ctich Posted August 25, 2017 Share Posted August 25, 2017 I can not install Sierra 10.12.6 on: MSI Z270 PC Mate I5 7400 Kaby Lake After a lot of tests I can not get past the line of the photo. I send clover folder with compressed tables. It is your installation with slight modifications. I can not send "ioreg" or "run it" because I have not started yet. Thanks for your help. hi, replace EFI.zip 1 Link to comment Share on other sites More sharing options...
Tatocr Posted August 25, 2017 Share Posted August 25, 2017 Many thanks ctich. Already this saw installed. It is very complete your "config.plis", my knowledge are more basic. Thank you very very much. 1 Link to comment Share on other sites More sharing options...
XLR Posted August 28, 2017 Share Posted August 28, 2017 Hi MaLd0n, I have a Z270XP with many issues: most usb ports don't work, restart instead of shutdown, problems waking up after sleep, pci devices don't display in system profiler, can't load lpc without kp, etc... Can you please take a look, here's my clover folder with F4 acpi tables, ioreg and sendme. Thanks in advance CLOVER.zip Leon’s iMac.ioreg.zip Send me Leon’s iMac.zip 1 Link to comment Share on other sites More sharing options...
Kynyo Posted August 28, 2017 Share Posted August 28, 2017 Updated just now! System Software Overview: System Version: macOS 10.13 (17A358a) Kernel Version: Darwin 17.0.0 Boot Volume: HS Boot Mode: Normal Computer Name: HS’s iMac User Name: HS (hs) Secure Virtual Memory: Enabled System Integrity Protection: Enabled Time since boot: 2 minutes HFS mode. Link to comment Share on other sites More sharing options...
idioteque2 Posted August 28, 2017 Share Posted August 28, 2017 Hello! I could use some help! CLOVER.zip Brian’s iMac.zip Send me Brian’s iMac.zip 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted August 30, 2017 Author Share Posted August 30, 2017 Hi MaLd0n, I have a Z270XP with many issues: most usb ports don't work, restart instead of shutdown, problems waking up after sleep, pci devices don't display in system profiler, can't load lpc without kp, etc... Can you please take a look, here's my clover folder with F4 acpi tables, ioreg and sendme. Thanks in advance CLOVER.zip send me new ioreg after reboot Hello! I could use some help! CLOVER.zip send me new ioreg after reboot 2 Link to comment Share on other sites More sharing options...
idioteque2 Posted August 30, 2017 Share Posted August 30, 2017 Thank you, I appreciate it! Brian’s iMac.zip Link to comment Share on other sites More sharing options...
idioteque2 Posted August 31, 2017 Share Posted August 31, 2017 I'm still having to boot from USB, is that normal? Link to comment Share on other sites More sharing options...
MaLd0n Posted August 31, 2017 Author Share Posted August 31, 2017 no sierra 10.12.6? 1 Link to comment Share on other sites More sharing options...
idioteque2 Posted August 31, 2017 Share Posted August 31, 2017 Yes. I installed clover on my system disk and replaced with the clover folder that you sent. When I try to boot without USB it says to insert boot disk to continue. Link to comment Share on other sites More sharing options...
idioteque2 Posted August 31, 2017 Share Posted August 31, 2017 I have it working without USB now, I was booting from wrong partition. It looks like I'm going to have to use El Capitan though because an audio device I use doesn't have drivers for Sierra. Would it be possible to do this on El Capitan? Link to comment Share on other sites More sharing options...
VirusX Posted September 1, 2017 Share Posted September 1, 2017 what device is that? Which drivers do you need? Sometimes you can use old drivers... Link to comment Share on other sites More sharing options...
idioteque2 Posted September 1, 2017 Share Posted September 1, 2017 The Tascam US-2000. I can use the old drivers, but the speakers sound glitchy, and when I wanted to change the audio to 48,000Khz the entire device stopped working no matter what I did. However, I have El Capitan up and working and everything seems to be all right. I changed the SM BIOS back to iMac 17 and used the fake CPUID and that all seems to work. The only thing I can't use is my new Pascal GPU because El Capitan has no support for Pascal that I know of? Link to comment Share on other sites More sharing options...
Lendon Posted September 2, 2017 Share Posted September 2, 2017 Hi MaLd0n here is my files and please help me the DSDT ! sometimes my pc can't work with my usb port correctly usb port will work slow or can't detect usb flash drive? my pc is as blow: MB: GA-Z270X-Gaming5、Bios F8 CPU: i7-7700K RAM:16G x2 VGA: Nvidia GTX950 2G Wifi: BCM94360CD and this is my clover florder Lendon’s Mac Pro.ioreg.zip Send me Lendon’s Mac Pro.zip CLOVER.zip 1 Link to comment Share on other sites More sharing options...
XLR Posted September 4, 2017 Share Posted September 4, 2017 CLOVER.zip send me new ioreg after reboot Here's the ioreg: Leon’s iMac.ioreg.zip Sound started working, pci devices show up in system profiler, shutdown works, lpc loads, but usb3 ports can only see usb2 devices... Interesting, if i put the system to sleep, then after it wakes up i can see all the attached usb3 devices. EDIT: Shutdown doesn't works when usb devices connected. Also, if i connect a usb-c device when the computer is off - it turns on again... 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted September 6, 2017 Author Share Posted September 6, 2017 Hi MaLd0n here is my files and please help me the DSDT ! sometimes my pc can't work with my usb port correctly usb port will work slow or can't detect usb flash drive? my pc is as blow: MB: GA-Z270X-Gaming5、Bios F8 CPU: i7-7700K RAM:16G x2 VGA: Nvidia GTX950 2G Wifi: BCM94360CD and this is my clover florder CLOVER.zip Here's the ioreg: Leon’s iMac.ioreg.zip Sound started working, pci devices show up in system profiler, shutdown works, lpc loads, but usb3 ports can only see usb2 devices... Interesting, if i put the system to sleep, then after it wakes up i can see all the attached usb3 devices. EDIT: Shutdown doesn't works when usb devices connected. Also, if i connect a usb-c device when the computer is off - it turns on again... try a usb ssdt instead usbinjectall 3 Link to comment Share on other sites More sharing options...
Lendon Posted September 6, 2017 Share Posted September 6, 2017 thank you so much for the DSDT ! Link to comment Share on other sites More sharing options...
XLR Posted September 6, 2017 Share Posted September 6, 2017 try a usb ssdt instead usbinjectall Looks like i got it fixed by using 15>26 port limit instead of 15>30 in kextstopatch, and now everything works great! Thank you! Btw, what dsdt patched did you apply? 1 Link to comment Share on other sites More sharing options...
superchase9000 Posted September 6, 2017 Share Posted September 6, 2017 I am having trouble with my new setup. I have a 7600K, MSI Z270 Gaming M5, GTX 1070. I am unable to see SATA or NVMe drives. That and I cannot get the Nvidia Web Drivers to load. I've tried a handful of patches, SSDT-SATA from Rehabman, SATA-200-Unsupported.kext, and a handful others. The SATA controller is 8086:A282, which is apparently unsupported. I'm at my wits end as my first hackintosh with my skylake went beautifully. Hopefully someone can help me out here. Here are the support files. I appreciate anyone's help they can offer! EFI.zip ioreg.zip Send me John’s iMac.zip 1 Link to comment Share on other sites More sharing options...
angel88 Posted September 7, 2017 Share Posted September 7, 2017 dear Mald0n please help me with DSDT, my info i5 7500 ASUS B250-Plus GTX1060 6G this is my files CLOVER upload.zip Send me FakeMacintosh的iMac.zip FakeMacintosh'siMac182.zip 1 Link to comment Share on other sites More sharing options...
Delecta Posted September 7, 2017 Share Posted September 7, 2017 Hey MaLd0n, thank you for your work , it helped me a lot. I use your DSDT file on my hackintosh, but I thought maybe I need a patch because I don't have the same MotherBoard. Here is my config : MB : MSI Z270 SLI Plus CPU : Intel 7700K 4.2 GHz GPU : Inno3D GeForce GTX 1060 6GB RAM : Kingston HyperX Fury 2x8 Gb in 2666MHz OSX : 10.12.6 The DSDT is a thing a don't understand so much , so I just take your file and put it into ACPI/Origin Thank You. 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted September 9, 2017 Author Share Posted September 9, 2017 Looks like i got it fixed by using 15>26 port limit instead of 15>30 in kextstopatch, and now everything works great! Thank you! Btw, what dsdt patched did you apply? ohhh yes, need 26 limit port patch all patches in first post 2 Link to comment Share on other sites More sharing options...
Li Tan Posted September 10, 2017 Share Posted September 10, 2017 Hi MaLd0n here is my zip file and please help me on the DSDT. I couldn't get my sound to work. Thanks my pc is as blow: MB: MSI-Z270-TOMAHAWK-OPT-BOOST Bios 3.10 CPU: i7-6700K RAM:16G x2 VGA: Nvidia GTX750 TI Sound: ALC892 MSI-Z270-TOMAHAWK-OPT-BOOST-ClOVER_IOREG.zip 1 Link to comment Share on other sites More sharing options...
Delecta Posted September 11, 2017 Share Posted September 11, 2017 Hey again MaLd0n, I just have issues with my ALC1220 audio. I try all way to get it : Lilu , VoodooHDA , Toleda's way. And there is nothing who works. If you can help me it will be nice. MB : MSI Z270 SLI Plus CPU : Intel 7700K 4.2 GHz GPU : Inno3D GeForce GTX 1060 6GB RAM : Kingston HyperX Fury 2x8 Gb in 2666MHz OSX : 10.12.6 Thank you ! CLOVER.zip Send me test’s iMac.zip Delecta's iMac.zip 1 Link to comment Share on other sites More sharing options...
spawn2001ita Posted September 11, 2017 Share Posted September 11, 2017 Hello MaLd0n, thanks for this guide. I have a problem with speed of the lan controller, if i transfert a big file from my nas the data speed is average 22MB/s, but the lan negotiation is 1000 in the Sierra setting and the led of my gibagit switch is green (1000). If i transfert the same file with Windows or Ubuntu the data speed is 80-90MB/s. I have used the kext in first page: http://www.insanelymac.com/forum/files/file/313-atherose2200ethernet/ My mainboard is GA Z270 Gaming K3 You can help me please? 1 Link to comment Share on other sites More sharing options...
Recommended Posts