CardBus/PCMCIA PC Cards for Leopard

fingerr · February 9, 2008

Hi Mariusz,Here is the IOPCCardFamily. Please try to load it with rev8 IOPCIFamily at the same time to see if the firewire and pccard work (put both files in the extensions folder). Thanks.Chun-Nan
IOPCCardFamily.kext.zip

Hi Chun-Nan,I tried last IOPCCardFamily and only PCMCIA worked (SystemProfiler says unknown device under FireWire), here is dmesg:

PCI configuration changed (BUS free=0 needed=1 added=1)
PCI configuration changed (bridge=0 device=3 yenta=1)
IOPCCard info:   Intel PCIC probe:   TI XX12 rev 00
FireWire (OHCI) TI ID 803a PCI now active, GUID 00080da0d13f83df; max speed s400.
IOPCCard info:   cs: cb_alloc(bus 8): vendor 0x1106, device 0x3038
IOPCCard info:   cs: cb_alloc(bus 8): found 3 functions
IOCardBusDevice: binding socket 0 function 0 to card services.
IOPCCard info:   cs: cb_config(bus 8)
IOPCCard info:     fn 0 bar 2: mem 0xa0004000-0xa00040ff
IOPCCard info:     fn 0 bar 5: io 0x120-0x13f
IOPCCard info:     fn 1 bar 2: mem 0xa0003000-0xa00030ff
IOPCCard info:     fn 1 bar 5: io 0x100-0x11f
IOPCCard info:     fn 2 bar 1: mem 0xa0002000-0xa00020ff
IOPCCard info:     fn 2 bar 2: mem 0xa0001000-0xa00010ff
IOPCCard info:     irq 18
IOCardBusDevice: binding socket 0 function 1 to card services.
IOCardBusDevice: binding socket 0 function 2 to card services.

Regards,Mariusz.

...this version of kext detect only the smarcard reader and the internal firewire.pcmca slot is not detected and it doesn't work.internal firewire still has the dvcam capture problem.kp with latest 10.5.1kext, superclass error if i try manually load the 10.4.1.

Hi snam11,does your CardReader work? Can you post some screen how it's detected in SystemProfiler?

p.s.Mine is visible under windows like this "PCI\VEN_104C&DEV_803C&SUBSYS_FF101179&REV_00\4&6B16D5B&0&33F0". What is your CardReader?

Regards,Mariusz.

snam11 · February 9, 2008

Hi snam11,does your CardReader work? Can you post some screen how it's detected in SystemProfiler?

p.s.Mine is visible under windows like this "PCI\VEN_104C&DEV_803C&SUBSYS_FF101179&REV_00\4&6B16D5B&0&33F0". What is your CardReader?

Regards,Mariusz.

hi mariusz,

you meant my smartcard reader? i dunno if it works or not, is a device for security purposes, like the fingerprint device or similar,'ive never tested it also in windoze.

if you meant multicard reader (mmc,sd,xd,memory stick, etc),my lappy has an integrated one,but is usb, and it works out of the box, but is another device, and not a pcmcia one.

tell me if you need the info for both or which one.

regards

fingerr · February 9, 2008

hi mariusz,
you meant my smartcard reader? i dunno if it works or not, is a device for security purposes, like the fingerprint device or similar,'ive never tested it also in windoze.

if you meant multicard reader (mmc,sd,xd,memory stick, etc),my lappy has an integrated one,but is usb, and it works out of the box, but is another device, and not a pcmcia one.

tell me if you need the info for both or which one.

regards

Ok, I right now I know what you mean

I was talking about multicard reader, mine is also built-in but its not USB, i think it is a part of Texas Instruments FW/PCMCIA controller:

07:06.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller
07:06.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
07:06.3 Generic system peripheral [0805]: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller

Thanks for info Snam11.

~Eureka · February 9, 2008

hi chun-nan

dmesg of test19 with pcmcia card plugged in:

state 0
  [20 I/O] 1860:20
Probing type 0 device class-code 0c0320 at 0:29:7 [cpu 1]
 state 0
  [10 MEM] d0704000:400
Probing type 1 device class-code 060401 at 0:30:0 [cpu 1]
 state 0
  bridge BAR0 0:0
  bridge BAR1 0:0
   bridge bus a:b I/O 0000:0000 MEM d0400000:00100000 PFM 00000000:00000000
Probing type 0 device class-code 060100 at 0:31:0 [cpu 1]
 state 0
Probing type 0 device class-code 010180 at 0:31:2 [cpu 1]
 state 1
  [10 I/O] 0:8
  [14 I/O] 0:4
  [18 I/O] 0:8
  [1c I/O] 0:4
  [20 I/O] 18b0:10
Probing type 0 device class-code 0c0500 at 0:31:3 [cpu 1]
 state 0
  [20 I/O] 18c0:20
Probing type 2 device class-code 060700 at 10:9:0 [cpu 1]
 state 0
   yenta BAR0 d0400000:1000
    yenta bus b:b I/O 0000:0000 MEM 00000000:00000000 PFM 00000000:00000000
Probing type 2 device class-code [color="#ff0000"][b]060700[/b][/color] at 10:9:1 [cpu 1]
[color="#ff0000"][b]  state 1[/b][/color]
   yenta BAR0 0:1000
    yenta bus 0:0 I/O 0000:0000 MEM 00000000:00000000 PFM 00000000:00000000
Probing type 0 device class-code [b][color="#ff0000"]0c0010[/color][/b] at 10:9:4 [cpu 1]
[color="#ff0000"][b]  state 1[/b][/color]
  [10 MEM] 0:1000
  [14 MEM] d0403000:800
Probing type 0 device class-code [color="#000000"]028000[/color] at 5:0:0 [cpu 1]
[color="#000000"]  state 1[/color]
  [10 MEM] 0:1000
Probing type 0 device class-code [color="#ff0000"][b]020000[/b][/color] at 3:0:0 [cpu 1]
[color="#ff0000"][b]  state 1[/b][/color]
  [10 MEM] 0:20000
  [14 MEM] 0:100000
  [18 I/O] 0:20
Probing type 0 device class-code [color="#000000"]030000[/color] at 1:0:0 [cpu 1]
[color="#000000"]  state 1[/color]
  [10 PFM] c0000000:10000000
  [14 I/O] 2000:100
  [18 MEM] d0200000:10000
  [30 MEM] 0:20000
pciBridgeAllocateResource(bus 10, state 0)
Allocating resources on bus 10
 clipped bridge MEM range head to d0401000:ff000 for d0400000:1000 overlap 1000
 MEM: sub-range outside parent range: 0xd0400000:0x1000
 MEM: 3 sub-range limited to 55000 each
 BUS: 1 sub-range limited to 0 each
 MEM: allocated block d0401000:1000
 MEM: allocated block d0402000:800
 MEM: allocated block d0403000:1000
pciBridgeDistributeResource(bus 10, state 2)
Distribute resources for bus 10
 MEM: total size ff000, required size 3800, maximize count 0
 MEM: assigned block d0401000:1000
 MEM: assigned block d0402000:1000
 MEM: assigned block d0403000:1000
 MEM: assigned block d0404000:800
 BUS: total size 1, required size 2, maximize count 0
 BUS: assigned block b:1
 BUS: assigned block c:1
Applying config for device 10:9:4
 bar 0x10 = d0403000
 bar 0x14 = d0404000
 Device Command = 02100015
Applying config for bridge serving bus 12
 MEM: start/size = 00000000:00000000
 I/O: start/size = 00000000:00000000
 BUS: start/size = 0000000c:00000001
 bar 0x10 = d0402000
 Regs:
 BUS: prim/sec/sub = 0a:0c:0c
Enabling bridge serving bus 12
 Bridge Command    = 04100087
PCI configuration changed (bridge=0 device=1 yenta=1)

Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
mbinit: done
Security auditing service present
BSM auditing present
Starting AppleACPIPS2Nub
Found mouse PNP device
AppleACPIPS2Nub startup complete
From path: "uuid", 
Waiting for boot volume with UUID F4EDFD34-C9E7-3FF1-A157-8A7E8C92493B
Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
IOPCCard info:   Intel PCIC probe:   O2Micro OZ711MP1/MS1 rev 21
IOPCCard info:   Intel PCIC probe: 
IOPCCard notice:   Bad bridge mapping at 0xd0400000!
not found.
IOPCCardBridge::start failed
FireWire (OHCI) VendorID 1217 ID f7 PCI now active, GUID 009fc0001a119e00; max speed s400.
IOPCCard info:   cs: memory probe 0xa0000000-0xa0ffffff: clean.
IOPCCard16Device: binding socket 0 function 0 to card services.
Extension "com.apple.driver.iTunesPhoneDriver" has no explicit kernel dependency; using version 6.0.
Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/USB7@1D,7/AppleUSBEHCI/NOONTEC USB Storage@fd410000/MSC Bulk-Only Transfer@0/IOUSBMassStorageClass/IOSCSIPeripheralDeviceNub/IOSCSIPeripheralDeviceType00/IOBlockStorageServices/IOBlockStorageDriver/Maxtor 6 AD1G Media/IOFDiskPartitionScheme/Untitled 1@1
BSD root: disk1s1, major 14, minor 3

this version of kext detect only the smarcard reader and the internal firewire.

pcmca slot is not detected and it doesn't work.

internal firewire still has the dvcam capture problem.

kp with latest 10.5.1kext, superclass error if i try manually load the 10.4.1.

Hi snam11,

Thanks for the info. According to the dmesg, as long as the state = 1, it means that device/bridge needs to be assigned resources (or fixed). It probably explains why in the beginning, your firewire, pccard, smartcard and even ethernet don't work.

class-code 0c0010: firewire.

class-code 020000: ethernet.

class-code 060700: pccard bridge.

etc.

Because firewire and pccard bridge(yenta) are on the same bridge, when I tried to fix the pccard bridge, it will fixed the firewire device at the same time. However, Ethernet is on another bridge. (I guess on your machine, there are probably some devices still don't work even though you have thr drivers for them.)

The other issue on your machine is that you have two pccard bridges (yenta) in the same bridge, one for pcmcia, one for smartcard reader. I still haven't firgured how to arrange the resource for them. It seems that if one works, the other doesn't work........ (very changelling )

I will try to gather more information and let you know. Thanks.

Chun-Nan

snam11 · February 9, 2008

Hi snam11,

Thanks for the info. According to the dmesg, as long as the state = 1, it means that device/bridge needs to be assigned resources (or fixed). It probably explains why in the beginning, your firewire, pccard, smartcard and even ethernet don't work.

class-code 0c0010: firewire.

class-code 020000: ethernet.

class-code 060700: pccard bridge.

etc.

Because firewire and pccard bridge(yenta) are on the same bridge, when I tried to fix the pccard bridge, it will fixed the firewire device at the same time. However, Ethernet is on another bridge. (I guess on your machine, there are probably some devices still don't work even though you have thr drivers for them.)

The other issue on your machine is that you have two pccard bridges (yenta) in the same bridge, one for pcmcia, one for smartcard reader. I still haven't firgured how to arrange the resource for them. It seems that if one works, the other doesn't work........ (very changelling )

I will try to gather more information and let you know. Thanks.

Chun-Nan

hi chun-nan,

thanx for the info.

i'm glad my lappy hardware is very interesting and challenging for you skills, i'll not prevent you with your develop/testing for it

but as you already know, a working pcmcia is enough for me because of the firewire pcmcia card i have.

i'd prefere to have a working nic.you think you can "revive" it?

regards

~Eureka · February 9, 2008

hi chun-nan,

thanx for the info.

i'm glad my lappy hardware is very interesting and challenging for you skills, i'll not stop you keep on tryn'/developing for it

but as you already know, a working pcmcia is enough for me because of the firewire pcmcia card i have.

i'd prefere to have a working nic.you think you can "revive" it?

regards

Hi snam11,

I think it should work as long as I can find the solution as I did for pccard.

However, it might take time because I don't have the same equipment like you do, need to a lot of test........

BTW, I heard 10.5.2 is coming out soon. Do you think it will have some effects on those issues?

Chun-Nan

======================

Hi Mariusz,

Thanks for the info.

The pccard driver Apple uses is ported from out-of-dated linux driver. Therefore, I don't know if it will really function correctly or not. (registers setting, etc.) However, I will keep looking for the solution unless others find the better ways.

If possible, you may still need to load pccardfamily after firewirefamily.

BTW, if possible, can you try the test19 and show me your dmesg like snam11 did? Thanks.

Chun-Nan

snam11 · February 9, 2008

Hi snam11,

I think it should work as long as I can find the solution as I did for pccard.

However, it might take time because I don't have the same equipment like you do, need to a lot of test........

BTW, I heard 10.5.2 is coming out soon. Do you think it will have some effects on those issues?

Chun-Nan

hi chun-nan

it would be a great thing if 10.5.2 could fix all the issues, but i doubt.

nothing changed from tiger to leopard, so is prolly same from 10.5.1 to 10.5.2, but never say never....

however, let me know if i can help you somehow....

regards.

~Eureka · February 9, 2008

hi chun-nan
it would be a great thing if 10.5.2 could fix all the issues, but i doubt.

nothing changed from tiger to leopard, so is prolly same from 10.5.1 to 10.5.2, but never say never....

however, let me know if i can help you somehow....

regards.

Hi snam11,

Here is the information on class code and configruator table (device and bridge).

http://www.acm.uiuc.edu/sigops/roll_your_own/7.c.1.html

http://developer.apple.com/documentation/H...CI_BOOK.54.html

http://developer.apple.com/documentation/H...CI_BOOK.57.html

Chun-Nan

fingerr · February 9, 2008

Hi Mariusz,

Thanks for the info.

The pccard driver Apple uses is ported from out-of-dated linux driver. Therefore, I don't know if it will really function correctly or not. (registers setting, etc.) However, I will keep looking for the solution unless others find the better ways.

If possible, you may still need to load pccardfamily after firewirefamily.

BTW, if possible, can you try the test19 and show me your dmesg like snam11 did? Thanks.

Chun-Nan

Hi Chun-Nan,

you have 'awaken' my PCMCIA slot, so big kudo's to you man. I'm looking forward for updated releases from you to add life to life:)

Here is dmesg from test19 (SysProfiler says Unknown Device under FW tab):

at 0:29:3 [cpu 0]
 state 0
  [20 I/O] 1860:20
Probing type 0 device class-code 0c0320 at 0:29:7 [cpu 0]
 state 0
  [10 MEM] f0c04000:400
Probing type 1 device class-code 060401 at 0:30:0 [cpu 0]
 state 0
  bridge BAR0 0:0
  bridge BAR1 0:0
   bridge bus 7:7 I/O 0000:0000 MEM f0900000:00100000 PFM 00000000:00000000
Probing type 0 device class-code 060100 at 0:31:0 [cpu 0]
 state 0
Probing type 0 device class-code 010180 at 0:31:2 [cpu 0]
 state 1
  [10 I/O] 0:8
  [14 I/O] 0:4
  [18 I/O] 0:8
  [1c I/O] 0:4
  [20 I/O] 18b0:10
Probing type 0 device class-code 0c0500 at 0:31:3 [cpu 0]
 state 0
  [20 I/O] 18c0:20
Probing type 2 device class-code 060700 at 7:6:0 [cpu 0]
 state 1
   yenta BAR0 0:1000
    yenta bus 0:0 I/O 0000:0000 MEM 00000000:00000000 PFM 00000000:00000000
Probing type 0 device class-code 0c0010 at 7:6:1 [cpu 0]
 state 0
  [10 MEM] f0905000:800
  [14 MEM] f0900000:4000
Probing type 0 device class-code 018000 at 7:6:2 [cpu 0]
 state 0
  [10 MEM] f0904000:1000
Probing type 0 device class-code 080501 at 7:6:3 [cpu 0]
 state 0
  [10 MEM] f0905800:100
Probing type 0 device class-code 028000 at 5:0:0 [cpu 0]
 state 0
  [10 MEM] f0800000:4000
Probing type 0 device class-code 020000 at 2:0:0 [cpu 0]
 state 0
  [10 MEM] f0600000:20000
  [18 I/O] 3000:20
Probing type 0 device class-code 030000 at 1:0:0 [cpu 0]
 state 1
  [10 PFM] d0000000:10000000
  [14 I/O] 2000:100
  [18 MEM] cfef0000:10000
  [30 MEM] 0:20000
pciBridgeAllocateResource(bus 7, state 0)
Allocating resources on bus 7
 clipped bridge MEM range head to f0904000:fc000 for f0900000:4000 overlap 4000
 MEM: sub-range outside parent range: 0xf0900000:0x4000
PCI configuration changed (BUS free=0 needed=1 added=1)
 MEM: 1 sub-range limited to fa700 each
 BUS: 1 sub-range limited to 0 each
 MEM: allocated block f0906000:1000
pciBridgeDistributeResource(bus 7, state 2)
Distribute resources for bus 7
 MEM: total size fc000, required size 6900, maximize count 0
 MEM: assigned block f0904000:4000
 MEM: assigned block f0908000:1000
 MEM: assigned block f0909000:1000
 MEM: assigned block f090a000:800
 MEM: assigned block f090a800:100
 BUS: total size 0, required size 1, maximize count 0
 BUS: assigned block 8:1
Applying config for device 7:6:3
 bar 0x10 = f090a800
 Device Command = 02100006
Applying config for device 7:6:2
 bar 0x10 = f0909000
 Device Command = 02100006
Applying config for device 7:6:1
 bar 0x10 = f090a000
 bar 0x14 = f0904000
 Device Command = 02100006
Applying config for bridge serving bus 8
 MEM: start/size = 00000000:00000000
 I/O: start/size = 00000000:00000000
 BUS: start/size = 00000008:00000001
 bar 0x10 = f0908000
 Regs:
 BUS: prim/sec/sub = 07:08:08
Enabling bridge serving bus 8
 Bridge Command    = 02100007
PCI configuration changed (bridge=0 device=3 yenta=1)
IOPCCard info:   Intel PCIC probe:   TI XX12 rev 00
FireWire (OHCI) TI ID 803a PCI now active, GUID 00080da0d13f83df; max speed s400.
IOPCCard info:   cs: cb_alloc(bus 8): vendor 0x1106, device 0x3038
IOPCCard info:   cs: cb_alloc(bus 8): found 3 functions
IOCardBusDevice: binding socket 0 function 0 to card services.
IOPCCard info:   cs: cb_config(bus 8)
IOPCCard info:     fn 0 bar 2: mem 0xa0004000-0xa00040ff
IOPCCard info:     fn 0 bar 5: io 0x120-0x13f
IOPCCard info:     fn 1 bar 2: mem 0xa0003000-0xa00030ff
IOPCCard info:     fn 1 bar 5: io 0x100-0x11f
IOPCCard info:     fn 2 bar 1: mem 0xa0002000-0xa00020ff
IOPCCard info:     fn 2 bar 2: mem 0xa0001000-0xa00010ff
IOPCCard info:     irq 18
IOCardBusDevice: binding socket 0 function 1 to card services.
IOCardBusDevice: binding socket 0 function 2 to card services.

Regards,

Mariusz

~Eureka · February 9, 2008

hi chun-nan
it would be a great thing if 10.5.2 could fix all the issues, but i doubt.

nothing changed from tiger to leopard, so is prolly same from 10.5.1 to 10.5.2, but never say never....

however, let me know if i can help you somehow....

regards.

Hi snam11,

Here is the test20 IOPCIFamily. Try it and let me know the result under singleuser mode (one dmesg is enough). Thanks.

Chun-Nan

IOPCIFamily.test20.zip

Hi snam11 and Mariusz,

I am just curious. Both of you have class-code 030000, do you guys have AGP video device or other kind video device?

Chun-Nan

fingerr · February 9, 2008

Hi snam11,

Here is the test20 IOPCIFamily. Try it and let me know the result under singleuser mode (one dmesg is enough). Thanks.

Chun-Nan

Hi snam11 and Mariusz,

I am just curious. Both of you have class-code 030000, do you guys have AGP video device?

Chun-Nan

Hi Chun-Nan,

i don't have AGP card, mine is built in PCIe ATI x1600

p.s.

I think test19 causes loginwindow app not to start (sometimes I have problems with my ATI, but tried treee times to boot and loginwindow hanged). I fall back to rev8).

Regards,

Mariusz.

~Eureka · February 9, 2008

Hi Chun-Nan,

i don't have AGP card, mine is built in PCIe ATI x1600

p.s.

I think test19 causes loginwindow app not to start (sometimes I have problems with my ATI, but tried treee times to boot and loginwindow hanged). I fall back to rev8).

Regards,

Mariusz.

Hi Mariusz,

You mean sometimes you have problems with your ATI while using the original IOPCIFamily or rev8 IOPCIFamily?

Chun-Nan

snam11 · February 9, 2008

Hi snam11,

Here is the test20 IOPCIFamily. Try it and let me know the result under singleuser mode (one dmesg is enough). Thanks.

Chun-Nan

IOPCIFamily.test20.zip

Hi snam11 and Mariusz,

I am just curious. Both of you have class-code 030000, do you guys have AGP video device or other kind video device?

Chun-Nan

hi chun-nan

here is my dmesg:

de 060400 at 0:28:2 [cpu 0]
 bridge BAR0 sizes 0:0
 bridge BAR1 sizes 0:0
   bridge bus 4:4 I/O 0000:1000 MEM 00000000:00000000 PFM 00000000:00100000
Probing type 1 device class-code 060400 at 0:28:3 [cpu 0]
 bridge BAR0 sizes 0:0
 bridge BAR1 sizes 0:0
   bridge bus 5:5 I/O 0000:1000 MEM 00000000:00000000 PFM 00000000:00100000
Probing type 1 device class-code 060400 at 0:28:4 [cpu 0]
 bridge BAR0 sizes 0:0
 bridge BAR1 sizes 0:0Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.

   bridge bus 6:6 I/O 0000:1000 MEM 00000000:00000000 PFM 00000000:00100000
Probing type 1 device class-code 060400 at 0:28:5 [cpu 0]
 bridge BAR0 sizes 0:0
 bridge BAR1 sizes 0:0
   bridge bus 7:9 I/O 0000:1000 MEM 00000000:00000000 PFM 00000000:00100000
Probing type 0 device class-code 0c0300 at 0:29:0 [cpu 0]
  [20 I/O] 1800:20
Probing type 0 device class-code 0c0300 at 0:29:1 [cpu 0]
  [20 I/O] 1820:20
Probing type 0 device class-code 0c0300 at 0:29:2 [cpu 0]Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.

  [20 I/O] 1840:20
Probing type 0 device class-code 0c0300 at 0:29:3 [cpu 0]
  [20 I/O] 1860:20
Probing type 0 device class-code 0c0320 at 0:29:7 [cpu 0]
  [10 MEM] d0704000:400
Probing type 1 device class-code 060401 at 0:30:0 [cpu 0]
 bridge BAR0 sizes 0:0
 bridge BAR1 sizes 0:0
   bridge bus a:b I/O 0000:0000 MEM d0400000:00100000 PFM 00000000:00000000
Probing type 0 device class-code 060100 at 0:31:0 [cpu 0]
Probing type 0 device class-code 010180 at 0:31:2 [cpu 0]
  [10 I/O] 0:8
  [14 I/O] 0:4
  [18 I/O] 0:8
  [1c I/O] 0:4
  [20 I/O] 18b0:10
Probing type 0 device class-code 0c0500 at 0:31:3 [cpu 0]
  [20 I/O] 18c0:20
Probing type 2 device class-code 060700 at 10:9:0 [cpu 0]
  yenta BAR0 sizes d0400000:1000
    yenta bus b:b I/O 0000:0000 MEM 00000000:00000000 PFM 00000000:00000000
Probing type 2 device class-code 060700 at 10:9:1 [cpu 0]
  yenta BAR0 sizes 0:1000
    yenta bus 0:0 I/O 0000:0000 MEM 00000000:00000000 PFM 00000000:00000000
Probing type 0 device class-code 0c0010 at 10:9:4 [cpu 0]
  [10 MEM] 0:1000
  [14 MEM] d0403000:800
Probing type 0 device class-code 028000 at 5:0:0 [cpu 0]
  [10 MEM] 0:1000
Probing type 0 device class-code 020000 at 3:0:0 [cpu 0]
  [10 MEM] 0:20000
  [14 MEM] 0:100000
  [18 I/O] 0:20
Probing type 0 device class-code 030000 at 1:0:0 [cpu 0]
  [10 PFM] c0000000:10000000
  [14 I/O] 2000:100
  [18 MEM] d0200000:10000
  [30 MEM] 0:20000
PCI configuration changed (bridge=0 device=3 yenta=1)
Starting AppleACPIPS2Nub
Found mouse PNP device
AppleACPIPS2Nub startup complete
mbinit: done
Security auditing service present
BSM auditing present
From path: "uuid", 
Waiting for boot volume with UUID F4EDFD34-C9E7-3FF1-A157-8A7E8C92493B
Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
IOPCCard info:   Intel PCIC probe:   O2Micro OZ711MP1/MS1 rev 21
IOPCCard info:   Intel PCIC probe: 
IOPCCard notice:   Bad bridge mapping at 0xd0400000!
not found.
IOPCCardBridge::start failed
FireWire (OHCI) VendorID 1217 ID f7 PCI now active, GUID 009fc0001a119e00; max speed s400.
IOPCCard info:   cs: memory probe 0xa0000000-0xa0ffffff: clean.
IOPCCard16Device: binding socket 0 function 0 to card services.
Extension "com.apple.driver.iTunesPhoneDriver" has no explicit kernel dependency; using version 6.0.
Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/USB7@1D,7/AppleUSBEHCI/NOONTEC USB Storage@fd410000/MSC Bulk-Only Transfer@0/IOUSBMassStorageClass/IOSCSIPeripheralDeviceNub/IOSCSIPeripheralDeviceType00/IOBlockStorageServices/IOBlockStorageDriver/Maxtor 6 AD1G Media/IOFDiskPartitionScheme/Untitled 1@1
BSD root: disk1s1, major 14, minor 3
USBF:	7.758	AppleUSBEHCI[0x394f000]::Found a transaction which hasn't moved in 5 seconds on bus 0xfd, timing out! (Addr: 3, EP: 0)

with this release olnly internal firewire and smartcard reader works. internal firewire has same issues as before.

kp with 10.5.1 lan, superclass error with 10.4.1

talking about agp, i don't think this lappy has one. the vga is a pci-e ati x1600 mobile with dvi,vga, and svhs output.

maybe the acer extention connector has the agp bus, but i've never used an acer docking station so i cannot tell for sure.

like mariusz said, also for me sometimes the graphic application won't start (well it starts, but the graphic mode is not initializated in proper way and nothing comes up on screen, only white and black vertical rows), but is an atiinject random problem, i'm pretty sure is not related to your kext.

i had those random little problems before your "magic" set of kext.

regards

~Eureka · February 10, 2008

Hi snam11 and kizwan,

Here is the IOPCIFamily. When you load it, you will see the information on dmesg like this:

===================================

BUS: 00:00:00 MEM: 00000000 PFM: 00000000 I/O: 0000

BUS: 00:05:06 MEM: d020d020 PFM: 0001fff1 I/O: 00f0

BUS: 00:03:03 MEM: d010d010 PFM: 0001fff1 I/O: 00f0

BUS: 00:02:02 MEM: d000d000 PFM: 0001fff1 I/O: 2020

BUS: 05:06:06 MEM: 00000000 PFM: 00000000 I/O: 0000

===================================

Please let me know the result from your machine. Thanks.

Chun-Nan

IOPCIFamily.info.only.zip

snam11 · February 10, 2008

Hi snam11 and kizwan,

Here is the IOPCIFamily. When you load it, you will see the information on dmesg like this:

===================================

BUS: 00:00:00 MEM: 00000000 PFM: 00000000 I/O: 0000

BUS: 00:05:06 MEM: d020d020 PFM: 0001fff1 I/O: 00f0

BUS: 00:03:03 MEM: d010d010 PFM: 0001fff1 I/O: 00f0

BUS: 00:02:02 MEM: d000d000 PFM: 0001fff1 I/O: 2020

BUS: 05:06:06 MEM: 00000000 PFM: 00000000 I/O: 0000

===================================

Please let me know the result from your machine. Thanks.

Chun-Nan

IOPCIFamily.info.only.zip

hi chun-nan

here is my dmesg:

Waiting for boot volume with UUID F4EDFD34-C9E7-3FF1-A157-8A7E8C92493B
Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
 BUS: 00:00:00  MEM: 00000000  PFM: 00000000  I/O: 0000
 BUS: 00:0a:0b  MEM: d040d040  PFM: 0001fff1  I/O: 00f0
 BUS: 00:07:09  MEM: 00000000  PFM: 00010001  I/O: 0000
 BUS: 00:06:06  MEM: 00000000  PFM: 00010001  I/O: 0000
 BUS: 00:05:05  MEM: 00000000  PFM: 00010001  I/O: 0000
 BUS: 00:04:04  MEM: 00000000  PFM: 00010001  I/O: 0000
 BUS: 00:03:03  MEM: 00000000  PFM: 00010001  I/O: 0000
 BUS: 00:02:02  MEM: 00000000  PFM: 00010001  I/O: 0000
 BUS: 00:01:01  MEM: d020d020  PFM: cff1c001  I/O: 2020
 BUS: 00:00:00  MEM: 00000000  PFM: 00000000  I/O: 0000
 BUS: 0a:0b:0b  MEM: 000ff000  PFM: 00000000  I/O: 0000
PCI configuration changed (BUS free=1 needed=2 added=1)
PCI configuration changed (bridge=0 device=3 yenta=2)
IOPCCard info:   Intel PCIC probe:   O2Micro OZ711MP1/MS1 rev 21
IOPCCard info:   Intel PCIC probe: 
IOPCCard notice:   Bad bridge mapping at 0xd0401000!
not found.
IOPCCardBridge::start failed
FireWire (OHCI) VendorID 1217 ID f7 PCI now active, GUID 009fc0001a119e00; max speed s400.
IOPCCard info:   cs: cb_alloc(bus 11): vendor 0x104c, device 0x8025
IOPCCard info:   cs: cb_alloc(bus 11): found 1 functions
IOCardBusDevice: binding socket 0 function 0 to card services.
IOPCCard info:   cs: cb_config(bus 11)
IOPCCard info:     fn 0 bar 1: mem 0xa0004000-0xa00047ff
IOPCCard info:     fn 0 bar 2: mem 0xa0000000-0xa0003fff
IOPCCard info:     irq 20
FireWire (OHCI) TI ID 8025 CardBus now active, GUID 000108000000fbf8; max speed s800.
Extension "com.apple.driver.iTunesPhoneDriver" has no explicit kernel dependency; using version 6.0.
Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/USB7@1D,7/AppleUSBEHCI/NOONTEC USB Storage@fd410000/MSC Bulk-Only Transfer@0/IOUSBMassStorageClass/IOSCSIPeripheralDeviceNub/IOSCSIPeripheralDeviceType00/IOBlockStorageServices/IOBlockStorageDriver/Maxtor 6 AD1G Media/IOFDiskPartitionScheme/Untitled 1@1
BSD root: disk1s1, major 14, minor 3
jnl: unknown-dev: replay_journal: from: 5874176 to: 2977280 (joffset 0x142000)
jnl: unknown-dev: journal replay done.
USBF:	7.448	AppleUSBEHCI[0x3898000]::Found a transaction which hasn't moved in 5 seconds on bus 0xfd, timing out! (Addr: 3, EP: 0)
HFS: Removed 1 orphaned unlinked files or directories

this release enables pcmcia and firewire.

max pcmcia fw speed limited to max speed of internal fw (400), dv cam issues with internal fw as always.

kp with lan 10.5.1, superclass error with 10.4.1

regards.

OldSchool-c- · February 10, 2008

Hi, i stay try the rev v8 on my HP nx6110.

At boot (-v option) after detect the Chipset (IOPCard info: Intel PCIC probe: TI XX21 ev 00) the sequence of boot is in hang with this message:

bfe0: BUG! Timeout waiting for bit 00000002 of register 42c to clear

I stay using KALA leo 1.0.5.1 fresh install

kizwan · February 10, 2008

Hi snam11 and kizwan,

Here is the IOPCIFamily. When you load it, you will see the information on dmesg like this:

===================================

BUS: 00:00:00 MEM: 00000000 PFM: 00000000 I/O: 0000

BUS: 00:05:06 MEM: d020d020 PFM: 0001fff1 I/O: 00f0

BUS: 00:03:03 MEM: d010d010 PFM: 0001fff1 I/O: 00f0

BUS: 00:02:02 MEM: d000d000 PFM: 0001fff1 I/O: 2020

BUS: 05:06:06 MEM: 00000000 PFM: 00000000 I/O: 0000

===================================

Please let me know the result from your machine. Thanks.

Chun-Nan

IOPCIFamily.info.only.zip

Hi Chun-Nan,

Here is my dmesg under single user mode:-

MAC Framework successfully initialized
using 7864 buffer headers and 4096 cluster IO buffer headers
IOAPIC: Version 0x20 Vectors 64:87
ACPI: System State [s0 S3 S4 S5] (S3)
Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
 BUS: 00:00:00  MEM: 00000000  PFM: 00000000  I/O: 0000
 BUS: 00:0a:0b  MEM: d020d020  PFM: 0001fff1  I/O: 00f0
 BUS: 00:04:04  MEM: 00000000  PFM: 00010001  I/O: 0000
 BUS: 00:03:03  MEM: 00000000  PFM: 00010001  I/O: 0000
 BUS: 00:02:02  MEM: 00000000  PFM: 00010001  I/O: 0000
 BUS: 0a:0b:0b  MEM: 00000000  PFM: 00000000  I/O: 0000
PCI configuration changed (bridge=0 device=3 yenta=1)
Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
mbinit: done
Security auditing service present
BSM auditing present
From path: "uuid", 
Waiting for boot volume with UUID 4AD69838-01FC-32D5-AC59-20723C674F1C
Waiting on IOProviderClassIOResourcesIOResourceMatchboot-uuid-media
Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
Starting AppleACPIPS2Nub
Found mouse PNP device
AppleACPIPS2Nub startup complete
Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
IOPCCard info:   Intel PCIC probe:   TI XX12 rev 00
Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPIIXATARoot/PRID@0/AppleIntelICHxSATA/ATADeviceNub@0/IOATABlockStorageDriver/IOATABloc
kStorageDevice/IOBlockStorageDriver/ST980811AS Media/IOFDiskPartitionScheme/Untitled 2@2
BSD root: disk0s2, major 14, minor 2
IOPCCard info:   cs: cb_alloc(bus 11): vendor 0x14e4, device 0x4318
IOPCCard info:   cs: cb_alloc(bus 11): found 1 functions
IOCardBusDevice: binding socket 0 function 0 to card services.
IOPCCard info:   cs: cb_config(bus 11)
IOPCCard info:     fn 0 bar 1: mem 0xa0002000-0xa0003fff
IOPCCard info:     irq 20

IOPCCardFamily.kext is from rev8. I also attached here the full dmesg from single user mode.

Thank you.

dmesg_kizwan_iopci_info.txt

~Eureka · February 10, 2008

Hi snam11 and kizwan,

Here is another IOPCIFamily. When you load it, you will see the information on dmesg like this:

===================================

BUS: 00:02:02 MEM: d000d000 PFM: 0001fff1 I/O: 2020

BUS: 00:03:03 MEM: d010d010 PFM: 0001fff1 I/O: 00f0

BUS: 00:05:06 MEM: d020d020 PFM: 0001fff1 I/O: 00f0

[03] I/O: 20

[03] MEM: d000

BUS: 00:02:02 MEM: d000d000 PFM: 0001fff1 I/O: 2020

BUS: 00:03:03 MEM: d010d010 PFM: 0001fff1 I/O: 00f0

BUS: 00:05:06 MEM: d020d020 PFM: 0001fff1 I/O: 00f0

BUS: 00:02:02 MEM: d000d000 PFM: 0001fff1 I/O: 2020

BUS: 00:03:03 MEM: d010d010 PFM: 0001fff1 I/O: 00f0

BUS: 00:05:06 MEM: d020d020 PFM: 0001fff1 I/O: 00f0

===================================

Please let me know the result from your machine. Thanks.

Chun-Nan

IOPCIFamily.info.only2.zip

snam11 · February 10, 2008

Hi snam11 and kizwan,

Here is another IOPCIFamily. When you load it, you will see the information on dmesg like this:

===================================

BUS: 00:02:02 MEM: d000d000 PFM: 0001fff1 I/O: 2020

BUS: 00:03:03 MEM: d010d010 PFM: 0001fff1 I/O: 00f0

BUS: 00:05:06 MEM: d020d020 PFM: 0001fff1 I/O: 00f0

[03] I/O: 20

[03] MEM: d000

BUS: 00:02:02 MEM: d000d000 PFM: 0001fff1 I/O: 2020

BUS: 00:03:03 MEM: d010d010 PFM: 0001fff1 I/O: 00f0

BUS: 00:05:06 MEM: d020d020 PFM: 0001fff1 I/O: 00f0

BUS: 00:02:02 MEM: d000d000 PFM: 0001fff1 I/O: 2020

BUS: 00:03:03 MEM: d010d010 PFM: 0001fff1 I/O: 00f0

BUS: 00:05:06 MEM: d020d020 PFM: 0001fff1 I/O: 00f0

===================================

Please let me know the result from your machine. Thanks.

Chun-Nan

IOPCIFamily.info.only2.zip

hi chun-nan

my dmesg:

Loading security extension com.apple.security.seatbelt
calling mpo_policy_init for mb
Seatbelt MACF policy initialized
Security policy loaded: Seatbelt Policy (mb)
Copyright © 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.

MAC Framework successfully initialized
using 10485 buffer headers and 4096 cluster IO buffer headers
IOAPIC: Version 0x20 Vectors 64:87
ACPI: System State [s0 S3 S4 S5] (S3)
Extension "com.apple.driver.ApplePCIConfigurator" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
mbinit: done
Security auditing service present
BSM auditing present
Starting AppleACPIPS2Nub
Found mouse PNP device
AppleACPIPS2Nub startup complete
Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
From path: "uuid", 
Waiting for boot volume with UUID F4EDFD34-C9E7-3FF1-A157-8A7E8C92493B
Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
 BUS: 00:01:01  MEM: d020d020  PFM: cff1c001  I/O: 2020
 BUS: 00:02:02  MEM: 00000000  PFM: 00010001  I/O: 0000
 BUS: 00:03:03  MEM: 00000000  PFM: 00010001  I/O: 0000
 BUS: 00:04:04  MEM: 00000000  PFM: 00010001  I/O: 0000
 BUS: 00:05:05  MEM: 00000000  PFM: 00010001  I/O: 0000
 BUS: 00:06:06  MEM: 00000000  PFM: 00010001  I/O: 0000
 BUS: 00:07:09  MEM: 00000000  PFM: 00010001  I/O: 0000
 BUS: 00:0a:0b  MEM: d040d040  PFM: 0001fff1  I/O: 00f0
[08] I/O: 20 
[08] MEM: d020 
 BUS: 00:01:01  MEM: d020d020  PFM: cff1c001  I/O: 2020
 BUS: 00:03:03  MEM: 00000000  PFM: 00010001  I/O: 0000
 BUS: 00:05:05  MEM: 00000000  PFM: 00010001  I/O: 0000
 BUS: 00:0a:0b  MEM: d040d040  PFM: 0001fff1  I/O: 00f0
 BUS: 00:01:01  MEM: d020d020  PFM: cff1c001  I/O: 2020
 BUS: 00:02:02  MEM: 00000000  PFM: 00010001  I/O: 0000
 BUS: 00:03:03  MEM: 00000000  PFM: 00010001  I/O: 0000
 BUS: 00:04:04  MEM: 00000000  PFM: 00010001  I/O: 0000
 BUS: 00:05:05  MEM: 00000000  PFM: 00010001  I/O: 0000
 BUS: 00:06:06  MEM: 00000000  PFM: 00010001  I/O: 0000
 BUS: 00:07:09  MEM: 00000000  PFM: 00010001  I/O: 0000
 BUS: 00:0a:0b  MEM: d040d040  PFM: 0001fff1  I/O: 00f0
PCI configuration changed (BUS free=1 needed=2 added=1)
PCI configuration changed (bridge=0 device=3 yenta=2)
IOPCCard info:   Intel PCIC probe:   O2Micro OZ711MP1/MS1 rev 21
IOPCCard info:   Intel PCIC probe: 
IOPCCard notice:   Bad bridge mapping at 0xd0401000!
not found.
IOPCCardBridge::start failed
FireWire (OHCI) VendorID 1217 ID f7 PCI now active, GUID 009fc0001a119e00; max speed s400.
IOPCCard info:   cs: cb_alloc(bus 11): vendor 0x104c, device 0x8025
IOPCCard info:   cs: cb_alloc(bus 11): found 1 functions
IOCardBusDevice: binding socket 0 function 0 to card services.
IOPCCard info:   cs: cb_config(bus 11)
IOPCCard info:     fn 0 bar 1: mem 0xa0004000-0xa00047ff
IOPCCard info:     fn 0 bar 2: mem 0xa0000000-0xa0003fff
IOPCCard info:     irq 20
FireWire (OHCI) TI ID 8025 CardBus now active, GUID 000108000000fbf8; max speed s800.
Extension "com.apple.driver.iTunesPhoneDriver" has no explicit kernel dependency; using version 6.0.
Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/USB7@1D,7/AppleUSBEHCI/NOONTEC USB Storage@fd410000/MSC Bulk-Only Transfer@0/IOUSBMassStorageClass/IOSCSIPeripheralDeviceNub/IOSCSIPeripheralDeviceType00/IOBlockStorageServices/IOBlockStorageDriver/Maxtor 6 AD1G Media/IOFDiskPartitionScheme/Untitled 1@1
BSD root: disk1s1, major 14, minor 3

tested in standard mode, same issues as previuos release.

also with kp

regards

Slice · February 10, 2008

Hi, i stay try the rev v8 on my HP nx6110.

At boot (-v option) after detect the Chipset (IOPCard info: Intel PCIC probe: TI XX21 ev 00) the sequence of boot is in hang with this message:

bfe0: BUG! Timeout waiting for bit 00000002 of register 42c to clear

I stay using KALA leo 1.0.5.1 fresh install

This is a message from Ethernet Broadcom. It appears when you restart from windows to mac

kizwan · February 11, 2008

Hi snam11 and kizwan,

Here is another IOPCIFamily. When you load it, you will see the information on dmesg like this:

===================================

BUS: 00:02:02 MEM: d000d000 PFM: 0001fff1 I/O: 2020

BUS: 00:03:03 MEM: d010d010 PFM: 0001fff1 I/O: 00f0

BUS: 00:05:06 MEM: d020d020 PFM: 0001fff1 I/O: 00f0

[03] I/O: 20

[03] MEM: d000

BUS: 00:02:02 MEM: d000d000 PFM: 0001fff1 I/O: 2020

BUS: 00:03:03 MEM: d010d010 PFM: 0001fff1 I/O: 00f0

BUS: 00:05:06 MEM: d020d020 PFM: 0001fff1 I/O: 00f0

BUS: 00:02:02 MEM: d000d000 PFM: 0001fff1 I/O: 2020

BUS: 00:03:03 MEM: d010d010 PFM: 0001fff1 I/O: 00f0

BUS: 00:05:06 MEM: d020d020 PFM: 0001fff1 I/O: 00f0

===================================

Please let me know the result from your machine. Thanks.

Chun-Nan

IOPCIFamily.info.only2.zip

Hi Chun-Nan,

Here is my dmesg under single user mode.

MAC Framework successfully initialized
using 7864 buffer headers and 4096 cluster IO buffer headers
IOAPIC: Version 0x20 Vectors 64:87
ACPI: System State [s0 S3 S4 S5] (S3)
Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
 BUS: 00:02:02  MEM: 00000000  PFM: 00010001  I/O: 0000
 BUS: 00:03:03  MEM: 00000000  PFM: 00010001  I/O: 0000
 BUS: 00:04:04  MEM: 00000000  PFM: 00010001  I/O: 0000
 BUS: 00:0a:0b  MEM: d020d020  PFM: 0001fff1  I/O: 00f0
[01] I/O: f0 
[01] MEM: d020 
 BUS: 00:02:02  MEM: 00000000  PFM: 00010001  I/O: 0000
 BUS: 00:03:03  MEM: 00000000  PFM: 00010001  I/O: 0000
 BUS: 00:0a:0b  MEM: d020d020  PFM: 0001fff1  I/O: 00f0
 BUS: 00:02:02  MEM: 00000000  PFM: 00010001  I/O: 0000
 BUS: 00:03:03  MEM: 00000000  PFM: 00010001  I/O: 0000
 BUS: 00:04:04  MEM: 00000000  PFM: 00010001  I/O: 0000
 BUS: 00:0a:0b  MEM: d020d020  PFM: 0001fff1  I/O: 00f0
PCI configuration changed (bridge=0 device=3 yenta=1)
Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
mbinit: done
Security auditing service present
BSM auditing present
From path: "uuid", 
Waiting for boot volume with UUID 4AD69838-01FC-32D5-AC59-20723C674F1C
Waiting on IOProviderClassIOResourcesIOResourceMatchboot-uuid-media
Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
Starting AppleACPIPS2Nub
Found mouse PNP device
AppleACPIPS2Nub startup complete
Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
IOPCCard info:   Intel PCIC probe:   TI XX12 rev 00
Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPIIXATARoot/PRID@0/AppleIntelICHxSATA/ATADeviceNub@0/IOATABlockStorageDriver/IOATABloc
kStorageDevice/IOBlockStorageDriver/ST980811AS Media/IOFDiskPartitionScheme/Untitled 2@2
BSD root: disk0s2, major 14, minor 2
IOPCCard info:   cs: cb_alloc(bus 11): vendor 0x14e4, device 0x4318
IOPCCard info:   cs: cb_alloc(bus 11): found 1 functions
IOCardBusDevice: binding socket 0 function 0 to card services.
IOPCCard info:   cs: cb_config(bus 11)
IOPCCard info:     fn 0 bar 1: mem 0xa0002000-0xa0003fff
IOPCCard info:     irq 20

Full dmesg also attached.

Thank you.

dmesg_kizwan_iopci_info2.txt

~Eureka · February 11, 2008

Hi snam11 and kizwan,

Here is the test IOPCIFamily. Try it and let me know the dmesg result under singleuser mode. If kernel panic happens, show me the picture if possible or let me know where it stops. Thanks a lot.

Again, don't forget to backup your original files while trying it.

Chun-Nan

IOPCIFamily.test.only.zip

OldSchool-c- · February 11, 2008

This is a message from Ethernet Broadcom. It appears when you restart from windows to mac

Thanks for you reply, but i have only the mac os on laptop.

The ethernet wire working well with the original file of the installation Kaly.

Working the WiFi also with the new iwi2200.

Bute when i put the kext of Chun-Nan i have the hang descript before (post #366).

Any idea ?

lele40 · February 11, 2008

Hi Chun_nan,

I have a Toshiba Satellite with a TI PCIxx12 CardBus Controller. I tried your IOPCCardFamily versions since the first release. From version 4 The cardbus started working but with an unusual issue, yet unresolved .

The IOPCCardFamily loads fine and my firewire port is correctly recognised but when I insert the wireless card in the cardbus, the system freezes. The wifi card is a D-Link DWL-G650 with Atheros 5212 Chipset. The strange thing is that the freeze doen't happen alway but 8 time on 10. The same if I load the system with the card inserted: It sometimes boots fine and I'm able to use the wifi connection and sometimes hangs after "Phy radio ver. 5.6" or after loading Xserver (the screens remains black or Mouse pointer appears but system freezes). When a freeze occous, if I remove the card from the slot, sytem resets from bios check.

I have to say that your IOPCCardFamily works fine in Tiger an with that I can use system almost well. The only issue I found in Tiger is that the card must be inserted after the system is loaded unless You wanna wait forever the Xserver boot.

Al last, I've tried every Leopard Installation combinations: with efi and vanilla kernel and with Toh patched kernel with same results.

Is it possible to solve the situation?

Thank's in advance

Slice · February 11, 2008

The ethernet wire working well with the original file of the installation Kaly.
Bute when i put the kext of Chun-Nan i have the hang descript before (post #366).

Any idea ?

So, it is one more message about conflict with ethernet.

Hi, Chun-Nan!

I think it's a time to discuss FireWire issue and find a key to anothers. :laser:

I analyzed Mariusz information. He tried my IOPCIFamily with the same rezult.

for me it works like rev3 from Chun-Nan

He have working FW if IOPCCard loaded manually.

Bus numbers and devices adrresses are all good in any case.

What is differ?

Ethernet with PCCard

	| |   |	 |   "IOInterruptSpecifiers" = (<1000000007000000>,<0700000000000100>)

Manually loaded

	| |   |	 |   "IOInterruptSpecifiers" = (<1000000007000000>,<0500000000000100>)

Firewire with PCCard

	| |   |   |	   |   "FireWire Device ROM" = <04259b9931333934e000a04200080da0d13f83df000927043800000403000a278100000717

Manually loaded

	| |   |   |	 | |   "FireWire Device ROM" = <041d26b531333934e000a02200080da0d13f83df00079a183800000203000a278100000517

Why the presence of IOPCCardFamily change "FireWire Device ROM"?

Next.

I have a message

IOPCI2PCIBridge: cardbus memory range 524288 bytes @ 0xf0907000

It is good message but it means that my algorithm of bus renumbering and addresses reassinging works at class IOPCI2PCIBridge which is replaced by AGPGart and IOPCCardFamily :blink:

What about FireWire driver?

I know the way to rewrite AGPGart. I need to include in it all IOPCIBridge with fine tuning. It is thousands lines of codes.

CardBus/PCMCIA PC Cards for Leopard

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites