All Activity

no it doesn't load without nblue or whatever green, just sits there no error no nada, just endless verbose mode that's it..

no idea what's wrong except for AAPL00,override-no-connect which is edid specif injection and not for your hardware for sure does your system boot without nblue/wjatevergreen ? i think whatevergreen needs the agdc patch arg here are the args i updated the post -v keepsyms=1 debug=0x100 agdpmod=vit9696 the sergANt hang is hard to figure out why i doubt csr-active-config and security settings i'm using help OMFG i got a hang... i enabled secure boot so i can get ota updates and set csr-active-config to 00000000 and the system reboots in loop with or without nblue just in case i went back to FFFFFFFF

I am a newbie when it comes to Radeon Framebuffers. This will be my first attempt to patch Radeon Framebuffers myself (and so far, I don't know what I'm doing). Based on what I've read, the experts who are still active are Slice and Mieze. Maybe RobertX. I'm sure the Acidanthera folks like vit9696 know this stuff, too. For those who are here to watch and wait without actively participating and helping, it will be more fun to watch grass grow. EDIT: I am able to patch the Acre Framebuffer in Catalina. My patches in Open Core EFI are being reflected in IORegistry. For example, I am able to change connector-type from DP -> HDMI and I can change ATY,ControlFlags. Now, I just need to figure out what needs to be patched.

Updated to OC v1! No issue so far, simple upgrade.

i just did with sky's device properties, as i didnt know what other ones to use, no difference. Attached my config without serial numbers, etc. and the acpi files i used too. ACPI.zip config.plist

try posted whatevergreen

Sadly my model hasn't received any bios update since the launch. Edit: Followed your guide and tried with VoodooHDA, it doesn't work either

yeah im having the same issue too, with my 9a68 device added i get a similar if not the same hang.. variations of bootargs, device properties, etc. e.g. -igfxvesa makes no difference nor kext updating. Idk why he and i are having such a hard time but, unlike everyone else we're just having no luck loading in nblue off or not with our deviceID in the kext. It only boots for him and i without it in the info.plist

No. System hang when added my iGPU id into NootedBlue plist. Param -igfxvesa dont help, only remove iGPU id from plist make system bootable in VESA moode. logs with boot params: -v keepsyms=1 debug=0x100 opencore-2024-05-10-191613.txt

They tell "the no-sound-issue seems to be fixed in a BIOS update ". I can also invite you to test VoodooHDA.

Hello, I have an Asus Zenbook UM3402YA and I’m having trouble getting the audio to work on MacOS Sonoma. I’ve tried all the available layouts with AppleALC but none seem to work. It could be related to the problem that was also manifesting in Linux as per this article https://wiki.archlinux.org/title/ASUS_Zenbook_UM3402YA?

yeah im using ventura 13.6.5

idk what cause nblue to hang for you guys this is my current setup nblue as lots of ventura patches i think will panic on sonoma anyway theres a wahtevergreen version tested for sonoma posted earlier gonna try inject some device props just to check if system hangs. update: it work and no hangs that hang in log looks like a lilu hang. is it cause of liludebug flag ? Arquivo.zip now i get why macos uses framebuffer1 connector for our laptops it's cause of linux regs TRANS_CONF_EDP (0x0007f008): 0x00000000 (disabled, inactive, pf-pd) TRANS_HBLANK_EDP (0x0006f004): 0x00000000 (1 start, 1 end) TRANS_HSYNC_EDP (0x0006f008): 0x00000000 (1 start, 1 end) TRANS_HTOTAL_EDP (0x0006f000): 0x00000000 (1 active, 1 total) TRANS_SPACE_EDP (0x0006f024): 0x00000000 TRANS_VBLANK_EDP (0x0006f010): 0x00000000 (1 start, 1 end) TRANS_VSYNC_EDP (0x0006f014): 0x00000000 (1 start, 1 end) TRANS_VSYNCSHIFT_EDP (0x0006f028): 0x00000000 TRANS_VTOTAL_EDP (0x0006f00c): 0x00000000 (1 active, 1 total) TRANS_DATAM1_EDP (0x0006f030): 0x00000000 (TU 1, val 0x0 0) TRANS_DATAN1_EDP (0x0006f034): 0x00000000 (val 0x0 0) TRANS_LINKM1_EDP (0x0006f040): 0x00000000 (val 0x0 0) TRANS_LINKN1_EDP (0x0006f044): 0x00000000 (val 0x0 0) TRANS_DDI_FUNC_CTL_EDP (0x0006f400): 0x00000000 (disabled, no port, HDMI, 8 bpc, -VSync, -HSync, EDP A ON, x1) TRANS_MSA_MISC_EDP (0x0006f410): 0x00000000 TRANS_CONF_A (0x00070008): 0xc0000000 (enabled, active, pf-pd) TRANS_HBLANK_A (0x00060004): 0x0835077f (1920 start, 2102 end) TRANS_HSYNC_A (0x00060008): 0x07cf07af (1968 start, 2000 end) TRANS_HTOTAL_A (0x00060000): 0x0835077f (1920 active, 2102 total) TRANS_MULT_A (0x0006002c): 0x00000000 TRANS_SPACE_A (0x00060024): 0x00000000 TRANS_VBLANK_A (0x00060010): 0x04bf0437 (1080 start, 1216 end) TRANS_VSYNC_A (0x00060014): 0x04460441 (1090 start, 1095 end) TRANS_VSYNCSHIFT_A (0x00060028): 0x00000000 TRANS_VTOTAL_A (0x0006000c): 0x04bf0437 (1080 active, 1216 total) TRANS_DATAM1_A (0x00060030): 0x7e417275 (TU 64, val 0x417275 4289141) TRANS_DATAN1_A (0x00060034): 0x00800000 (val 0x800000 8388608) TRANS_LINKM1_A (0x00060040): 0x00057434 (val 0x57434 357428) TRANS_LINKN1_A (0x00060044): 0x00080000 (val 0x80000 524288) TRANS_DDI_FUNC_CTL_A (0x00060400): 0x8a000006 (enabled, no port, DP SST, 8 bpc, -VSync, no edp pipe connected ofc i can force it but bad things happens because macos does lot of checks to enable edp

done

@luke192 [Video] How to add a signature.

Jala, can you share the current plist? im pretty sure nothing changed, but just to be sure, because aside from ignoring the bus 0:2:0 in device properties, i have not made much changes, but the new nblue should work with Sonoma right, since the registers update? im using Macbookpro9,1. For Sleep you need to manage _S3 using a SSDT to ensure all hardware goes off, https://github.com/meghan06/XPS13-73902in1#enabling-s3-sleep It doesnt wok for me however even though im using it internally, We would have to have the functionality moved to whenvergreen @benmacfreak If you used the settings below, it should give you basic usage using nblue: Clear out the Device properties properties related to PCI Bus 0:2:0 This should be empty , or place a # in front to the PciRoot....... it should look like this #PciRoot(0x0)/Pci(0x2,0x0) Kernel, replace whenvergreen info with Nblue kext and update the executable path accordingly, also copy the nblue kext to your kext folder. NVRAM - 7C436110-AB2A-4BBB-A880-FE41995C9F82 Do not use igfxfw=2 or -allow3d, the scheduler select is done in nblue already. if not able to boot, just re add -igfxvesa to your boot flags

Thanks for you response, jalavoui. I gathered the logs using hackingtool-logs. Searching by iGPU key error in file system.process-kernel.txt HE2N_Key Does Not Exist, use kSMCPStatesIGPU for Internal GPU hackingtool-logs.zip In Ubuntu get dump: reg_dump.zip lshw.txt Unfortunately, I didn't understand how to create *.bin and rcs0: bcs0:. For example, I tried sudo intel_reg decode rcs0, but it didn't work. Could you please provide some guidance? Thank you. Update: Using latest NootedBlue.kext macOS not booted. OC log and scr opencore-2024-05-10-162207.zip

Impessiving testing and experimenting so far. How far os do you think it will reach to Sonoma?

I read the next version of open core is out. I have not had a chance to look at it yet has any one here?

i made a new efi from scratch and now i'm getting stuck here

i may use linux but i dont know how to check those logs either tbh sorry

google for i915ovmfPkg-master source code and check linux logs. (drm.debug=0x1e log_buf_len=1M) on linux the display power on/off registers come from vbt no such thing in macos we got connectors patch... i did try to hack with the linux values but them there's the camelia code breaking sleep/wake but i find out that the sleep/wake cicle works on macos (did a test and works also with a external usb disk) now i just need to figure out howto wake up the display i just added tiger lake and alder card ids to nblue info.plist so you guys dont need todo it NootedBlue.kext.zipNootedBlue-master.zip benmacfreak you dont need todo it. just boot osx and post ioreg + syslog with or without nblue instaled btw guys one detail about sleep on my mobo when i put the display to sleep the laptop led turns off (sleep indicator) and when i press the power button it wakes and turns lihgt on ofc macos wake function is disabled and the displays wont turn on idk if all hardware can do the wake/sleep cicle but u guys can test if the led light work

i did try the forked whatevergreen from sky, no different. I don't understand xcode at all so idk how to use that to help figure out why.. im not familiar enough with macOS or hackintosh whatsoever to use syslog in hackintool or terminal to figure this out without someone remotely helping fix and/or troubleshooting this. sorry.

Thanks for reminding me, i do remember you posting about the RAM = 0x0\ before, i just wondered if it was the only section. When i use the int gpu tools on ubuntu it doesnt list some registers, for example the ones in the code below arent in the list, im sure these ones are important though, amongst others.... ubuntu@ubuntu:/etc/X11/xorg.conf.d$ sudo intel_reg read 0xc8254 (0x000c8254): 0x00017700 (freq 1, cycle 30464) ubuntu@ubuntu:/etc/X11/xorg.conf.d$ sudo intel_reg read 0xc8253 0x00012700 (0x000c8253): 0x0000fd80 (0x00012700): 0x00000000 ubuntu@ubuntu:/etc/X11/xorg.conf.d$ sudo intel_reg read 0xc8256 0x00012700 (0x000c8256): 0x00fd0001 (0x00012700): 0x00000000 ubuntu@ubuntu:/etc/X11/xorg.conf.d$ sudo intel_reg read 0xc8257 0x00012700 (0x000c8257): 0x0000fd00 (0x00012700): 0x00000000 or should i use 'quiet splash drm.debug=0x14'