1213 replies to this topic

[jeisom]

Reposted here.
I installed from 10.8.0 with Sinetek's original kernel.   Then updated to 10.8.2.  Anything that I have seen since just instantly reboots after processing kexts.

Quote

Hi all.
  I have a FX-8120 on a ASUS M5A97 EVO motherboard with 16GB of ram & a nVidia GTX 465.  So far I have only been only able to use Sinetek's original ML kernel.  Everything from Sinetek since & AnV's reboots instantly reboots after processing kexts. Currently have AnV's corecrypto.kext installed and the 10.8.0  AppleACPIPlatform.kext IOACPIFamily.kext  IOPCIFamily.kext  System.kext kexts. I have tried "-f -v npci=x3000" with and with -x. I don't have the nVidia driver in /S/L/E.
Any Ideas? Thanks

Output of lspci

Spoiler

00:00.0 Host bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (external gfx0 port (rev 02)
00:02.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (PCI express gpp port
00:04.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (PCI express gpp port D)
00:05.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (PCI express gpp port E)
00:06.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (PCI express gpp port F)
00:07.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (PCI express gpp port G)
00:09.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (PCI express gpp port H)
00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] (rev 40)
00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 42)
00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) (rev 40)
00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge (rev 40)
00:14.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:15.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0)
00:16.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:16.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 15h Processor Function 0
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 15h Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 15h Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 15h Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 15h Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices [AMD] Family 15h Processor Function 5
01:00.0 VGA compatible controller: NVIDIA Corporation Device 06c4 (rev a3)
01:00.1 Audio device: NVIDIA Corporation GF100 High Definition Audio Controller (rev a1)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
03:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller
04:00.0 SATA controller: JMicron Technology Corp. JMB362 SATA Controller (rev 10)
05:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller
06:00.0 Network controller: Atheros Communications Inc. AR9300 Wireless LAN adaptor (rev 01)
07:05.0 Multimedia controller: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder (rev f0)
07:07.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0)
08:00.0 Multimedia controller: Philips Semiconductors SAA7164 (rev 81)

[Bitcore]

jeisom, on 10 January 2013 - 05:12 PM, said:

Reposted here.
I installed from 10.8.0 with Sinetek's original kernel.   Then updated to 10.8.2.  Anything that I have seen since just instantly reboots after processing kexts.

I got exactly the same problem! first it didn't work and then after adding corecrypto.kext to my /extra/extensions folder it worked.
After processing kexts, it loaded this corecrypto and it booted.
But now it looks like it can't boot the corecrypto anymore ;0

Anybody who nows how to be sure it boots this kext?

Bitcore

[Gismo]

Bitcore, on 10 January 2013 - 09:55 PM, said:

I got exactly the same problem! first it didn't work and then after adding corecrypto.kext to my /extra/extensions folder it worked.
After processing kexts, it loaded this corecrypto and it booted.
But now it looks like it can't boot the corecrypto anymore ;0

Anybody who nows how to be sure it boots this kext?

Bitcore

I have also the problem with FX8350 and ASUS Crosshair V motherboard with 16GB ram and Nvidia GTX 670.
So far I have only been only able to use Sinetek original ML kernel from the first page and it comes KP
unfortunately boot the Kernel from Andy Vandijck nothing.
Who can pleace help me?

Best regards,

Gismo

[MadMungo]

I have been trying to get ML 10.8.2 installed on my machine, ASUS Crosshair V Formula-Z with 16Gb ram and ATI HD5970.

So far I can get it to load all the kexts but it then goes to a Black screen for 20-30 seconds and reboots, resetting my bios
to defaults.

I have tried sineteks kernel, andys kernel & various corecrypto.kexts etc and still get the same results.

Any help would be greatly appreciated.

Thanks,
MadMungo

[TheMentalist]

If I can install ML on the following then please do let me know.

Phenom II 960T
8GB DDR3
GA-880gm-USB 3 rev 3.1
Sapphire HD 7750 2 GB DDR3

Thanks.

[Deltac0]

MadMungo, on 11 January 2013 - 04:17 AM, said:

I have been trying to get ML 10.8.2 installed on my machine, ASUS Crosshair V Formula-Z with 16Gb ram and ATI HD5970.

So far I can get it to load all the kexts but it then goes to a Black screen for 20-30 seconds and reboots, resetting my bios
to defaults.

I have tried sineteks kernel, andys kernel & various corecrypto.kexts etc and still get the same results.

Any help would be greatly appreciated.

Thanks,
MadMungo

Sounds like the kernel is still "vanilla", because that's what happens when you boot AMD on vanilla kernel, instant reboot. However, it can also be your FX processor, but it should work.

TheMentalist, on 11 January 2013 - 04:32 AM, said:

If I can install ML on the following then please do let me know.

Phenom II 960T
8GB DDR3
GA-880gm-USB 3 rev 3.1
Sapphire HD 7750 2 GB DDR3

Thanks.

Easily bro!
I suggest using myHack, make 10.8.2 USB, change kernel to Andy's. If it says something about corecrypto, use the patched one.
If still no boot, use Sinetek's test2 or the original kernel with patched corecrypto.

[theconnactic]

Not as easy as seems to be, Deltac0: his graphics card is an AMD 7750. 7xxx series will be supported by the upcoming 10.8.3 update, but they're currently not supported. TheMentalist'll have to wait a couple of weeks or even more than that.

MadMungo, you'll have to add the kernel flags the point to the chosen kernel. With latest AnV, use "amd_kernel arch=x86_64 -v" (without the quotes, of course).

[TheMentalist]

Deltac0, on 11 January 2013 - 05:23 AM, said:

Sounds like the kernel is still "vanilla", because that's what happens when you boot AMD on vanilla kernel, instant reboot. However, it can also be your FX processor, but it should work.



Easily bro!
I suggest using myHack, make 10.8.2 USB, change kernel to Andy's. If it says something about corecrypto, use the patched one.
If still no boot, use Sinetek's test2 or the original kernel with patched corecrypto.

But will the kernel be a 32 bit or 64 ? and I am more worried about my GPU which is a HD 7750 is that supported ?

[happel]

TheMentalist, on 11 January 2013 - 07:17 AM, said:

But will the kernel be a 32 bit or 64 ? and I am more worried about my GPU which is a HD 7750 is that supported ?

Read the post above you

[MadMungo]

Deltac0, on 11 January 2013 - 05:23 AM, said:

Sounds like the kernel is still "vanilla", because that's what happens when you boot AMD on vanilla kernel, instant reboot. However, it can also be your FX processor, but it should work.

theconnactic, on 11 January 2013 - 05:37 AM, said:

MadMungo, you'll have to add the kernel flags the point to the chosen kernel. With latest AnV, use "amd_kernel arch=x86_64 -v" (without the quotes, of course).

@ Deltac0 & theconnactic

Yes that is what I am doing. tried every kernel, including AnV's on the first page with a multitude of different kernel flags and still no luck.

Have tried using Legacy OS and UEFI Aware settings in bios as well with no noticable change.

I will soldier on and see if I can fluke a combination and get it to install/boot.

[Deltac0]

@TheConnactic, I know HD7xxx insn't supported yet, but could it be possible to try to use the kexts from 10.8.3 beta?
I think Netkas did some research about that...

[Andy Vandijck]

Explanation here: http://netkas.org

[Bitcore]

The lines before my system reboots: http://img210.images...258/errorhs.png
Whyyyyyy...
Anyone who knows what to do about it?

Bitcore

[iFIRE]

bad SMBIOS

[Bitcore]

iFIRE, on 11 January 2013 - 03:57 PM, said:

bad SMBIOS

actually none SMBIOS

[iFIRE]

jejejejeje!!!!!  and like you want boot your system!!!!! if you not have a SMBIOS , post your Extra folder, and please put your hardware in your signature for support

[theconnactic]

Bitcore, which kernel are you using?

You have to use the name of the kernel as a boot flag, did you do it? I.e.: if you're using AnV's latest kernel, you'll have to use the boot flag amd_kernel before typing arch=x86_64 and the other boot flags.

Best regards!

P.S.: and edit your signature so it has your exact specs, like iFire said.

[Bitcore]

theconnactic, on 11 January 2013 - 04:17 PM, said:

Bitcore, which kernel are you using?

You have to use the name of the kernel as a boot flag, did you do it? I.e.: if you're using AnV's latest kernel, you'll have to use the boot flag amd_kernel before typing arch=x86_64 and the other boot flags.

Best regards!

P.S.: and edit your signature so it has your exact specs, like iFire said.

I always boot with amd_kernel as flag. i do not have a mach_kernel on it so if i boot without amd_kernel it just says "cant find mach_kernel"

[theconnactic]

Post please your complete specs. This instant reboot issue should have been obliterated from AMD machines.

[byransays]

Hey! back on Lion, trying to get 64-bit with Itz shanes latest build. First boot I had a KP on AppleRTC, so I disabled it, now after a -f boot I got a KP on AppleOnboardPCATA...however when I look in my Extensions folder, there is no such kext?

Alright pictures. This one is normal boot. (with -f)



This is with safe mode(and -f)


It seems im stuck on FakeSMC and this AppleOnboardPCATA(which sometimes is AppleOnboardPCATARoot)

Ive tried a newer FakeSMC to no avail...and like I said I can not find an AppleOnboardPCATA kext, nor a plugin in kexts like AppleACPIFamily and such. Any ideas?