completed -> Success
0:741  0:000       sleepimage offset could not be acquired
0:741  0:000       hibernated: no - sign
0:752  0:011   8: 'Recovery HD'
0:753  0:001      AddLoaderEntry for Volume Name=Recovery HD
0:763  0:009   9: 'Legacy HD1' no file system
0:763  0:000  10: 'Legacy HD1' no file system
0:763  0:000  Custom legacy start
0:763  0:000  Custom legacy end
0:763  0:000  Custom tool start
0:763  0:000  Custom tool end
0:766  0:003  found tool \EFI\CLOVER\tools\Shell64U.efi
0:766  0:000  Checking EFI partition Volume 6 for Clover
0:767  0:000   Found Clover
0:770  0:003  GetEfiBootDeviceFromNvram: efi-boot-device-data not found
0:770  0:000  EfiBootVolume not found
0:770  0:000  Default boot entry not found
0:770  0:000  DefaultIndex=-1 and MainMenu.EntryCount=9
1:028  0:257  GUI ready
4:466  3:438  BootOption of the entry is empty
4:466  0:000  StartLoader() start
4:466  0:000  Finally: Bus=100000kHz CPU=3400MHz
4:466  0:000  Kernel and Kext Patches:
4:466  0:000  	Allowed: y
4:466  0:000  	Debug: n
4:466  0:000  	KernelCpu: n
4:466  0:000  	Lapic: n
4:466  0:000  	AICPUPM: n
4:466  0:000  	AppleRTC: n
4:466  0:000  	KernelPm: n
4:466  0:000  	FakeCPUID: 0x0
4:466  0:000  	ATIController: <null string>
4:466  0:000  	ATIDataLength: 0
4:466  0:000  	0 Kexts to load
4:466  0:000  	5 Kexts to patch
4:466  0:000  	  KextPatch[0]: 4 bytes, AppleHDA
4:466  0:000  	  KextPatch[1]: 11 bytes, IOAHCIBlockStorage
4:466  0:000  	  KextPatch[2]: 6 bytes, AppleHDA
4:466  0:000  	  KextPatch[3]: 8 bytes, AppleAHCIPort
4:466  0:000  	  KextPatch[4]: 6 bytes, AppleHDA
4:466  0:000  Loading boot.efi
4:544  0:077  load image status=Success
4:565  0:021  GetOSVersion: : 10.10.1
4:565  0:000  insert table 9 for dev 0:0
4:565  0:000  insert table 9 for dev 19:0
4:565  0:000  insert table 9 for dev 0:0
4:566  0:000  Injecting user memory modules to SMBIOS
4:566  0:000  Channels: 2
4:566  0:000  Interleave: 0 2 1 3 4 6 5 7 8 10 9 11 12 14 13 15 16 18 17 19 20 22 21 23
4:566  0:000  BANK0 DIMM0 1600MHz 4096MB
4:566  0:000  mTotalSystemMemory = 4096
4:566  0:000  BANK1 DIMM0 1600MHz 4096MB
4:566  0:000  mTotalSystemMemory = 8192
4:566  0:000  BANK0 DIMM1 1600MHz 4096MB
4:566  0:000  mTotalSystemMemory = 12288
4:566  0:000  BANK1 DIMM1 1600MHz 4096MB
4:566  0:000  mTotalSystemMemory = 16384
4:566  0:000  NumberOfMemoryDevices = 4
4:566  0:000  Type20[0]->End = 0x3FFFFF, Type17[0] = 0x1000
4:566  0:000  Type20[1]->End = 0xBFFFFF, Type17[2] = 0x4000
4:566  0:000  Type20[2]->End = 0x7FFFFF, Type17[1] = 0x6000
4:566  0:000  Type20[3]->End = 0xFFFFFF, Type17[3] = 0xA000
4:566  0:000  RSDT 0xDD7D4028
4:566  0:000  FADT from RSDT: 0xDD7D40F8
4:566  0:000  XSDT 0xDD7D4078
4:566  0:000  FADT from XSDT: 0xDD7DEF48
4:566  0:000  Xsdt reallocation done
4:566  0:000  old FADT length=10C
4:566  0:000  Found OperationRegion(GNVS, SystemMemory, DD909E18, ...)
4:566  0:000  Found OperationRegion(MCHT, SystemMemory, FED10000, ...)
4:566  0:000  Found OperationRegion(RCRB, SystemMemory, FED1C000, ...)
4:566  0:000  Found OperationRegion(CPSB, SystemMemory, DD7B9E18, ...)
4:566  0:000  Found OperationRegion(IGDM, SystemMemory, 0, ...)
4:566  0:000  Found OperationRegion(RAMW, SystemMemory, DD8F8018, ...)
4:567  0:001  DSDT len = 0xADC1 new len = 0xC379
4:567  0:000  Apply DsdtFixMask=0x00000000 old way
4:567  0:000     drop _DSM mask=0x0000
4:567  0:000  ========= Auto patch DSDT Starting ========
4:567  0:000  VideoCard devID=0x68181002
4:567  0:000  DisplayADR1[0] = 0x10000, DisplayADR2[0] = 0x0
4:567  0:000  USBADR[0] = 0x140000 and PCIe = 0xFFFE
4:567  0:000  USBADR[1] = 0x1A0000 and PCIe = 0xFFFE
4:840  0:272  Audio HDA (addr:0x1B0000) setting specified layout-id=1 (0x1)
4:840  0:000  Found Airport Atheros at 0x1C0006, 0x0
4:840  0:000  USBADR[2] = 0x1D0000 and PCIe = 0xFFFE
4:840  0:000  first CPU found at 7212 offset 7215
4:840  0:000  score candidate at 720E
4:840  0:000  score inserted in acpi_cpu_score _PR_
4:840  0:000  Found ACPI CPU: CPU0 And CPU1 And CPU2 And CPU3 And CPU4 And CPU5 And CPU6 And CPU7 
  within the score: _PR_
4:840  0:000  Found PCIROOTUID = 0
4:840  0:000  ========= Auto patch DSDT Finished ========
4:840  0:000  Drop tables from Xsdt, SIGN=SSDT TableID=CpuPm Length=2706
4:840  0:000   Xsdt has tables count=9 
4:840  0:000   Table: SSDT  CpuPm  2706 dropped
4:840  0:000  corrected XSDT length=100
4:840  0:000  Drop tables from Xsdt, SIGN=SSDT TableID=Cpu0Ist Length=2474
4:840  0:000   Xsdt has tables count=8 
4:840  0:000   Table: SSDT  Cpu0Ist  2474 dropped
4:840  0:000  corrected XSDT length=92
4:840  0:000  Drop tables from Xsdt, SIGN=SSDT TableID= Length=0
4:840  0:000   Xsdt has tables count=7 
4:840  0:000   Table: SSDT  SataTabl  877 dropped
4:840  0:000  corrected XSDT length=84
4:840  0:000  Inserting SSDT.aml from EFI\CLOVER\ACPI\patched ... Success
4:843  0:003   CPUBase=0 and ApicCPUBase=1 ApicCPUNum=4
4:843  0:000  EdidDiscovered size=128
4:843  0:000  00 | 00 FF FF FF FF FF FF 00 04 69 93 24 01 01 01 01 
4:843  0:000  16 | 14 17 01 03 80 35 1E 78 EA 2C C5 A4 56 50 A1 28 
4:843  0:000  32 | 0F 50 54 BF EF 00 71 4F 81 80 81 40 95 00 A9 40 
4:843  0:000  48 | B3 00 D1 C0 01 01 02 3A 80 18 71 38 2D 40 58 2C 
4:843  0:000  64 | 45 00 13 2B 21 00 00 1E 00 00 00 FD 00 32 4C 1E 
4:843  0:000  80 | 53 11 00 0A 20 20 20 20 20 20 00 00 00 FC 00 56 
4:843  0:000  96 | 45 32 34 37 0A 20 20 20 20 20 20 20 00 00 00 FF 
4:843  0:000  112 | 00 44 35 4C 4D 51 53 30 35 37 32 37 34 0A 00 C2 
4:843  0:000  ATI injection not set
4:843  0:000  LAN Controller [8086:1503] :: PciRoot(0x0)\Pci(0x19,0x0)
4:844  0:000  HDA Controller [8086:1E20] :: PciRoot(0x0)\Pci(0x1B,0x0) => setting specified layout-id=1 (0x1)
4:844  0:000  stringlength = 540
4:844  0:000  CurrentMode: Width=1920 Height=1080
4:844  0:000  FSInjection: using kexts path: 'EFI\CLOVER\kexts\10.10'
4:850  0:006  MSR 0x1B0   set to        00000000
4:850  0:000  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.10
4:852  0:001    Extra kext: EFI\CLOVER\kexts\10.10\AHCIPortInjector.kext
4:855  0:003    Extra kext: EFI\CLOVER\kexts\10.10\VoodooPS2Controller.kext
4:862  0:006      Extra PlugIn kext: EFI\CLOVER\kexts\10.10\VoodooPS2Controller.kext\Contents\PlugIns\VoodooPS2Keyboard.kext
4:866  0:004      Extra PlugIn kext: EFI\CLOVER\kexts\10.10\VoodooPS2Controller.kext\Contents\PlugIns\VoodooPS2Mouse.kext
4:870  0:003      Extra PlugIn kext: EFI\CLOVER\kexts\10.10\VoodooPS2Controller.kext\Contents\PlugIns\VoodooPS2Trackpad.kext
4:874  0:004    Extra kext: EFI\CLOVER\kexts\10.10\realtekALC.kext
4:879  0:004  Removed efi-boot-device-data variable: Not Found
4:879  0:000  Custom boot is disabled
4:879  0:000  Closing log

Link to comment
Share on other sites

@Fantasy761: Are you sure you're editing the right plist? There's a different timeout between your log and posted plist:

<key>Timeout</key>
<integer>1</integer>
0:109 0:000 timeout set to 3

And Clover seems to fail to recover data from the NVRAM, install the EmuVariableUEFI driver and reboot a couple of times.

0:770 0:003 GetEfiBootDeviceFromNvram: efi-boot-device-data not found
0:770 0:000 EfiBootVolume not found
0:770 0:000 Default boot entry not found
Link to comment
Share on other sites

 

@Fantasy761: Are you sure you're editing the right plist? There's a different timeout between your log and posted plist:

<key>Timeout</key>
<integer>1</integer>
0:109 0:000 timeout set to 3

And Clover seems to fail to recover data from the NVRAM, install the EmuVariableUEFI driver and reboot a couple of times.

0:770 0:003 GetEfiBootDeviceFromNvram: efi-boot-device-data not found
0:770 0:000 EfiBootVolume not found
0:770 0:000 Default boot entry not found

 

 

I am using the right plist. The one posted is with tluck's config. I installed EMUVariableUEFI but it still won't auto boot to OS X. 

0:100  0:100  MemLog inited, TSC freq: 3400028810
0:100  0:000  
0:100  0:000  Now is 1.12.2014,  2:47:0 (GMT+2047)
0:100  0:000  Starting Clover rev 3033 on American Megatrends EFI
0:100  0:000  SelfDevicePath=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000) @D1A48518
0:100  0:000  SelfDirPath = \EFI\CLOVER
0:100  0:000  Total Memory Slots Count = 4
0:100  0:000  Type 17 Index = 0
0:100  0:000  Table has error information, checking
0:100  0:000  Found memory information in table 18/1, type=0x3, operation=0x2 syndrome=0x0
0:100  0:000  ...memory OK
0:100  0:000  SmbiosTable.Type17->Speed = 1600MHz
0:100  0:000  SmbiosTable.Type17->Size = 4096MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 0 ChannelA-DIMM0
0:100  0:000  Type 17 Index = 1
0:100  0:000  SmbiosTable.Type17->Speed = 1600MHz
0:100  0:000  SmbiosTable.Type17->Size = 4096MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 1 ChannelA-DIMM1
0:100  0:000  Type 17 Index = 2
0:100  0:000  Table has error information, checking
0:100  0:000  Found memory information in table 18/2, type=0x3, operation=0x2 syndrome=0x0
0:100  0:000  ...memory OK
0:100  0:000  SmbiosTable.Type17->Speed = 1600MHz
0:100  0:000  SmbiosTable.Type17->Size = 4096MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 2 ChannelB-DIMM0
0:100  0:000  Type 17 Index = 3
0:100  0:000  SmbiosTable.Type17->Speed = 1600MHz
0:100  0:000  SmbiosTable.Type17->Size = 4096MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 3 ChannelB-DIMM1
0:100  0:000  Boot status=0
0:100  0:000  Clover revision: 3033  running on System Product Name
0:100  0:000  ... with board P8Z77-V PRO
0:100  0:000  Clover load options size = 40 bytes
0:100  0:000  Clover started with option to boot bootmgfw.efi from EFI
0:103  0:003  Using OEM config.plist at path: EFI\CLOVER\config.plist
0:104  0:000  EFI\CLOVER\config.plist loaded: Success
0:106  0:002  Found theme yosemitelogin
0:109  0:003  Found theme christmas
0:112  0:002  Found theme NEWYEAR
0:114  0:002  Loading early settings
0:114  0:000  timeout set to 1
0:114  0:000  Custom boot CUSTOM_BOOT_DISABLED (0x0)
0:114  0:000  KextsToPatch: 5 requested
0:114  0:000  KextToPatch 0: AppleHDA (t1-10.9/AppleHDA/Resources/xml>zml) Kext bin patch, data len: 6
0:114  0:000  KextToPatch 1: AppleHDA (t1-10.9/AppleHDA/Realtek ALC892) Kext bin patch, data len: 4
0:114  0:000  KextToPatch 2: AppleHDA (t1-10.9/AppleHDA/Resources/xml>zml) Kext bin patch, data len: 6
0:114  0:000  KextToPatch 3: AppleAHCIPort (External icons patch) Kext bin patch, data len: 8
0:114  0:000  KextToPatch 4: IOAHCIBlockStorage (TRIM Enabler) Kext bin patch, data len: 11
0:114  0:000  Default theme: yosemitelogin
0:114  0:000  Hiding entries with string Windows
0:114  0:000  Hiding entries with string BOOTX64.EFI
0:114  0:000  LoadDrivers() start
0:116  0:002  Loading CsmVideoDxe-64.efi
0:117  0:000  load image status=Success
0:117  0:000   - driver needs connecting
0:117  0:000  Loading EmuVariableUefi-64.efi
0:117  0:000  load image status=Success
0:117  0:000  EmuVariableUefi Initialize: VariableCommonInitialize = Success, orig services stored, install gEmuVariableControlProtocolGuid = Success
0:118  0:000  Loading FSInject-64.efi
0:118  0:000  load image status=Success
0:118  0:000  Loading OsxAptioFixDrv-64.efi
0:119  0:000  load image status=Success
0:119  0:000  Loading OsxFatBinaryDrv-64.efi
0:120  0:000  load image status=Success
0:120  0:000  Loading VBoxHfs-64.efi
0:120  0:000  load image status=Success
0:120  0:000   - driver needs connecting
0:120  0:000  2 drivers needs connecting ...
0:120  0:000  PlatformDriverOverrideProtocol not found. Installing ... Success
0:120  0:000  Video driver loaded: disconnect Success
0:772  0:651  Searching for invalid DiskIo BY_DRIVER connects: not found, all ok
0:790  0:018  CsmVideoDriverBindingStart
0:790  0:000  mixed support=40010
0:790  0:000  Controller is [030000]
0:790  0:000  Check for VBE
0:796  0:005   found Detail Timing 1920x1080
0:809  0:012    0 1152x864 attr=BB - ok, edid+, working, highest, pref=0
0:810  0:000    1 1280x960 attr=BB - ok, edid+, working, highest, pref=1
0:810  0:000    2 640x480 attr=BB - ok, edid+, 640x480, working
0:811  0:000    3 800x600 attr=BB - ok, edid+, 800x600, working
0:811  0:000    4 1024x768 attr=BB - ok, edid+, 1024x768, working
0:811  0:000    5 1280x1024 attr=BB - ok, edid+, working, highest, pref=5
0:814  0:002    6 1400x1050 attr=BB - ok, edid-
0:825  0:011    7 1920x1080 attr=BB - ok, edid+, working, highest, pref=7
0:825  0:000  CsmVideo: New mode: 7 1920x1080 - set
0:900  0:075   - SetMode pref 7 (7) = Success
0:900  0:000  CsmVideoCheckForVbe - Success
0:900  0:000  CsmVideoDriverBindingStart end Success
0:900  0:000  CsmVideo: New mode: 4 1024x768 - blocking that switch
0:906  0:005  CsmVideo: New mode: 8 -1625525372x-1692448513- EFI_UNSUPPORTED
1:003  0:097  LoadDrivers() end
1:003  0:000  EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent VirtualAddressChange = Success, CreateEvent ExitBootServices = Success, set Status=Success
1:024  0:020  SetScreenResolution: 1920x1080 - already set
1:024  0:000  Console modes reported: 3, available modes:
1:024  0:000    Mode 1: 80x25 (current mode)
1:024  0:000    Mode 2: 80x50
1:024  0:000    Mode 3: 100x31
1:024  0:000  reinit: self device path=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)
1:024  0:000  CPU Vendor = 756E6547 Model=306A9
1:024  0:000  The CPU supported turbo
1:024  0:000  BrandString = Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz
1:024  0:000  MSR 0xE2 before patch 1E000400
1:024  0:000  MSR 0xE4              00000414
1:024  0:000  MSR 0xCE              00081010_F0012200
1:024  0:000  non-usable FLEX_RATIO = F0000
1:024  0:000  corrected FLEX_RATIO = E0000
1:024  0:000  MSR 0x1B0             00000000
1:024  0:000  FSBFrequency=100MHz DMIvalue=100000kHz
1:024  0:000  Corrected FSBFrequency=100MHz
1:024  0:000  Vendor/Model/Stepping: 0x756E6547/0x3A/0x9
1:024  0:000  Family/ExtFamily: 0x6/0x0
1:024  0:000  MaxDiv/MinDiv: 34.0/16
1:024  0:000  Turbo: 42/42/42/42
1:024  0:000  Features: 0xBFEBFBFF
1:024  0:000  Threads: 4
1:024  0:000  Cores: 4
1:024  0:000  FSB: 100 MHz
1:024  0:000  CPU: 3412 MHz
1:024  0:000  TSC: 3412 MHz
1:024  0:000  PIS: 400 MHz
1:024  0:000  PCI (00|00:00.00) : 8086 0150 class=060000
1:024  0:000  PCI (00|00:01.00) : 8086 0151 class=060400
1:024  0:000  PCI (00|01:00.00) : 1002 6818 class=030000
1:024  0:000  Found Radeon model=AMD Radeon HD 7870 Series
1:024  0:000  PCI (00|01:00.01) : 1002 AAB0 class=040300
1:024  0:000  PCI (00|00:14.00) : 8086 1E31 class=0C0330
1:024  0:000  PCI (00|00:16.00) : 8086 1E3A class=078000
1:024  0:000  PCI (00|00:16.01) : FFFF FFFF class=FFFFFF
1:024  0:000  PCI (00|00:19.00) : 8086 1503 class=020000
1:024  0:000  PCI (00|00:1A.00) : 8086 1E2D class=0C0320
1:024  0:000  PCI (00|00:1B.00) : 8086 1E20 class=040300
1:024  0:000  PCI (00|00:1C.00) : 8086 1E10 class=060400
1:024  0:000  PCI (00|00:1C.04) : 8086 244E class=060401
1:024  0:000  PCI (00|03:00.00) : 1B21 1080 class=060401
1:024  0:000  PCI (00|00:1C.06) : 8086 1E1C class=060400
1:024  0:000  PCI (00|05:00.00) : 168C 0032 class=028000
1:024  0:000  PCI (00|00:1D.00) : 8086 1E26 class=0C0320
1:024  0:000  PCI (00|00:1F.00) : 8086 1E44 class=060100
1:024  0:000  PCI (00|00:1F.02) : 8086 1E02 class=010601
1:024  0:000  PCI (00|00:1F.03) : 8086 1E22 class=0C0500
1:024  0:000  PCI (00|00:1F.06) : FFFF FFFF class=FFFFFF
1:024  0:000  ScanSPD() start
1:025  0:000  SMBus CmdReg: 0x3
1:025  0:000  Scanning SMBus [8086:1E22], mmio: 0xF7F35004, ioport: 0xF000, hostc: 0x1
1:039  0:014  SPD[0]: Type 11 @0x50 
1:047  0:008  Found module with XMP version 1.2XMP Profile1: 10*1/8ns
1:047  0:000  Using XMP Profile1 instead of standard frequency 1600MHz
1:047  0:000  DDR speed 1600MHz 
1:047  0:000  Slot: 0 Type 24 4096MB 1600MHz Vendor=G Skill Intl PartNo=F3-12800CL9-4GBXL SerialNo=0000000000000000 
1:062  0:014  SPD[1]: Type 11 @0x51 
1:070  0:008  Found module with XMP version 1.2XMP Profile1: 10*1/8ns
1:070  0:000  Using XMP Profile1 instead of standard frequency 1600MHz
1:070  0:000  DDR speed 1600MHz 
1:070  0:000  Slot: 1 Type 24 4096MB 1600MHz Vendor=G Skill Intl PartNo=F3-12800CL9-4GBXL SerialNo=0000000000000000 
1:085  0:014  SPD[2]: Type 11 @0x52 
1:093  0:008  Found module with XMP version 1.2XMP Profile1: 10*1/8ns
1:093  0:000  Using XMP Profile1 instead of standard frequency 1600MHz
1:093  0:000  DDR speed 1600MHz 
1:093  0:000  Slot: 2 Type 24 4096MB 1600MHz Vendor=G Skill Intl PartNo=F3-12800CL9-4GBXL SerialNo=0000000000000000 
1:108  0:014  SPD[3]: Type 11 @0x53 
1:116  0:008  Found module with XMP version 1.2XMP Profile1: 10*1/8ns
1:116  0:000  Using XMP Profile1 instead of standard frequency 1600MHz
1:116  0:000  DDR speed 1600MHz 
1:116  0:000  Slot: 3 Type 24 4096MB 1600MHz Vendor=G Skill Intl PartNo=F3-12800CL9-4GBXL SerialNo=0000000000000000 
1:149  0:032  SPD[7]: Type 90 @0x57 
1:245  0:096  ScanSPD() end
1:245  0:000  Get Acpi Tables List from RSDT:
1:245  0:000   Found table: FACP  A M I len=132
1:245  0:000   Found table: APIC  A M I len=114
1:245  0:000   Found table: FPDT  A M I len=68
1:245  0:000   Found table: MCFG  A M I len=60
1:245  0:000   Found table: HPET  A M I len=56
1:245  0:000   Found table: SSDT  SataTabl len=877
1:245  0:000   Found table: BGRT  A M I len=56
1:245  0:000   Found table: SSDT  Cpu0Ist len=2474
1:245  0:000   Found table: SSDT  CpuPm len=2706
1:245  0:000  Calibrated TSC frequency =3400028810 =3400MHz
1:245  0:000  Loading main settings
1:245  0:000  Dropping 3 tables
1:245  0:000  Drop table 0 signature="SSDT" (54445353) table-id="CpuPm" (0000006D50757043)
1:245  0:000  set table: 54445353,       6D50757043 to drop:  true
1:245  0:000  
1:245  0:000  Drop table 1 signature="DMAR" (52414D44)
1:245  0:000  set table: 52414D44,                0 to drop:
1:245  0:000  Drop table 2 signature="SSDT" (54445353) table-id="Cpu0Ist" (0074734930757043)
1:245  0:000  set table: 54445353,   74734930757043 to drop:  true
1:245  0:000  
1:245  0:000  Config set ChassisType=0xD
1:245  0:000  found 11 volumes with blockIO
1:245  0:000   0. Volume:
1:246  0:000    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)
1:248  0:002    Result of bootcode detection: bootable unknown (legacy)
1:248  0:000   1. Volume:
1:248  0:000    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)
1:248  0:000    Result of bootcode detection: bootable Windows (vista,win)
1:248  0:000   2. Volume:
1:248  0:000    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)
1:249  0:000   3. Volume:
1:249  0:000    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)
1:249  0:000    found optical drive
1:249  0:000   4. Volume:
1:249  0:000    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x5,0xFFFF,0x0)
1:249  0:000   5. Volume:
1:249  0:000    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,B93A880C-15F2-4DCE-8339-1C83CD7F8E2A,0x800,0x1788E000)
1:250  0:000    Result of bootcode detection: bootable Windows (vista,win)
1:250  0:000   6. Volume:
1:250  0:000    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)
1:250  0:000    Result of bootcode detection: bootable unknown (legacy)
1:256  0:005    This is SelfVolume !!
1:256  0:000   7. Volume:
1:256  0:000    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(3,GPT,E6857661-C218-46C3-8B2C-3075DDCA76D9,0x178F2800,0x62CAB68)
1:256  0:000   8. Volume:
1:256  0:000    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(4,GPT,8593CCE6-ACD9-46D2-8765-DFAECCA1473B,0x1DBBD368,0x135F20)
1:257  0:000   9. Volume:
1:257  0:000    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(1,MBR,0x6C762267,0x800,0x74701000)
1:260  0:003    Result of bootcode detection: bootable unknown (legacy)
1:260  0:000  10. Volume:
1:260  0:000    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x5,0xFFFF,0x0)\HD(1,MBR,0x2E844E58,0x800,0x74705000)
1:261  0:000    Result of bootcode detection: bootable Windows (win)
1:264  0:003  Loading nvram.plist from Vol 'MacSSD' - loaded, size=811
1:265  0:000  PutNvramPlistToRtVars ...
1:265  0:000   Skipping EmuVariableUefiPresent
1:265  0:000   Adding Key: LocationServicesEnabled: Data: Size = 1: Success
1:265  0:000   Adding Key: MyVar: Data: Size = 9: Success
1:265  0:000   Skipping OsxAptioFixDrv-RelocBase
1:265  0:000   Adding Key: SystemAudioVolume: Data: Size = 1: Success
1:265  0:000   Adding Key: SystemAudioVolumeDB: Data: Size = 1: Success
1:265  0:000   Adding Key: boot-gamma: Data: Size = 50: Success
1:265  0:000   Adding Key: fmm-computer-name: Data: Size = 14: Success
1:265  0:000   Adding Key: prev-lang:kbd: Data: Size = 5: Success
1:265  0:000   Adding Key: security-mode: String: Size = 4, Val = 'none': Success
1:266  0:001  Using theme 'yosemitelogin' (EFI\CLOVER\themes\yosemitelogin)
1:266  0:000  OS main and drive as badge
1:270  0:004  font font.png loaded from themedir
1:270  0:000  Choosing theme yosemitelogin
1:270  0:000  Custom entries start
1:270  0:000  Custom entries finish
1:270  0:000  Scanning loaders...
1:270  0:000   0: 'Whole Disc Boot' no file system
1:270  0:000   1: 'Whole Disc Boot' no file system
1:270  0:000   2: 'Whole Disc Boot' no file system
1:270  0:000   3: 'Whole Disc Boot' no file system
1:270  0:000   4: 'Whole Disc Boot' no file system
1:270  0:000   5: 'Legacy HD1' no file system
1:270  0:000   6: 'EFI'
1:274  0:004      AddLoaderEntry for Volume Name=EFI
1:297  0:022   7: 'MacSSD'
1:300  0:002      AddLoaderEntry for Volume Name=MacSSD
1:301  0:001      Check if volume Is Hibernated:
1:301  0:000      Check sleep image 'by signature':
1:307  0:005      read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success
1:307  0:000      SleepImage name from pref: ImageVolume = 'MacSSD', ImageName = '\private\var\vm\sleepimage'
1:311  0:004      Reading first 512 bytes of sleepimage ...
1:312  0:000   OurBlockIoRead: Lba=1CA72800, Offset=394E500000 (BlockSize=512)
1:312  0:000   sig lion: 0
1:312  0:000   sig snow: 0
1:312  0:000   no valid sleep image offset was found
1:312  0:000      Reading completed -> Success
1:312  0:000       sleepimage offset could not be acquired
1:312  0:000       hibernated: no - sign
1:323  0:011   8: 'Recovery HD'
1:324  0:000      AddLoaderEntry for Volume Name=Recovery HD
1:334  0:009   9: 'Legacy HD1' no file system
1:334  0:000  10: 'Legacy HD1' no file system
1:334  0:000  Custom legacy start
1:334  0:000  Custom legacy end
1:334  0:000  Custom tool start
1:334  0:000  Custom tool end
1:338  0:004  found tool \EFI\CLOVER\tools\Shell64U.efi
1:338  0:000  Checking EFI partition Volume 6 for Clover
1:339  0:000   Found Clover
1:340  0:000  EmuVariable UninstallEmulation: CloseEvent = Success, original var services restored
1:343  0:002  EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent VirtualAddressChange = Success, CreateEvent ExitBootServices = Success, set Status=Success
1:363  0:020  GetEfiBootDeviceFromNvram: efi-boot-device-data not found
1:363  0:000  EfiBootVolume not found
1:363  0:000  Default boot entry not found
1:363  0:000  EmuVariable UninstallEmulation: CloseEvent = Success, original var services restored
1:363  0:000  DefaultIndex=-1 and MainMenu.EntryCount=9
1:679  0:315  GUI ready
6:378  4:699  BootOption of the entry is empty
6:378  0:000  StartLoader() start
6:378  0:000  Finally: Bus=100000kHz CPU=3400MHz
6:378  0:000  Kernel and Kext Patches:
6:378  0:000  	Allowed: y
6:378  0:000  	Debug: n
6:378  0:000  	KernelCpu: n
6:378  0:000  	Lapic: n
6:378  0:000  	AICPUPM: n
6:378  0:000  	AppleRTC: n
6:378  0:000  	KernelPm: n
6:378  0:000  	FakeCPUID: 0x0
6:378  0:000  	ATIController: <null string>
6:378  0:000  	ATIDataLength: 0
6:378  0:000  	0 Kexts to load
6:378  0:000  	5 Kexts to patch
6:378  0:000  	  KextPatch[0]: 6 bytes, AppleHDA
6:378  0:000  	  KextPatch[1]: 4 bytes, AppleHDA
6:378  0:000  	  KextPatch[2]: 6 bytes, AppleHDA
6:378  0:000  	  KextPatch[3]: 8 bytes, AppleAHCIPort
6:378  0:000  	  KextPatch[4]: 11 bytes, IOAHCIBlockStorage
6:378  0:000  Loading boot.efi
6:455  0:077  load image status=Success
6:539  0:083  GetOSVersion: : 10.10.1
6:539  0:000  EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent VirtualAddressChange = Success, CreateEvent ExitBootServices = Success, set Status=Success
6:560  0:020  insert table 9 for dev 0:0
6:560  0:000  insert table 9 for dev 19:0
6:560  0:000  insert table 9 for dev 0:0
6:560  0:000  Injecting user memory modules to SMBIOS
6:560  0:000  Channels: 2
6:560  0:000  Interleave: 0 2 1 3 4 6 5 7 8 10 9 11 12 14 13 15 16 18 17 19 20 22 21 23
6:560  0:000  BANK0 DIMM0 1600MHz 4096MB
6:560  0:000  mTotalSystemMemory = 4096
6:560  0:000  BANK1 DIMM0 1600MHz 4096MB
6:560  0:000  mTotalSystemMemory = 8192
6:560  0:000  BANK0 DIMM1 1600MHz 4096MB
6:560  0:000  mTotalSystemMemory = 12288
6:560  0:000  BANK1 DIMM1 1600MHz 4096MB
6:560  0:000  mTotalSystemMemory = 16384
6:560  0:000  NumberOfMemoryDevices = 4
6:561  0:000  Type20[0]->End = 0x3FFFFF, Type17[0] = 0x1000
6:561  0:000  Type20[1]->End = 0xBFFFFF, Type17[2] = 0x4000
6:561  0:000  Type20[2]->End = 0x7FFFFF, Type17[1] = 0x6000
6:561  0:000  Type20[3]->End = 0xFFFFFF, Type17[3] = 0xA000
6:561  0:000  RSDT 0xDD736028
6:561  0:000  FADT from RSDT: 0xDD7360F8
6:561  0:000  XSDT 0xDD736078
6:561  0:000  FADT from XSDT: 0xDD740F48
6:561  0:000  Xsdt reallocation done
6:561  0:000  old FADT length=10C
6:561  0:000  Found OperationRegion(GNVS, SystemMemory, DD865E18, ...)
6:561  0:000  Found OperationRegion(MCHT, SystemMemory, FED10000, ...)
6:561  0:000  Found OperationRegion(RCRB, SystemMemory, FED1C000, ...)
6:561  0:000  Found OperationRegion(CPSB, SystemMemory, DD715E18, ...)
6:561  0:000  Found OperationRegion(IGDM, SystemMemory, 0, ...)
6:561  0:000  Found OperationRegion(RAMW, SystemMemory, DD854018, ...)
6:563  0:002  DSDT len = 0xADC1 new len = 0xC379
6:563  0:000  Apply DsdtFixMask=0x00000000 old way
6:563  0:000     drop _DSM mask=0x0000
6:563  0:000  ========= Auto patch DSDT Starting ========
6:563  0:000  VideoCard devID=0x68181002
6:563  0:000  DisplayADR1[0] = 0x10000, DisplayADR2[0] = 0x0
6:563  0:000  USBADR[0] = 0x140000 and PCIe = 0xFFFE
6:563  0:000  USBADR[1] = 0x1A0000 and PCIe = 0xFFFE
6:834  0:271  Audio HDA (addr:0x1B0000) setting specified layout-id=1 (0x1)
6:834  0:000  Found Airport Atheros at 0x1C0006, 0x0, DeviceID=0x0032
6:834  0:000  USBADR[2] = 0x1D0000 and PCIe = 0xFFFE
6:834  0:000  first CPU found at 7212 offset 7215
6:834  0:000  score candidate at 720E
6:834  0:000  score inserted in acpi_cpu_score _PR_
6:834  0:000  Found ACPI CPU: CPU0 And CPU1 And CPU2 And CPU3 And CPU4 And CPU5 And CPU6 And CPU7 
  within the score: _PR_
6:835  0:000  Found PCIROOTUID = 0
6:835  0:000  ========= Auto patch DSDT Finished ========
6:835  0:000  Drop tables from Xsdt, SIGN=SSDT TableID=CpuPm Length=2706
6:835  0:000   Xsdt has tables count=9 
6:835  0:000   Table: SSDT  CpuPm  2706 dropped
6:835  0:000  corrected XSDT length=100
6:835  0:000  Drop tables from Xsdt, SIGN=SSDT TableID=Cpu0Ist Length=2474
6:835  0:000   Xsdt has tables count=8 
6:835  0:000   Table: SSDT  Cpu0Ist  2474 dropped
6:835  0:000  corrected XSDT length=92
6:835  0:000  Drop tables from Xsdt, SIGN=SSDT TableID= Length=0
6:835  0:000   Xsdt has tables count=7 
6:835  0:000   Table: SSDT  SataTabl  877 dropped
6:835  0:000  corrected XSDT length=84
6:835  0:000  Inserting SSDT.aml from EFI\CLOVER\ACPI\patched ... Success
6:837  0:002   CPUBase=0 and ApicCPUBase=1 ApicCPUNum=4
6:837  0:000  EdidDiscovered size=128
6:837  0:000  00 | 00 FF FF FF FF FF FF 00 04 69 93 24 01 01 01 01 
6:837  0:000  16 | 14 17 01 03 80 35 1E 78 EA 2C C5 A4 56 50 A1 28 
6:837  0:000  32 | 0F 50 54 BF EF 00 71 4F 81 80 81 40 95 00 A9 40 
6:837  0:000  48 | B3 00 D1 C0 01 01 02 3A 80 18 71 38 2D 40 58 2C 
6:837  0:000  64 | 45 00 13 2B 21 00 00 1E 00 00 00 FD 00 32 4C 1E 
6:837  0:000  80 | 53 11 00 0A 20 20 20 20 20 20 00 00 00 FC 00 56 
6:837  0:000  96 | 45 32 34 37 0A 20 20 20 20 20 20 20 00 00 00 FF 
6:837  0:000  112 | 00 44 35 4C 4D 51 53 30 35 37 32 37 34 0A 00 C2 
6:837  0:000  ATI injection not set
6:838  0:000  LAN Controller [8086:1503] :: PciRoot(0x0)\Pci(0x19,0x0)
6:838  0:000  HDA Controller [8086:1E20] :: PciRoot(0x0)\Pci(0x1B,0x0) => setting specified layout-id=1 (0x1)
6:838  0:000  stringlength = 540
6:838  0:000  CurrentMode: Width=1920 Height=1080
6:838  0:000  FSInjection: using kexts path: 'EFI\CLOVER\kexts\10.10'
6:841  0:003  MSR 0x1B0   set to        00000000
6:841  0:000  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.10
6:843  0:001    Extra kext: EFI\CLOVER\kexts\10.10\AHCIPortInjector.kext
6:846  0:003    Extra kext: EFI\CLOVER\kexts\10.10\VoodooPS2Controller.kext
6:853  0:006      Extra PlugIn kext: EFI\CLOVER\kexts\10.10\VoodooPS2Controller.kext\Contents\PlugIns\VoodooPS2Keyboard.kext
6:857  0:004      Extra PlugIn kext: EFI\CLOVER\kexts\10.10\VoodooPS2Controller.kext\Contents\PlugIns\VoodooPS2Mouse.kext
6:861  0:003      Extra PlugIn kext: EFI\CLOVER\kexts\10.10\VoodooPS2Controller.kext\Contents\PlugIns\VoodooPS2Trackpad.kext
6:866  0:004    Extra kext: EFI\CLOVER\kexts\10.10\realtekALC.kext
6:869  0:003  Removed efi-boot-device-data variable: Not Found
6:869  0:000  Custom boot is disabled
6:869  0:000  Closing log
Link to comment
Share on other sites

Hi Slice, 

 

I tried both OsxAptioFix2Drv-64 and OsxAptioFixDrv-64 without any success.  If I replace the files in EFI>Boot with the ones from r2721, I can boot properly.  Is there something different with BOOTIA32/BOOTX64 files in the newer versions of Clover that would be causing my boot up problem?  If I used r2721's boot files, would they be able to boot Yosemite? 

 

Hi Slice -- Any thoughts on this?

 

Thx

Link to comment
Share on other sites

Need Help on the clover boot GUI 

 

I can't get the clover boot GUI full resolution (1920x1080)

 

Here's what I tried so far:

 

     - no custom EDID, No Patch VBios, No PatchVBiosBtyes  -->   GUI shows like squashed 1920x1440

 

     - with or without custom EDID, Patch VBios Enable, no PatchVBiosBytes  -->  GUI shows like stretched 800x600

 

     - with or without custom EDID, NO Patch VBios Enable,  with PatchVBiosBytes  -->  GUI still shows like stretched 800x600

       (with PatchVBiosBytes:  find "gAeoAqAF"  replace "gAeoAjgE" )

       I attached the boot log of this test.

 

what else I missed ? 

attached the clover config.plist

 

 

my setup:

Clover v2k r2999

Yosemite 10.10.1

CPU Sandy i7

Gigabyte P67A-UD3R-B3   -->  Non UEFI

Intel 120G SSD

DDR3 8G Memory

 

config.plist.zip

bootlog.log.txt.zip

Link to comment
Share on other sites

×
×
  • Create New...