[pre-release] macOS Tahoe

[surenmunoo]

8 minutes ago, PoMpIs said:

Guys, up until now I've been using an USB Ethernet card to keep things simple, and it works fine, but does the Intel i226v integrated onboard work in Tahoe?

 

The driver I'm trying, "AppleIGC.kext," isn't working for me. Does anyone have it working?

Same on Sequoia, the I226-V does not work for me

Edited June 12, 2025 by surenmunoo

[Anto65]

@miliuco  sorry but it's not updated the app , I don't see Tahoe or am I doing something wrong?

[lorys89]

Just now, surenmunoo said:

Same on Sequoia, the I226-V does not work. 

for me work i225v with appleigc 

[surenmunoo]

11 minutes ago, lorys89 said:

for me work i225v with appleigc 

What i found with the I226-V in Sequoia is that if you use the kexts and patch to get Broadcom wifi  working then the appleIGC.kext wont wrk and the I226-V Lan wont work but if you disable the patch for IOSskyfamily.kext and related kexts and patches then it works. 

[arsradu]

Hey guys,

I see we're getting a fix for kext injection compatibility for MacOS Tahoe according to this commit.

 

Has anyone tried the latest builds of OC on Tahoe? Did it make a difference to you guys? I tried one of the latest ones earlier today but didn't make a difference to me. Just curious if it did to you.

Edited June 12, 2025 by arsradu

[surenmunoo]

3 minutes ago, arsradu said:

Hey guys,

I see we're getting a fix for kext injection compatibility for MacOS Tahoe according to this commit.

 

Has anyone tried the latest builds of OC on Tahoe? Did it make a difference to you guys? I tried one of the latest ones earlier today but didn't make a difference to me. Just curious if it did to you.

I used the version as of last night for me and did not help. I did not check the release notes to see if this was available at the time though. 

 

[PoMpIs]

Just curious, because I haven't used a Hackintosh for a while now. I've barely used it since Ventura...

 

And I'm wondering, since when can the RX6000s work without WEG? ...

 

I accidentally disabled WEG due to a glitch, and the RX6650XT continues to work at 100%

 

[PoMpIs]

1 hour ago, lorys89 said:

for me work i225v with appleigc 

 

The i225v is good, but my motherboard has i226v... nothing works...🥲

 

[mnfesq]

So I solved my problem with my internal webcam not working.  I needed to reset the USB RHUB using SSDT-RHUB-Reset.aml.  I need to use this every time I boot into Tahoe.  When I don't use it, my USB ports detected looks like this:

 

 

When I use the RHUB-reset, it looks like this:

 

 

Maybe others with trouble getting all of their USB ports detected can try this method.  It's an option in the USBMap-tahoe-test app.

 

Oh, and another thing.  Sometimes it takes me 2 times to boot up.  I get into a boot loop and need to power off the laptop and restart.  So far, it will boot up correctly on the second try.  Also, my ethernet adapter is either going to sleep on me or stops working for some unknown reason.  I was able to get it to work again without rebooting by going into the networks settings for ethernet and making the service inactive and then reactivating it.

Edited June 12, 2025 by mnfesq

[lorys89]

@PoMpIsPut this bootarg pci=0x8000000 and reboot

The patches for am5 are broken, with bootarg you get back to working all 

Edited June 12, 2025 by lorys89

[lorys89]

You can also disable the kernel patches "Disable 10 bit tags" for am5 if you use bootarg 

[PoMpIs]

25 minutes ago, lorys89 said:

@PoMpIsPut this bootarg pci=0x8000000 and reboot

The patches for am5 are broken, with bootarg you get back to working all 

 

Well, it started with that boot flag, but in 30 seconds there is no more traffic, although the card is still active, I have to deactivate and activate it and it works again for another 30 seconds, and so on continuously.

 

Edited June 12, 2025 by PoMpIs

[miliuco]

2 hours ago, Anto65 said:

@miliuco  sorry but it's not updated the app , I don't see Tahoe or am I doing something wrong?

I just linked the repo, but I've been away for a few weeks and the app hasn't been adapted to Tahoe. There isn't much code to change. I'll get back home tomorrow and try to update it.

The original developer's repository has not been updated for 3 years.

[lorys89]

28 minutes ago, PoMpIs said:

 

Well, it started with that boot flag, but in 30 seconds there is no more traffic, although the card is still active, I have to deactivate and activate it and it works again for another 30 seconds, and so on continuously.

 

From the settings try it at 1000t

[LockDown]

6 hours ago, Takiller said:

I can now confirm that HD 620 is compatible, as I finally made it into Tehoa and VoodooI2C was the culprit all along.

 

 

What was the issue of VoodooI2C?

[PoMpIs]

1 hour ago, lorys89 said:

From the settings try it at 1000t

 

Thank you very much!! but it seems impossible, something is not right with this i226v, sometimes it works for 30 seconds, other times for 1 minute... but no more...

 

I have noticed and being in MacOS, if I disconnect the cable, MacOS does not notice and continues to mark the connection as working in settings/network 🤷‍♂️

 

 

Edited June 13, 2025 by PoMpIs

[surenmunoo]

@Cyberdevs Image below, stuck here now on the Z790. Seems that I need usb or bluetooth. Have enable the usb kext again but nothing

 

 

[Moviemakergr]

5 hours ago, Anto65 said:

Nice !  Update About-This-Hack

 

  Hide contents

 

Hey bro, please can sare your EFI folder ? i will try with i7 9700 and HD 630 too. Thanks..

 

[Takiller]

1 hour ago, LockDown said:

What was the issue of VoodooI2C?

It was preventing the installation to reach the login screen and I am still trying to figure out the way around this cause my mouse & trackpad are not working as we speak. I am still trying to figure out how to map my USB's, as the provided way in this forum is failing on my side.

[LockDown]

@Takiller

https://github.com/corpnewt/USBMap/tree/tahoe-test

As for the trackpad, its a race issue between the Voodoo and Apple's own driver 🤔. We have to wait till the 2nd release

Edited June 13, 2025 by LockDown

[Takiller]

15 minutes ago, LockDown said:

@Takiller

https://github.com/corpnewt/USBMap/tree/tahoe-test

As for the trackpad, its a race issue between the Voodoo and Apple's own driver 🤔. We have to wait till the 2nd release

After running the ./USBMap.command, I get "KeyError: 'port'" and I don't know what might be the cause.

[STLVNUB]

On 6/10/2025 at 5:40 PM, kidooe said:

 

My Problem

I Want To Do A CreatemediaInstll And Get It To Make A Bootable USB

Don't Work, Has Anybody Done This

If So, How?

 

Thanks For Your Time

 

Edit: Bug In The Forum I DID NOT CLICK ON QUOTE

 

edit1: Running The Install To Another Drive Worked

Now Need An Updated CloverX64.efi And OpenCore.efi From A Bootable System

On 6/10/2025 at 5:40 PM, kidooe said:

Can You Post Your EFI Folder Please

Edited June 13, 2025 by STLVNUB

[arya]

38 minutes ago, Takiller said:

After running the ./USBMap.command, I get "KeyError: 'port'" and I don't know what might be the cause.

 

for Me, i just 

xcode-select --install

 

download test repo, unzip, make +x and run 

 

 

[Max.1974]

On 6/12/2025 at 7:23 AM, ameenjuz said:

Please provide your mapped usb kext 

I have a same controller 

 

Hi @ameenjuz I apologize for not seeing your messages. There are many here, follow my Kexts. However, I also attribute part of the functionality to ACPIS. If you still haven't resolved it, please find attached. Sorry for the delay.

 

Here my EFI with Usb mapped kexts - please generate another serial number. 

 

Uploaded again (maybe occurs some problems on server, because shoe that was 29 numbers of downloads 

 

EFI-T14 TAHOE THBL-USBMAP.zipHere we go: 

 

Mediafire link: 

 

EFI-T14 TAHOE THBL-USBMAP.zip

 

 

 

Edited June 13, 2025 by Max.1974

[Max.1974]

Thanks!!