Jump to content

HWSensors

FakeSMC Plugins Hardware Monitoring Sensors SuperIO Temperature Voltage Tachometer Frequency

  • Please log in to reply
1029 replies to this topic

#61
mitch_de

mitch_de

    InsanelyMacaholic

  • Local Moderators
  • 2,884 posts
  • Gender:Male
  • Location:Stuttgart / Germany
I only want to remember to check real stepping after using new fakesmc + intelthermal by msrdumper.
For me it was not only an cosmetic problem - showing an fixed 10* multiplier , it was real fixed multiplier problem. Stepping stopped working.
For me, IntelThermal shows fixed multiplier 10* and that was real - no stepping shown also in msr dumper. Went back to older fakesmc + InteCPUMonitor = stepping works again with same OSX and same dsdt.
Dont know if maybe bit newer builds or other C2D cpus like mine (E7400) dont have that effect but i would cross check stepping with msrdumper.
my first thinking: could it be that IntelThermal MSR reads can block the native AppleIntelCPU.kext in changing the MSR stepping tasks by timing problems / interrupt problems in the msr read code (maybe depends on CPU type also if problem happens) ?

#62
dgsga

dgsga

    I've seen things you people wouldn't believe...

  • Members
  • PipPipPip
  • 155 posts
  • Gender:Male
Feedback for moz: Nuvoton plugin works great for fans and temps on Maximus IV Gene-Z mobo but all voltages show as zero?? A good start, though

#63
Mohamed Khairy

Mohamed Khairy

    InsanelyMac Deity

  • Members
  • PipPipPipPipPipPipPipPipPipPip
  • 2,169 posts
  • Gender:Male
latest one is fixed between 23 27 !!

not correct

#64
kozlek

kozlek

    InsanelyMac Sage

  • Developers
  • 331 posts
  • Gender:Male
  • Location:Israel
Sorry, I have no SandyBridge system, can't debug and test it. I'll try to find some documentation or open source projects.

#65
Mohamed Khairy

Mohamed Khairy

    InsanelyMac Deity

  • Members
  • PipPipPipPipPipPipPipPipPipPip
  • 2,169 posts
  • Gender:Male

Sorry, I have no SandyBridge system, can't debug and test it. I'll try to find some documentation or open source projects.


thanks very much mozodojo for your work
i can give you continuous feedback if you want

http://www.insanelym...howtopic=258612

#66
THe KiNG

THe KiNG

    InsanelyMac Legend

  • Gurus
  • 710 posts
  • Gender:Male

Sorry, I have no SandyBridge system, can't debug and test it. I'll try to find some documentation or open source projects.

I can try to help but on me it fail to compile both xcode 3.x or 4.x.
What's the trick?

#67
kozlek

kozlek

    InsanelyMac Sage

  • Developers
  • 331 posts
  • Gender:Male
  • Location:Israel

I can try to help but on me it fail to compile both xcode 3.x or 4.x.
What's the trick?


Mac OS X Lion 10.7.3, XCode 4.2.1, LLVM GCC 4.2 - nothing special?

#68
THe KiNG

THe KiNG

    InsanelyMac Legend

  • Gurus
  • 710 posts
  • Gender:Male

Mac OS X Lion 10.7.3, XCode 4.2.1, LLVM GCC 4.2 - nothing special?

My mistake, didn't know I can only work on kexts, usually I remove the content of the build/binary folder...

#69
kozlek

kozlek

    InsanelyMac Sage

  • Developers
  • 331 posts
  • Gender:Male
  • Location:Israel

I only want to remember to check real stepping after using new fakesmc + intelthermal by msrdumper.
For me it was not only an cosmetic problem - showing an fixed 10* multiplier , it was real fixed multiplier problem. Stepping stopped working.
For me, IntelThermal shows fixed multiplier 10* and that was real - no stepping shown also in msr dumper. Went back to older fakesmc + InteCPUMonitor = stepping works again with same OSX and same dsdt.
Dont know if maybe bit newer builds or other C2D cpus like mine (E7400) dont have that effect but i would cross check stepping with msrdumper.
my first thinking: could it be that IntelThermal MSR reads can block the native AppleIntelCPU.kext in changing the MSR stepping tasks by timing problems / interrupt problems in the msr read code (maybe depends on CPU type also if problem happens) ?


SpeedStep working for me

Attached File  Снимок экрана 2012-02-10 в 09.30.20.png   34.51KB   5 downloads

If I use stepper data from macbookpro (SP11) in CustomProfile.kext when multiplier comes down to 11 on idle and comes up to 15-18-22 on CPU load. If I use stepper data from iMac (SP10) when multiplier always stays on maximum 22.

#70
mitch_de

mitch_de

    InsanelyMacaholic

  • Local Moderators
  • 2,884 posts
  • Gender:Male
  • Location:Stuttgart / Germany
"If I use stepper data from macbookpro (SP11) in CustomProfile.kext when multiplier comes down to 11 on idle and comes up to 15-18-22 on CPU load. If I use stepper data from iMac (SP10) when multiplier always stays on maximum 22. "
Yep, but how can it be in may case, that without changing anything the usage of IntelThermal blocks stepping (fxed max multi on C2D, in the past, i dont reused an newer version).

#71
kozlek

kozlek

    InsanelyMac Sage

  • Developers
  • 331 posts
  • Gender:Male
  • Location:Israel

"If I use stepper data from macbookpro (SP11) in CustomProfile.kext when multiplier comes down to 11 on idle and comes up to 15-18-22 on CPU load. If I use stepper data from iMac (SP10) when multiplier always stays on maximum 22. "
Yep, but how can it be in may case, that without changing anything the usage of IntelThermal blocks stepping (fxed max multi on C2D, in the past, i dont reused an newer version).


I don't know, need more investigation

#72
Mohamed Khairy

Mohamed Khairy

    InsanelyMac Deity

  • Members
  • PipPipPipPipPipPipPipPipPipPip
  • 2,169 posts
  • Gender:Male
latest one here is the result the same :(
Attached File  15.png   170.02KB   83 downloads

#73
ham4ever

ham4ever

    InsanelyMac Sage

  • Members
  • PipPipPipPipPip
  • 324 posts
  • Gender:Male
i can use it in Amd Athlon II x3 453 and Ati hd4850 ??

thanks

#74
mm67

mm67

    InsanelyMac Legend

  • Members
  • PipPipPipPipPipPipPip
  • 673 posts
  • Gender:Male
  • Location:Finland
Looking pretty good with the latest version, only thing not working is that multiplier reading is stuck. MSRDumper and power meter show that speedstepping is working and multiplier is dropping to 16x when idling.

Attached File  Screen Shot 2012-02-10 at 17.35.14.png   109.93KB   81 downloads

#75
Goron

Goron

    InsanelyMac Sage

  • Members
  • PipPipPipPipPip
  • 338 posts
  • Gender:Male
  • Location:somewhere out there ...
New Nuvoton doesn´t seem to work on Sabertooth P67:

Attached Files



#76
sacaman1

sacaman1

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 113 posts
  • Gender:Male
  • Location:www
Hello every one

please how i can know what kind of chip i have
i have only one partition with OSX and no windows to test
my Mobo is MSI H67MA-E35 B3
and this is the log

Feb 10 21:21:02 imac kernel[0]: W836x: [Warning] found unsupported chip ID=0x10 REVISION=0x7
Feb 10 21:21:02 imac kernel[0]: NCT677x: [Warning] found unsupported chip ID=0x10 REVISION=0x7
Feb 10 21:21:02 imac kernel[0]: IT87x: [Warning] invalid super I/O chip ID=0xffff
Feb 10 21:21:02 imac kernel[0]: F718x: [Warning] found unsupported chip ID=0x10 REVISION=0x7
Feb 10 21:21:06 imac kernel[0]: W836x: [Warning] found unsupported chip ID=0x10 REVISION=0x7
Feb 10 21:21:06 imac kernel[0]: NCT677x: [Warning] found unsupported chip ID=0x10 REVISION=0x7
Feb 10 21:21:06 imac kernel[0]: IT87x: [Warning] invalid super I/O chip ID=0xffff
Feb 10 21:21:06 imac kernel[0]: F718x: [Warning] found unsupported chip ID=0x10 REVISION=0x7
Feb 10 21:21:08 imac kernel[0]: W836x: [Warning] found unsupported chip ID=0x10 REVISION=0x7
Feb 10 21:21:08 imac kernel[0]: NCT677x: [Warning] found unsupported chip ID=0x10 REVISION=0x7
Feb 10 21:21:08 imac kernel[0]: IT87x: [Warning] invalid super I/O chip ID=0xffff
Feb 10 21:21:08 imac kernel[0]: F718x: [Warning] found unsupported chip ID=0x10 REVISION=0x7
Feb 10 21:21:09 imac kernel[0]: W836x: [Warning] found unsupported chip ID=0x10 REVISION=0x7
Feb 10 21:21:09 imac kernel[0]: NCT677x: [Warning] found unsupported chip ID=0x10 REVISION=0x7
Feb 10 21:21:09 imac kernel[0]: IT87x: [Warning] invalid super I/O chip ID=0xffff
Feb 10 21:21:09 imac kernel[0]: F718x: [Warning] found unsupported chip ID=0x10 REVISION=0x7
Feb 10 21:21:09 imac kernel[0]: W836x: [Warning] found unsupported chip ID=0x10 REVISION=0x7
Feb 10 21:21:09 imac kernel[0]: NCT677x: [Warning] found unsupported chip ID=0x10 REVISION=0x7
Feb 10 21:21:09 imac kernel[0]: IT87x: [Warning] invalid super I/O chip ID=0xffff
Feb 10 21:21:09 imac kernel[0]: F718x: [Warning] found unsupported chip ID=0x10 REVISION=0x7
Feb 10 21:21:10 imac kernel[0]: W836x: [Warning] found unsupported chip ID=0x10 REVISION=0x7
Feb 10 21:21:10 imac kernel[0]: NCT677x: [Warning] found unsupported chip ID=0x10 REVISION=0x7
Feb 10 21:21:10 imac kernel[0]: IT87x: [Warning] invalid super I/O chip ID=0xffff
Feb 10 21:21:10 imac kernel[0]: F718x: [Warning] found unsupported chip ID=0x10 REVISION=0x7


thanks for your help

#77
dgsga

dgsga

    I've seen things you people wouldn't believe...

  • Members
  • PipPipPip
  • 155 posts
  • Gender:Male

New Nuvoton doesn´t seem to work on Sabertooth P67:


I get this same message with the new Nuvoton, the chip does not appear to be identified, exactly the same entry in kernel log.

#78
Mohamed Khairy

Mohamed Khairy

    InsanelyMac Deity

  • Members
  • PipPipPipPipPipPipPipPipPipPip
  • 2,169 posts
  • Gender:Male
latest ones
Attached File  4.png   160.95KB   65 downloads

#79
Goron

Goron

    InsanelyMac Sage

  • Members
  • PipPipPipPipPip
  • 338 posts
  • Gender:Male
  • Location:somewhere out there ...
Newest version doesn´t change anything on Sabertooth P67, sadly :(

Attached File  Bildschirmfoto 2012-02-13 um 22.03.16.png   552.62KB   44 downloads

#80
THe KiNG

THe KiNG

    InsanelyMac Legend

  • Gurus
  • 710 posts
  • Gender:Male

Newest version doesn´t change anything on Sabertooth P67, sadly Posted Image

OK,

I fixed NCT677x plugin, at least for my setup but IMHO should work for others too.

Limited the temperatures to 2: Sytem and CPU,, the Auxiliary, as rest of NCT677x capable sensors reading temperature require a much elaborated code since it depends on Vendor implementation (if more then 2 fans are implemented and stuff like that).
OpenHardwareMonitor as Linux code is as best in beta stage, anyway they try to get max 3.

Voltages, only CPU and 3V one are correct, rest require a math(see datasheet and programming guide) and since I cant bet on iStat(it does own math depending on specific key) I need to have them implemented in monitoring app/menuextra, or figure out how to compile those, if possible...

Fans, only 2 are set for now, if you have more just add the desired name on FANINx entry in info.plist.

Enjoy!

Attached File  NCT677x_istat.png   65.33KB   93 downloads
Attached File  HWMonitorExtra.png   23.08KB   84 downloads
Attached File  NuvotonNCT677x.kext.zip   20.39KB   37 downloads
Attached File  NCT677X_fsmc4_source.zip   6.42KB   27 downloads





Also tagged with one or more of these keywords: FakeSMC, Plugins, Hardware Monitoring, Sensors, SuperIO, Temperature, Voltage, Tachometer, Frequency


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

© 2014 InsanelyMac  |   News  |   Forum  |   Downloads  |   OSx86 Wiki  |   Mac Netbook  |   PHP hosting by CatN  |   Designed by Ed Gain  |   Logo by irfan  |   Privacy Policy